‘SMART
SENSOR® Model: AR63A
Vibration Meter
User's Manual
Version Number, S264Precauction
> Thank you for purchasing our company's Vibration
Meter
> This manual provides relative information on how
toluse the unit and warnings in operation
> To make the best use ofthis product's functions,
read this manual thoroughly before use. Please
keep this manual for quick reference.
> Please make some simple test measurement to
fensure proper performance of the unitWarranty
1). About relative warranties please read warranty card,
2). We disclaim any liability due to: client's transportation
damages; incorrect use or operation;
‘manipulation, alterations or repair attempts; without
warranty card, invoice.
statement
‘a. We reserve the rights of upgrading ang amending
the design ofthe product as well as the manual
Updating, and the product is subject to change
without any further notification,
. Dispose of battery should be in accordance with
local laws and regulations.
a
IntellfSate Cé
19.
Contents
1. Before use
> Specifications
> Diagram ofthe product -
PCD displays
2.Operation
Selecting measurement way
2 Battoryinstalimor
Starting the unit ang check-up battery
} Selecting measurement mod
> Selecting hgviow frequency:
(14)
3. Other items
attentions
Maintenance and warranty
Dstatement1. Before use
Check-up
Carefully unpack yourkit and ensure that you have.
the following tems. In case that any tem is missing or
{tyoutind any mismatch or damage, promptly contact
your dealer.
> Vibrotion meter Pes
PV battery Pes
> English user's manual Pes
> Warranty card Pes
> Longprobe Pes
> Pouch Pes
> Aluminum packing box Pes
Maintenance and warranty
Maintenance:
1), Replacement and upkeep of battery
2.After poweron, ifanican () appears onthe LCD,
youneed to replace the battery immediately, for details,
please refer figuras and contents on page 9 of this
manual
b. Remove the battery rom the unitifits not required for
‘extended periods of time in order to avoid damage t
the battery compartment and the erosion resulting
froma battery leakage.
2. Donot store or use the unit in following circumstances:
8a. Splashes of water or high levels of dust.
b.Airof high salt or sulphur content
«Air mixed with other gases or contents,
4. High temperature or humidity (above50'C, 90%.) oF
direct sunlight.
3. Do not disassemble the unit or attempt any internal
alterations,
4, Never use alcohol or diluents to clean the housing
for doing that will especially erode the LCD surface:
just clean the unit lightly as needed with litle clean
water.
“183.Other items
Attentions
A warning
When making measurements on exposed rotating
parts or power train parts of machinery, proceed
with utmost care to prevent accidents due toga
ng caught in the machinery.
AxCaution
Tf the unit shook excossively, the receiver may
produce extremely high sound pressure that
hurts human ear, be careful in process of using
the signal output plug.
Introduction
This product adopts piszoslectric effect of artical po-
larized ceramic for design. itis suitable for monitoring of
all kinds of vibrating mechanical facility, specially the
vibration measurement of rotating and reciprocating
machinery. The unit can measure acceleration, velocity
‘and displacement, which is widely used in mechanical
manufacture, electric power metallurgy and general
aviation ete, Field
Features
> Visually displays measurement value and state
} Acceleration, velocity and displacement measurement
> Different vibration frequency selection
> High sensitivity probe for accurate measurement
> Provides long and short probe head ,each ono Is
suitable for different situation measurement,
> Equipped with AC signal output interface
> Low power indication function
> Auto power-off function
> LD backlight
> Simple touse, the structure is compact, portable for
carrying along with measurement
-02-Specifications
real aaane Teoma
hisses atone irae WithoutAccessory
amare aT
trdopacenent fecndapienens ange siniedy =
coenonsh oni g
amen neang — [tia = Accessory §
raat Yin) 3 ”
apse 5
issn ey — TOT 3
neste é
mgt ascent
prope — [Ta rowseon
fbi isagtaan Ace
singer [esirpeace utr mer ctones
Jonecomeed
ie cone Frequency hz
apne RISA — so a firenge
fesagtntee Pe 9
Soria treo
hae gota
03 “16.8. Contact resonance in acceleration measurement:
(worked with FFT signal analyzer)
Diagram of the main unit
15
iq
5 WithoutAccessory
s| Recessory S
Response (db)
aoe
5| Recoseory L
—
Z00 400600800 1x
Frequency(Hz)
Lorange4).LeD screen
2), Probe
2). @) Frequency feature selection key only n
acceleration measurement)
4). {69 Measurement mode (acceleration / velocity /