You are on page 1of 2

Recruitment Test Question of Bangladesh Ordinance Factory (BOF)

Compiled by: Rony Parvej (IUT, EEE’07)


Post: Assistant Engineer (Electrical)
Time: 60 minutes Full Marks: 100
Exam Date: 28.02.2014 Venue: Gazipur Cantonment college
[ আমি এই পরীক্ষা মিইমি । আিার এক কমিগ আর এক ফ্রেন্ডের কাছ ফ্রেন্ডক সংগৃহীত প্রশ্ন এখান্ডি তুন্ডি মিিাি । পরীক্ষায় ফ্রকাি িি-মিপার্টন্ডিন্টাি প্রশ্ন মছিিা । ১৩ র্া
মিমখত আর ১৩ র্া নির্বটযমিক প্রশ্ন মছি]

1. Why induction motor is called rotating transformer? 5


2. Explain the effect of under excited and over excited synchronous motor with diagram. 10
3. Write down the causes and disadvantages of low power factor. 10
4. In the following series resonance circuit find: 5
(a) capacitance at resnance and (b) Voltage across the capacitor.

5. Draw the vector diagram of transformer in unloaded and inductively loaded condition. 10
6. Find Rab the following circuit: 5

7. Find I1 using super-position theorem: 5


8. A motor has 4% slip, ...% voltage regulation, ... W windage loss and ... W friction loss.
Find: (a) Armature input (b) terminal input. 5
9. Find IC and VBE in the following circuit. 5

10. Draw the diagram of a push-pull amplifier? Explain it’s operation. Why is it called so? 10
11. Abbroviate the following words: 0.5 x 10 =5
CDMA, USB, GPRS, TT, IGFET, VLSI, CMRR, EPROM,
12.
13.
MCQ
1. DC generator operates in-
(a) lap winding (b) wave winding (c) both (d) none
2. What is the relation between XL and XC bellow resonance frequency-
(a) X L > XC (a) XL = XC (a) XL < XC (a) none
3. What is the unit of mmf.

(a) ( ) ( ) ( )

You might also like