Professional Documents
Culture Documents
Problem Description
Figure 1 shows the cantilever beam with a load acting on the free end. A static analysis is performed on
the model. Beam deflection at the free end of the beam, and shear stress at the constrained end of the
beam are determined. All dimensions are in inches.
P
y
480
z x
x vm2_1.nas
Model Data
Units
inch/pound/second
Model Geometry
Length: L = 480 in
Material Properties
Boundary Conditions
One end of the beam is constrained in all translations and rotations. A load P = 50,000 lb force in the
negative Y-direction is set at the free end of the beam.