eth of solid plate
619.886
Efficiency of the joint 100 = 85 Answer
Example 3.60 9
plates, 10 mm and-18 mm thick are connected by a double cover butt ort using 6 mm cover
Fig. 3.20. Find the strength of the join. Given M20 bolts of grade 4.6 and Fe 415Note: Thicknes
Design siren
Design strengt
Strength of
Strength of pl
Design sire
shear strength of 6 bolts in the Design streny
Example 27 4
Design a lap jo
Strength of bolts in beanng and the other is
rs aieleii st Use bearing ty
Using M16
Strength of
Since it is }
NomitDesign strength of the joint
Design a lap joint between the two plates each of width 120 mm, if the thickness of one plate is 16 mm
land the other is 12 mm. The joint has to transfer a design load of 160 KN. The plates are of Fe 410 grade.
Use bearing type bolts.
Using M16 bolts of grade 4.6,
Strength of a bot:
U Since cis lap joint bot isin single shear, the critical section being atthe root oF bol