—~_ oom
LUSTS OF TOOLS & EQUIPMENTS:
1. AIR COMPRESSOR
2, WELDING GENERATOR
3. AIR RECEIVER (BIG)
4, AIR RECEIVER (SMALL)
5. CLEMCO AIR FILTER
6. SAND POT
7. BLASTING HOOD with Cape
8, BLASTING HOSE with Nozzle
9. GRACO PUMP with Gun
10. ANGLE GRINDER (BIG)
11. ANGLE GRINDER (SMALL)
412, PNEUMATIC GONDOLA with ROTATING BOOM
13. MOBILE SCAFFOLDING SET
14, TUBULAR SCAFFOLDING (BS)
15. COUPLER SWIVEL (BS)
16. COUPLER FIXED (BS)
17. FULL-BODY HARNESS (MSA)
18. SCBA (MSA)
19. MSA ALTAIR 4XR MULTIGAS DETECTOR with Certificate of Calibration
20. LEVER BLOCK (1.5 TONS) with Certificate
21, SINGLE PULLEY (3.2 TONS) with Certificate
22. SINGLE PULLEY (1 TONS) with Certificate
23. SHACKLE (3.25 TONS) with Certificate
24, SHACKLE (4.75 TONS) with Certificate
25, OXY-ACETYLENE CUTTING OUTFIT
26. EYE-WASH
Scanned with CamScannerA
(A Company of Manila Machinery and Supply Co., Inc.)
49, 2nd St, Barangay Kaptolyo, Pasi City, 1603, Metro Manila, Philippines
“Tal # 8470-4732 / 8470-6048 Fax: 8637-2108 Technical: 6891-5131
LULTRA-SEER NC. Emel; markotng@ulraseercom Website: werw.lvaseer.com
EEI CONSTUCTION AND MARINE INC, September 11, 2020
langgahan St. Bagumbayan_ |
tis, Quezon City
CERTIFICATE OF CALIBRATION
“Tis isto certty that your MSA Alta 4XR MultiGas Detector, with Serial No. 00114771 K19 has been Inspected
‘and fuly cafbrated using gas micure with NIST traceable weights
JBRATION DETAILS:
Using Calibration Gas: PN: 10150595 (58% LEL, 15% 02, 60PPM CO, 20PPM H2S) Lot No. 1162924
NSKALTAR OR
MutiGas Detector
“SENSOR "ACCEPTABLE RANGE [INSTRUMENT READING: REWARRS,
Passed
Combustbe 55to 61% LEL 58% LEL oe
Passed
en 1“ 2 15:
Ong 00 160% 0, 0%0, i
Passed
Carton Monoride 571063 ppmCO 60 pem CO ae
18 to 22 20, iH; Passed
Hydrogen Sule Pens Pens seed
‘Abump test must be performed on the instrument before each day's use to verify thatthe instruments
‘operating propery 2s specified in the instument intructions and in eccordance with OSHA recommendations.
Very try yours,
ULTRA - SEER INCORPORATED
ea Mame
PATRICK HENRY S. MAGPAYO RICSAN C. ANDA
Technician Technical Head
Scanned with CamScannera CH EC corporation
CRANE ano HEAVY EQUIPMENT CERTIFICATION
$265 Constagcee, Olympia, Mabety 1207, Philipines el (+61 2) X94 OOKT / 809 46S Fan: (963 2) 896 728
Accrodited Testing Organization - COLE-BWC Accreditation No. 1410-180223 18-0015
(CERTIFICATE —————
Issued To EEL Construction and Marie, Incorporated
12 Manggahan St, Bagumbayan, Quezon City’
Test Conducted VISUAL, SAFETY FUNCTION & LOAD Trst
Location Fabrication Shop
Bey. Maguyam, Silang, Cavite
tem Description LEVER BLOCK
Capacity ~1.S tons
Mfg. By: Yale
Seri No. ECMICPE
Color Yellow
Sue 8 mm diameter
Length 1S meters long
Safe Working Load 1.5 Tons
‘Test Method Standard ASMEVANSI 30.21
Test Result SATISFACTORY
Remark / Note None
| cerufy that on February 25, 2021, a thorough visual, safety function and load testing for the
equipment described above was conducted Mt was found to be in satisfactory operating
condition. Load testing using an applied load of 1.5 tons was conducted on the above described
lifting appliance and held the test load for fifteen (15) minutes. It was found to be in satisfactory
operating condition.
Taleo certify that this is a true report of the result
espectors Gener) Mager
Ceniieate No CLA.2021-0720
Vat Und Februty 25,2022
‘ep ts eh bt a set rs enn er i a egress on
SSS SES hls TOS SR RS
Scanned with CamScanneraf CHEC CORPORATION
CRANE ano HEAVY EQUIPMENT CERTIFICATION
£263 Constancia, Olympia, Makati 1207, Philippines tel: (463 2) #99 0067 / 899 0465 Fax: (463 2) 896-7283
Accredited Testing Organization - DOLE-BWC Accreditation No. 1410-18030415-0015
C CERTIFICATE
Issued To + EET Construction and Marine, Incorporated
12 Manggahan St., Bagumbayan, Quezon City
Test Conducted ‘VISUAL, SAFETY FUNCTION & Lob Test
Location + Fabrication Shop Blectrical Area
Bay. Maguyam, Silang, Cavite
lem Description : SINGLE PULLEY
Copecity —:3.2 tons
Serial No, : ECMISP-3.2T 1707
Working Load Limit : 32 Tons
Test Method/Standard 2 ASME/ANSI B30.26
Test Result : SATISFACTORY
Remark / Note 2 None
1 certify that on Mar.19, 2021, a thorough visual, safety function and load testing for the
‘equipment described above was conducted. It was found to be in satisfactory operating
condition, Load testing using an applied load of 3.2 tons was conducted on the above described
Jifting appliance and held the test load for fifteen (15) minutes. It was found to be in satisfactory
‘operating condition.
also certify that this isa true report ofthe result.
Inspected By: Noted By:
YO JAMES F. PORTER, JR.
General Manager
CenifeaeNo. = CLA-20212092
Vaid Until: Mar 19.2022
“hci et iy fre aa cae ye ia cnn catenins nn
wesc pasar asa nay cies he a magn a yaaa nb a
‘Spina’ see oy ed pay who ae ay snd tone pinion a ae mse weapon Sn
‘Stetina ga oro beef Ge epmine
erin etn ate edi pach cn ini inne nh ee erry ened he dana b l ae
Scanned with CamScannerws CHEC CORPORATION
CRANE ano HEAVY EQUIPMENT CERTIFICATION
Olympia, Makati 1207, Philippines tel: (463 2) 899 0067 / 899 0465 Fax: (463 2) 896 7283
Accredited Testing Organization - DOLE-BWC Accreditation No. 1410-15030415-0015
CERTIFICATE
Issued To 2 REI Construction and Marine, Incorporated
12 Manggaban St., Bagumbayan, Quezon City
Test Conducted 2 VISUAL, SAFETY FUNCTION & LoaD Test
Location 2 Fabrication Shop - Electrical Area
Bgy. Maguyam, Silang, Cavite
Item Description 2 SINGLE PULLEY
Capacity <1 ton
Setial No. : ECMI SP-0518-01
Working Load Limit 2 1 Ton
Test Method/Standard + ASME/ANSI B30.26
Test Result : SATISFACTORY
Remark / Note : None
| certify that on Mat.19, 2021, a thorough visual, safety function and load testing for the
equipment described above was conducted. It was found to be in satisfactory operating
condition, Load testing using an applied load of 1 ton was conducted on the above described
lifting appliance and held the test load for fifteen (15) minutes. It was found to be in satisfactory
‘operating condition,
Talso certify that this is a true report of the result.
ei ne
“Khe sal Mn
and elitr
Cenifcate No. CLA-2021.2320
Valid Uetil = Mar 19,2022
\ tence ene ena ar ili von rm ed dome /)
Scanned with CamScannera CHEC CORPORATION
CRANE ano HEAVY EQUIPMENT CERTIFICATION
Olympia, Makati 1207, Philippines tel: (+63 2) 99 0067 / 99 O4GS Fax: (463 2) 896 7283
sting Organization - DOLE-BWC Accreditation No. 1410-18022318-0015
CERTIFICATE
‘onstruction and Marine, Incorporated
12 Manggahan St., Begumbayan, Quezon City
Accredited
Issued To
‘Test Conducted + THOROUGH VISUAL EXAMINATION
AND MAGNETIC PARTICLE TESTING
Location + Fabrication Shop / Yard
Buy. Maguyam, Silang, Cavite
SHACKLE
Capacity :3.25 tons
Mfg. By | :CE/SC
Size; 5/8" diameter
Quantity = G) pes.
3.25 Ton
Test Method/Standard : 1802415
Forged Shackles for General Lifting Purposes
Test Result : SATISFACTORY
Remark / Note : None
| cerify that on January 20,2021, a thorough visual examination and magnetic particle testing for
the equipment described above was conducted. It was found tobe in satisfactory condition.
also certify that this isa true report ofthe result.
Inspected By:
t
conta LAs
Catt etn
Pe era eats aan Senet
nearest tna cnera taste rere ea
eae he cee
SSeS
te es eee ee ee
—
Scanned with CamScannerCH EC corPorATION
CRANE ano HEAVY EQUIPMENT CERTIFICATION
mpi, Makati 1207, Philippines tel: (63 2) 899 0067 / 499 0468 Fax: (+63 2) $96 7280
ting Organization - DOLE-BWC Accreditation No. 1410-18022318-0015
8263 Constan
Accredited T.
SS CERTIFICATE
Issued To BEI Construction and Marine, Incorporated
12 Manggahan St., Bagumbayan, Quezon City
Test Conducted : THOROUGH VISUAL EXAMINATION
AND MAGNETIC PARTICLE TESTING
Location : Fabrication Shop / Yard
Bay. Maguyam, Silang, Cavite
Item Description : SHACKLE
Capacity:
Mfg. By
Size 3/4" diameter
: Quantity —:(3) pes.
. Working Load Limit 1: 475 Ton
|
‘Test Method/Standard 1 1802415
| Forged Shackles for General Lifting Purposes
Test Result SATISFACTORY
i Remark / Note : None
| certify that on January 20, 2021, a thorough visual examination and magnetic particle testing for
the equipment described above was conducted, It was found to be in satisfactory condition.
also certify that this isa true report ofthe result.
| ape aed.
“uson oes Dhrenm
| Cena Nae
Caseat io. : cLA22110
ict Sarg 020
Feta asa ea asc ee cet
ep th tg rt errs era nett os
SS
seen en ers ra ieee
Scanned with CamScanner