Professional Documents
Culture Documents
low priority to a high priority cell. (i.e, a large ThreshXHigh value makes
reselection harder)-Usually Set to 10 Value of 10 indicates=10*2=20 dB
Set to 31*2=62 dB
Set to 12*2=24
Thres_Serving_Low: This parameter specifies the threshold (in dB) used by the
UE on the serving cell when reselecting a lower priority RAT/ frequency. : This
parameter specifies the threshold (in dB) for intra-frequency measurements.
Usually set to 10*2=20 db
for reselecting Lower Priority Frequency/RAT both ThresxLow and Thres_Serving_ Low
criteria should meet.
Thanks
Govind Dahiya