Professional Documents
Culture Documents
‚_,-_--‚-„7--__
10.3.6 Design axial s'trength 1an of compression members shall not be taken .
greater than 01%, max. computed by Eq. (10-1) or (10-2).
‘S’
2V
10. 3. 6.3 For prestressed members, design axial strength, ¢Pn, shall not be taken
greater than 0.85 (for members with spiral reinforcement) or 0.80 (for members with
tig. reinforcement) of the design axial strength at zero eccentricity, (hPa.
$103.7, Members subject to compressive axial load shall be designed for the maximum
moment that can accompany the axial load The factored axial force Pu at given
eccentricity shall not exceed that given in 10. 3. 6 _The maximum factored _ »
moment Mn shall be magnified for slenderness effects in accordance with 10.10.
, l
_ 10.41 Spacing of lateral supports for a beam shall not exceed 50 times b, the
hast width ofcompression flange or face.