Professional Documents
Culture Documents
714 18 351
type: ULB 110-4-1225-K177-40-1/2 -HC
equivalent to: ULB 4.3-4-48-K6.97-1.57-1/2 -HC
page # 1 / 2 tipping weight: 15-28 x 1000 lbs
Stage front view cylinder
diameters (inch) A 5.9"
4.3 ØC 5.1"
3.7 G1 20.2"
3.0 I 13.2"
2.4 K1 7"
M1 3.4"
ØP 3.5"
ØQ 2.1"
S 13.5"
ØW 1.6"
X 1.6"
1
including 0.79" pull-out [tol. -0.20"; +1.18"]
2
cylinder is delivered including oil inlet swivel adapter and cup
specifications tipping view
total stroke1 48 "
dry weight cylinder only 72.0 lbs
total volume 2.2 gallon
working volume 1.9 gallon
maximum pressure 2756 psi
maximum pump flow 11.6 gallon/min
maximum allowable thrust first stage3 24.3 klbf
oil inlet 1/2 BSP
technical notes
This cylinder is a lifting device only and may not be used as a
structural member or be subjected to side load. Side load
and/or poor alignment might result in cylinder leakage. Hyva
therefore strongly recommends the use of a cradle, even in
instances where the cylinder only tips to the rear or to the
side.
The cylinder is painted black RAL9005. For suitable hydraulic
oils, please refer to data sheet OIL-0011. For details of
available brackets and cradles, please refer to data sheet
015BRA07.
Detailed calculations can be made using the HYVA Tipper
Program, freely available from tipper.hyva.com.
3The cylinder thrust on the first stage (from the HYVA Tipper
tipping weight
AT 46 deg 52
PL 63 " 56
YCOG 18 " 18
ROH 18 " 18
BL 180 161 147 " 163 146 133
CYL w.r.t. COG (W) -9 0 7 " -8 0 7
Tipping weight for full stroke of 46° Tipping weight for full stroke of 52°
Tipping weight 15 18 21 x1000 lbs 16 19 23
Tipping weight for second last stage, up to 35° Tipping weight for 2nd last stage, up to 39°
Tipping weight 20 24 27 x1000 lbs 21 24 28
Subject to change without notice, no rights reserved. DO-U 71418351 / 17-12-11 / RV AA
HYVA CYLINDER
714 18 351
type: ULB 110-4-1225-K177-40-1/2 -HC
equivalent to: ULB 4.3-4-48-K6.97-1.57-1/2 -HC
page # 2 / 2