Professional Documents
Culture Documents
PROFILCO PR-63S
Our company applies ISO 9001 system carry Η εταιρεία μας τηρώντας το σύστημα ISO
out tests on the extruded profiles by the 9001, διενεργεί έλεγχο στα προϊόντα στο
Department of Production and Quality Τμήμα Παραγωγής και το Τμήμα Ποιοτικού
Control according specifications of ELOT Ελέγχου βάσει προδιαγραφών του ΕΛΟΤ
EN 12020-2, ΕΝ 755.02 and DIN 17615 for ΕΝ 12020-2, ΕΝ 755.02 και DIN 17615 για
the geometry of extruded mill finish profile τα γεωμετρικά χαρακτηριστικά του άβαφου
and those of QUALICOAT for the powder προφίλ και του QUALICOAT όσον αφορά
coating. την επικάλυψή τους.
ALUMINUM PROFILES
ΠΡΟΦΙΛ ΑΛΟΥΜΙΝΙΟΥ
Alloy EN AW 6060 (Al Mg 0.5Si) used for the
production of profiles has the following Για τη παραγωγή των προφίλ
technical characteristics: χρησιμοποιείται κράμμα ΕΝΑW 6060
Heat treatment: T5 (Al Mg 0.5Si) με τα παρακάτω τεχνικά
0.2% Proof Stress: RP0.2 = 185 Μpa (min) χαρακτηριστικά:
Ultimate tensile strength: Rm = 220 Μpa (min) Θερμική κατεργασία: Τ5
Density: Y = 2,69 gr/cm3 Όριο διαροής: RP0.2 = 185 Μpa (min)
Elastic modulus: Ε = 70.000 N/mm2 Όριο θραύσης: Rm =220 Μpa (min)
Coefficientlinear expansion: Ειδικό βάρος: Y = 2,69 gr/cm3
α=2,34x10-6 /K Mέτρο ελαστικότητας: Ε = 70.000 N/mm2
Minimum elongation:Α50mm% = 8 (min) Συντελεστής γραμμικής διαστολής:
α = 2,34x10-6/ K
Παραμόρφωση θραύσης:Α50mm% = 8 (min)
GEOMETRICAL CHARACTERISTICS
ΓΕΩΜΕΤΡΙΚΑ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ
Dimensions
The tolerances of dimensions (wall thickness Διαστάσεις
and all the rest dimensions) follow the Οι ανοχές των διαστάσεων (πάχος και όλες οι
specifications of EN 12020-2 e.g. if we have υπόλοιπες διαστάσεις) ακολουθούν τις
55 mm dimension the tolerance is (+/-) 0.40 προδιαγραφές του ΕΝ 12020-2 π.χ. εάν
mm, which means that the dimension is έχουμε μια ονομαστική διάσταση 55 χιλ
between 54,60 and 55,40 mm. δίνεται ανοχή (+/-) 0,40 χιλ. το οποίο
σημαίνει ότι κυμαίνεται από 54,60 έως 55,40
Twist χιλ.
By the specifications of EΝ 12020-2 for a
profile bar with width no more than 75 mm the Στρέβλωση
deviation is 2 mm. The twist is measured by Σύμφωνα με τις προδιαγραφές του ΕΝ
placing the bar on a flat base plate and 12020-2 για ένα προφίλ με πλάτος μέχρι 75
measuring the maximum distance at any point χιλ. η απόκλιση είναι 2 χιλ. Για να ελεγχθεί η
along the length between the bottom surface στρέβλωση πρέπει η βέργα να τοποθετηθεί
of the bar and the base plate surface. σε επίπεδο πάγκο και να μετρηθεί η μέγιστη
απόσταση σε οποιοδήποτε σημείο της
βέργας μεταξύ της κάτω επιφάνειας αυτής
και του πάγκου.
MAY - 2015 A1
PROFILCO PR-63S
According Ευθύτητα
By the specifications of EΝ 12020-2 for a 6 Σύμφωνα με τις προδιαγραφές του ΕΝ
meter bar the allowed deviation from 12020-2 για μια βέργα 6 μέτρων, το
straightness is 3 mm and is measured with the επιτρεπόμενο βέλος είναι 3 χιλ. και ο έλεγχος
profile bar placed on horizontal base plate, so γίνεται στηρίζοντας τη βέργα στις δύο άκρες
that its own mass decreases the deviation. The της πάνω σε έναν επίπεδο πάγκο. Το βέλος
deviation in the middle of the bar must not στη μέση της βέργας δεν πρέπει να είναι
exceed the 3 mm. πάνω από 3 χιλ.
Hardness Σκληρότητα
The profile's hardness is tested according the H σκληρότητα των προφίλ ελέγχεται
specifications of EN ISO 6506-1. σύμφωνα με τις προδιαγραφές ΕΝ ISO
6506-1.
Tolerances Αποκλίσεις
Weight that is shown in present catalogue, is Το βάρος που εμφανίζεται στον κατάλογο
the theoretical weight of mill finish profile. είναι το θεωρητικό βάρος του άβαφου
There is a tolerance between the theoretical προφίλ.
and the actual weight, which is up to (+/-)6%, Υ π ά ρ χο υ ν α π ο κ λ ί σ ε ι ς μ ε τ α ξ ύ τ ο υ
and the additional weight due to color is up to θεωρητικού και του πραγματικού βάρους
3-5 %. που φτάνουν το (+/-) 6% ενώ το
προστιθέμενο βάρος από την βαφή φτάνει
στο ύψος του 3-5%.
A2 MAY - 2015
PROFILCO PR-63S
MAY - 2015 F1
PROFILCO PR-63S
CODE : AA052-920
CODE : AA113-005
Plastic plug for Aluminium hinge double
water drip 52-920 Μεντεσές διπλός
Πλαστική τάπα νεροσταλάκτη 52-920
CODE : AA052-554
CODE : AA113-086-02
F2 MAY - 2015
PROFILCO PR-63S
MAY - 2015 F3
PROFILCO PR-63S
CODE : AA109-124-00
CODE : AA109-125-00
F4 MAY - 2015
PROFILCO PR-63S
CODE : AA114-363
MAY - 2015 F5
PROFILCO PR-63S
CODE :AA010-015
CODE : AA052-007
CODE : AA010-002
CODE : AA052-068
F6 MAY - 2015
PROFILCO PR-63S
CODE : AA331-007
Brushes No 7mm
Βουρτσάκι 7 χιλ.
CODE : AY003-004
CODE : AT037-003
CODE : AY003-001(1lt)
AY003-005(310ml)
CODE : AT038-102-07
MAY - 2015 F7