Professional Documents
Culture Documents
Soundpeats Truefree User Manual 190603-3 1
Soundpeats Truefree User Manual 190603-3 1
Contents
TrueFree+
Deutsch -------------------------------------------------------------------------------------------------- 8 - 13
Español -------------------------------------------------------------------------------------------------- 14 - 19
Français --------------------------------------------------------------------------------------------------20 - 26
Italiano -------------------------------------------------------------------------------------------------- 27 - 33
日本語 -----------------------------------------------------------------------------------------------34 - 39
中 文---------------------------------------------------------------------------------------------- 40 - 44
MANUFACTURER
Shenzhen SoundSOUL Information Technology Company Limited
Room 1308-1309, Building B, Huihai Square, Chuangye Road,
Longhua District, Shenzhen, China. 518109
support@soundpeatsaudio.com
www.soundpeatsaudio.com
211-181022
USER MANUAL | Manuel d'Utilisation | Bedienungsanleitung |
FCC ID:2AFTUYL001
Made in China Manual de Instrucciones | Manuale di istruzioni | 取扱説明書 ¦ 中文
English
English
English
English
English
English
English
1. Please charge the earbuds at least once
Mono Mode every 3 months when not in use for a long Status Earbuds LED Indicator This equipment has been tested and found to comply with the limits for a Class B
Power On Take out the earbuds from charging case
Bluetooth Profile Bluetooth 5.0, AVRCP, HFP, HSP, A2DP time. Charging digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
1. The earbud enters pairing mode directly with a voice prompt “power on” after Press and hold the MFB for 1s until white LED flashes Red indicator stays on
Bluetooth Chipset Realtek 8763BFR 2. To ensure charging safety, please do not Fully charged White indicator turns on and goes off after 1 minute provide reasonable protection against harmful interference in a residential
1 2 3 being taken out from the charging case. White indicator flashes quickly for around Power Off Place back the earbuds into charging case
Maximum Working Range 33 feet / 10m (no obstacle) use any USB charging adapter with current Press and hold the MFB for 3s until red indicator long flashes Pairing mode Red and white indicators flash alternately installation. This equipment generates uses and can radiate radio frequency
10s, then red and white indicators flash alternately with a voice prompt “pairing”.
Play Time 3-4 hours (varies by volume and audio file) over 5V 1A. Please do not use quick charger once. In Stereo Mode, turn off either earbud will switch off Earbuds connect to each other White LED indicator flashes quickly energy and, if not installed and used in accordance with the instructions, may
“SOUNDPEATS TrueFree+ L” or “SOUNDPEATS TrueFree+ R” would show up on the cause harmful interference to radio communications. However, there is no
Charging Time 1.5 hour to charge the earbuds and charging case. both units
Bluetooth list, hit it to connect. Status Earbuds LED Indicator guarantee that interference will not occur in a particular installation. If this
Charging Case Recharge Earbuds 9-10 times (both earbuds) Play / Pause Press the MFB once
2. If you want to connect two earbuds separately with 2 devices nearby, please Play Next / Previous Double tap left MFB for previous track Fully charged Solid Green equipment does cause harmful interference to radio or television reception, which
Earbud Capacity 43mah
connect the left one to one device at first. In case it will connect to the right earbud Note: Double tap right MFB for next track Low Battery
can be determined by turning the equipment off and on, the user is encouraged to
4 5 Charging Case Capacity 800mAh Both indicators flash in green 5 times every 20s
automatically after being taken out from the charging case. 1. If you don’t know which device the earbud has already connected, please turn Answer Phone Call Press the MFB once try to correct the interference by one or more of the following measures:
Earbud Dimension (L * W * H) 0.96*0.86*0.64 inches / 24*21.9*16 mm -- Reorient or relocate the receiving antenna.
it off, then press and hold the button for 5 seconds until red and white indicator Hang Up Press the MFB once
Warranty
Product Diagram Earbud Weight 0.16oz / 4.7g -- Increase the separation between the equipment and receiver.
Stereo Mode flashes alternately to have the earbud enter pairing mode again. Reject Phone Call Press the MFB for 1.5s
Mute / Resume A Call Double tap the MFB during a call -- Connect the equipment into an outlet on a circuit different from that to which the
Take out both earbuds from the charging case. The two earbuds will flash in white 2. If pairing device is switched off or Bluetooth disconnected, the earbuds will stay in We warrant this device 12 MONTHS from date of the original purchase for manufacturer
Activate Voice Assistant Press the MFB for 1s in play / standby mode receiver is connected.
Wearing at first. Then the left indicator goes out, and right indicator flashes in red and white. pairing mode for 5 minutes and then power off automatically. defects. -- Consult the dealer or an experienced radio/TV technician for help.
Transfer Voice Between Press the MFB for 1s during a call
Activate the Bluetooth in your device and hit "SOUNDPEATS TrueFree+ R" on the 3. The earbuds can remember previously paired devices. They would automatically Earphones and Phone support@soundpeatsaudio.com
1. Identify the left and right earbuds. Bluetooth list. connect to the last device they have paired before after being taken out from Call Switching During a call, if there is another incoming call at the same This device complies with part 15 of the FCC Rules. Operation is subject to the
2. Insert the earbuds into your ears and www.soundpeatsaudio.com following two conditions:
the case. time Press the MFB to answer the second call and put the
adjust to find best angle with Please scan the QR code or search the link below for detailed PDF manual :
microphone downwards.
Factory Reset first on hold. (1) This device may not cause harmful interference, and (2) this device must
Long press 1s to reject the new incoming call. accept any interference received, including interference that may cause
3. Make sure the eartips seal the ear (Try the following steps if you fail building connection between two earbuds, or
1 2 3 4 5 8 8 6 7
canals. Double tap the MFB to switch between two phone calls. undesired operation.
between earbuds and device)
1. Clear the pairing record between the earbuds and all of your devices. Press once to hang up the current call.
1 Multifunction Button 5 Charging Case Changes or modifications not expressly approved by the party responsible for
2. Hold and press the MFB of both earbuds for 10 seconds when in charging https://soundpeatsaudio.com/downloads/
2 LED Indicator 6 Charging Slot compliance could void the user's authority to operate the equipment.
status, the LED indicator will flash red for 3 times if resetting successfully.
3 Microphone 7 USB Charging Port
4 Charging Contactor 8 Charging Case LED Indicator
1 2 3 4 5 6 7
Lieferumfang 2. Halten Sie die MFB-Taste an beiden Ohrhörern gedrückt und drücken Sie sie 10
Spezifikation Starten Tastenbedienung LED-Anzeige
Sekunden lang, während der Ladevorgang ausgeführt wird. Bei erfolgreichem
Reset blinkt die LED-Anzeige dreimal rot.
Technik BT5.0,AVRCP,HFP,HSP,A2DP Mono-Modus Einschalten automatisch Nehmen Sie die Kopfhörer aus dem Ladekoffer, das weiße Licht leuchtet.
Einschalten manuell Halten Sie die MFB-Taste 1 Sekunde lang gedrückt. Die Anzeige Status
Chipsatz Realtek 8763BFR Nehmen Sie einen der Kopfhörer aus der Ladebox, das Headset mit Hinweiston
Aufladen Anzeigeleuchte blinkt weiß Die LED-Anzeige leuchtet rot. Aufladen
Deutsch
Deutsch
Deutsch
Deutsch
Deutsch
Deutsch
1 2 3 “power on” begleitet, das weiße Licht blinkt etwa 10 Sekunden lang, dann blinkt die
Maximale Reichweite 10m Ausschalten automatisch Legen Sie die Kopfhörer in die Ladebo(Wenn die Ladebox leer ist, Weißes Licht leuchtet für 1m und schaltet sich aus. vollgeladen
1. Wenn Sie es lange Zeit nicht benutzen,
Gesprächszeit 3-4 Stunden Anzeige abwechselnd rot und weiß, mit dem Hinweiston “Pairing”, schalten Sie das wird sie nicht automatisch ausschalten) LED-Anzeige blinkt schnell weiß Linke und rechte Kopfhörer suchen
laden Sie bitte die Kopfhörer mindestens
(Abhängig von Lautstärke und Audio) Bluetooth-Gerät ein und suchen Sie nach SOUNDPEATS TrueFree+ L "oder" einmal alle 3 Monate auf;Verwenden Sie Ausschalten manuell Halten Sie die MFB-Taste 3 Sekunden lang gedrückt. Das rote Licht und verbinden sich miteinander
SOUNDPEATS TrueFree+ R ", klicken Sie, um die Verbindung herzustellen. leuchtet 2 Sekunden lang. LED-Anzeige blinkt abwechselnd rot und weiß In den Paarungsmodus
Ladezeit 1.5 Stunden kein Ladegerät mit mehr als 5 V 1A
(Schalten Sie im Stereomodus gleichzeitig einen Kopfhörer aus und Die LED-Anzeige leuchtet grün. Voll aufgeladen
Wiederaufladbarkeit von Ladestation 9-10 times (beide Kopfhörer) Hinweis: Wenn Sie zwei Kopfhörer an zwei Geräte anschließen möchten, die beiden (Schnellladung), um das Headset oder die
den anderen Kopfhörer gleichzeitig aus.) Die beide grüne Lichter blinken alle 20s fünfmal Niedrige Batterieaufforderung
Akkukapazität der Kopfhörer 43mAh Geräte jedoch in der Nähe sind, koppeln Sie bitte das linke Ohr und dann das rechte Ladebox aufzuladen. Spielen/Pause die Multifunktionstaste einmal drücken
4 5
Akkukapazität der Ladekoffer 800mAh Ohr. Nächste/Vorherige Nächstes Lied während der Wiedergabe den Knopf am rechten
Kopfhörer-Gewicht(allein) 4.7g Wenn das rechte Ohr zuerst mit einem Gerät verbunden wird, wird das linke Ohr Wiedergabe Hörer zweimal antippen und vorheriges Lied Knopf am linken Hörer Pflege und Wartung
Produkt Diagramm zweimal antippen.
entfernt und das linke Ohr direkt mit dem rechten Ohr verbunden.
Hinweis: Anruf annehmen/ beenden Drücken Sie kurz die MFB-Taste Wir bieten ab dem Kaufdatum eine 12-monatige Garantie, die auf Herstellungsfehler
Tragen der Kopfhörer Stereo-Modus 1. Wenn Sie nicht wissen, an welches Gerät die Kopfhörer angeschlossen ist, können Sie
Anruf ablehnen Drücken Sie die MFB-Taste 1,5 Sekunden lang
beschränkt ist.
Anruf stummschalten Doppelklicken Sie die Multifunktionstaste
Nehmen Sie den linken Ohrhörer und den rechten Ohrhörer gleichzeitig aus der die Kopfhörer zwingen, in den Pairing-Modus zu wechseln: Wenn die Kopfhörer support@soundpeatsaudio.com
Ausspracheassistanten Drücken Sie Multifunktionstaste für 1 Sekunde
Ladebox. Zu diesem Zeitpunkt blinken das linke und das rechte Ohr gleichzeitig weiß. ausgeschaltet ist, drücken Sie die MFB-Taste 5 Sekunden lang, um das neue Gerät
Sprachwechsel zwischen Drücken Sie die Multifunktionstaste 1 Sekunde lang. www.soundpeatsaudio.com
1. Identifizieren Sie den linken und rechten Wenn das weiße Licht des linken Ohrs aus ist und der rechte Ohrhörer abwechselnd wieder anzuschließen. Kopfhörer und Handy Bitte scannen Sie den QR-Code, um das ausführliche Handbuch zum PDF-Format anzuzeigen:
Ohrhörer. 2. Im Pairing-Modus ist innerhalb von 5 Minuten kein Gerät an die Kopfhörer angeschlos-
rot und weiß blinkt, schalten Sie das Bluetooth des Handys ein und suchen Sie nach Anrufwechsel Wenn während eines Anrufs gleichzeitig ein weiterer Anruf eingeht,
2. Setzen Sie die Ohrhörer in Ihre Ohren ein und sen, und die Kopfhörer wird automatisch ausgeschaltet.
stellen Sie den besten Winkel mit dem „SOUNDPEATS TrueFree+ R“. Klicken Sie hier, um die Verbindung herzustellen. drücken Sie die Multifunktionstaste, um den zweiten Anruf
1 2 3 4 5 8 8 6 7
Mikrofon nach unten ein. 3. Die Kopfhörer verfügen über eine Speicherfunktion und das Headset verbindet sich anzunehmen und den ersten auf Halten zu setzen.
3. Stellen Sie sicher, dass die Ohrstöpsel die Rücksetzen der Kopfhörer im Mono-Modus oder Stereo-Modus automatisch mit dem zuletzt verbundenen Drücken Sie die MFB-Taste 1 Sekunde lang, um den neuen Anruf
1 Multifunktionstaste 5 Ladekoffer
Gehörgänge abdichten. Gerät.
abzuweisen. https://soundpeatsaudio.com/downloads/
2 LED-Anzeige 6 Ladeschacht (Führen Sie die folgenden Schritte aus, wenn Sie keine Verbindung zwischen zwei Drücken Multifunktionstaste zweimal, um zwischen zwei Anrufen
3 Mikrofon 7 USB-Ladeport
Ohrhörern oder zwischen Ohrhörern und Gerät herstellen können.) umzuschalten.Drücken Sie einmal, um den aktuellen Anruf
1. Löschen Sie die Pairing-Aufzeichnung zwischen den Ohrhörern und allen Ihren weiterzuleiten.。
4 Ladeverbindungspunkt 8 LED-Anzeige der Ladebox
Geräten.
8 9 10 11 12 13
Español
Español
Español
Español
Español
Cargar los auriculares utilizando el estuche 9-10 veces (ambos auriculares) Ojo: Si desea emparejar los dos auriculares por separados con 2 dispositivos ningún adaptador USB de carga con corriente el indicador esté en rojo por 2 segundos y luego se apague (en Los indicadores LED verdes permanecen Carga completa
Capacidad de batería del auricular 43mAh cercanos, por favor, empareje primero el auricular izquierdo y luego, el derecho. De superior a 5V/1A. No utilice ningún tipo de el modo estéreo, si apaga un auricular, el otro se apagará también).
4 5 encendidos
lo contrario, el auricular izquierdo se emparejará automáticamente con el derecho. cargador rápido para cargar los auriculares y Reproducir/Pausar Haga clic en el botón MFB.
Capacidad de batería del estuche de carga 800mAh Dos luces verdes parpadean cinco Indicador de batería baja
la caja de carga. Canción anterior/posterior Haga doble clic en el botón MFB del auricular izquierdo/derecho.
Diagrama del Producto Peso (de un solo auricular) 4.7g veces cada 20 segundos
Responder/Colgar Haga clic en el botón MFB.
Modo estéreo llamadas
Saque al mismo tiempo los dos auriculares del estuche, y los dos indicadores Rechazar llamadas Mantenga presionado el botón MFB por 1.5 segundos. Garantía y Soporte
Sentirse Cómodo parpadearán en blanco. Cuando el indicador del auricular izquierdo se apaga y Silenciar llamadas Haga doble clic en el botón MFB.
Ofrecemos 12 MESES de garantía desde la fecha de compra por defectos del fabricante.
el del auricular derecho parpadea en rojo y blanco, "SOUNDPEATS TrueFree+ R" Notas: Activar asistente de voz Mantenga presionado el botón MFB por 1 segundos.
1.Identique el auricular derecho/izquierdo. Transferir entre el Mantenga presionado el botón MFB por 1 segundos. support@soundpeatsaudio.com
aparecerá en la lista de Bluetooth de su dispositivo, haga clic para establecer la 1. Cuando no sabe cuál dispositivo está conectado con los auriculares, puede
2.Gire los auriculares y ajustarlos en la posición dispositivo y los www.soundpeatsaudio.com
conexión. forzarlos a entrar en el modo de emparejamiento. Cuando los auriculares están
más cómoda. auriculares
apagados, mantenga presionado el botón MFB por 5 segundos, y así los Por favor, escanee el código QR para leer el manual de usuario detallado en formato PDF:
3. Asegúrese de colocar bien los auriculares con Transferir entre llamadas Durante una llamada, si hay una nueva llamada entrante, haga
auriculares volverán a conectarse con el nuevo dispositivo.
7
almohadillas en las orejas. El reseteo 2. Los auriculares permanecerán en modo de sincronización durante 5 minutos
clic en el botón MFB para responder la segunda y la primera se
1 2 3 4 5 8 8 6
Si los auriculares no se emparejan entre sí o no se puede conectar con el mantiene;
como máximo. Luego, se apagará automáticamente si no se encuentra un
dispositivo, por favor pruebe los siguientes pasos para un reseteo: Mantenga precionado el botón MFB para rechazar la nueva
1 Botón multifunción 5 Caja de carga dispositivo de emparejamiento.
1.Suprima los registros con los auriculares en el dispositivo llamada; https://soundpeatsaudio.com/downloads/
2 Indicador LED 6 Ranura de carga
3. Los auriculares tienen función de memoria y se re-emparejarán automáticamente
Haga doble clic en el botón MFB para transferir entre dos
al último dispositivo conectado.
3 Micrófono 7 Puerto de carga USB llamadas;
4 Contacto de carga 8 Indicador LED de la caja de carga Haga clic en el botón MFB para colgar la llamada actual.
14 15 16 17 18 19
Contenu de Boîte Spécifications Démarrer 2. Placez deux écouteurs dans la boîte de charge et assurez que les écouteurs Button Control Commutation Pendant un appel, si un autre appel est reçu en même temps, Garantie
sont en cours de charge ( les voyants rouges sont allumés ), appuyez simultané-
d'Appel appuyez sur bouton MFB
ment sur les boutons de fonction des deux oreillettes pendant 10 s jusqu'à ce
Technologie BT5.0, AVRCP, HFP, HSP, A2DP Mode Mono Allumer Retirez les écouteurs du boîtier de chargement et le voyant LED
pour répondre au deuxième appel et mettez le premier en La Garantie de cet appareil est de 12 MOIS à partir de la date de l'achat original
que les voyants rouges et blanc clignotent trois fois. La réinitialisation est
Retirez un écouteur de la boîte de charge, l’écouteur s’allume avec un message attente. pour les défauts du fabricant.
Puce Bluetooth Realtek 8763BFR terminée. Automatiquement blanc clignote.
1 2 3 Appuyez longuement sur bouton MFB pendant 1 s pour rejeter le
Plage de Travail Maximale 33 pieds (10 m) vocal <<power on>>. L'indicateur blanc clignote rapidement pendant environ 10 Allumer Manuellement Appuyez sur le boutton MFB et maintenez-le enfoncé pendant 1 support@soundpeatsaudio.com
Charger nouvel appel entrant.
Temps d'Utilisation 3-4 heures (Varie en fonction du secondes, puis les indicateurs rouge et blanc clignotent alternativement avec un seconde jusqu'à ce que le voyant LED blanc clignote.
Appuyez deux fois sur bouton MFB pour basculer entre deux www.soundpeatsaudio.com
message vocal <<Pairing>>. Activez la fonction Bluetooth sur votre appareil, Chargez les écouteurs au moins une fois tous Éteindre Mettez l'écouteur dans la boîte de charge (Si la batterie de
niveau de volume et de l’appareil) appels téléphoniques.
les 3 mois lorsque vous ne l'utilisez pas pendant Automatiquement boîtier de chargement est épuisée, l'oreillette ne s'éteindra pas Veuillez numériser le code QR pour afficher le manuel au format PDF détaillé:
Temps de Charge 1,5 heures «SOUNDPEATS TrueFree+ L» ou «SOUNDPEATS TrueFree+ R» devrait être listé dans le Appuyez une fois pour raccrocher l'appel en cours.
une longue période. Pour assurer la sécurité de automatiquement.)
Temps de Charge par Boîte de Charge 9-10 fois (les deux oreillettes) résultat de la recherche. Sélectionnez le nom à connecter.
Éteindre Appuyez sur le bouton multifonction et maintenez-le enfoncé
la charge, veuillez ne pas utiliser adaptateur de
4 5 Capacité de Batterie d’Oreillette 43 mAh PS : Si vous souhaitez connecter deux oreillettes à deux appareils différents, mais les Manuellement pendant 3 secondes jusqu'à ce que le voyant rouge clignote
charge USB avec un courant supérieur à 5V 1A
Capacité de Batterie de Boîte de Charge 800mAh deux appareils sont proches, veuillez d’abord connecter l'oreillette gauche puis une fois.
Diagramme de Produit et ne pas utiliser chargeur Quick Charge pour Indicateur LED https://soundpeatsaudio.com/downloads/
Français
Français
Français
Français
Français
Français
Français
Poids (Un Écouteur) 4,7 g En mode stéréo, éteignez l'un des deux écouteurs, l'autre
l'oreillette droite, sinon, l'oreillette gauche se connecte directement à l'oreillette charger les écouteurs et le boîtier de s'éteindra automatiquement
droite. chargement. Émission / Pause Appuyez brièvement sur Boutton MFB Indicateur LED des Écouteurs Status
Porter Des Oreillettes Mode Stéréo Jouer Précédent / Double-cliquez sur Boutton MFB de l’oreillette gauche / droite Indicateur LED est rouge solide Charge
Remarque: Suivant Indicateur LED devient blanc et s'éteint après Complètement chargé
Retirez les oreillettes gauche et droite du boîtier de charge en même temps, ils Répondre / Appuyez brièvement sur Boutton MFB
1. Identifiez l'écouteur droit / gauche. 1.Si vous ne savez pas à quel appareil le casque est connecté, vous pouvez le forcer à 1 minute
2. Faites tourner le casque et trouvez la position la clignotent simultanément en lumière blanche. Lorsque la lumière blanche de Raccrocher l'Appel Indicateur LED clignote en blanc rapidement Appariement des deux écouteurs
entrer en mode d’appariement : Éteignez l’oreillette, maintenez le bouton MFB
plus confortable. l'oreillette gauche est éteinte et que l'oreillette droite clignote en rouge et blanc, Rejeter l'Appel Appuyez sur Boutton MFB pendant 1,5 seconde Indicateur LED clignote alternativement en Mode d’appariement
3. Assurez-vous que l’embout d'écouteur est scellée enfoncé pendant 5 secondes jusqu'à ce que le voyant rouge et blanc clignote,
activez le Bluetooth de votre appareil pour connecter «SOUNDPEATS TrueFree+ R». Mettre en Sourdine Double-cliquez sur Boutton MFB rouge et blanc
1 2 3 4 5 8 8 6 7 contre le conduit auditif. l’oreillette passe en mode d’appariement et vous pouvez le connecter au nouvel Activer l'Assistant Vocal Appuyez sur Boutton MFB pendant 1 seconde Indicateur LED est vert solide Complètement chargé
Réinitialisation d'Usine appareil Bluetooth. Basculer Entre Oreillette Appuyez sur Boutton MFB pendant 1 seconde 2 indicateurs LED verts clignotent 5 fois toutes Batterie faible
1 Bouton Multifonction 5 Boîte de Charge
Lorsque les écouteurs ne peuvent pas entrer mode stéréo ou être connecté à 2.Les écouteurs resteront en mode d'appariement pendant 5 minutes au maximum. Ils et Téléphone les 20 secondes
2 Indicateur LED 6 Fente de Charge l'appareil, vous pouvez les réinitialiser comme suit : s'éteindront automatiquement si aucun périphérique d'appariement n'est trouvé.
3 Microphone 7 Port de Charge USB 1. Oubliez <<SOUNDPEATS TrueFree+ L >> et <<SOUNDPEATS TrueFree+ R>> sur la 3.Les oreillettes possèdent une fonction de mémoire et reconnectent automatique-
4 Contacteur de Charge 8 Indicateur LED de Boîte de Charge liste de vos appareils Bluetooth.
ment au dernier périphérique connecté en mode mono ou stéréo.
20 21 22 23 24 25 26
Italiano
Italiano
Italiano
Italiano
Italiano
Italiano
Modalità Stereo La luce bianca si spegne dopo 1 minuto L'auricolare è completamente carico
/Riattacare alla
La luce lampeggia in bianco Interconnessione di ricerca auricolare
Rimuovere contemporaneamente l'auricolare sinistro e l'auricolare destro dalla Telefonata
destro e sinistro
1. Identificare gli auricolari sinistro e destro. scatola di ricarica l’auricolare sinistro e destro lampeggiano contemporaneamente Nota: Rifiutare il telefono Premere a lungo il Tasto Multifunzionale per 1,5 secondi
2. Inserire gli auricolari nelle orecchie e La luce lampeggia alternativamente in Modalità di accoppiamento delle cuffie
1. Quando non si è a conoscenza del dispositivo al quale è collegato l'auricolare, è Chiamata muta Fare doppio clic sul pulsante multifunzionale
regolare per trovare l'angolo migliore con il bianchi. Quando la luce bianca dell'auricolare sinistro si spegne e l'auricolare destro rosso e bianco
possibile forzare l'auricolare ad accedere alla modalità di accoppiamento, ovvero, Assistente Vocale Premere a lungo il Tasto Multifunzionale per 1 secondo
1 2 3 4 5 8 8 6 7 microfono rivolto verso il basso. lampeggia con luce rossa e bianca, attivare la ricerca Bluetooth "SOUNDPEATS Gli indicatori LED verdi rimangono accesi Ricarica completata
quando l'auricolare è spento, tenere premuto il Tasto Multifunzionale per 5 secondi, Trasferire chiamate Premere a lungo il Tasto Multifunzionale per 1 secondo
3. Assicurarsi che i tappi auricolari sigillino i TrueFree+ R", fare clic per accoppiare collegamento. Due luci verdi lampeggiano 5 volte ogni 20 Batteria scarica
canali uditivi. quindi è possibile ricollegare il nuovo dispositivo. tra l'auricolare e il
1 Pulsante Multifunzionale 5 Slot di Ricarica secondi
2. Nella modalità di associazione, nessun dispositivo è connesso all'auricolare entro 5 telefono
2 Indicatore LED 6 Punto del Contattore di Carica minuti e l'auricolare si spegne automaticamente.
3 Microfono 7 Porta di Ricarica USB 3. L'auricolare ha una funzione di memoria e l'auricolare si collegherà automatica-
4 Contattore di Carica 8 Indicatore LED della scatola di ricarica mente all'ultimo dispositivo connesso in modalità di singolo o di stereo.
27 28 29 30 31 32 33
日本語
日本語
日本語
日本語
日本語
す。そして"Pairing"の提示音が聞こえます。 スマートフォンのBluetooth接続画面を立ち上 ンを10秒長押すと、左右イヤホンの指示ランプが赤色で3回点滅します。
それでリセットが完成します。 が自動電源オフできません。) 白色に点滅 左右イヤホンペアリング
再生時間 3-4 時間
げ、接続先リストより SOUNDPEATS TrueFree+ R もしくは SOUNDPEATS TrueFree+ L を 電源を切る イヤホンのボタンを3秒長押する。LEDランプが赤色に2秒点灯後消 赤色と白色で交互に点滅 イヤホンペアリングモードに入る
イヤホン充電時間 1.5時間
選択してください。 灯。
(左右どちら側の操作でも可能) 緑色に点灯 充電完了
充電ケース・イヤホン充電可能回数 9-10 回
注:左右両方のイヤホンを片耳ずつモノモードで使用する場合、先にL側のペアリング設 充電 再生/一時停止 イヤホンのボタンを1回押す。 2つも20秒ごとに緑色に5回点滅 低電量提示
イヤホンバッテリー電圧/容量 43mah
定を完了してからR側の設定を行ってください。 ご利用にならない時でもバッテリーの品質維持のため 曲送り/曲戻し イヤホンのボタン(L)を2回押す→曲戻し
ケースバッテリー容量 800mAh イヤホンのボタン(R)を2回押す→曲送り
4 5
に3か月に1回ほど充電してください。
充電時に5V/1Aを
質量 4.7g 電話を受ける/切る イヤホンのボタンを1回押す。
保証とサポート
ステレオモード 超える電流はご使用にならないでください。また急速
製品図解 電話を拒否する イヤホンのボタンを1.5秒長押す。
左右イヤホンを同時に充電ケースから取り出し、左右イヤホンのLEDインジケーターが同 充電気で充電することもお控えください。
ミュート/リプレイ イヤホンのボタンを2回押す。 本製品は、初期不良による故障に対してご購入日より12か月の製品保証を提供しております。
装着方法 時に白色で点滅します。左耳のLEDインジケーターが消灯して、右耳のLEDインジケーター
音声アシスタント イヤホンのボタンを1秒長押す。 support@soundpeatsaudio.com
が赤白交互に点滅する時、 スマートフォンのBluetooth接続画面を立ち上げ、接続先リスト
イヤホンとスマー イヤホンのボタンを1秒長押す。 www.soundpeatsaudio.com
1.左右イヤホンを確認後、イヤホンを耳に装着します。 より SOUNDPEATS TrueFree+ R を選択してください。
トフォンの 音 声 切
2.イヤホンが耳にしっかりと固定されるまでイヤホンを調整します。 さらに詳しい情報は下記のQRコードをスキャンしてPDFフォーマットの取扱い説明書へ:
注意事項: り替え
3.イヤホンがしっかり耳に装着していることを確認してください。
1.イヤホンがどのデバイスに接続されているかわからない場合は、イヤホンを強制的にペ 通話の切り替え 通話中同時に別の通話がある場合、
アリングモードにすることができます。 (イヤホンが電源オフの状態で、左右イヤホンの ボタンを1回押す、2番目の通話に応答する、最初の通話が一時停止
1 2 3 4 5 8 8 6 7 ボタンを同時に5秒長押します)。その時イヤホンを新しいデバイスに再接続できます。 されます。
2.Bluetooth接続が5分間行われない場合は自動で電源がOFFになります。 ボタンを1秒長押す、2番目の通話を拒否します。
https://soundpeatsaudio.com/downloads/
1 マルチファンクションボタン 5 充電ケース 3.本製品は接続履歴を元に自動で再接続する機能があります。モノモードまたはステレオ ボタンを2回押す、2つの通話を切り替えます。
2 LEDインジケーター 6 充電スロット モードでイヤホンが自動的に最後に接続していたBluetooth機器に再接続できます。
3 マイク 7 USB充電ポート
4 充電コンタクト 8 バッテリーインジケーター
34 35 36 37 38 39
中 文
中 文
中 文
中 文
自动开机 从充电盒取出耳机,指示灯白灯闪烁
充电盒电池容量 800mAh 立体声模式
4 5 手动开机 长按MFB键1秒,指示灯白灯闪烁
产品重量(单耳) 4.7g 从充电盒中同时取出左耳和右耳,这时左右耳同时闪烁白灯,当左耳的白灯熄灭,右耳闪烁
自动关机 把耳机放入充电盒内(若充电盒无电,则耳机无法自动关机)
红白灯时,打开手机蓝牙搜索“SOUNDPEATS TrueFree+ R”,点击进行配对连接。
产品示例图 手动关机 长按MFB键3秒,红色指示灯常亮2秒熄灭(立体声模式下,任意关 保修条例
闭一只耳机将同时关闭另只耳机)
佩戴 重置
暂停/播放 单击MFB键 从原购买者购买产品时我们开始对耳机进行保修,期限为12个月,保修范围仅限制造缺陷。
当耳机出现左右耳机不互配或者与设备无法配对时,按照以下操作进行重置。
上/下曲 双击左耳MFB键/双击右耳MFB键 support@soundpeatsaudio.com
1.从设备删除耳机的配对信息。
接听/挂断电话 短按MFB键
1. 识别左耳和右耳。 2.将耳机放回充电盒,确保耳机在充电状态,同时长按左右耳机的多功能触控键10秒,当左 www.soundpeatsaudio.com
拒绝电话 长按MFB键1.5秒
2. 旋转耳机并找到最舒适的位置。 右耳机的指示灯红灯闪烁3次,重置完毕。 请扫描二维码来浏览详细版PDF格式说明书:
通话静音 双击MFB键
3. 确保耳机套密封住耳道。
充电 语音助手 长按MFB键1秒
1 2 3 4 5 8 8 6 7 手机和耳机间切换 长按MFB键1秒
如果长时间不使用耳机,请保证至少每三个月
给耳机充一次电;为确保充电安全,请不要使 通话
1 多功能按钮 5 充电盒
用超过5V 1A(快充)的充电器给耳机或是充 来电通话切换 在通话过程中,如果同时有另一个来电,按MFB键接听第二个来 https://soundpeatsaudio.com/downloads/
2 LED指示灯 6 充电槽
电盒充电。 电,第一个来电保留;长按MFB键1秒拒绝新的来电;
3 麦克风 7 USB充电口
双按MFB键切换两个电话;单击MFB键挂掉当前通话。
4 充电触点 8 充电盒LED指示灯
40 41 42 28
43 44