Professional Documents
Culture Documents
Cyl Liner 3408E
Cyl Liner 3408E
1 из 1
Cylinder Liner
SMCS Code: 1216
Illustration 69
(1) Bore
(2) Flange
Flange on cylinder liner Thickness . . . 8.890 ± 0.020 mm (0.3500 ± 0.0008 inch) Minimum
thickness . . . 8.870 mm (0.3492 inch)
1. Put liquid soap on the cylinder block liner bore surfaces and the rubber seals that are on the lower
end of the cylinder liner.
3. Immediately install the filler band in the groove that is under the cylinder liner flange.
4. Install the cylinder liner into the cylinder block before the expansion of the filler band.
Note: Refer to Guideline For Reusable Parts, SEBF8049, "Pistons" for more information. Also, refer
to Guideline For Reusable Parts, SEBF8068, "Cylinder Liners" for more information.
file://C:\SIS\TMP\sis781prt.html 15.02.2005