Professional Documents
Culture Documents
"'#%
-%#,#('+
D
D
D
D
D
D
D
#
## #
D
)
$
#
#
#
D
D
&
(
(
D
"
D
"
D
%
#
D '
#
%
D
!
#
D
#
!
AMX-4 FUNCTIONAL CHECK
GE MEDICAL SYSTEMS (MODEL 2115090 SERIES)
REV 0 DIRECTION 2115680-100
!
#
iv
REV 0 DIRECTION 2115680-100
If you have any comments, suggestions or corrections to the information in this document,
please write them down, include the document title and document number, and send them to:
ENGINEERING, X-RAY W-702
MANAGER - FIELD SERVICE DEVELOPMENT
P.O. BOX 414
MILWAUKEE, WI 53201-0414
All packages should be closely upon discovery, or in any event, 8*285-3449 &(("!&."'/ after
examined at time of delivery. If within days after receipt, and the damage is found. At this time be
damage is apparent, have notation contents and containers held for ready to supply name of carrier,
!($" &) -%&+(")." written on inspection by the carrier. A transĆ delivery date, consignee name,
'' copies of the freight or express portation company will not pay a freight or express bill number, item
bill "#*," delivery is accepted or claim for damage if an inspection is damaged and extent of damage.
signed for" by a General Electric not requested within this day
representative or a hospital receivĆ period. Complete instructions regarding
ing agent. Whether noted or claim procedure are found in
concealed, damage be Call Traffic and Transportation, Section S" of the Policy &
reported to the carrier &(("!&."'/ Milwaukee, WI (414) 827-3449Ă/ Procedure Bulletins.
6/17/94
v
vi
REVISION HISTORY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
1Ć1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
1Ć2 Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
1Ć3 Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
1Ć4 Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
SYMBOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1
vii
viii
Title Page 0
i thru x 0
ix
x
#
D The electrical wiring of the relevant rooms complies with all national and local
codes.
D The equipment is used in accordance with the instructions for use. Refer to DiĆ
rection 2115603-100, AMX-4 Operation (Model 2115090 Series), or Direction
2115602-100, AMX-4 International Operation (Model 2115090 Series) for
proper operating procedures.
" ! !
!
The General Electric Company, Medical Systems, and its associates, maintain a
worldwide organization of stations from which one may obtain skilled x-ray service.
Arrangements can usually be made to furnish preventive and/or emergency service on
a contract basis. A General Electric Medical Systems representative will be glad to disĆ
cuss this plan.
1-1
See Illustration 1-1. AMX-4 is identified by one of the following Model Numbers on
the rating plate located on the top cover: 2115090, 2115090-2, 2115090-4,
2115090-5, 2115090-6, 2115090-7, 2115090-8, 2115090-9, 2115090-10,
2115090-11.
Functional Check indicates that the AMX-4 is functioning correctly. It does not indiĆ
cate that the unit is performing to specifications. Refer to Direction 2115682-100,
for tests that verify specified
performance. Requirements for Functional Check are pass or fail. Service is required
if any Requirement is failed.
After each requirement is inspected, place a check in its box. Record notes and comĆ
ments next to the requirement.
ILLUSTRATION 1-1
1-2
AMX-4 FUNCTIONAL CHECK
GE MEDICAL SYSTEMS (MODEL 2115090 SERIES)
REV 0 DIRECTION 2115680-100
Requirements are pass or fail. Service is required if any Requirement is failed. After
each Requirement is verified, place a check in its box. Record notes and comments
next to the Requirement.
2-1
AMX-4 FUNCTIONAL CHECK
GE MEDICAL SYSTEMS (MODEL 2115090 SERIES)
REV 0 DIRECTION 2115680-100
2-2
AMX-4 FUNCTIONAL CHECK
GE MEDICAL SYSTEMS (MODEL 2115090 SERIES)
REV 0 DIRECTION 2115680-100
Requirements are pass or fail. Service is required if any Requirement is failed. After
each Requirement is verified, place a check in its box. Record notes and comments
next to the Requirement.
ON OFF
j Pressing kVp B decreases kVp display.
j Pressing mAs Y increases mAs display.
j Pressing mAs B decreases mAs display.
j Horizontal Tube Arm Latch operates
smoothly and holds arm securely.
j Vertical Tube Column rotates 360_ from
latch position to latch position.
j Tube Arm moves smoothly from bottom to
top of tube column.
j Tube Arm extends and retracts smoothly.
j Tube Unit rotates 90_ to horizontal in both
directions.
j Tube Unit rotates back 10_ and forward
110_.
j Latch holds column in drive position.
j Lock prevents vertical travel.
j Lock prevents tube extension.
j Lock prevents column rotation.
3-1
AMX-4 FUNCTIONAL CHECK
GE MEDICAL SYSTEMS (MODEL 2115090 SERIES)
REV 0 DIRECTION 2115680-100
j Rotational Detent Knob must be pulled out,
or unscrewed counter clockwise to rotate
collimator.
j Tightening Rotational Detent Knob
clockwise will secure collimator in any
position.
j Collimator rotates 90_ from center to either
side.
j Rotational Detent Knob engages at center
and at 90_ either side from center.
3-2
All symbols used on the equipment and in its accompanying documents are shown and
explained in this appendix.
Caution advises of an avoidable condition that could cause minor physical injury, or
damage to equipment or data.
Warning advises of an avoidable condition that may allow or cause a personal injury of
the catastrophic destruction of equipment or data.
Danger advises of an avoidable condition that will cause serious or fatal injury.
X-ray emission. X-ray tube head is emitting x-rays. Take adequate precautions to
prevent the possibility of any persons carelessly, unwisely, or unknowingly exposing
themselves or others to radiation.
A-1
Collimator blades closed. The controlled blades are shown in thicker lines.
Collimator Blades open. The controlled blades are shown in thicker lines.
Alternating Current. Indicates equipment that is suitable for alternating current only.
Direct Current. Indicates equipment that is suitable for direct current only.
A-2