Professional Documents
Culture Documents
Simple Steps For Using Struds
Simple Steps For Using Struds
Exclusive 30
- Select floor one by one and give floor height and level (footing top as zero
level), and save each floor data. - OK
Floor plan - Set – Select the floor to be drawn-OK
Floor screen-
- Create –slab-rectangular Day Trial
–slab-rectangular or as you like - first point of slab as 3 3( x and y
position)
Simple steps for using STRUDS
- Second point of slab means, co-ordinate of diagonal opposite point with Reference to first point of slab, i.e.
size of slab like 3 4.5 (you can also use comma (,) instead of space for example: 4,4 to give slab
dimensions) Access Now
- Give information about direction of loading, thickness, live load , floor
Load etc.
No thanks, I don't want my exclusive trial
- OK -draw further slabs as you like.
Save
- C:/ any folder/ File name
Create
- Column -Auto add and then type , Y for yes, N for no L for left etc
Create
- Wall - define wall one after other , after giving thickness and wall ht and
Name like 9w , 4w , para , etc
Create
- Duct – for open to sky to be drawn and give size of duct like 4 4
Property - Create - Section for beam sizes , name as 918 for 9”x18” beam
- Select section type- Rectangular or as you like- Give width in B and depth
in D –SAVE- repeat to create more section-close
Add to custom section –if you want to save the section sizes for new project
Load custom section- to get the section sizes from previous menu.
Property
- Attach - Section - select the section to be attach from down arrow and
Use locate to attach a single beam, Use grid to attach one continuous grid
and rest for remaining section not attached so far and all for all sec-close.
Property
- Attach -Wall –Select the wall one by one and attached them as above-close
Click the flag if beam depth to be deducted from floor height (consider
section size). Close.
Property
- Detach–Wall– If we want to remove wall then select locate and click on
Exclusive 30
BUILDING SCREEN
Day Trial
Floor plan - Copy –floor plan , here you copy all the floor plan
Property
-creat –load –slab to beam –remove the flag Access Now
so that all the load from slab to
Beam will be removed.-close
Floor plan -Close . This way you can make all the changes including terrace floor.
Floor - No thanks, I don't want my exclusive trial
Close
Building screen on display now
Column
- Set parameters-make changes as per your requirement-by default column Size at top floor is considard
230 x 300 and increment of 75 mm per floor Downword .close
Column
-Size report-close
Column
- Orientation –select column-click on column-shape and size-column sizes-
Change the size as per your requirment-save- To make the orientation
Horizontal-reverse the sizes of column –autosizing-save-close-save-close.
-orientation - Multiple selection of column – you can select as many as
column you want for orientation.
STEPS FOR EARTH QUAKE LOADS
Load cases - plan frame-click double all eqlx+,eqlx- for earth quake and all wlx+ etc
for wind load to considered.
Load cases
- Space frame –repeat the same
Set up
- Seismic Parameters for Earth quake ,use help if OK. save - close.
-Wind parameters for wind load. Save-close.
Load
- Generate Earth quake load- Frame stiffness method-
Load
- Earth quake load report to see the Earth quake loads.
Plane frame - Generate
Plane frame - View - Close
Plane frame - Analysis file –All -save
Space frame - Generate
Space frame - View -View space- Isometric –floor all
Building
-save - building- exit-yes
ANALYSIS
Analysis -Open- Building File -C: /Folder Name / File name
Exclusive 30
Column
Day Trial
– Space frame – properties-
Design - Save
View design – select the column –change the size of column if required.-save-redesign
Close
FOOTING-
Space frame –Properties – Select bar dia
- Select soil parameters-change S.B.C. if required.-OK( by default SBC IS
250
- Design - New-
- Report –schedule
- Close
BEAM
Detailing properties – Flag on for detailing as per IS 13920 and for concrete shear .
Unlock Access to An
Design new –Worst Load combination
Access Now
Design result –section graphics.
Drafting-file-open
Drafting - Give paper size- say 11 x 8 (relative units, no significance for actual scale)
Design drafting
Place the section , schedule etc at OK position. And save the sheet.
X dimn-
OK
Y dimn -
OK scale 1=1
Unlock Access to An
File – Autocad - open
Access Now
Menu ( Type menu)
Draw the single line diagram or centerline diagram in AutoCAD or open file.
Load ( Type L)
Transfer drawing on struds layer , place column - write to file-give file name and save
Open STRUDS from menu. Create new building – set floor – Create – Import
doc
Spam or junk
Hateful or offensive
If you are the copyright owner of this document and want
Unlock Access to report it, please followthese
to An
directions to submit a copyright infringement notice.
Report Cancel Exclusive 30
Bottom of Form
autocad
example tutorial
struds
autocad
example tutorial
struds
(fewer )
mkrkarthi
Ads by Google
Detailing Software
Antiseismic Technologies
Static Dynamic Analysis Software
www.pi.gr
PreviousNext
1.
Unlock Access to An
Exclusive 30
p. Day Trial
Simple steps for using STRUDS
Access Now
p.
p.
2.
p.
p.
Unlock Access to An
Exclusive 30
Day Trial
p.
Access Now
p.
5 p.
10 p.
10 p.
Recent Readcasters
Unlock Access to An
Exclusive 30
Day Trial
Simple steps for using STRUDS
Add a Comment
Top of Form
Access Now
55809c9e134cffa
Submit
share:
Characters: 400
document_comm
4gen
Bottom of Form