Professional Documents
Culture Documents
Frames are made out of ERW tube conforming to IS 3074 and 7138 of 1973.
Mechanical Properties:
Dimentional Tolerance :
Pre treatment : i.e., degrease, de-rust and phosphated prior to powder coating.
Property & Range Hardness (pencil) / HB – 7H, Impact Resistance (in labs) / 60 –
160 Gloss ( 60 degree meter ) / 11 – 18% Colour – salt spray / 1000 hrs. minimum
cure range. (Type 2 MLL) (0.05mm) / 3 min. @ 450 F (232 D) Film – time at metal
Tem / 25 min @ 220 – 250 F (121 c).
Epoxy barger ultra coat is used which is manufactured in collaboration with world
leader NV of Holland and Hoechst AG, Germany adhering to international standards.
Nickel plating is carried out on Nickel Sulphate bath at 600 degree C temperature with
continuous air agitation and filtration at a current of 4 Amps / sq.ft.
5. Frame height adjustable Knob : are made out of modified PCL synomate ABS/PC
alloy grade M – 850 jet Block.
6. Cushion Seat and back : are made out of 0.8mm CRCA sheet cushioned with 25mm
thick PU Foam of density 26.
7. Head rest : are cushioned with 50mm thick PU foam of density 36.
9. Three seater (Tandem) chair can be sent in knock down condition and can be
assembled at site.