Professional Documents
Culture Documents
D - Bentley Communities
Hi,
I'm trying to design a HXB connection bewteen the members of the picture, but I get the following message
.What could I be doing wrong?.
I already tried to erase the horizontal beam but problem still exists. thanks.
cruce1.STD
Top Replies
Offline
Seth Guthrie
Mon, Dec 28 2020 4:07 PM
in reply to Seth Guthrie
+1
Horizontal bracing connections require that the members be assigned a “Member Attribute” to designate th…
Offline
Seth Guthrie
Wed, Dec 23 2020 5:43 PM
The message indicates that you are trying to assign the VXB connection type which is for a joint in a
vertical brace. Whether assigning the VXB or an HXB connection a node is required where the braces
https://communities.bentley.com/products/ram-staad/f/ram-staad-forum/207734/how-to-design-a-horizontal-x-braces-connection-hxb-in-staad-pro 1/3
8/31/2021 How to design a Horizontal X braces connection (HXB) in Staad Pro - RAM | STAAD Forum - RAM | STAAD - Bentley Communities
intersect. The main problem in your file is that there is also a beam present (6 members from the
central node) and we don't have a horizontal brace type connection for that yet.
Offline
Camilo Andrés Carvajal Villamil
Wed, Dec 23 2020 6:08 PM
in reply to Seth Guthrie
Anyway, I did a test deleting the beam to obtain only 4 members from central node and still the
error persists. In addition, the message says that it is a VXB connection but actually I select
HXB type connection.
Offline
Seth Guthrie
Wed, Dec 23 2020 6:30 PM
in reply to Camilo Andrés Carvajal Villamil
Something appears to be broken. I'll pass it along to our developers for confirmation.
Offline
Seth Guthrie
Mon, Dec 28 2020 4:07 PM
in reply to Seth Guthrie
https://communities.bentley.com/products/ram-staad/f/ram-staad-forum/207734/how-to-design-a-horizontal-x-braces-connection-hxb-in-staad-pro 2/3
8/31/2021 How to design a Horizontal X braces connection (HXB) in Staad Pro - RAM | STAAD Forum - RAM | STAAD - Bentley Communities
One thing we’ve found, however, is the process of assigning member attributes has
problems. For example, in this model whenever I tried I got a message saying “no
member selected” and ended up having to manually write the command into the Editor:
cruce1rev.STD
Offline
Camilo Andrés Carvajal Villamil
Mon, Dec 28 2020 4:15 PM
in reply to Seth Guthrie
It worked perfectly, thank you very much Seth.
https://communities.bentley.com/products/ram-staad/f/ram-staad-forum/207734/how-to-design-a-horizontal-x-braces-connection-hxb-in-staad-pro 3/3