Professional Documents
Culture Documents
March 1, 2005
The following test program was performed at Lafleur Petroleum Services, Inc., located in
Weatherford, Texas. The test dates for this test were February 2nd – 4th. The information
contained in this report is, to the best of my knowledge, correct and accurate.
The cup that was used for the test was a 9-5/8” x 4.53” 47/53#.
Part number E109582WR45318.
These pressure ratings can be applied to all standard / non-machined packer cups with a
4.53” ID for the 9-5/8” Packer Cup line.
The weight ranges included are:
36/43#
40/47#
47/53#
This test was conducted at a 3rd party test facility in a controlled environment, using lab
equipment. The actual performance of the cup may or may vary in downhole applications
due to the wide variety of conditions and the many different “uses” packer cups are given to
perform.