Professional Documents
Culture Documents
Dimensioned drawing
en 01-2016/06 50133232
12 - 30 V
DC
13mm
15 kHz
RGB transmitter
Maximum packing quality through short
response time
Automatic luster suppression
Multiple teach modes in one device
A Indicator diodes
B Teach buttons
C Display of the special functions
D Optical axis
We reserve the right to make changes • DS_KRT18BM_3_en_50133232.fm
Electrical connection
C UL US
LISTED IP 69K
IP 67
BR/BN
12 - 30 V +
Accessories: WS /WH
(available separately)
OUT 2
BL /BU
Mounting systems GND
SW/BK
(BTU 200M…, BT 95) OUT 1
GR /GY
Mounting adapter for standard design (80 n. c.
mm x 53 mm x 30 mm) BTX 018M
Cable with M12 connector
(K-D M12…)
Leuze electronic GmbH + Co. KG In der Braike 1 D-73277 Owen Tel. +49 (0) 7021 573-0 KRT18BM. …3… - 01
info@leuze.com • www.leuze.com
KRT18BM
13 mm
Operating principle
KRT Contrast sensor
Series
18B 18B series
Light source
M Multicolor RGB
Setting
3 Teach-in
Connection technology
M12 M12 connector, 5-pin
Leuze electronic GmbH + Co. KG In der Braike 1 D-73277 Owen Tel. +49 (0) 7021 573-0 KRT18BM. …3… - 01
info@leuze.com • www.leuze.com
KRT18BM
Order guide
The sensors listed here are preferred types; current information at www.leuze.com
Order code Part no. Features
Light spot orientation vertical (lengthwise),
KRT18BM.V3/G6X-M12 50131248
selectable additional function: light/dark switching
Light spot orientation horizontal (transverse),
KRT18BM.H3/G6X-M12 50131249
selectable additional function: light/dark switching
Accessories
BTX 018M 50133412 Mounting adapter for mounting on mounting devices for sensors in the standard design (80 mm x 53 mm x 30 mm)
Background Mark
>12s
L/D
>12s
>12s
>12s
L/D
L/D
L/D
2 … 7s
The static 2-point teach can be performed in the reverse order in an analogous manner (first teach the mark).
Background
>12s
L/D
>12s
>12s
>12s
L/D
L/D
L/D
7 … 12s
Leuze electronic GmbH + Co. KG In der Braike 1 D-73277 Owen Tel. +49 (0) 7021 573-0 KRT18BM. …3… - 01
info@leuze.com • www.leuze.com
KRT18BM
Briefly pressing the ’–’ button reduces the sensitivity of the sensor. In Briefly pressing the ’+’ button increases the sensitivity of the sensor.
the case of dark marks on a light background, the button must then be In the case of dark marks on a light background, the button must then
pressed once or twice if the mark is not reliably detected. be pressed once or twice if the sensor switches erroneously at locations
on the background.
>12s >12s
L/D L/D
LED on =
>12s OUT1 (Pin 4): low signal on mark
L/D OUT2 (Pin 2): high signal on mark
>12s
L/D
L/D
LED off =
>12s OUT1 (Pin 4): high signal on mark
L/D OUT2 (Pin 2): low signal on mark