You are on page 1of 6

Classic Car Series : 04

Mercedes Benz

Assembly
Instructions

500K

View of completed model

* This model was designed for Papercraft and may differ from the original in some respects.

Assembly tip

Tools

Write the number of each part on the reverse side of the part in pencil upon
cutting it out, to be sure you can tell which part is which later.
Before gluing, crease the paper along mountain and valley fold lines. Trace
along the folds with a ruler and an exhausted ballpoint pen (out of ink) to get a
sharper fold.
Make sure rounded sections are nice and stiff.

Scissors
Ruler, Set square
Glue (Wood glue or craft glue recommend)
Exhausted ballpoint pen (out of ink)
Toothpicks (for use in applying glue)
Tweezers (useful for handling small parts)
Pencil

Key to symbols
Dotted line

Dashed and
dotted line
Solid line

Scissors mark

Mountain fold

Fold so that the printed pattern faces outside.

Dots indicate parts to be glued;


dotted lines indicate approximate area for
application of glue.

Valley fold

Fold so that the printed pattern faces inside.

Cut a notch
along this line.

Cut along the center of the line.

Cut a notch
along the line.

Cut these areas out.

Assembly Instructions : Six US letter sheets (No.1 to No. 6)


Build this model with careful reference to the Assembly Instructions.

Red dot

Glue parts with the same number together.

Green dot

Glue areas within the same part together.

Blue dot

Glue to the reverse side of the specified part.

Glue, scissors and other tools may be dangerous


to young children so be sure to keep them out of
the reach of young children.

Mercedes Benz 500K

Assembly
Instructions

Carefully shape curves.

Carefully shape curves.

Affix with glue.


Carefully shape curves.
Affix with glue.

Do not
glue here.

Affix with glue.

Do not glue here.

Shaded areas in diagrams indicate reverse side of parts.

Mercedes Benz 500K

Assembly
Instructions

Carefully shape curves.

Align fold lines


and flaps and
glue together.

Shaded areas in diagrams indicate reverse


side of parts.

Mercedes Benz 500K

Assembly
Instructions

*Note different numbers for left and right parts.


*Diagram is R.

Carefully shape curves.

Carefully shape curves.


*Note different numbers for left and right parts.
*Diagram is R.

*Right side

*Left side

Shaded areas in diagrams indicate reverse side of parts.

Assembly
Instructions

Mercedes Benz 500K


*Note different numbers for left and right parts.
*Diagram is R.
Carefully shape curves.
top

Confirm top/bottom before gluing.


Pay attention to the direction
of gluing.

top

Viewed from above

Front
Confirm top/bottom before gluing.

Affix with glue.

Carefully shape curves.


*The numbers inside the parentheses are given to the
parts for lights with a small center.

Carefully shape curves.

Affix with glue.

*Left side
*Right side

Affix with glue.

Carefully shape
curves.

Fold it in half, and catch the pasting margin of Part 52 and glue.
*Pay attention because the part numbers of the left and right are different.

Shaded areas in diagrams indicate reverse side of parts.

Mercedes Benz 500K


Glue in order,

Assembly
Instructions
Arrow indicates 'up'.

Pink flap indicates outer side.


Arrow indicates 'up'.

Affix outer surface of tire like a bowl,


then wait until glue is dry before gently
pulling the tire into shape.

Confirm top/bottom
before gluing.

The joining part is the


lowest point.

Pink flap indicates outer side.

Top

The joining part is the lowest point.


Apply glue around the mountain fold
lines and adhere them.

Affix outer surface of tire like a bowl,


then wait until glue is dry before gently
pulling the tire into shape.
The joining part is the lowest point.

Affix all four tires, adjusting to


be sure they touch the ground.

Shaded areas in diagrams indicate reverse side of parts.


Glue in order,

Joint should be positioned at the top.

Arrow
indicates 'up'.

Affix outer surface of tire like a bowl,


then wait until glue is dry before gently
pulling the tire into shape.

Joint should be positioned at the top.


Confirm top/bottom before gluing.
Pink flap indicates outer side.

Top

You might also like