Professional Documents
Culture Documents
PAGE01
Drum set : Assembly Instructions
Before starting.
Each page of the "Parts sheet" has a sheet number in the top left-hand corner (Sheet
No.1~No.22). Work in order of these sheet numbers. (The parts for assembly are on pages 2 ~ 22.) PAGE03 Align the marker lines on 3A
Bass drum and 3B with the glue spots on
There are 384 parts in total, and each part is numbered according to its page. 3C ~ 3H, and attach.
Also, the glue spots on each part are marked with the number of the part to attach to them.
The numbers ~ in the Assembly Instructions indicate the order to attach parts. Follow
this order when attaching.
When one part has multiple spots to attach, or glue spots for attaching other pieces, colors
( ) and numbers are used to show the precise location and method for attaching.
Check the diagrams in the "Assembly Instructions" carefully for each part as you work.
PAGE02
Bass drum
Front side
Upper part
Front side
Diagonal line
Lower part
Seam
Front side
*Attach to the display stand later. Back side
PAGE02
Drum set : Assembly Instructions
PAGE04 PAGE05
Bass drum Bass drum
Seam line
Inside Align the seam lines and Wrapping the piece around
insert the pieces inside a thin cylindrical object will
each other, and attach to result in a neater finish.
the specified position.
Face the seam line
inwards and insert the
Upper part
piece to the position specified. *Attach the back. PAGE06 *Be sure to align the thick black marker lines
on the top and bottom (circled here in blue)
Tom-tom 13" x 10" when attaching.
PAGE03
Drum set : Assembly Instructions
Upper part
Lower part
*Before attaching parts 6O and 6P, bend them into shape as shown in the diagram.
*Begin from the opposite side to the seam. *Begin from the opposite
Specified position
side to the seam.
Upper part
Upper part
Specified position
Lower part
Take note of
the markings *NB:
Upper part
There are 12 7R parts altogether.
One of them, marked 7R-1, has a
*Do not apply glue to . specific location for attaching.
PAGE04
Drum set : Assembly Instructions
PAGE02 03 04 05 06 07 PAGE08
Bass drum / Tom-tom 13" x 10" / Tom-tom 12" x 9" Floor tom *Begin from the opposite
side to the seam.
Upper part
Shell
Lug
Tom holder
Head
Seam
Lower part
PAGE05
Drum set : Assembly Instructions
Upper part
*Be sure to align the thick black marker lines
PAGE09 Align the marker lines on 10A
and 10B with the glue spots on
on the top and bottom (circled here in blue)
when attaching.
Floor tom 10C ~ 10H, and attach. *Take note of where
the thick marker line is.
Lower part
Lug
*Align the snare
wire position here.
Shell
Lug
PAGE10
*Begin from the opposite Rubber arm
Snare drum side to the seam.
Upper part
Stand
Snare drum
Lower part Rubber foot
*Roll up and attach.
Seam
*Before attaching parts 10R and 10S, bend them into shape as shown in the diagram. *NB: There are 8 10T parts altogether.
PAGE06
Drum set : Assembly Instructions
*Align the reverse
sides and attach.
PAGE12 PAGE13 *Align the reverse
sides and attach.
Ride cymbal *Align the
Crash cymbal
reverse sides
*Align the reverse and attach.
sides and attach.
Die-cast joint
Die-cast joint
Rubber foot
Rubber foot
PAGE07
Drum set : Assembly Instructions
PAGE14 PAGE14 15
Hi-hat cymbal Hi-hat cymbal
Extension rod
Hi-hat clutch
*Align the seams *Align the seams
and attach. and attach.
Hi-hat cymbal
Stand
Foot pedal
PAGE08
Drum set : Assembly Instructions
PAGE15 PAGE16
Drum pedal Drum stool
*Align the reverse sides and attach.
Leg
Felt beater
*The felt beater moves when you press the foot pedal.
PAGE09
Drum set : Assembly Instructions
PAGE17 18 19 PAGE21 22
Display stand Display stand
PAGE20 21
Display stand
Ride cymbal
Crash cymbal
Hi-hat cymbal
Drum stool
Bass drum
Drum pedal
*The completed photo is an image of a basic drum set. The parts can be arranged to your liking.
PAGE10