Professional Documents
Culture Documents
ASME B16.5 Flanges Robert-James Sales, Inc.: Class 300, Welding Neck, Slip-On and Threaded B16.47, Ser. A
ASME B16.5 Flanges Robert-James Sales, Inc.: Class 300, Welding Neck, Slip-On and Threaded B16.47, Ser. A
Robert-James
B16.47, Ser. A Sales, Inc.
ASME B16.5 Flanges
Weld Neck, Slip-On, Socket Weld, Threaded, Lap Joint, Blind.
1/2" - 24" Class 150, 300, 400, 600, 900, 1500 and 2500
NOTE: Reducing flanges are available in all types and pressures.
To order a reducing flange, state the smaller size first, then the
outside diameter of the larger size. Example: 1" X 71⁄2" O.D.
150 SO RF reducing would be a 3" X 1" Slip-on, Raised Faced
Reducing. Or, to simplify, just state the actual pipe sizes in order
of larger to smaller. Example: 3" X 1" Slip-on, Raised Faced,
Reducing.
3
Class 150
ASME B16.5
/2
1
3.50 0.44 1.38 0.12 0.88 0.90 1.88 0.62 0.62
/4
3
3.88 0.50 1.69 0.12 1.09 1.11 2.06 0.62 0.62
1 4.25 0.56 2.00 0.12 1.36 1.38 2.19 0.69 0.69
1 /4
1
4.62 0.62 2.50 0.19 1.70 1.72 2.25 0.81 0.81
1 /2
1
5.00 0.69 2.88 0.25 1.95 1.97 2.44 0.88 0.88
To be specified by purchaser.
4
Class 150
ASME B16.5
Min. Depth Dia. Bolt Dia. No. Welding Slip-on Lap Nominal
Thread of Hub at Hub Circle Holes Holes Neck Thrd. Joint Blind Size
Length Socket Bevel Dia. Sock. W.
T D A X
5
Class 300
ASME B16.5
/2
1
3.75 0.56 1.38 0.12 0.88 0.90 2.06 0.88 0.88
/4
3
4.62 0.62 1.69 0.12 1.09 1.11 2.25 1.00 1.00
1 4.88 0.69 2.00 0.12 1.36 1.38 2.44 1.06 1.06
1 /4
1
5.25 0.75 2.50 0.19 1.70 1.72 2.56 1.06 1.06
1 /2
1
6.12 0.81 2.88 0.25 1.95 1.97 2.69 1.19 1.19
To be specified by purchaser.
6
Class 300
ASME B16.5
Min. Dia. Depth Dia. Bolt Dia. No. Welding Slip-on Lap Nominal
Thread Counter of Hub at Hub Circle Holes Holes Neck Thrd. Joint Blind Size
Length Bore Thd. Socket Bevel Dia. Sock. W.
T Q D A X
7
Class 400
ASME B16.5
Thickness and length through hub do not include 1/4" raised face.
8
Class 400
ASME B16.5
/2
1
3.75 0.56 1.38 0.12 0.88 0.90 2.06 0.88 0.88
/4
3
4.62 0.62 1.69 0.12 1.09 1.11 2.25 1.00 1.00
1 4.88 0.69 2.00 0.12 1.36 1.38 2.44 1.06 1.06
1 /4
1
5.25 0.81 2.50 0.19 1.70 1.72 2.62 1.12 1.12
1 /2
1
6.12 0.88 2.88 0.25 1.95 1.97 2.75 1.25 1.25
To be specified by purchaser.
Min. Depth Dia. Bolt Dia. No. Welding Slip-on Lap Nominal
Thread of Hub at Hub Circle Holes Holes Neck Thrd. Joint Blind Size
Length Socket Bevel Dia. Sock. W.
T D A X
Thickness and length through hub do not include 1/4" raised face.
12
Class 900
ASME B16.5
1
/2 4.75 0.88 1.38 0.12 0.88 0.90 2.38 1.25 1.25
3
/4 5.12 1.00 1.69 0.12 1.09 1.11 2.75 1.38 1.38
1 5.88 1.12 2.00 0.12 1.36 1.38 2.88 1.62 1.62
1 1/4 6.25 1.12 2.50 0.19 1.70 1.72 2.88 1.62 1.62
To be specified by purchaser.
1 1/2 7.00 1.25 2.88 0.25 1.95 1.97 3.25 1.75 1.75
2 8.50 1.50 3.62 0.31 2.44 2.46 4.00 2.25 2.25
2 1/2 9.62 1.63 4.12 0.31 2.94 2.97 4.12 2.50 2.50
3 10.50 1.88 5.00 0.38 3.57 3.60 4.62 2.88 2.88
4 12.25 2.12 6.19 0.44 4.57 4.60 4.88 3.56 3.56
5 14.75 2.88 7.31 0.44 5.66 5.69 6.12 4.12 4.12
6 15.50 3.25 8.50 0.50 6.72 6.75 6.75 4.69 4.69
8 19.00 3.62 10.62 0.50 8.72 8.75 8.38 5.62 5.62
10 23.00 4.25 12.75 0.50 10.88 10.92 10.00 6.25 7.00
12 26.50 4.88 15.00 0.50 12.88 12.92 11.12 7.12 8.62
14 29.50 5.25 16.25 0.50 14.14 14.18 11.75 .— 9.50
16 32.50 5.75 18.50 0.50 16.16 16.19 12.25 .— 10.25
18 36.00 6.38 21.00 0.50 18.18 18.20 12.88 .— 10.88
20 38.75 7.00 23.00 0.50 20.20 20.25 14.00 .— 11.50
24 46.00 8.00 27.25 0.50 24.25 24.25 16.00 .— 13.00
Thickness and length through hub do not include 1/4" raised face.
14
Class 1500
ASME B16.5
Min. Depth Dia. Bolt Dia. No. Welding Slip-on Lap Nominal
Thread of Hub at Hub Circle Holes Holes Neck Thrd. Joint Blind Size
Length Socket Bevel Dia. Sock. W.
T D A X
1
/2 5.25 1.19 1.38 0.12 0.88 0.90 2.88 1.56 1.56
3
/4 5.50 1.25 1.69 0.12 1.09 1.11 3.12 1.69 1.69
To be specified by purchaser.