The document lists numerous revisions made to symbols and models in a circuit simulation software library. Revisions included updating existing models, adding new models and symbols, and fixing issues. The revisions were made to models for a variety of analog integrated circuits and were performed on multiple dates from August 2016 to August 2015.
The document lists numerous revisions made to symbols and models in a circuit simulation software library. Revisions included updating existing models, adding new models and symbols, and fixing issues. The revisions were made to models for a variety of analog integrated circuits and were performed on multiple dates from August 2016 to August 2015.
The document lists numerous revisions made to symbols and models in a circuit simulation software library. Revisions included updating existing models, adding new models and symbols, and fixing issues. The revisions were made to models for a variety of analog integrated circuits and were performed on multiple dates from August 2016 to August 2015.
LTC6995-1,and LTC6995-2. 08/24/16 Added some JFET models supplied by Linear Systems. 08/24/16 Revised the model of the LT1431. 08/24/16 Added symbols and models for the LTC4235-1, LTC4235-2, LTC4235-6, and LTC4236-2. 08/24/16 Added a symbol and model for the LTC4367 and LTC4367-1. 08/24/16 Revised the model of the LT1920. 08/24/16 Revised the model of the LT1167. 08/24/16 Added a symbol and model for the LTM4642. 08/24/16 Added a symbol and model for the LT3909. 08/24/16 Revised the model of the LT8304. 07/22/16 Revised the model of the LT4275A. 07/08/16 Added a symbol and model for the LT8335. 07/08/16 Revised the model of the LT6375. 06/30/16 Revised the models of the LTC4380-1, LTC4380-2, LTC4380-3, and LTC4380-4. 06/30/16 Revised the symbol of the LTC6269-10. 06/30/16 Revised the model of the LTC4417. 06/30/16 Revised the model of the LTC4444-5. 06/30/16 Revised the model of the LT6016. 06/30/16 Revised the models of the LT1395 and LT1398. 06/30/16 Revised the models of the LT4320 and LT4320-1. 06/30/16 Added symbols and models for the LTM8003 and LTM8003-3.3. 06/30/16 Added a symbol and model for the LT8304. 06/30/16 Added a symbol and model for the LTM8053. 06/30/16 Revised the model of the LT8640. 06/30/16 Revised the model of the LT8608. 06/30/16 Added a symbol and model for the LTC4090. 05/26/16 Revised the model of the LTC4281. 05/26/16 Revised the model of the LT8609A. 05/26/16 Revised the model of the LT8610. 05/19/16 Added symbols and models for the LTC4380-1, LTC4380-2, LTC4380-3, and LTC4380-4. 05/19/16 Revised the model of the LT1431. 05/19/16 Added a symbol and model for the LTC4242. 05/19/16 Revised the model of the LTC4359. 05/19/16 Revised the models of the LTC4225-1, LTC4225-2, LTC4227-1, LTC4227-2, LTC4227-3, LTC4227-4, LTC4228-1, LTC4228-2, and LTC4229. 05/19/16 Revised the model of the LT3091. 05/19/16 Added a symbol and model for the LT8609A. 05/19/16 Added a symbol and model for the LT3761A. 05/19/16 Revised the model of the LT3761. 05/02/16 Added a symbol and model for the LTC4257-1. 04/29/16 Added a symbol for the LTC2057HV. 04/29/16 Added a symbol and model for the LTM4650-1. 04/29/16 Added a symbol and model for the LT3668. 04/29/16 Revised the model of the LT3091. 04/29/16 Revised the models of the LTC4251, LTC4251-1, and LTC4251-2. 04/11/16 Revised the model of the LTC4364-2. 04/11/16 Revised the model of the LTC4281 and LTC4282. 04/11/16 Added a symbol and model for the LT3066. 04/11/16 Revised the model of the LTC4123. 03/31/16 Revised the models of the LTC1966, LTC1967, and LTC1968. 03/31/16 Added a symbol and model for the LT8608. 03/25/16 Fixed an error in the .meas statement parser. 03/25/16 Added a symbol and model for the LT8601. 03/25/16 Added a symbol and model for the LT3091. 03/25/16 Added symbols and models for the LT1389-1.25, LT1389-2.5, LT1389-4.096, and LT1389-5. 03/25/16 Added a symbol and model for the LTC2926. 03/04/16 Added a symbol and model for the LTM8064. 02/29/16 Added a symbol and model for the LTC6754. 02/29/16 Added a symbol and model for the LTC3859AL. 02/29/16 Revised the models of the LT4256-1, LT4256-2, and LT4256-3. 02/29/16 Revised the models of the LT1112 and LT1114. 02/29/16 Revised the model of the LT1012. 02/29/16 Added a symbol and model for the LT6657-2.5. 02/29/16 Added a symbols and models for the LT1461-2.5, LT1461-3, LT1461-3.3, LT1461-4.096, and LT1461-5. 02/29/16 Revised the models of the LTC6268 and LTC6268-10. 02/29/16 Added a symbol and model for the LTC4371. 02/29/16 Revised the model of the LT6016. 02/29/16 Revised the model of the LT1167. 02/29/16 Corrected a typo in the help file. 02/29/16 Revised the model of the LTC3810. 02/29/16 Revised the model of the LT8640. 02/29/16 Revised the symbol and model of the LT3508. 02/29/16 Revised the models of the LTC3552 and LTC3552-1. 02/29/16 Revised the symbol and model of the LTC3633. 02/29/16 Added a symbol and model for the LTC4123. 02/29/16 Revised the models of the LT3845 and LT3845A. 02/29/16 Added symbols and models for the LTM8067 and LTM8068. 02/29/16 Revised the model of the LTC3355. 02/29/16 Added a symbol and model for the LTC3265. 01/31/16 Added a symbol and model for the LT4276A. 01/31/16 Added symbols and models for the LTC4085-1, LTC4085-3, and LTC4085-4. 01/31/16 Revised the model of the LTC4085. 01/31/16 Revised the model of the LTC6990. 01/31/16 Revised the model of the LT4275A. 01/31/16 Revised the models of the LT1789-1 and LT1789-10. 01/31/16 Revised the model of the LT8410. 01/31/16 Revised the model of the LT3790. 01/31/16 Revised the model of the LT3652. 01/31/16 Revised the models of the LTM8054, LTM8055, and LTM8056. 01/31/16 Revised the models of the LT3757 and LT3757A. 01/31/15 Added a symbol and model for the LTC3649. 01/31/15 Added a symbol and model for the LTC7149. 01/31/15 Added a symbol and model for the LT8640-1. 01/31/15 Added a symbol and model for the LTM4632. 01/08/16 Fixed a subcircuit parsing issue. 01/08/16 Added a symbol and model for the LT4275A. 01/08/16 Revised the model of the LT8331. 12/23/15 Added a symbol and model for the LTC4281. 12/23/15 Revised the model of the LTC3871. 12/23/15 Revised the model of the LTC3331. 12/23/15 Revised the model of the LTC3618. 12/21/15 Revised SOAtherm-NMOS.lib 12/21/15 Added a symbol and model for the LT6375. 12/21/15 Revised the models of the LT4356-1 and LT4356-2. 12/21/15 Revised the model of the LT6016. 12/21/15 Revised the model of the LT3744. 12/21/15 Added a symbol and model for the LT8312. 12/21/15 Revised the model of the LT8331. 12/21/15 Revised the model of the LTC3810. 12/21/15 Added a symbol and model for the LTC3871. 12/21/15 Added a symbol and model for the LT3095. 11/23/15 Added a symbol and model for the LT8714. 11/23/15 Added symbols and models for the LT3048, LT3048-3.3, LT3048-5, and LT3048- 12. 11/23/15 Revised the model of the LTC4359. 11/17/15 Revised the model of the LT3744. 11/17/15 Revised the model of the LT8705. 11/16/15 Revised the model of the LTC3839. 11/16/15 Revised the model of the LT8331. 11/16/15 Revised the models of the LTC3612 and LTC3616. 11/16/15 Revised the model of the LT3748. 11/16/15 Added a symbol and model for the LTC4274. 11/16/15 Revised the model of the LTM9100. 11/16/15 Added a symbol and model for the LTC4085. 10/27/15 Added symbols and models for the LTC2641-16, LTC2641-14, LTC2641A-16, LTC2641-12, LTC2642-16, and LTC2642-14. 10/27/15 Added a symbol and model for the LT8331. 10/27/15 Revised the model of the LTC3878. 10/27/15 Revised the model of the LTC2934-2. 10/21/15 Added a symbol and model for the LTC4240. 10/21/15 Revised the models of the LTC1644 and LTC1646. 10/21/15 Revised the models of the LTC1643AH, LTC1643AL and LTC1643AL-1. 10/21/15 Revised the models of the LTC2950-1 and LTC2950-2. 10/21/15 Added a symbol and model for the LT8641. 10/21/15 Revised the model of the LTM4611. 10/21/15 Revised the models of the LT3971 and LT3991. 10/21/15 Revised the model of the LTM8033. 10/21/15 Added a symbol and model for the LTM4677. 10/02/15 Revised the model of the LT3840. 10/02/15 Added a symbol and model for the LTC4282. 10/02/15 Added symbols and models for the LTC1644 and LTC1645. 10/02/15 Revised the model of the LTC1646. 10/02/15 Added a symbol and model for the LTM8054. 10/02/15 Revised the model of the LT3973. 09/30/15 Revised the model of the LT1793. 09/30/15 Added a symbol and model for the LTM4650. 09/30/15 Revised the models of the LTM4623, LTM4624, LTM4625, and LTM4644. 09/30/15 Revised the model of the LT8631. 09/30/15 Revised the model of the LTC3605. 09/25/15 Revised the model of the LTC6362. 09/25/15 Added a symbol and model for the LTC6363. 09/25/15 Revised the model of the LTC6406. 09/25/15 Added a symbol and model for the LT8631. 09/25/15 Revised the model of the LTC3350. 09/25/15 Added a symbol and model for the LTC3121. 09/25/15 Revised the symbol and model of the LTC3765. 09/25/15 Added a symbol and model for the LTC1646. 09/18/15 Trapped a stack corruption issue. 09/18/15 Revised the models of the LT6230, LT6230-10, and LT6231. 09/18/15 Revised the models of the LTC2956-1 and LTC2956-2. 09/18/15 Added a symbol and model for the LTC3899. 09/18/15 Revised the models of the LT3652, LT3650-4.1, LT3650-4.2, LT3650-8.2, and LT3650-8.4. 09/14/15 Added symbols and models for the LTC1643AH, LTC1643AL and LTC1643AL-1. 09/14/15 Revised the models of the LTC2955-1 and LTC2955-2. 09/14/15 Added a symbol and model for the LT8330. 09/14/15 Included the contribution from gate current shot noise to the total JFET noise. 08/28/15 Revised the models of the LTC4257 and LTC4257-1. 08/28/15 Revised the models of the LTC2919-25, LTC2919-33, and LTC2919-50. 08/28/15 Revised the models of the LTC2909-25, LTC2909-33, and LTC2909-50. 08/28/15 Revised the models of the LTM8055 and LTM8056. 08/28/15 Revised the models of the LT3790, LT3791, and LT3791-1. 08/28/15 Added a symbol and model for the LTM4630A. 08/28/15 Revised the model of the LT1431. 08/28/15 Revised the models of the LTC6268 and LTC6268-10. 08/12/15 Revised the model of the LT3690. 08/12/15 Revised the models of the LTC3605, LTM4623, LTM4624, LTM4625, LTM4644, and LTC3897. 08/12/15 Revised the models of the LT1634-1.25, LT1634-2.5, LT1634-4.096, and LT1634-5. 08/12/15 Added symbols and models for the LTC1647-1, LTC1647-2, and LTC1647-3. 08/07/15 Added a symbol and model for the LTC4233. 08/07/15 Revised the models of the LTC4364-1 and LTC4364-2. 08/07/15 Revised the model of the LT1011. 08/07/15 Revised the model of the LTC3355. 08/07/15 Revised the model of the LT8616. 08/07/15 Added a symbol and model for the LTC3897. 08/07/15 Revised the model of the LT8602. 08/07/15 Revised the models of the LT3651-4.1, LT3651-4.2, LT3651-8.2, and LT3651- 8.4. 08/07/15 Added a symbol and model for the LT3744. 08/07/15 Revised the model of the LT3465. 08/07/15 Revised the models of the LTC2941, LTC2941-1, LTC2942, and LTC2942-1 08/07/15 Revised the model of the LTC2943. 07/28/15 Revised the model of the LT8471. 07/28/15 Revised the model of the LT3758 and LT3758A. 07/28/15 Revised the model of the LT8610. 07/28/15 Revised the model of the LT8609. 07/28/15 Added a symbol and model for the LTC2943. 07/28/15 Revised the model of the LTC2941 and LTC2941-1. 07/28/15 Added a symbol and model for the LTC2942 and LTC2942-1. 07/20/15 Corrected an error processing .measure statements. 07/17/15 Revised the model of the LT8705. 07/17/15 Added a symbol and model for the LTC3350. 07/17/15 Added a symbol and model for the LT3088. 07/17/15 Revised the model of the LTC3882. 07/17/15 Revised the model of the LTC3331. 07/17/15 Revised the model of the LTC3355. 07/17/15 Revised the model of the LTC4020. 07/17/15 Revised the model of the LTC3722-1 and LTC3722-2. 07/17/15 Added symbols and models for the LTC2941 and LTC2941-1. 07/17/15 Revised the model of the LTC4065. 07/17/15 Revised the models of the LTC6090 and LTC6090-5. 07/17/15 Added symbols and models for the LTC2956-1 and LTC2956-2. 07/17/15 Revised the model of the LTC6102. 07/17/15 Revised the model of the LTC4216. 07/17/15 Added symbols and models for the LTC2922, LTC2922-2.5, and LTC2922-3.3. 07/17/15 Revised the model of the LTC2945. 07/17/15 Added a symbol and model for the LTC2946. 07/17/15 Improved the performance of copying between schematics. 07/17/15 Increased the maximum number of objects that can be copied in one command. 07/17/15 Improved the validity of entered instance names. 06/29/15 Added symbols and models for the LTC2921, LTC2921-2.5, and LTC2921-3.3. 06/29/15 Revised the model of the LTC4417. 06/29/15 Added a symbol and model for the LTC7860. 06/29/15 Added a symbol and model for the LTM4622. 06/29/15 Revised the model of the LT8616. 06/29/15 Added symbols and models for the LT3061 and LT3062. 06/29/15 Revised the model of the LT3042. 06/29/15 Revised the model of the LTC1799. 06/12/15 Added a symbol and model for the LT3042. 06/12/15 Revised the model of the LTC3634. 06/11/15 Revised the model of the LTC3331. 06/11/15 The file clean up during a schematic Save As operation now more closely follows user preferences set in the Operation pane of the control panel. 06/11/15 Revised the model of the LT3760. 06/11/15 Revised the model of the LT1711. 06/09/15 Added a symbol and model for the LT8616. 06/09/15 Revised the model of the LT8697. 06/09/15 Revised the model of the LT8610. 06/09/15 Revised the models of the LTM8046, LTM8047, LTM8048, LTM8057, and LTM8058 06/09/15 Revised the models of the LT8570 and LT8570-1. 06/09/15 Added symbols and models for the LTC4267-1 and LTC4267-3. 06/09/15 Revised the symbol of the LTC4065. 06/04/15 Added a symbol and model for the LT8709. 06/03/15 Added a symbol and model for the LTC7138. 06/03/15 Revised the models of the LTM8046, LTM8047, and LTM8048. 06/03/15 Revised the models of the LTM8057 and LTM8058. 06/03/15 Revised the models of the LT8570 and LT8570-1. 05/31/15 Added a symbol and model for the LTC3331. 05/31/15 Revised the model of the LT8620. 05/31/15 Revised the model of the LTC3605. 05/31/15 Revised the model of the LTM4644. 05/31/15 Added a symbol and model for the LTC4257. 05/31/15 Added a symbol and model for the LTC4267. 05/31/15 Revised the model of the LTC4265. 05/22/15 Revised the model of the LT3667. 05/22/15 Revised the models of the LTC3025, LTC3025-1, LTC3025-2, LTC3025-3, and LTC3025-4. 05/21/15 Added a symbol and model for the LTC3887. 05/21/15 Revised the model of the LTC3862-1. 05/20/15 Added a symbol and model for the LTC3892-1. 05/20/15 Revised the models of the LT3796 and LT3796-1. 05/20/15 Revised the model of the LT8613. 05/20/15 Revised the model of the LT8609. 05/20/15 Added symbols and models for the LT8570 and LT8570-1. 05/20/15 Revised the model of the LT8580. 05/20/15 Revised the jig circuit supplied for the LTM4676. 05/20/15 Added symbols and models for the LTM4675 and LTM4676A. 05/20/15 Revised the model of the LTC3124. 05/20/15 Added a symbol and model for the LTC2945. 05/20/15 Revised the models of the LTC4231-1 and LTC4231-2. 05/20/15 Revised the model of the LTC4216. 05/20/15 Revised the model of the LT8705. 05/01/15 Added a symbol and model for the LTC3128. 05/01/15 Revised the model of the LTC2054. 05/01/15 Revised the model of the LTC4221. 05/01/15 Added symbols and models for the LTC4224-1 and LTC4224-2. 04/30/15 Revised the models of the LT3758 and LT3758A. 04/30/15 Revised the model of the LTC3625. 04/30/15 Revised the model of the LT3970. 04/27/15 Revised the model of the LTC2924. 04/27/15 Added symbols and models for the LT1004-1.2 and LT1004-2.5. 04/27/15 Added symbols and models for the LTC6905-80, LTC6905-96, LTC6905-100, and LTC6905-133. 04/27/15 Added a symbol and model for the LTC4065. 04/27/15 Revised the model of the LTC4150. 04/27/15 Revised the model of the LT3790. 04/27/15 Revised the model of the LTC3637. 04/27/15 Revised the model of the LTC3775. 04/08/15 Revised the symbol and model of the LTC3882. 04/08/15 Added a symbol and model for the LTC4234. 04/07/15 Added a symbol and model for the LTC4150. 04/07/15 Revised the symbol and model of the LTC4232. 04/07/15 Added a symbol and model for the LTC4232-1. 04/07/15 Added a symbol and model for the LTC3300-1. 04/07/15 Revised the model of the LTC3374. 04/07/15 Revised the model of the LT8602. 04/07/15 Revised the model of the LTC3882. 04/07/15 Revised the model of the LT3790. 03/31/15 Added a symbol and model for the LTC3882. 03/31/15 Revised the model of the LT8310. 03/31/15 Revised the model of the LT3952. 03/31/15 Revised the model of the LT4256-3. 03/24/15 Added a symbol and model for the LTC6090-5. 03/24/15 Revised the model of the LTC6090. 03/24/15 Revised the model of the LTC4261. 03/24/15 Revised the models of the LTC6655-1.25, LTC6655-2.048, LTC6655-2.5, LTC6655-3.3, LTC6655-3, LTC6655-4.096, and LTC6655-5. 03/24/15 Added a symbol and model for the LTM9100. 03/23/15 Revised the model of the LT8705. 03/23/15 Added a symbol and model for the LT8494. 03/23/15 Revised the model of the LT3840. 03/23/15 Revised the model of the LTC3786. 03/23/15 Revised the symbol and model of the LT3952. 03/23/15 Revised the model of the LT3999. 03/23/15 Revised the example LTC3873-5 circuit. 03/23/15 Revised the model of the LT8602. 03/23/15 Revised the symbols of the LTC3883 and LTC3883-1. 03/05/15 Revised the model of the LT4220. 03/05/15 Added a symbol and model for the LT1153. 03/05/15 Revised the symbol and model of the LTM4623. 03/05/15 Revised the models of the LT8610, LT8611, LT8612, LT8613, LT8614, and LT8620. 03/05/15 Revised the models of the LT8610A, LT8610AB, LT8610AC, and LT8640. 03/05/15 Revised the model of the LTM4649. 03/05/15 Revised the model of the LTC3864. 02/26/15 Revised the model of the LT1884. 02/26/15 Revised the models of the LT3650-4.1, LT3650-4.2, LT3650-8.2, and LT3650- 8.4. 02/26/15 Revised the model of the LTC3721-1. 02/26/15 Revised the models of the LT8610, LT8611, LT8612, LT8613, LT8614, and LT8620. 02/26/15 Revised the model of the LTC3723-1. 02/26/15 Revised the model of the LTC3866. 02/26/15 Revised the model of the LTC3615. 02/17/15 Added a symbol and model for the LT3952. 02/17/15 Revised the model of the LT3797. 02/11/15 Revised the model of the LTC3862-1. 02/11/15 Revised the model of the LT8602. 02/11/15 Revised the symbols for the LTM8055 and LTM8056. 02/10/15 Revised the model of the LT3845A. 02/10/15 Revised the model of the LT8602. 02/09/15 Added a symbol and model for the LTC1232. 02/09/15 Revised the models of the LTC3883 and LTC3883-1. 02/09/15 Revised the model of the LT6220. 02/09/15 Revised the symbols of the LTM8055 and LTM8056. 02/09/15 Revised the model of the LT8602. 02/09/15 Revised the model of the LT3652. 01/26/15 Added a symbol and model for the LTM4625. 02/09/15 Revised the model of the LT8609. 02/09/15 Revised the model of the LT3797. 02/09/15 Revised the model of the LT3757. 01/30/15 Improved the report of CPU usage to the OS while the simulation is paused. 01/30/15 Adjusted the multithreading algorithms to perform optimized on a i7-5960X. 01/30/15 When hierarchically resolving symbol paths, LTspice will now ignore files named as symbols but really aren't. 01/30/15 Revised the model of the LTM4634. 01/30/15 Revised the model of the LTC1235. 01/30/15 Revised the model of the LTC2865. 01/27/15 Revised the models of the LTC3883 and LTC3883-1. 01/26/15 Revised the models of the LTC4365 and LTC4365-1. 01/26/15 Added a symbol and model for the LTC2875. 01/26/15 Added a symbol and model for the LTM4641. 01/26/15 Added a symbol and model for the LT8610AC. 01/26/15 Added a symbol and model for the LT8613. 01/26/15 Added a symbol and model for the LTM8057. 01/26/15 Revised the model of the LTM4641. 01/26/15 Added a symbol and model for the LT8602. 01/26/15 Added a symbol and model for the LT8609. 01/26/15 Added a symbol and model for the LT8495. 01/26/15 Added a symbol and model for the LTC3892. 01/20/15 Revised the model of the LTC3411. 01/20/15 Revised the models of the LTC4440-5, LTC4444, LTC4444-5, and LTC4446. 01/20/15 Revised the model of the LT3355. 01/20/15 Revised the symbol LT3759. 01/16/15 Revised the symbol and model of the LT8310. 01/13/15 Revised the symbol and model of the LT8640. 01/12/15 Revised the model of the LT3667. 01/12/15 Improved environmental variable substitution. 01/12/15 Revised the models of the LTC4252A-1 and LTC4252A-2. 01/12/15 Added symbols and models for the LTC4214-1 and LTC4214-2. 01/12/15 Revised the models of the LTC4364-1 and LTC4364-2. 01/09/15 Revised the model of the LTC3453. 01/09/15 Revised the model of the LTC3528-2. 01/09/15 Revised the model of the LTC3600. 01/09/15 Added a symbol and model for the LTM4623. 01/09/15 Added a symbol and model for the LT8580. 12/16/14 Added a symbol and model for the LT3697. 12/30/14 Revised the model of the LTC3530. 12/29/14 Revised the model of the LT8697. 12/16/14 Revised the subthreshold conduction equations for VDMOS. 12/16/14 Revised the model of the LTC3774. 12/16/14 Revised the models of the LTC690, LTC691, LTC692, LTC693, LTC694, LTC694- 3.3, LTC695, LTC695-3.3, LTC699, and LTC1235. 12/16/14 Added a symbol and model for the LT4351. 12/16/14 Revised the model of the LTC2057. 12/16/14 Revised the models of the LTC4070 and LTC4071. 12/16/14 Revised the jigs circuits for the LTC1966, LTC1967, and LTC1968. 12/16/14 Added symbols and models for the LTC6268-10 and LTC6269-10. 12/15/14 Added a symbol and model for the LT3086. 12/15/14 Added a symbol and model for the LTC3355. 12/15/14 Revised the model of the LTC3622. 12/15/14 Revised the model of the LTC3600. 12/15/14 Revised the model of the LTC3415. 12/15/14 Added a symbol and model for the LT8640. 12/15/14 Revised the models of the LT8610AB and LT8611. 12/15/14 Revised the model of the LTC3891. 12/15/14 Revised the models of the LTC3860, LTC3861, and LTC3861-1. 12/15/14 Revised the model of the LT8620. 12/12/14 Revised the model of the LT1568. 11/24/14 More significant figures can now be displayed if desired. 11/19/14 Added a Linkwitz transform calculator implemented in .param statements as an examples/Educational circuit. 11/19/14 Added .plt files for many of the examples/Educational circuits. 11/19/14 Revised the model of the LTC3618. 11/17/14 Added a symbol and model for the LTC3637. 11/17/14 Revised the models of the LTC6993-2 and LTC6993-4. 11/17/14 Modified the behavior of MOS1,2,3 Cbs and Cbd when overspecified. 11/17/14 Modified the behavior of MOS1,2,3 terminal resistances when overspecified. 11/17/14 Modified the behavior of quasi sat over temp for quasimod=1. 11/14/14 Added a symbol and model for the LTC3124. 11/13/14 Removed some memory leaks in the URC implementation. 11/13/14 Improved the ability to cross probe URC terminal currents. 11/13/14 Added a symbol and model for the LTC1235. 11/13/14 Revised the model of the LT8710. 11/11/14 Added a symbol and model for the LTC692. 11/11/14 Added a symbol and model for the LTC693. 11/11/14 Revised the models of the LTC691, and LTC695, LTC695-3.3. 11/11/14 Improved vertical autoranging parametric plots. 11/10/14 Revised the models of the LTC4231-1 and LTC4231-2. 11/10/14 Added symbols and models for the LTM8055 and LTM8056. 11/10/14 Revised the model of the LTM8046. 11/10/14 Revised the model of the LT3505. 11/10/14 Added symbols and models for the LTC6752, LTC6752-2, and LTC6752-3. 11/10/14 Added a symbol and model for the LTC4079. 11/10/14 Revised the model of the LTC2927. 10/20/14 Added symbols and models for the LTC6268 and LTC6269. 10/16/14 Revised the model of the LT4256-3. 10/16/14 Added symbols and models for the LTC690, LTC691, LTC694, LTC694-3.3, LTC695, and LTC695-3.3. 10/16/14 Added a symbol and model for the LTC4054-4.2 and LTC4054X-4.2. 10/16/14 Added symbols and models for the LT1580, LT1580-2.5, LT1581, and LT1581- 2.5. 10/15/14 Revised the model of the LTC6081. 10/15/14 Revised the model of the LTC4355. 10/15/14 Added symbols and models for the LTC1477 and LTC1478. 10/15/14 Revised the model of the LT6003. 10/14/14 Revised the model of the LT3797. 10/14/14 Revised the model of the LT3795. 10/14/14 Revised the models of the LT3650-4.1, LT3650-4.2, LT3650-8.2, and LT3650- 8.4. 10/14/14 Revised the model of the LTC3114-1. 10/14/14 Revised the models of the LT8610, LT8610A, LT8610AB, LT8611, LT8612, LT8620, and LT8697. 10/14/14 Corrected some typo's in the help file. 09/25/14 Revised the model of the LTC6244. 09/24/14 Improved an error message for off-ground .ic directives. 09/24/14 Revised the model of the LT3798. 09/24/14 Worked around a bug in some graphic card drivers running multiple monitors. 09/23/14 Added a symbol and model for the LTC4350. 09/23/14 Revised the models of the LT3511 and LT3512. 09/22/14 Revised the model of the LT3763. 09/22/14 Revised the models of the LTC3114-1 and LTC3533. 09/22/14 Added a symbol and model for the LT8584. 09/19/14 Added symbols and models for the LT1575, LT1575-1.5, LT1575-2.8, LT1575- 3.3, LT1575-3.5, and LT1575-5. 09/19/14 Added symbols and models for the LTC1844-1.5 LTC1844-1.8, LTC1844-2.5, LTC1844-2.8, LTC1844-3.3 and LTC1844-SD. 09/19/14 Trapped a crash mode in the netlist viewer regarding very long lines. 09/18/14 Added symbols for the LT6015 and LT6017. 09/18/14 Added a symbol and model for the LT317A. 09/18/14 Corrected an error in the automatic symbol generator. 09/01/14 Added a symbol and model for the LT3752-1. 09/01/14 Revised the model of the LT3752 and LT3753. 08/28/14 Revised the model of the LT1166. 08/27/14 Revised the model of the LT3752. 08/26/14 Revised the model of the LTC2057. 08/24/14 Corrected an error in the Yang Chatterjee MOSFET charge model. 08/21/14 Revised the model of the LT1468. 08/21/14 Added symbols for the OP07, OP27, OP37, LM108A, and LM308. 08/20/14 Revised the model of the LTC3769. 08/20/14 Revised the model of the LTC1625. 08/20/14 Revised the models of the LT3754 and LT3760. 08/20/14 Added symbols for the LT6300 and LT6301. 08/20/14 Added a symbol and model for the LTC1733. 08/20/14 Revised the model of the LT3845. 08/20/14 Added a symbol and model for the LTC4053-4.2. 08/19/14 Added symbols and models for the LT6020 and LT6020-1. 08/18/14 Revised the model of the LT8614. 08/08/14 Updated the W�rth inductor database. 08/07/14 Added symbols and models for the LTC4231-1 and LTC4231-2. 08/07/14 Clarified an error message. 08/05/14 Revised the model of the LTC3608. 08/05/14 Revised the model of the LTC4216. 08/05/14 Revised the model of the LT3840. 08/05/14 Revised the model of the LT1783. 08/05/14 Fixed an issue where a command-line-specified .ini file could be mistaken for a netlist. 08/04/14 Added a symbol and model for the LTC3807. 08/01/14 Added a symbol and model for the LTM4639. 07/31/14 Added a symbol and model for the LTM4634. 07/29/14 Revised the models of the LTM4612 and LTM4613. 07/29/14 Revised the models of the LTC3621, LTC3621-2, LTC3622, LTC3622-2, LTC3624, and LTC3624-2. 07/29/14 Revised the model of the LT1360. 07/25/14 Revised the model of the LT6230. 07/25/14 Added a symbol and model for the LTC1040. 07/25/14 Added a symbol and model for the LTC3774. 07/25/14 Revised the model of the LTC3866. 07/25/14 Added symbols and models for the LTC4251, LTC4251-1 and LTC4251-2. 07/25/14 Added a symbol and model for the LTC2995. 07/25/14 Revised the models of the LT8610A and LT8610AB. 07/25/14 Added symbols and models for the LTC3622 and LTC3622-2. 07/25/14 Revised the models of the LT3692, LT3692A, and LT3992. 07/25/14 Added a symbol and model for the LTC3111. 07/25/14 Revised the model of the LTC3624. 07/25/14 Revised the model of the LTC3621. 07/25/14 Revised the model of the LTC3612. 07/25/14 Revised the model of the LTC3624-2. 07/25/14 Revised the model of the LTC3621-2. 07/25/14 Revised the model of the LT8310. 07/25/14 Added a symbol and model for the LTC3114-1. 07/25/14 Added a symbol and model for the LTC3638. 07/02/14 Added a symbol and model for the LT4256-3. 07/01/14 Revised the model of the LTC2950-1. 07/01/14 Improved the waveform zoom operation when some plotting panes were empty. 07/01/14 Added some support for thermal SOA simulation for the power transistors in hotswap products. 07/01/14 Revised the model of the LT8310 06/30/14 Added a symbol and model for the LT4220. 06/30/14 Fixed a small memory leak. 06/30/14 Added symbols and models for the LTC2996 and LTC2997. 06/30/14 Revised the model of the LTC2924. 06/26/14 Revised the model of the LT8310. 06/26/14 Revised the model of the LTC3851A-1. 06/24/14 Revised the model of the LT1227. 06/24/14 Revised the model of the LTC4218-12. 06/24/14 Added symbols and models for the LT6119-1 and LT6119-2. 06/24/14 Added a symbol and model for the LT6118. 06/24/14 Added a symbol and model for the LTC4216. 06/24/14 Added a symbol and model for the LTM4630-1. 06/24/14 Revised the model of the LT3840. 06/24/14 Revised the model of the LTC3453. 06/24/14 Revised the model of the LTC3612. 06/24/14 Revised the models of the LT3790, LT3791, and LT3791-1. 06/24/14 Revised the models of the LTC3834, LTC3834-1, LTC3835, and LTC3835-1. 06/09/14 Added a symbol and model for the LT3667. 06/04/14 Improved the netlister's ability to translate node names used in behavioral expressions to reflect node name changes due to jumpers and shorts. 06/02/14 Revised the model of the LTC3615. 05/31/14 Added a symbol and model for the LT3840. 05/31/14 Revised the model of the LTC3374. 05/31/14 Revised the models of the LTC3646 and LTC3646-1. 05/31/14 Further improved the quality of object code from the behavioral expression compilers. 05/31/14 Revised the model of the LTC4020. 05/28/14 Revised the model of the LT3010 05/13/14 Revised the model of the LT8471. 05/12/14 Improved the quality of object code from the behavioral expression compilers. 05/12/14 Added a symbol and model for the LTC3769. 05/02/14 Added a symbol and model for the LTC4230. 05/02/14 Revised the models of the LT4256-1 and LT4256-2. 04/30/14 Added a symbol and model for the LTC3784. 04/30/14 Added symbols and models for the LTC1726-2.5, LTC2953-1, and LTC2953-2. 04/30/14 Added symbols and models for the LTC2950-1 and LTC2950-2. 04/29/14 Improved the operation of one of the A-devices. 04/28/14 Added a symbol and model for the LT3048-15. 04/28/14 Improved the interaction of some of the command line switches. 04/25/14 Trapped a crash mode in the waveform viewer. 04/25/14 Added symbols and models for the LT4250L and LT4250H. 04/25/14 Added a symbol and model for the LT8620. 04/24/14 Added a symbol and model for the LTM8058. 04/23/14 Added some VDMOS models supplied from NXP. 04/23/14 Revised the model of the LT3797. 04/23/14 Revised the model of the LT1784. 04/22/14 Added a symbol and model for the LTC3870. 04/22/14 Revised the model of the LTC3872. 04/22/14 Revised the models of the LTC3646 and LTC3646-1. 04/22/14 Revised the model of the LTC3856. 04/22/14 Revised the models of the LT8610, LT8611, LT8612, and LT8614. 04/22/14 Added symbols and models for the LT3752 and LT8311. 04/22/14 Revised the models of the LTC3621-2, LTC3624, and LTC3624-2. 04/04/14 Reduced the stack requirements for behavioral source evaluation. 04/04/14 Revised the model of the LT3751. 04/04/14 Added a symbol and model for the LT8471. 04/04/14 Trapped a crash mode in the waveform viewer. 04/04/14 Added symbols and models for the LTC6655-1.25, LTC6655-2.048, LTC6655-2.5, LTC6655-3, LTC6655-3.3, LTC6655-4.096, and LTC6655-5. 04/02/14 Revised the model of the LTC2924. 04/01/14 Revised the models of the LTC4215 and LTC4215-2. 03/28/14 Revised the models of the LTC4366-1 and LTC4366-2. 03/28/14 Revised the models of the LTC3838, LTC3838-1, and LTC3838-2. 03/28/14 Revised the models of the LTC3526-2, LTC3526, LTC3526B-2, LTC3526B, LTC3526L-2, LTC3526L, LTC3526LB-2, and LTC3526LB. 03/28/14 Revised the models of the LTC3785 and LTC3785-1. 03/28/14 Revised the symbol of the LT3797. 03/13/14 Added a symbol and model for the LTC2924. 03/12/14 Revised the model of the LTC3851. 03/12/14 Revised the model of the LT8309. 03/12/14 Revised the model of the LT8301. 03/06/14 Added a symbol and model for the LT8710. 03/06/14 Added a symbol and model for the LT3065. 03/06/14 Revised the models of the LTC3869 and LTC3869-2. 03/06/14 Revised the model of the LTC3875. 03/06/14 Revised the model of the LTC3866. 03/06/14 Added a symbol and model for the LT3874. 03/06/14 Added a symbol and model for the LT8301. 03/06/14 Revised the model of the LTC4020. 03/06/14 Revised the models of the LTC3601, LTC3633, LTC3633A,LTC3633A-1,LTC3633A- 2, and LTC3633A-3. 03/06/14 Revised the model of the LTC3851A. 03/06/14 Revised the models of the LTC3646 and LTC3646-1. 03/06/14 Added a symbol and model for the LT8309. 03/03/14 Corrected a error in the small signal .ac evaluation of PNP devices regarding quasi-saturation. 02/21/14 Added symbols and models for the LTC3624 and LTC3624-2. 02/20/14 Added a symbol and model for the LTC3875. 02/20/14 Revised the model of the LT8611. 02/20/14 Revised the model of the LT1158. 02/18/14 Revised the model of the LTC1624. 02/18/14 Revised the model of the LT3797. 02/18/14 Added symbols and models for the LT6654-1.25, LT6654-2.5, LT6654-3, LT6654-5, LT6654-2.048, LT6654-3.3, and LT6654-4.096. 02/12/14 Revised the model of the LT1248. 02/12/14 Revised two jig circuits to illustrate use of .softstart. 02/12/14 Added a symbol and model for the LT3797. 02/07/14 Revised the models of the LT3790, LT3791 and LT3791-1. 02/07/14 Revised the models of the LTC3115-1 and LTC3115-2. 02/07/14 Added a symbol for the LT6238. 02/06/14 Updated the Coilcraft inductor database. 01/31/14 Added symbols and models for the LTC2920-1 and LTC2920-2. 01/31/14 Revised the model of the LTC4260. 01/31/13 Added a symbol and model for the LTC4020. 01/29/14 Improved an aspect of the search function. 01/24/14 Added symbols for the RH1009, RH1056BK, RH1498K, RH1814K, RH1028, RH1128, RH1016, RH6200, RH6105, and RH3080. 01/24/14 Revised the models of the LT4363-1 and LT4363-2. 01/24/14 Revised the model of the LT6013. 01/24/14 Revised the model of the LTC4120. 01/24/14 Revised the model of the LTM4613. 01/24/14 Revised the model of the LT3905. 01/24/14 Revised the models of the LT3796 and LT3796-1. 01/10/14 Added symbols and models for the LTC1726-2.5 and LTC1726-5. 01/02/14 Added a symbol and model for the LTC3330. 12/31/13 Added symbols and models for the LTC2862-1, LTC2862-2, LTC2863-1, LTC2863- 2, LTC2864-1, LTC2864-2, and LTC2865. 12/31/13 Revised the model of the LTC3260. 12/31/13 Revised the model of the LTC3891. 12/20/13 Added a symbol and model for the LT3905. 12/20/13 Added a symbol and model for the LTC2865. 12/20/13 An explanation is now issued if the generic component attribute editor can't edit a particular symbol instances attribute. 12/20/13 Revised the models of the LTC6405 and LTC6406. 12/19/13 Revised the model of the LTC3890-3. 12/17/11 Added a number of MOSFET models graciously supplied by NXP. 12/12/13 Added symbols and models for the LT1641-1 and LT1641-2. 12/12/13 Revised the model of the LT6016. 12/12/13 Fixed an error in the export netlist feature. 12/10/13 .four statements can now be done in post processing with Execute .MEAS Script command. 12/10/13 Fixed the operation of various grid controls under Windows 7. 12/10/13 Resistors with a value of "0" are now treated as jumpers in the netlister. 12/09/13 Added a symbol and model for the LTC4365-1. 12/09/13 Added a symbol and model for the LTM4633. 12/09/13 Revised the model of the LTC3532. 12/09/13 Revised the symbol of the LTC6360. 11/27/13 Revised the model of the LTM4620. 11/27/13 Ctrl-A now selects all in the netlist ASCII editor. 11/27/13 Added a symbol and model for the LT3795. 11/27/13 Revised the models of the LT3651-4.1, LT3651-4.2, LT3651-8.2, and LT3651- 8.4. 11/27/13 Added a symbol and model for the LTC4120. 11/11/13 Added a symbol and model for the LTC4215-2. 11/11/13 Revised the LTC4215 model. 11/11/13 Revised the model of the LTC3261. 11/08/13 Revised the model of the LTC4280. 11/08/13 Revised the models of the LTC4225-2, LTC4227-2, LTC4227-4, LTC4228-2, LTC4225-1, LTC4227-1, LTC4227-3, LTC4228-1, and LTC4229. 11/08/13 Added symbols and models for the LT8610A and LT8610AB. 11/08/13 Revised the models of the LT8610 and LT8611. 11/04/13 Revised the models of the LT8300 and LT8302. 11/04/13 Revised the model of the LT3090. 10/30/13 Added a symbol and model for the LT8302. 10/30/13 Revised the models of the LTC4353 and LTC4370. 10/29/13 Fixed an issue in the counter device's internal state engine. 10/29/13 Revised the models of the LTC1871, LTC1871-1, and LTC1871-7. 10/29/13 Revised the models of the LT3790 and LT3791-1. 10/29/13 Revised the model of the LTC3245. 10/21/13 Revised the models of the LTC4227-1, LTC4227-2, LTC4227-3, and LTC4227-4. 10/21/13 Revised the models of the LTC4228-1 and LTC4228-2. 10/21/13 Revised the models of the LT3791 and LT3791-1. 10/21/13 Added a symbol and model for the LT3790. 10/16/13 Added a symbol and model for the LTC4280. 10/16/13 Revised the model of the LTC3255. 10/15/13 Revised the models of the LTC3499 and LTC3499B. 10/14/13 Revised the models of the LTC4210-1 and LTC4210-2. 10/12/13 Corrected a typo in one of the message boxes. 10/11/13 Added a symbol and model for the LTC4221. 10/11/13 Revised the model of the LT3990. 10/11/13 Revised the model of the LT3973. 10/08/13 Revised the model of the LTC3855. 10/08/13 Revised the models of the LTM4620 and LTM4620A. 10/08/13 Revised the models of the LTM4627, LTM4628, LTM4630, LTM4637, and LTM4649. 10/07/13 Revised the model of the LT3837. 10/07/13 Revised the model of the LTC4278. 10/07/13 Revised the model of the LTM8047. 10/07/13 Added a symbol and model for the LTC1473L. 10/07/13 Added a symbol and model for the LTC4440A-5. 10/07/13 Added a symbol and model for the LTC3255. 10/07/13 Added a symbol and model for the LT8614. 10/07/13 Added a symbol and model for the LTC6902. 10/07/13 Revised the model of the LT8310. 10/07/13 Revised the model of the LT3533. 10/07/13 Revised the model of the LTC3533. 10/07/13 Revised the model of the LTM4613. 10/07/13 Improved the solvers' tolerance to non-physical values of diode emission coefficient. 10/07/13 Added symbols and models for the RH117H and RH117K. 10/07/13 Corrected a typo in the help file. 10/07/13 Added a counter symbol. 10/07/13 Corrected the LT3571 symbol's description annotation. 10/07/13 Improved the uniformity of accepting 3k4 type syntax. 10/07/13 Fixed a GUI issue regarding the FFT dialog. 10/07/13 Trapped a crash mode in parsing a .tf syntax issue. 09/06/13 Added symbols and models for the RH27C and RH37C. 09/06/13 Revised the model of the LT3083. 09/05/13 Added a symbol and model for the LTC1799. 09/05/13 Added a symbol and model for the LTC1798. 09/04/13 Revised the models of the LTC6993-1, LTC6993-2, LTC6993-3, and LTC6993-4. 09/04/13 Revised the model of the LTC6990. 09/04/13 Revised the model of the LTC3863. 09/04/13 Trapped a crash mode in the Field Sync utility. 09/04/13 Revised the models of the LTC3631, LTC3631-3.3 and LTC3631-5. 09/04/13 Added a symbol and model for the LTC4229. 09/04/13 Added a symbol and model for the LTC3607. 09/04/13 Added a symbol and model for the LTC6907. 09/04/13 Added a symbol and model for the RH111. 09/04/13 Added a symbol and model for the LTC6906. 08/28/13 Added a symbol and model for the LTC4415. 08/28/13 Revised the model of the LTC6078. 08/28/13 Added a symbol and model for the LT3090. 08/28/13 Added a symbol and model for the LT3652HV. 08/28/13 Revised the models of the LTC3890 and LTC3890-1. 08/28/13 Revised the models of the LTC1871, LTC1871-1, and LTC1871-7. 08/28/13 Revised the model of the LT8697. 08/20/13 Added a symbol and model for the LTC3115-2. 08/20/13 Revised the models of the LT3008, LT3008-1.2, LT3008-1.5, LT3008-1.8, LT3008-2.5, LT3008-3.3, and LT3008-5. 08/20/13 Revised the model of the LT3954. 08/20/13 Revised the models of the LT3796 and LT3796-1. 08/20/13 Revised the model of the LT8697. 08/13/13 Revised the model of the LT3954. 08/13/13 Revised the model of the LT8705. 08/08/13 Added a symbol and model for the LTM4624. 08/06/13 Revised the model of the LTC3105. 08/05/13 Added symbols and models for the LT3007, LT3007-1.2, LT3007-1.5, LT3007- 1.8, LT3007-2.5, LT3007-3.3, and LT3007-5. 08/05/13 Added a symbol and model for the LT8697. 07/30/13 Added a symbol and model for the RH101A. 07/30/13 Added a symbol and model for the LT3030. 07/30/13 Revised the models of the LTC4218 and LTC4218-12. 07/19/13 Revised the html used in the help documentation. 07/19/13 Revised the model of the LTM8028. 07/19/13 Revised the model of the LTM4676. 07/17/13 Improved layout cross-probing interface to in-house tools. 07/17/13 Added a symbol and model for the LT3514. 07/17/13 Trapped a race condition though could cause a crash in the multithreaded solver when rapidly sequencing through a .step series. 07/16/13 Added symbols and models for the LT4320 and LT4320-1. 07/16/13 Added a symbol and model for the LT8310. 07/11/13 Revised the model of the LTM4676. 07/11/13 A warning is now issued if a resistor's resistance changes sign due to its tempco(s). 07/09/13 Revised the model of the LTC6101. 07/08/13 Revised the model of the LT1218. 07/02/13 Revised the model of the LTC3374. 07/01/13 Revised the model of the LTC3122. 07/01/13 Revised the model of the LTC2057. 07/01/13 Improved the operation of the behavioral delay function. 07/01/13 Revised the model of the LT8705. 06/25/13 Revised the model of the LT1227. 06/25/13 Added a symbol and model for the LTM8050. 06/25/13 Added a symbol and model for the LT3954. 06/24/13 Added a symbol and model for the LT3055. 06/24/13 Added a symbol and model for the LT3081. 06/24/13 Revised the model of the LTC3634. 06/24/13 Revised the model of the LTC3109. 06/17/13 Modified some of the dialogs to be more tolerate of systems with a corrupted MS Sans Serf font. 06/17/13 Added a symbol and model for the LTC2057. 06/17/13 Added a symbol and model for the LT3995. 06/17/13 Added a model for a Si7102DN. 06/17/13 Added a symbol and model for the LTC3630A. 06/17/13 Revised the model of the LTC3630A. 06/11/13 Revised the models of the LT3022, LT3022-1.2, LT3022-1.5, and LT3022-1.8. 06/11/13 Revised the symbol of the LTC6362. 06/11/13 Revised the model of the LT3761. 06/10/13 Added a symbol and model for the LTC3374 06/10/13 The user defined function parser is more forgiving of some types of syntax errors. 06/10/13 Trapped a stack overflow that could happen when reporting user syntax errors. 05/29/13 Revised the model of the LTC3890-3. 05/28/13 Revised the model of the LTC6417. 05/28/13 Added a symbol and model for the LTC3863. 05/28/13 Revised the models of the LT3650-4.1 and LT3650-4.2. 05/28/13 Revised the models of the LTM8061-4.1, LTM8061-4.2, LTM8061-8.2, and LTM8061-8.4. 05/28/13 Revised the model of the LT3763. 05/21/13 Revised the models of the LTC1727-2.5, LTC1727-5, LTC1728-1.8, LTC1728- 2.5, LTC1728-3.3, and LTC1728-5. 05/21/13 Added a symbol and model for the LTC4000-1. 05/21/13 Revised the models of the LTM4620 and LTM4620A. 05/21/13 Revised the model of the LT8582. 05/21/13 Added a symbol and model for the LTC3129. 05/21/13 Revised the model of the LTC3226. 05/21/13 Revised the models of the LTC3890 and LTC3890-2. 05/21/13 Added a symbol and model for the LTC3639. 05/21/13 Revised the model of the LT3763. 05/21/13 Added symbols and models for the LTC4210-1 and LTC4210-2. 05/21/13 Revised the models of the LTC4227-1, LTC4227-2, LTC4227-3, and LTC4227-4. 05/14/13 Exported complex waveform data is now reported to 15 significant figures. 05/14/13 Revised the models of the LTC4225-1 and LTC4225-2. 05/13/13 Added symbols and models for the LTC4228-1 and LTC4228-2. 05/13/13 Revised the models of the LT3796 and LT3796-1. 05/13/13 Added a symbol and model for the LTM4649. 05/13/13 Added a symbol and model for the LTM4637. 05/13/13 Revised the model of the LT8705. 05/13/13 Revised the models of the LTM4620, LTM4620A, LTM4628, and LTM4630. 05/13/13 Fixed a problem reading small, almost empty, schematic files. 05/03/13 Revised the model of the LTC1728-5. 04/29/13 Annotated the LT6108-1, LT6109-1 and LT6109-2 with a note that the product requires a reset on power up. 04/29/13 Revised the models of the LTC4225-1 and LTC4225-2. 04/29/13 Added a symbol and model for the LTM4644. 04/29/13 Revised the model of the LTC3787. 04/22/13 Added a symbol and model for the LTC6909. 04/22/13 Added symbols and models for the LTC3883 and LTC3883-1. 04/22/13 Revised the model of the LTM4676. 04/19/13 Revised the models of the LTC3880 and LTC3880-1. 04/19/13 Corrected an error rendering IO flags in printed output. 04/19/13 Revised the model of the LT8705. 04/18/13 Revised the model of the LTM4603. 04/17/13 Revised the models of the LT4363-1 and LT4363-2. 04/17/13 Revised the models of the LTC1067 and LTC1067-50. 04/17/13 Added symbols and models for the LTC3621 and LTC3621-2. 04/17/13 Revised the models of the LT3517 and LT3518. 04/17/13 If a .four is performed on the current of a SINE voltage source, a power factor correction is now reported based on the THD. 04/11/13 Revised the model of the LTC3829. 04/11/13 Reading a .asc file now aborts at the first error. 04/11/13 Revised the model of the LT1970. 04/05/13 Added a symbol and model for the LTM8045. 04/05/13 Added a symbol and model for the LTC3101. 04/05/13 Added a symbol and model for the LTM4676. 04/05/13 Revised the model of the LTM4603. 04/05/13 Fixed an error netlisting bus bits connected to other nets. 04/01/13 Added a symbol and model for the LT6110. 04/01/13 Revised the model of the LT3763. 04/01/13 Revised the model of the LTC3857. 04/01/13 Revised the model of the LTC3891. 04/01/13 Revised the model of the LTM8001. 03/26/13 Trapped a crash mode regarding reloading plot settings. 03/26/13 Trapped a crash mode in the generic symbol editor. 03/25/13 Added a symbol and model for the LTC4417. 03/25/13 Revised the model for the LT8705. 03/25/13 Revised the model for the LT3504. 03/20/13 Revised the model for the LTC3108. 03/20/13 Revised the model of the LTC3824. 03/19/13 Revised the FDS6680 and FDS6680A MOSFET models. 03/19/13 Revised the model of the LTM4603. 03/19/13 Fixed an issue wrapping trace colors in parametric plots of expressions of real data. 03/15/13 Added a symbol and model for the LTC3226. 03/15/13 Revised the model of the LT6350. 03/12/13 Revised the symbols of the LT3651-4.1, LT3651-4.2, LT3651-8.2, and LT3651- 8.4. 03/14/13 Revised the model of the LT3763. 03/14/13 Added a level 73 MOSFET: HiSIM-HV from Hiroshima University and STARC. 03/12/13 Added symbols and models for the LTC4227-3 and LTC4227-4. 03/12/13 Added symbols for the LT3651-4.1, LT3651-4.2, LT3651-8.2, and LT3651-8.4. 03/12/13 Revised the model of the LT3763 and LT3845A. 03/12/13 Added symbols and models for the LT3971-3.3, LT3971-5, LT3971A, and LT3971A-5. 03/12/13 Revised the model of the LT1784. 03/12/13 Revised the symbol and model of the LTC6246. 03/08/13 Fixed an issue where not all small signal characteristics were computed when the .op was found by inspection. 03/08/13 Added symbols and models for the LTC4226-1 and LTC4226-2. 03/05/13 Added symbols and models for the LTC3838-1 and LTC3838-2. 03/04/13 Added symbols and models for the LT3651-4.1, LT3651-4.2, LT3651-8.2, and LT3651-8.4. 02/28/13 Revised the model of the LTC3808 02/28/13 Revised the model of the LT3957A. 02/28/13 Revised the model of the LTC3864 02/26/13 Revised the model of the LT3973. 02/25/13 Revised the models of the LTC3890, LTC3890-1, LTC3890-2, and LTC3890-3. 02/25/13 Revised the models of the LTC3858, LTC3858-1, and LTC3858-2. 02/25/13 Revised the models of the LT3763 and LTC3245. 02/25/13 Revised the help file. 02/08/13 Added symbols and models for the LTC6995-1 and LTC6995-2. 02/08/13 Revised the models of the LT3652, LT3650-4.1, LT3650-4.2, LT3650-8.2, and LT3650-8.4. 02/07/13 Revised the model of the LT8705. 02/07/13 Added a symbol and model for the LTM4630. 02/07/13 Added a symbol and model for the LT3796-1. 02/07/13 Revised the models of the LT3579 and LT8582. 02/07/13 Revised the model of the LTC3612. 02/07/13 Revised the models of the LTC3550 and LTC3550-1. 02/04/13 Added symbols and models for the LTM8001 and LTM8028. 02/04/12 Revised the model of the LT3761. 01/30/13 Added symbols and models for the LTC3646 and LTC3646-1. 01/30/13 Revised the model of the LTC3600. 01/30/13 Improved the method for hierarchical symbol creation. 01/28/13 Added symbols and models for the LTM4620A and LT3504. 01/28/13 Revised the models of the LTC3789, LT1994, LTC6406, and LTM4606. 01/22/13 Revised the models of the LTC4444 and LTC4444-5. 01/22/13 Added a model of the SUM85N03-06P. 01/22/13 Revised the models of the LTC4370, LTC6102, LTC6103, LT4256-1, and LT4256- 2. 01/22/13 Added symbols and models for the LTC4009, LTC4009-1 and LTC4009-2. 01/22/13 Revised the models of the LTC3633, LTC3633A, LT3741, LT3743, LT3959, LT3763, LT8611, LTC3245, LTC3858 and the LTM8062. 01/22/13 Extended the bus node name syntax to be compatible with in-house tools. 01/10/13 Revised the models of the LT3763, LT3976, LTC3857, LTC3857-1, LTC3891, and LTM8062. 01/10/13 Revised the model of the LT1008. 01/10/13 Added symbols and models for the LT6236 and LT6237. 01/10/13 Revised the models of the LT6230, LT6230-10, and LT6231. 01/10/13 Trapped a crash mode relating to expanding hierarchical schematic blocks with zero components. 01/08/13 Trapped a potential divide by zero in the symbol editor. 01/08/13 Revised the model of the LTC3787 and LTC3788. 01/04/13 Revised the model of the LTC3855. 01/04/13 Added a symbol and model for the LTC2925. 01/04/13 Fixed an issue drawing some global nodes when interfacing with in-house tools. 01/03/13 Fixed an error in transistor database queries regarding polarity. 01/03/13 Fixed an error in the automatic symbol attribute text placement algorithm. 01/02/13 Improved the rendering of the symbol preview in the Select Component Symbol dialog. 12/21/12 Added a symbol and model for the LT8705. 12/21/12 Added a symbol and model for the LT6016. 12/21/12 Revised the model of the LTC3115-1. 12/19/12 Trapped a crash mode regarding long string value symbol attributes. 12/19/12 Revised the models of the LTC1992, LTC1992-1, LTC1992-2, LTC1992-5, LTC1992-10. 12/19/12 Revised the model of the LT1630. 12/19/12 Added symbols and models for the LTC4353 and LTC4370. 12/18/12 Revised the models of the LT8300. 12/18/12 Revised the models of the LT3755 and LT3755-1. 12/17/12 Revised the models of the LTC4364-1 and LTC4364-1. 12/17/12 Revised the model of the LT3955. 12/17/12 Revised the model of the LTC3787. 12/17/12 Revised the models of the LT3791 and LT3791-1. 12/17/12 Corrected one of the syntax hints in the simulation command editor. 12/17/12 Added a symbol and model for the LTC3245. 12/12/12 Added a symbol and model for the LTC6090. 12/11/12 Revised the model of the LT1394. 12/11/12 Corrected the way some global net flags were rendered on the schematic. 12/11/12 Improved the symbol attribute auto arrangement algorithm. 12/07/12 Revised the model for the LT3508. 12/07/12 Improved the speed of some parsing operations. 12/06/12 Revised the models of the LTC3788 and LTC3788-1. 12/06/12 Revised the model of the LTC3786. 12/06/12 Revised the model of the LTC3859. 12/06/12 Improved subcircuit expansion for subcircuit with many hundreds of ports. 12/05/12 Revised the model of the LT1632. 12/05/12 Revised the model of the LTC1255. 12/05/12 Added a symbol and model for the LT3763. 12/05/12 Revised the model of the LTC3864. 11/30/12 Revised the model of the LTC6409. 11/30/12 Revised the model of the LT1010. 11/30/12 Added symbols and models for the LTM8061-4.1, LTM8061-4.2, LTM8061-8.2, and LTM8061-8.4. 11/30/12 Added a symbol and model for the LTC3890-3. 11/30/12 Revised the model of the LTC3626. 11/30/12 Revised the model of the LT3761. 11/27/12 Revised the model of the LT3973. 11/27/12 Revised the model of the LT3761. 11/27/12 Revised the jig circuits for the LT1129 series. 11/27/12 Added a check for positive definite Td for the ideal tranmission line in a transient analysis. 11/16/12 Revised the models of the LTC6247, LTC6247, and LTC6248. 11/16/12 Added a symbol and model for the LTC3890-2. 11/16/12 Removed the comment about port type visibility from the net name editor since the limitation no longer applies. 11/14/12 Added a symbol and model of the LTC3864. 11/14/12 Revised the models of the LT1761-1.2, LT1761-1.5, LT1761-1.8, LT1761-2.5, LT1761-2.8, LT1761-2, LT1761-3.3, LT1761-3, LT1761-5, LT1761-BYP, and LT1761-SD 11/14/12 Revised the model of the LTC6101. 11/14/12 Corrected an error in one of the behavioral expression compilers in the alternate solver. 11/09/12 Removed the reference probe when reopening the same schematic as a different instance of the overall hierarchy. 11/09/12 Improved the responsiveness of the UI during redraws of lengthy MC runs. 11/06/12 Added symbols and models for the LTC4364-1 and LTC4364-2. 11/06/12 Revised the model of the LTM4641. 11/06/12 Revised the models of the LTC3527 and LTC3527-1. 11/06/12 Revised the model of the LT3761. 11/01/12 Revised the model of the LT6210. 11/01/12 Revised the model of the LT6105. 10/29/12 Revised the models of the LTC6252, LTC6253, and LTC6254. 10/29/12 Revised the models of the LT3692A, LT3761, LT3955, and LT3992. 10/22/12 Alt-left-clicking on a plot label now highlights that device or trace in the schematic. 10/22/12 Added a symbol and model for the LT3955. 10/18/12 Added symbols and models for the LTC3633A, LTC3633A-1, LTC3633A-2, and LTC3633A-3. 10/17/12 Added TVS to the types of recognized diodes in the schematic GUI. 10/17/12 Revised the models for the LTC3786 and LTC3787. 10/16/12 Added a symbol and model for the LTC4359. 10/16/12 Added a symbol and model for the LT3761. 10/16/12 Revised the model of the LT8300. 10/15/12 Improved the graphical editing of .op data labels. 10/15/12 Improved the rendering of .op data labels. 10/15/12 Improved the rendering of node labels. 10/15/12 Trapped a crash mode in .dc analysis. 10/09/12 Revised the models of the LTM4608 and LTM4616. 10/09/12 Trapped a crash mode relating to specifying UIC. 10/09/12 Trapped a crash mode due to libc on XP. 10/08/12 Revised the model of the LT3959. 10/08/12 Dramatically reduced the stack space requirements for some types of circuits. 10/04/12 Added a symbol and model for the LT3959. 10/03/12 Added a symbol and model for the LT8300. 10/03/12 Added a model for the FDB3682 MOSFET. 10/01/12 Corrected an error writing component instance attributes that weren't supposed to veto symbol attributes. 09/28/12 Revised the model of the LT3844. 09/27/12 Revised the model of the LTC3891. 09/26/12 Revised the model of the LT1505 and LT1505-1. 09/25/12 Revised the model of the LTC3536. 09/25/12 Revised the model of the LT3956. 09/25/12 Revised the models of the LTC3765 and LTC3766. 09/21/12 Corrected one of the noise equations for MOS1/2/3. 09/21/12 Added a symbol and model for the LTC3861-1. 09/21/12 Revised the models of the LTC3860 and LTC3861. 09/21/12 Added a symbol and model for the LTC3026-1. 09/20/12 Revised the model of the LTC3536. 09/19/12 Added symbols and models for the LT1634-1.25, LT1634-2.5, LT1634-4.096, and LT1634-5. 09/19/12 Revised the models of the LTC3405 and LTC3405A. 09/18/12 Corrected an error in computing the forward and reverse early voltage 09/18/12 Added a symbol and model for the LT4363-1. 09/18/12 Revised the model of the LT4363-2. 09/18/12 Fixed a problem parsing .meas statements. 09/17/12 Revised the models of the LTC3721-1, LTC3723-1, LTC3723-2. 09/17/12 Revised the model of the LTC3891. 09/17/12 Revised the model of the LT3652. 09/17/12 Added a symbol and model for the LTC3122. 09/17/12 Added a symbol and model for the LT3791-1. 09/17/12 Added a symbol and model for the LTC6905. 09/17/12 Revised the models of the LT6230 and LT6230-10. 09/17/12 Revised the model of the LT1028. 09/17/12 Revised the models of the LT6200, LT6200-5, LT6200-10, LT6201, LT6233, and LT6234. 09/14/12 Revised the models of the LT3008, LT3008-1.2, LT3008-1.5, LT3008-1.8, LT3008-2.5, LT3008-3.3, LT3008-5, LT3009, LT3009-1.2, LT3009-1.5, LT3009-1.8, LT3009-2.5, LT3009-3.3, and LT3009-5. 09/14/12 In the diode, MOSFET, bipolar, or JFET selection dialog, Ctrl-C will no paste the model statement onto the ASCII clipboard. 09/10/12 Revised the models of the LT3640 and LT3641. 09/10/12 Revised the model of the LTM8029. 09/10/12 Revised the model of the LT3957A. 09/07/12 Added models for the Si2318CDS and RJK0451DPB MOSFETs. 09/07/12 Revised the models of the LT3975 and LT3976. 09/04/12 Revised the model of the LTC3113. 09/04/12 Improved the speed of some netlisting operations. 09/04/12 Fixed an problem reading some ASCII files. 09/04/12 Revised the model of the LTC3112. 08/30/12 Revised the models of the LTC3388-1 and LTC3388-3. 08/30/12 Revised the model of the LTC3115-1. 08/30/12 Added symbols and models for the LT3975 and LT3976. 08/30/12 Revised the models of the LT8610 and LT8611. 08/30/12 Revised the symbol of the 1210. 08/22/12 Revised the models of the LT1169, LT1462, LT6003, LT6011, LTC6081, LTC6082, LTC6084, LTC6085, LTC6087, LTC6088, and LTC6241. 08/22/12 Revised the model of the LT1011. 08/22/12 Revised the model of the LT1711. 08/22/12 Revised the model of the LTC6078. 08/22/12 Revised the model of the LT1464 and LT1465. 08/21/12 Trapped a crash mode relating to restarting a simulation during a waveform data redraw 08/20/12 Revised the model of the LTC6102. 08/20/12 Added a symbol and model for the LTC3626. 08/20/12 Revised the model of the LT3992. 08/20/12 Revised the model of the LTC6103. 08/10/12 Added symbols for the LTC6240 and LTC6242. 08/04/12 Revised the model of the LTM4606. 08/04/12 Added a symbol and model for the LT3460-1. 07/28/12 Circumvented a Win32 bug regarding stat()'ing files. 07/28/12 Revised the model for the LTC3105. 07/28/12 Revised the model for the LTC3115-1. 07/28/12 Corrected a typo in the help file. 07/28/12 Revised the model for the LTC3630. 07/28/12 Added a symbol and model for the LTC3605A. 07/28/12 Revised the symbol for the LTC3605. 07/12/12 Added symbols and models for the LTC1068, LTC1068-25, LTC1068-50, and LTC1068-200. 07/11/12 Revised the models of the LT3012 and LT3012B. 07/10/12 Revised the model of the LT3480. 07/02/12 Revised the models of the LTC3860 and LTC3861. 06/29/12 Added models for the SiR800DP and SiR802DP MOSFET's. 06/29/12 Revised the model of the LT3988. 06/29/12 Added symbols and models for the LTC1067 and LTC1067-50. 06/29/12 Increased the verbosity of some error messages regarding file permission problems. 06/27/12 Added a symbol and model for the LTC3588-2. 06/22/12 Revised the model of the LT1795. 06/12/12 Revised the model of the LT1794. 06/12/12 Revised the model of the LT1633. 06/12/12 Added symbols and models for the LTC3407A and LTC3407A-2. 06/12/12 Revised the model of the LT1466. 06/11/12 Revised the model of the LT1457. 06/11/12 Revised the models of the LT1209, LT1212, LT1214, and LT1216. 06/11/12 In command line batch mode, the .log.raw file is generated for .step'ed .meas data. 06/11/12 Added a symbol and model for the LTC4071. 06/08/12 Revised the models of the LT3973. 06/08/12 Revised the models of the LTC3545 and LTC3545-1. 06/08/12 Corrected an error in a method used to read one of the in-house binary file formats. 06/07/12 Added a symbol and model for the LTC4070. 06/07/12 Added a symbol and model for the LT1060. 06/07/12 Revised the models of the LT6700-1, LT6700-2, and LT6700-3. 06/07/12 Revised the model of the LT1194. 06/07/12 Revised the model of the LT3957. 06/07/12 Revised the model of the LTC3112. 06/07/12 Added a symbol and model for the LTC3109. 06/07/12 Added the same name filter capability of the Add Trace dialog to the Select Visible Traces dialog. 06/07/12 Revised the model of the LT3791. 06/01/12 Added models for the RJK1051DPB and Si7113DN MOSFET's. 06/01/12 Trapped a situation that could give rise to a crash via internal error number 2. 06/01/12 Added symbols and models for the LT5400-1, LT5400-2, LT5400-3, LT5400-4, LT5400-5, and LT5400-6. 05/31/12 Revised the help file. 05/31/12 Revised the symbol and model of the LT3791. 05/30/12 Revised the model of the LT1189. 05/30/12 Revised the model of the LT1193. 05/30/12 Revised the model of the LT3652. 05/29/12 Revised the symbol and model for the LT1187. 05/29/12 Revised the symbol and model of the LTM8029. 05/29/12 Fixed a problem saving group delay plot plot settings. 05/29/12 Made the UI's acceptance of environmental variables in file path names consistent with the simulator's. 05/24/12 Revised the models of the LTC3613, LTC3833, LTC3838, LTC3839, and the LTC3876. 05/24/12 Fixed a problem where the black reference voltage probe could get stuck on node 0. 05/24/12 Added a symbol and model for the LT3957A. 05/24/12 Revised the model of the LT3796. 05/24/12 Revised the model of the LT6552. 05/24/12 Revised the model of the LT1193. 05/18/12 Added a symbol and model for the LTC3862-2. 05/18/12 On running out of virtual address space during marching waveforms, there is now an attempt not to quit but let the user close windows to free up address space. 05/18/12 Added a symbol and model for the LT3992. 05/18/12 Revised the model for the LT8610 and LT8611. 05/18/12 User preferences such as the most recently used file list are now stored in %APPDATA%\LTspiceIV.ini instead of %WINDIR%\scad3.ini. 05/18/12 LTspice now directs the OS to not use VirtualStore. 05/18/12 Fixed a problem regarding steady state detection. 05/18/12 Added a symbol and model for the LTC2955-2. 05/17/12 Revised the model for the LTM8032. 05/17/12 LTspice now tries to follow capacitor instance IC values even if UIC is not on the .tran command. 05/16/12 Revised the model for the LTM4641. 05/16/12 Revised the symbol for the LT3791. 05/16/12 Added a symbol and model for the LTC2955-1. 05/15/12 Added a symbol and model for the LTC3630. 05/15/12 Revised the model for the LTC3618. 05/15/12 Added native ability to read yet more binary schematic file formats used in-house. 05/15/12 Revised the models for the LT6700-1, LT6700-2 and LT6700-3. 05/15/12 Added symbols and models for the LT3757A and LT3758A. 05/14/12 Improved the clarity of some warning messages regarding models. 05/14/12 Fixed an erroneous circuit compiler optimization that could impact some simulations with mutually coupled inductors. 05/14/12 Fixed a problem where the order of waveform data traces in the .raw file could change with a change in device level. 05/11/12 Made the .param substitution algorithms somewhat more tolerance of misusing curly braces for parenthesis. 05/11/12 Trapped a potential crash mode relating to reading corrupted symbol files. 05/10/12 Added native ability to read more binary schematic file formats used in- house. 05/10/12 Added a symbol and model for the LTC6416. 05/10/12 If an error occurs during netlisting, the output netlist file is deleted in stead of left partially completed. 05/09/12 Added a symbol and model for the LTC3261. 05/09/12 Revised the model of the LTC3632. 05/09/12 Added the jig circuit for the the LTC3252. 05/09/12 Added a symbol and model for the LTC3260. 05/09/12 Added a symbol and model for the LTM8026 05/09/12 Added a symbol and model for the LT3796. 05/09/12 Revised the models of the LTC3785 and LTC3785-1. 05/09/12 Revised the model of the LTM8032. 05/09/12 Revised the models of the LTC3838, LTC3839, LTC3876. 05/09/12 Revised the model of the LTC3833. 05/09/12 Fixed a typo in the help file. 05/09/12 Added a symbol and model for the LTC6417. 05/09/12 Revised the model of the LTC6409. 05/08/12 Corrected an error reading text files for editing. 04/24/12 .func statements are no longer included in the the expanded netlist. 04/24/12 Improved the speed of evaluating some user-defined functions. 04/24/12 Improved the netlist editor's ability to read long cards in decks. 04/23/12 Increased the memory allowed for user defined function evaluation. 04/23/12 Trapped attempted double differentiation of waveform data. 04/23/12 Fixed a problem displaying some node flags like they used to be. 04/20/12 Revised the model of the LT1011. 04/20/12 Revised the model of the LTM8032. 04/20/12 Fixed a problem displaying some .op data flag information. 04/20/12 Revised the model of the LTC3115-1. 04/20/12 Added a model for the AON6242. 04/20/12 Added a symbol and model for the LTM8029. 04/13/12 Added symbols and models for the LTC2960-1, LTC2960-2, LTC2960-3, and LTC2960-4. 04/12/12 Revised the model for the LT6559. 04/11/12 Added a symbol and model for the LT4363-2. 04/11/12 Revised the models of the LTC1992, LTC1992-1, LTC1992-2, LTC1992-5, and LTC1992-10. 04/10/12 Revised the model of the LTC3600. 04/09/12 Added a symbol and model for the LT3791. 04/09/12 Added a symbol and model for the LT3988. 04/09/12 Revised the models for the LT6557 and LT6558. 04/05/12 Revised the model for the LT6554. 04/05/12 Revised the models for the LT6552 and LT6553. 04/05/12 Revised the models for the LT4356-1, LT4356-2, and LT4356-3. 04/05/12 On exiting LTspice, the help file window is now closed as is also is before a Sync Release to free up file perimssions. 04/05/12 xchm is no longer invoked to read the help file when running under Linux. 04/05/12 Revised the help file. 03/28/12 Removed the word "solely" from the License file. 03/28/12 Revised the models for the LTM8022, LTM8023, LTM8025, LTM8031, LTM8032, LTM8033. 03/22/12 Added a symbol and model for the LT1567. 03/22/12 Added symbols and models for the LTC6601-1, LTC6601-2, LTC6605-7, LTC6605- 10, and LTC6605-14. 03/22/12 Revised the models for the LT3014 and LT3014B. 03/21/12 Added a symbol and model for the LT8611. 03/21/12 Culled some redraws of waveform views. 03/20/12 Revised the models for the LT4356-1, LT4356-2, and LT4356-3. 03/20/12 Revised the model for the LT3641. 03/20/12 Revised the model for the LTM8025. 03/19/12 Added symbols and models for the LT1118, LT1118-2.5, LT1118-2.85, and LT1118-5. 03/19/12 Added a symbol and model for the LT8610. 03/19/12 Revised the model for the LTC6241. 03/19/12 The line style for waveform and schematic annotations now defaults to a dotted line. 03/19/12 Alleviated a bug in Windows 7 that causes a redraw during lengthy redraws. 03/19/12 Trapped a crash mode that could occur in loading corrupted waveform files. 03/19/12 The Visible traces menu command is now disabled if the waveform file size is zero. 03/15/12 Revised the model for the LTC3866. 03/14/12 Added a symbol and model for the LT3108-1. 03/08/12 Added symbols and models for the LT1085-3.3, LT1085-3.6, LT1085-5, and LT1085-12. 03/08/12 Added symbols and models for the LT1084-3.3, LT1084-5, and LT1084-12. 03/08/12 Added symbols and models for the LT1083-5 and LT1083-12. 03/08/12 Removed some blank icons from dialogs. 03/08/12 Revised the model for the LTC6078. 03/08/12 Added symbols and models for the LT1175 and LT1175-5. 03/08/12 Trapped a crash mode regarding diodes with m=0. 03/08/12 Added a symbol and model for the LT3973. 03/08/12 Revised the model for the LTC2052. 03/08/12 Added a symbol and revised the model for the LTC2050HV. 03/08/12 Revised the model for the LTC2054. 03/07/12 Revised the model for the LTC2050 and LTC2051. 03/07/12 Revised the model for the LTC1250. 03/06/12 Fixed a error in one of the alternate solver compiler's stack frame object code generation. 03/06/12 Added a symbol and model for the LT3692A. 03/06/12 Added a symbol and model for the LT1185. 03/05/12 Revised the model for the LTC1152. 03/05/12 Added symbols and models for the LT1117, LT1117-2.85, LT1117-3.3, and LT1117-5. 03/01/12 Revised the model for the LTC3588-1. 03/01/12 Revised the model for the LTC1150 and LTC1151. 03/01/12 Added a symbol and model for the LTC3861. 03/01/12 Revised the model for the LTC3860. 03/01/12 Revised the models for the LT1241, LT1242, LT1243, LT1244, and LT1245. 03/01/12 Revised the model for the LTC3765. 03/01/12 Revised the model for the LTC3766. 02/29/12 Revised the model for the LTC1100. 02/28/12 Revised the models for the LT1021-5 and LT1021-10. 02/28/12 Revised the model for the LT1021-7. 02/28/12 Revised the model for the LT1009. 02/27/12 Added symbols and models for the LT3008-1.2, LT3008-1.5, LT3008-1.8, LT3008-2.5, LT3008-3.3, and LT3008-5. 02/27/12 Added symbols and models for the LT1236-5 and LT1236-10. 02/27/12 Revised the models for the LTC1052 and LTC1053. 02/27/12 Revised the model for the LT6650. 02/27/12 Revised the model for the LT3580. 02/24/12 Revised the model for the LT1738. 02/24/12 Revised the model for the LTC3859. 02/24/12 Corrected a typo in the help file. 02/24/12 Revised the model for the LT6411. 02/24/12 Revised the model for the LTC1047. 02/24/12 Revised the model for the LTC1049. 02/24/12 Revised the models for the LTC1050 and LTC1050A. 02/24/12 Revised the model for the LTC1051. 02/24/12 Added a symbol and model for the LT3798. 02/24/12 Added symbols and models for the LT3650-8.2 and LT3650-8.4. 02/24/12 Revised the models for the LT3650-4.1 and LT3650-4.2. 02/16/12 Added symbols and models for the LTC4252C-1 and LTC4252C-2. 02/16/12 Revised the model for the LT1161. 02/15/12 Revised the models for the LTC6401-8, LTC6401-20, and LTC6401-26. 02/15/12 Added a symbol and model for the LTC6401-14. 02/15/12 Revised the model for the LT1639. 02/15/12 Revised the model for the LT1631. 02/15/12 The fast access convert menu command disable state is kept better up-to- date with the file format. 02/14/12 Added symbols and models of the LTC6400-8 and LTC6400-14. 02/14/12 Revised the models of the LTC6400-20 and LTC6400-26. 02/14/12 Corrected a typo in the help file. 02/13/12 Added a symbol and model for the LTC3600. 02/13/12 Revised the models of the LTC3857, LTC3857-1, LTC3890, and the LTC3890-1. 02/13/12 Revised the models of the LT1424-5 and LT1424-9. 02/10/12 Shift key + Cascade toolbar icon now opens iconized windows before displaying in cascade. 02/09/12 Revised the model for the LT1206 and LT1210. 02/09/12 Revised the models for the LTC3838 and LTC3839. 02/08/12 Improved the operation of the ideal diode in .AC analysis in some limit cases. 02/08/12 Added a symbol and model for the LTC3866. 02/08/12 Revised the models of the LTC3868 and LTC3868-1. 02/08/12 Revised the model of the LTC3855. 02/06/12 Modified the select component dialog symbol name spell checker. 02/06/12 Made .measure statements a little forgiving of syntax errors. 02/03/12 Added a symbol and model for the LTC3115-1. 02/03/12 Revised the model of the LT1398. 02/03/12 Revised the models of the LT3751, LTC3765, LTC3766, and LTC3833. 02/03/12 Revised the models of the LTC1541 and LTC1542. 02/03/12 Added symbols and models for the LTC4366-1 and LTC4366-2. 02/02/12 Revised the models of the LT1217, LT1223, LT1227, LT1229, LT1230, LT1259, LT1395, LT1396, LT1397, and the LT1497. 02/01/12 Added a symbol and model for the LT3641. 01/31/12 Revised the model for the LTC1540. 01/30/12 Revised the model for the LTC3709. 01/30/12 Revised the model for the LTC3833. 01/30/12 Revised the models for the LTC1443, LTC1444, and the LTC1445. 01/27/12 Revised the model for the LTC6406. 01/27/12 Revised the models for the LT6600-10, LT6600-2.5, LT6600-20, and LT6600-5. 01/27/12 Added symbols and models for the for the LT6600-15 and LT6600-5. 01/27/12 Revised the symbol and model for the LTC6405. 01/27/12 Added a symbol and model for the LTC1693-5. 01/27/12 Revised the models for the LTC1693-1, LTC1693-2, and LTC1693-3 01/27/12 Revised the model for the LTC3838. 01/27/12 Revised the models for the LTC3726, LTC6908-1, and LTC6908-2. 01/23/12 Revised the symbol and model for the LTC3415. 01/23/12 Revised the model for the LTC3640. 01/23/12 Revised the model for the LTC3891 01/23/12 Revised the models for the LTC6403-1, LTC6404-1, LTC6404-2, and LTC6404-4. 01/23/12 Revised the model for the LTC3103. 01/16/12 Revised the model for the LTC6088. 01/16/12 Revised the models for the LT1719, LTC6087, LT1017, LT1018, LT1713, LT1716 and LT1720. 01/16/12 Revised the models for the LTC3765 and LTC3766. 01/11/12 Added a symbol and model for the LTC4232. 01/11/12 Revised the model for the LT3741. 01/11/12 Revised the model for the LT3581. 01/11/12 Revised the model for the LT3508. 01/11/12 Improved memory utilization for JFET's and MESFET's. 01/11/12 Removed a discontinuity in the MESFET device. 01/11/12 Improved cache utilization for JFET devices. 01/11/12 Revised the ferrite bead library(graciously supplied by W�rth Elektronik). 01/05/12 Adjusted the cache strategy of the alternate solver. 01/04/12 Removed the gmin contribution to BJT substrate current if no other conduction mechanism exists. 01/04/12 Revised the model for the LTC3112. 01/03/12 Revised the model for the LTC3838. 12/23/11 Added a symbol and model for the LTC3839. 12/22/11 Revised the models for the LTC3113, LT3511, and LT3512. 12/22/11 Revised the models for the LTM8047, LTM8048, LT3573, LT3574, and LT3575. 12/21/11 Revised the model for the LTC3766. 12/21/11 Revised the models for the LTC1440, LTC1441, and LTC1442. 12/21/11 Removed some code used the eke the last possible simulation speed out of single threaded machines in the interest of optimizing the speed on multi-threading hardware. 12/21/11 Revised the models for the LTC3601 and LTC3633. 12/19/11 TRBM1 and TRBM1 are now accepted for BJT model parameters TRM1 and TRM2. 12/19/11 Implemented BJT model parameters TVAR1 and TVAR2. 12/19/11 Implemented BJT model parameters TVAF1 and TVAF2. 12/19/11 The LTspice-Gummel-Poon now supports a parasitic PNP to accurately model the substrate behavior of a vertical NPN. The PNP is defined by model parameters p_is, p_bf, p_nf, p_vaf, p_ikf, p_tikf1, p_tikf2, p_isc, p_nc, p_xtb, p_eg, p_xti, and p_renode. 12/19/11 The noise from substrate current in monolithic BJT's is now computed. 12/16/11 Revised the model for the LT3759. 12/15/11 Improved the memory model used in subcircuit expansion. 12/15/11 Revised the models for the LT6700-1, LT6700-2 and LT6700-3. 12/15/11 Revised the models for the LT6703-2 and LT6703-3. 12/15/11 Fixed an error expanding some model names used in subcircuits. 12/15/11 Revised the models for the LT3020, LT3020-1.2, LT3020-1.5, LT3020-1.8. 12/14/11 Revised the models for the LT3050, LT3050-3.3, and LT3050-5. 12/13/11 Added a symbol and model for the LTC3876. 12/12/11 Revised the jig circuit for the LTC3765. 12/12/11 Implemented BJT charge model parameter XCJS. 12/12/11 Tweaked the interpretation of BJT charge model parameters XCJC and XCJC2. 12/09/11 Revised the models for the LTC1841, LTC1842, and LTC1843. 12/09/11 Revised the symbols for the LTC3869 and LTC3869-2. 12/08/11 Added a symbol and model for the LTC3613. 12/08/11 Revised the models for the LTC6404-1, LTC6404-2, and the LTC6404-4. 12/07/11 Revised the model for the LT3957. 12/05/11 Revised the models for the LTC1155 and LTC1156. 12/05/11 Added a symbol and model for the LTC6362. 12/05/11 Revised the models for the LTC3862 and LTC3862-1. 12/05/11 Modified the operation of the gshunt option to exclude internal device nodes. 12/02/11 Added symbols and models for the LTC3625 and LTC3625-1. 12/01/11 Improved the operation of modified trap integration for the last timestep of a simulation. 12/01/11 Revised the models for the LTC3722-1 and LTC3722-2. 11/30/11 Worked around a bug found in many versions of the Adobe .pdf Writer. 11/29/11 Fixed an erroneous circuit compiler optimization that could impact some .noise simulations. 11/28/11 Revised the models for the LTC6087 and LTC6088. 11/28/11 Added symbols and models for the LTC3103 and LTC3104. 11/28/11 Revised the model for the LTC3838. 11/28/11 Revised the model for the LTC3614. 11/28/11 Revised the model for the LT3980. 11/28/11 Corrected voltage source parasitic impedance behavior in .ac analysis for sources mentioned in behavioral sources. 11/11/11 Cleaned up the power pin graphics for a number of opamp symbols. 11/11/11 Revised the symbols and models for the LTC6084 and LTC6085. 11/10/11 In .meas statements, Td can now be an expression instead of a constant. 11/08/11 Revised the symbols and models for the LTC6081 and LTC6082. 11/08/11 Added a symbol and model for the LTC3836. 11/07/11 Trapped a crash mode regarding displayed efficiency reports. 11/07/11 Corrected an error in the MOSFET model database. 11/07/11 Added a symbol and model for the LTC6360. 11/07/11 Revised the models for the LT6402-6, LT6402-12, and LT6402-20. 11/07/11 Revised the model for the LT6105. 11/07/11 Revised the models for the LT1952 and LT1952-1. 11/07/11 Added a symbol and model for the LT8582. 11/07/11 Revised the model for the LT3759. 11/07/11 Added a symbol and model for the LTC3536. 11/07/11 Revised the models for the LTC3858, LTC3858-1, and LTC3858-2. 10/23/11 Revised the model for the LTC3618. 10/17/11 Revised the models for the LT6233, LT6233-10, and LT6234. 10/17/11 Added symbols and models for the LTM8062 and LTM8062A. 10/17/11 Revised the models for the LTC3765 and LTC3766. 10/17/11 Revised the model for the LTC3446. 10/17/11 Revised the model for the LT6220. 10/17/11 Revised the model for the LT1930. 10/16/11 Revised the models for the LT3650-4.1, LT3650-4.2, and LT3652. 10/16/11 Revised the model for the LTC3634. 10/16/11 Added a symbol and model for the LT3759. 10/16/11 Added a symbol and model for the LTC3766. 10/16/11 Revised the models for the LT6230, LT6230-10, and LT6231 10/16/11 Revised the model for the LT3473. 10/08/11 Revised the model for the LT6205. 10/07/11 Revised the models for the LT3652, LT3650-4.1, and the LT3650-4.2. 10/07/11 Revised the models for the LTC3617 and LTC3618. 10/07/11 Revised the model for the LTC3855. 10/07/11 Revised the model for the LT1999-10, LT1999-20 and LT1999-50. 10/06/11 Fixed an error in the small signal operation of the varistor device. 10/01/11 Revised the symbol and model for the LTM8052. 10/01/11 Revised the model for the LT6210 and LT6211. 09/30/11 Added a model of a FDB33N25. 09/30/11 Revised the model for the LT6201. 09/30/11 Revised the model for the LT1671. 09/30/11 Revised the model for the LT1787. 09/30/11 Revised the model for the LTC3633. 09/30/11 Revised the model for the LT3844. 09/30/11 Revised the models for the LTC3810, LTC3810-5, and the LTC3812-5 09/23/11 Revised the model for the LT6106. 09/22/11 Revised the model for the LT6100. 09/21/11 Trapped a crash mode regarding displaying the efficiency report. 09/19/11 Revised the model for the LT3844. 09/19/11 Holding down the wheel while scrolling is now a substitute for mouse wheel tilt. 09/16/11 Revised the model for the LT6013 and LT6014. 09/16/11 Revised the model for the LTC3789. 09/16/11 The legacy XOR waveform cursor is now optionally available. Note that the XOR cursor is not displayed correctly with all video card drivers. 09/15/11 Revised the models for the LT6011 and LT6012. 09/15/11 Revised the models for the LT3050, LT3050-3.3 and LT3050-5. 09/15/11 Revised the model for the LT6010. 09/15/11 Revised the model for the LT6003. 09/15/11 Improved a couple aspects of the ASCII editor for netlist editing. 09/14/11 Added some beta optimizations regarding dangling nodes. Enable with ".options topologycheck=2" 09/14/11 Extended circuit matrix optimization to remove evaluation of dangling nodes. 09/12/11 Added symbols and models for the LT6108-1 and LT6108-2. 09/12/11 Revised the models for the LT6109-1 and LT6109-2. 09/12/11 Revised the model for the LT1812. 09/12/11 Revised the models for the LT6000, LT6001, and LT6002. 09/14/11 Revised the models for the LTC3025 series. 09/12/11 Revised the model for the LTC3026. 09/08/11 Trapped a crash mode in the generic version of the Component Attribute Editor. 09/07/11 Revised the model for the LT1970. 09/07/11 Revised the model for the LTC3615. 09/07/11 Added a model for a FDMC8462 MOSFET. 09/06/11 Revised the model for the LTC2932. 09/06/11 Revised the models for the LTC3873 and LTC3873-5. 09/02/11 Both attached cursors are now accessible simply by clicking on a data trace label. 09/01/11 Multiple schematic text sizes can now be displayed simultaneously. 09/01/11 The BOM is now keep up to date with the schematic even if not manually refreshed. 08/30/11 Revised the model for the LT1722. 08/30/11 Revised the models for the LT1991 and LT1996. 08/30/11 Revised the models for the LTC3880 and LTC3880-1. 08/30/11 Extended the number of fonts available in the waveform viewer and schematics. 08/26/11 Added a symbol and model for the LTC3765. 08/26/11 Revised the model for the LT1990. 08/26/11 Revised the model for the LTC3783. 08/26/11 Option to use the clock to reseed the MC random number generator is now saved between program invocations. 08/26/11 Improved the randomness of clock-seeded random number generator. 08/25/11 Updated the Coilcraft inductor database. 08/25/11 Revised the model for the LTM4606. 08/25/11 Added a symbol and model for the LTC3645. 08/25/11 Revised the models for the LT1993-2, LT1993-4, and LT1993-10. 08/25/11 Added a symbol and model for the LTC6702. 08/25/11 Revised the model for the LT1994. 08/24/11 Revised the model for the LTC3529. 08/23/11 Revised the models for the LT1962 series. 08/23/11 Added a symbol and model for the LTM8048 and LTM8048A. 08/23/11 Added a symbol and model for the LTM8047 and LTM8047A. 08/22/11 Added a symbol and model for the LT3507A. 08/22/11 Added a symbol and model for the LT3799-1. 08/22/11 Revised the model for the LTC3569. 08/22/11 Revised the symbols and models for the LTC3880 and LTC3880-1. 08/22/11 Revised the models for the LT3845 and LT3845A. 08/19/11 Revised the models for the LT3755 and LT3755-1. 08/18/11 Revised the symbol for the LT3688. 08/17/11 Improved the operation of the editor used for inputing annotation text on waveform plots. 08/17/11 Revised the models for the LTC6908-1 and LTC6908-2. 08/16/11 Revised the model for the LT3800. 08/15/11 Revised the model for the LTC6991. 08/15/11 Revised the models for the LTC3855, LTC3869-2, and the LTC3869. 08/15/11 Revised the models for the LT6200, LT6200-5, and the LT6200-10. 08/12/11 Added a symbol and model for the LT3015. 08/12/11 Revised the model for the LTC3880. 08/11/11 Added a symbol and model for the LT3029. 08/09/11 Revised the model for the LT6202. 08/09/11 Added symbols and models for the LT6109-1 and LT6109-2. 08/09/11 Revised the model for the LTM4613. 08/09/11 Revised the models for the LT1208, LT1220, LT1221, LT1224, LT1225, LT1226, LT1351, LT1352, LT1498, LT1630, LT1632, LTC1992-1, LTC1992-2, LTC1992-5, LTC1992- 10, LTC1992, and the LTC6255. 08/09/11 Revised the model for the LTC3601. 08/09/11 Revised the models for the LT1354, LT1357, LT1360, LT1363, LT1462, LT1464, LT1812, LT1813, LT1815, LT1818, and the LT1995. 08/09/11 Revised the model for the LTM4641. 08/09/11 Revised the models for the LTC3855, LTM4620, LTM4627, and the LTM4628 08/09/11 Revised the model for the LTC3869. 08/09/11 Revised the model for the LTC3833. 08/09/11 Added symbols and models for the LT3970-3.3 and LT3970-5. 08/04/11 Added an intrinsic VDMOS model for the 2N7002 and removed the legacy subcircuit version. 08/03/11 Added a symbol and model for the LTC3618. 08/03/11 Added a model for a IRF9640. 08/01/11 Fixed an error computing Rser noise contribution from inductors in transformers. 07/28/11 Revised the symbol and model for the LTC3588-1. 07/27/11 Revised the model for the LTC2053. 07/27/11 Revised the model for the LTC3108. 07/27/11 Revised the model for the LTC3880. 07/27/11 Revised the model for the LT1352 and LT1353. 07/27/11 Added a symbol and model for the LT6107. 07/27/11 Revised the help documentation. 07/27/11 Added a symbol and model for the LTC4225-2. 07/27/11 Added symbols and models for the LTC4225-1 and LTC4225-2. 07/25/11 Revised the model for the LTC3855. 07/25/11 Revised the models for the LTC3857 and LTC3857-1. 07/25/11 Revised the symbol and model for the LT1812. 07/25/11 Revised the model for the LT1815. 07/25/11 Revised the model for the LT1813. 07/25/11 Revised the model for the LT1818. 07/25/11 Revised the model for the LT1886. 07/25/11 Revised the models for the LT1167, LT1168, and LT1920. 07/25/11 Revised the models for the LTC6994-1 and LTC6994-2. 07/25/11 Added a symbol and model for the LTM4641. 07/25/11 Revised the models for the LTC3526-2, LTC3526, LTC3526B-2, LTC3526B, LTC3526L-2, LTC3526L, LTC3526LB-2, LTC3526LB, LTC3527-1, LTC3527, LTC3528-2, LTC3528, LTC3528B-2, LTC3528B, LTC3539-2, and the LTC3539. 07/25/11 Revised the model for the LTC3441. 07/25/11 Revised the model for the LTC3569. 07/25/11 Revised the model for the LT3757. 07/25/11 Revised the models for the LTC1709, LTC1709-7, LTC1709-8, LTC1709-85, LTC1709-9, and LTC3716. 07/01/11 Revised the model for the LTC3880. 07/01/11 Revised the model for the LT1635. 06/30/11 Revised the model for the LT1810. 06/30/11 Revised the model for the LT1809. 06/30/11 Revised the model for the LT1806. 06/30/11 Revised the model for the LT1807. 06/30/11 Added a symbol and model for the LTC3867. 06/30/11 Revised the model for the LTC3543. 06/30/11 Revised the model for the LT3748. 06/27/11 Added a model for the RJK0651DPB mosfet. 06/23/11 Revised the model for the LT1803. 06/23/11 Revised the model for the LT1800. 06/23/11 Corrected an error in the LT1491 symbol. 06/22/11 Corrected the arbitrary capacitance acceptance of m-factor. 06/21/11 Added symbols and models for the LTC3388-1 and LTC3388-3. 06/21/11 Revised the model for the LTC3601. 06/21/11 Added a symbol and model for the LTC3634. 06/21/11 Added a symbol and model for the LTC3617. 06/21/11 Revised the models for the LT1113, LT1169, and 1792. 06/21/11 Revised the models for the LT1789-1 and LT1789-10. 06/21/11 Revised the model for the LT1797. 06/21/11 Revised the model for the LT1793. 06/21/11 Trapped a rare case of extraneous tick labels beyond the plotting pane. 06/13/11 Revised the model for the LT1492. 06/13/11 Revised the model for the LT1632. 06/13/11 Revised the model for the LT1630. 06/13/11 Revised the model for the LT1678. 06/13/11 Revised the model for the LT1677. 06/13/11 Revised the model for the LT3690. 05/31/11 Revised the model for the LT1784. 05/31/11 Revised the model for the LT1672. 05/31/11 Revised the model for the LT3740. 06/03/11 Added a model for a W5AP-LZMZ-5K8L. 06/02/11 Added a model for a FDB8030L FET. 05/31/11 Revised the model for the LTC4000. 05/31/11 Revised the model for the LT1783. 05/26/11 Revised the model for the LT1782. 05/26/11 Revised the models for the LTC3850 and LTC3850-1. 05/25/11 Revised the model for the LT1638. 05/25/11 Revised the model for the LT1637. 05/25/11 Revised the model for the LT1494. 05/25/11 Added a symbol and model for the LT1490A. 05/25/11 Revised the model for the LT1490. 05/25/11 Revised the model for the LT1636. 05/25/11 Added a model for a SiR158DP FET. 05/25/11 Revised the model for the LTM4620. 05/25/11 Revised the model for the LTC4260. 05/25/11 Revised the model for the LT3572. 05/24/11 Added a symbol and model for the LTM4613. 05/24/11 Revised the model for the LTC3880. 05/24/11 Revised the model for the LTC3568. 05/24/11 Revised the model for the LTM8027. 05/24/11 Revised the model for the LT3990. 05/24/11 Improved execution of PWL sources. 05/23/11 Revised the model for the LT3032-5. 05/06/11 Improved the rendering of parametric data plots that have no data traces. 05/06/11 Revised the model for the LTC3789. 05/05/11 Added some diode models. 05/01/11 Trapped a crash mode regarding lossy transmission line waveform storage. 04/29/11 Revised the models for the LTC2934-1, LTC2934-2, LTC2935-1, LTC2935-2, LTC2935-3, and LTC2935-4 04/28/11 Added a symbol and model for the LTC3880-1. 04/28/11 Revised the model for the LTC3113. 04/28/11 Added a number of MOSFET models graciously supplied by International Rectifier Corporation. 04/27/11 Added a programmable keyboard shortcut for viewing the error log. 04/27/11 Revised the models for the LTC3878 and LTC3879. 04/27/11 Added a symbol and model for the LTC4365. 04/26/11 Trapped a crash mode in the complex data compiler. 04/26/11 Revised the model for the LTC3112. 04/26/11 Revised the models for the LTC3834, LTC3834-1, LTC3835, and LTC3835-1. 04/26/11 Trapped a small memory leak regarding .measure statement parsing. 04/15/11 Revised the model for the LT1719. 04/15/11 Revised the models for the LTC1992, LTC1992-1, LTC1992-2, LTC1992-5, and LTC1992-10. 04/15/11 Revised the model for the LT1716. 04/15/11 Added a symbol and model for the LTC3880. 04/15/11 Revised the model for the LT3970. 04/06/11 Revised the model for the LT3692. 04/05/11 Modified real data export file structure so that abscissa data is printed with more significant figures. 04/04/11 Revised the model for the LT3113. 04/04/11 Revised the model for the LT3755 and LT3755-2. 04/01/11 Revised the model for the LT1720 and LT1721. 04/01/11 Added a model for a Si7137DP. 04/01/11 Trapped integer rollover that could occur due to zooming back too far with the mouse wheel. 03/30/11 Revised the model for the LT1713. 03/30/11 Revised the model for the LT1116. 03/29/11 Fixed a problem with the library search path when using a separate directory for output data files. 03/28/11 Fixed a problem parsing complex data for the "Plot .step'ed .data" menu command. 03/28/11 Revised the model for the LT1394. 03/28/11 Trapped a graphics error that could result after some zoom sequences. 03/23/11 Revised the model for the LT1017. 03/23/11 Revised the model for the LT1018. 03/23/11 Extended the interface with some in-house layout tools. 03/23/11 Revised the model for the LTM4628. 03/23/11 Replaced an MFC collection class with a proprietary replacement for 1000x speed up of some parse operations. 03/21/11 Added symbols and models for the LT3032 and LT3032-5. 03/21/11 Elapsed time for fast access file conversion is now reported in the .log file. 03/21/11 Revised the models for the LT3579 and LT3581. 03/18/11 Added a symbol and model for the LT3688. 03/18/11 Revised the models for the LTC3834 and LTC3834-1 03/17/11 Added a number of MOSFET models graciously supplied by International Rectifier Corporation. 03/17/11 Revised the model for the LT1016. 03/16/11 Added symbols and models for the LT3689 and LT3689-5. 03/14/11 Revised the model for the LT3695. 03/14/11 BSIM3 EF is now accepted for all nlev values. 03/14/11 Added symbols and models for the LT3022, LT3022-1.2, LT3022-1.5, and LT3022-1.8. 03/11/11 Revised the model for the LT1464 and LT1465. 03/11/11 Revised the model for the LT1462 and LT1463. 03/11/11 Copy bitmap to clipboard is no longer disabled under WINE/Linux. 03/11/11 Revised the model for the LT1711. 03/10/11 Added a symbol and model for the LT3572. 03/10/11 Added a symbol and model for the LT3083. 03/10/11 Added a symbol and model for the LT3592. 03/10/11 Added symbols and models for the LT3596 and LT3597. 03/09/11 Trapped a situation where BJT capacitances could go negative over temperature. 03/08/11 Revised the models for the LT3845, LT3845A, and the LTM8027. 03/08/11 Revised the models for the LT1363, LT1364, and LT1365. 03/07/11 Revised the model for the LT1995. 03/07/11 Revised the model for the LT3748. 03/07/11 Revised the models for the LT1360, LT1361, and LT1362 03/07/11 Revised the models for the LT1357, LT1358, and LT1359. 03/07/11 Revised the model for the LT3010. 03/07/11 Added a symbol and model for the LTC3113. 03/07/11 Added symbols and models for the LTC3869 and LTC3869-2. 03/07/11 Added a symbol and model for the LTC3858-2. 03/07/11 Added a symbol and model for the LTM4620. 02/26/11 Added a number of MOSFET models graciously supplied by International Rectifier Corporation. 02/26/11 Revised the symbol and model for the LT1351. 02/26/11 Revised the models for the LT1354, LT1355, and LT1356. 02/26/11 Revised the model for the LTM4611. 02/26/11 Added a symbol and model for the LT3692. 02/23/11 Revised the model for the LT1169. 02/22/11 Added a symbol and model for the LTC2932. 02/18/11 Revised the models for the LT1224, LT1225, and LT1226. 02/18/11 Added a symbol and model for the LT3799. 02/15/11 Revised the model for the LTC3602. 02/15/11 Revised the model for the LT3755-1. 02/15/11 Added a symbol and model for the LT3690. 02/14/11 Removed an obsolete method of invoking an over-the-web update. 02/14/11 Revised the models for the LTC6992-1, LTC6992-2, LTC6992-3, and the LTC6992-4. 02/14/11 Revised the models for the LT1208, LT1220, LT1221, and LT1222. 02/14/11 Revised the models for the LT1241, LT1242, LT1243, LT1244, and LT1245. 02/14/11 Added a symbol and model for the LT3686A. 02/11/11 Added symbols and models for the LT3990. 02/11/11 Added symbols and models for the LT3511 and LT3512. 02/11/11 Revised the model for the LTC3833. 02/10/11 Revised the model for the LTC3829. 02/09/11 Revised the model for the LTC3773. 02/09/11 Added a symbol and model for the LTC3891. 02/08/11 Added a symbol and model for the LTC6255. 02/08/11 Added a symbol and model for the LTC6254. 02/08/11 Added a symbol and model for the LTC6253. 02/08/11 Added a symbol and model for the LTC6252. 02/08/11 Added symbols and models for the LT3694 and LT3694-1. 02/07/11 Revised the model for the LT1368 and LT1369. 02/07/11 Revised the model for the LT1366 and LT1367. 02/07/11 Revised the model for the LT1219. 02/07/11 Revised the model for the LT1218. 02/07/11 Fixed an error rendering the bar over negated expressions. 02/04/11 Revised the model for the LTC3789. 02/04/11 Revised the model for the LTC3829. 02/04/11 Revised the model for the LTC3856. 02/02/11 Revised the model for the LTC3833. 02/02/11 Added symbols and models for the LT3650-4.1 and LT3650-4.2. 02/02/11 Revised the model for the LT3652. 02/02/11 Revised the help file. 02/01/11 Revised the model for the LT3574. 02/01/11 Revised the model for the LT3573. 02/01/11 Revised the model for the LT3575. 02/01/11 Revised the model for the LTC3829. 01/28/11 Revised the models for the LTC3025, LTC3025-1, LTC3025-2, LTC3025-3, and LTC3025-4. 01/28/11 Added a symbol and model for the LTC3112. 01/28/11 Trapped a crash mode specific to singular .tf analysis. 01/27/11 Revised the model for the LT3741. 01/27/11 Added support for lookup tables in noise expressions. 01/27/11 SGP BJT models now accept the "noiseless" directive. 01/26/11 Added symbols and model for the LT6210 and LT6211. 01/26/11 Trapped a situation where a new symbol edited in LTspice was not available without restarting. 01/25/11 Added an educational example of a VHF-high/UHF broadcast TV maskhead preamp. 01/24/11 Revised the model for the LTC3616. 01/24/11 Revised the model for the LT1215. 01/24/11 Added a symbol and model for the LT3845A. 01/24/11 Revised the model for the LT1213. 01/24/11 Revised the model for the LT1211. 01/21/11 Added a symbol and model for the LT3652. 01/19/11 Added a symbol and model for the LTC3789. 01/19/11 Revised the model for the LT1208. 01/19/11 Revised the model for the LT1190, LT1191, LT1192, and LT1195. 01/18/11 Revised the model for the LTC6081. 01/18/11 Revised the model for the LTC3615. 01/17/11 Corrected a typo in the help file. 01/14/11 Revised the models for the LTC2902-1 and LTC2902-2. 01/14/11 Revised the models for the LT1190 and LT1191. 01/13/11 Corrected an error in the MEXTRAN504 flicker noise implementation. 01/13/11 Added a symbol and model for the LTC3833. 01/13/10 Added symbols and models for the LT1468-2 and LT1469-2. 01/13/11 Revised the model for the LT1468 and LT1469. 01/12/11 Revised the LT1190 symbol and model. 01/11/11 Revised the model for the LT6003. 01/11/11 Revised the model for the LT3748. 01/10/10 Added a symbol and model for the LTC6104. 01/10/11 Revised the models for the LT118A and LT318A. 01/10/11 Revised the models for the LT1178, LT1179, LT1178A and LT1179A. 01/06/11 Improved the operation of some expression compliers to distinguish data from functions of the same name. 01/05/11 Revised the models for the LTC3770, LTM4601, and LTM4601-1. 01/05/11 Revised the model for the LT1126. 01/05/10 Added a number of MOSFET models graciously supplied by International Rectifier Corporation. 01/05/11 Revised the model for the LTC3615. 01/05/11 Revised the model for the LTC3775. 01/05/11 Revised the model for the LTC3786. 01/05/11 Revised the model for the LT1124 and LT1125. 01/05/11 Revised the model for the LT1122. 01/04/11 Data trace color selection is more consistent when plotting .step'ed complex data. 01/04/11 Added symbols and models for the LT1999-10, LT1999-20 and LT1999-50. 12/22/10 Revised the model test fixtures(jigs) for many of the timer products. 12/22/10 Revised the model for the LT1128. 12/22/10 Revised the model for the LT1028 and LT1115. 12/21/10 Revised the model for the LT3573. 12/21/10 Added a number of MOSFET models graciously supplied by Infineon Technologies Corporation. 12/21/10 Revised the model for the LT3011. 12/21/10 Revised the models for the LTC2954-1 and LTC2954-2. 12/21/10 Added a number of MOSFET models graciously supplied by International Rectifier Corporation. 12/20/10 Improved the parsing of some command line arguments. 12/20/10 Revised the models for the LTC3858 and LTC3858-1. 12/20/10 Revised the models for the LT8410 and LT8410-1. 12/20/10 Revised the models for the LTC3857 and LTC3857-1. 12/20/10 Added a symbol and model for the LTC3787. 12/20/10 Added a symbol and model for the LTC3786. 12/30/10 Revised the LT3741 model. 12/20/10 Added a symbol and model for the LTC6409. 12/09/10 Added symbols and models for the LTC3851A and LTC3851A-1. 12/09/10 Added symbols and models for the LTC2900-1 and LTC2900-2. 12/09/10 Improved the behavior regarding highlighting dataflags. 12/08/10 Fixed a selection operation that could pick both a wire and a line annotation when only the wire should have been picked. 12/08/10 Added a built-in function, Tg(), to allow expressions calling the group delay to be plotted for complex data. 12/08/10 Added a symbol and model for the LTC3105. 12/08/10 Revised the model for the LTC3860. 12/03/10 Revised the models for the LT1101 and LT1101A. 12/03/10 Revised the model for the LT1113. 12/02/10 Added an option to automatically write all files to disk before any simulation. 12/02/10 Revised the model for the LT1097. 12/02/10 Revised the models for the LT1101, LT1101A, LT1077, LT1077A, LT1078, LT1078A, LT1079, LT1079A, LT2078, LT2078A, LT2079, and the LT2079A 11/30/10 Revised the models for the LT1057, LT1057A, LT1057S, LT10578, LT1058, and the LT1058A. 11/30/10 Revised the models for the LT1056 LT1056A, and the LT1056S8. 11/30/10 Revised the models for the LT1055, LT1055A, and the LT1055S8 11/29/10 Trapped a crash model in parsing the plot.defs file. 11/24/10 Revised the models for the LT1022 and LT1022A. 11/23/10 Revised the models for the LT1013, LT1013A, LT1013D, LT1014, LT1014A, and the LT1014D. 11/23/10 Revised the models for the LT1012, LT1012A, LT1012S8, LT1024, and LT1024A. 11/23/10 Revised the models for the LT1884 and LT1885. 11/19/10 Fixed the "Open Plot Defs" button in the control panel. 11/19/10 Revised the LT3748 model. 11/19/10 Revised the models for the LT1241, LT1242, LT1243, LT1244, and the LT1245. 11/19/10 Improved the operation of the spreadsheet symbol attribute editor used when interfaced with in-house tools. 11/15/10 Revised the LT3686 model. 11/15/10 Revised the LT1880 model. 11/15/10 Trapped in crash mode in an undocumented feature. 11/15/10 Revised the LT3748 model. 11/15/10 Revised the LTC3633 model. 11/12/10 Revised the models for the LT1007, LT1007A, and LT1007CS. 11/12/10 Revised the models for the LT1006, LT1006A, and LT1006S8. 11/11/10 Extended the search function to ferrite bead database files. 11/11/10 Trapped a crash mode in the find operation. 11/11/10 Improved the operation of the netlist editor. 11/10/10 Revised the gzip implementation. 11/09/10 Revised the LT1168 jig. 11/08/10 Corrected a typo in the help file. 11/08/10 Revised the LT3214 jig. 11/08/10 Removed the obsolete .app file support. If you have any .app files, rename them .asc files and then you can open them. 11/05/10 Revised the LT3743 model. 11/05/10 Revised the LTC3706, LTC3725, and LTC3726 models. 11/05/10 Revised the LTM4628 model. 11/05/10 Revised the LTM4618 symbol. 11/05/10 Added a symbol and model for the LTC3852. 11/05/10 Added symbols and models for the LTM8042 and LTM8042-1. 11/05/10 Added a symbol and model for the LTM8033. 11/05/10 Plugged a small memory leak in the schematic editor relating to copying data flags. 11/04/10 Improved updating data flags data at other than global scope. 11/04/10 Trapped a potential crash mode relating to data flags at other than global scope. 10/25/10 Revised the LT3958 model. 10/25/10 Revised the LT4356-3 model. 10/25/10 Added a symbol and model for the LT3956. 10/25/10 Revised the model for the LT1002 and LT1002A. 10/22/10 Revised the Assura netlist format. 10/21/10 Added a symbol and model for the LT3575. 10/21/10 3rd party subcircuit definitions can now be pasted on to the schematic at levels other than the top level. 10/21/10 Revised the LT3573 and LT3574 models. 10/20/10 Added a symbol and model for the LTC3816. 10/20/10 Added a symbol and model for the LT3483A. 10/20/10 Revised the LTC3855, LTM4627, and the LTM4628 models. 10/20/10 Added symbols and models for the LTC4218-5 and LTC4218-12. 10/19/10 Revised the LTC3108 model. 10/19/10 Revised the LT3748 model. 10/19/10 Added a symbol and model for the LTC4358. 10/19/10 Revised the LT1001A model. 10/11/10 The .save ^.. syntax now can be applied to port currents. 10/11/10 Revised the LT3508 model. 10/11/10 Revised the LT3748 model. 10/11/10 Added a symbol and model for the LTC6244HV. 10/11/10 Revised the LTC6244 model. 10/08/10 Inductors now accept the "noiseless" directive. 10/08/10 Revised the LTC3723-1 and LTC3723-2 models. 10/08/10 Fixed some typos in the help file. 10/07/10 Revised the LTC3851 and LTC3851-1 models. 10/07/10 Fixed a problem computing the Assura header file path. 10/06/10 Added a .nodealias command. 10/06/10 Revised the LTM4628 symbol. 10/05/10 It is now possible to use .save syntax to tell LTspice what not to save by prepending a name or pattern with the '^' character. 10/05/10 Revised the LT1001 model. 10/04/10 Revised the LTC6990, LTC6991, LTC6992-1, LTC6992-2, LTC6992-3, LTC6992-4, LTC6993-1, LTC6993-2,LTC6993-3, LTC6993-4, LTC6994-1, and LTC6994-2 models. 10/04/10 Revised the LTC6994-2 model. 10/04/10 Revised the LTC6990 model. 09/30/10 Added symbols and models for the LTC4362-1 and LTC4362-2. 09/30/10 Added symbols and models for the LTC4361-1 and LTC4361-2. 09/30/10 Added symbols and models for the LTC4360-1 and LTC4360-2. 09/30/10 Revised the LT3725 model. 09/30/10 Revised the LT3743 model. 09/30/10 Revised the LT3741 model. 09/30/10 Revised the LTC3859 model. 09/30/10 Revised the LT3957 model. 09/30/10 Revised the LT3748 model. 09/30/10 Added a symbol and model for the LT3958. 09/21/10 Trapped a potential crash mode in noise evaluation. 09/21/10 Extended the noise-modeling capability of the OTA device. 09/21/10 Trapped a crash mode in the UI when certain in-house tools were missing. 09/21/10 Fixed a problem in the Assura netlist generation. 09/16/10 Improved operation under Linux when interfaced with in-house CAD tools. 09/16/10 Trapped a divide by zero error. 09/10/10 .op data display flag data can now be pasted to the clipboard in their editor. 09/10/10 Trapped erroneous modified messages regarding editing .op data display flag editing. 09/10/10 The Select Saved Waveforms dialog box is no longer displayed both for the .op data and the main analysis. 09/10/10 Corrected two errors in the help file. 09/09/10 Adjusted the waveform autocolor picker to use all 12 colors. 09/09/10 Fixed a problem that could prevent steady state from being detected. 09/08/10 Fixed a problem that could cause .options plotwinsize=0 to be ignored. 09/06/10 Fixed a problem keeping .step annotations correct. 09/06/10 Trapped a crash mode in one of the compilers. 09/03/10 Fixed a problem the VDMOS subthreshold conduction region. 09/01/10 Clarified a couple messages. 09/01/10 The .op values can now be displayed on the schematic while plotting .ac or .noise data(schematic right button menu->View->Place .op Data Label) 09/01/10 Trapped a situation where the .op data flag display didn't refresh. 08/31/10 Added the ability to accept messages from in-house layout tools are accepted. 08/30/10 Revised the LT3748 model. 08/30/10 Revised the LT3741 model. 08/27/10 Added an interface to allow cross-probing with in-house layout tools. 08/26/10 When a .op simulation is done by itself, you can now place data flags on the schematic. 08/24/10 Revised the LT3748 model. 08/23/10 Extended the command line API for use with in-house layout generation tools. 08/20/10 Revised the LTC3855 model. 08/20/10 Annotated LVS output with optional placement information for use with in- house CAD tools. 08/19/10 Revised the LT3482 model. 08/19/10 Revised the LT1248 model. 08/17/10 Revised the LT6703-3 model. 08/17/10 Revised the LTC3546 model. 08/17/10 Trapped a crash mode parsing bus node syntax errors. 08/13/10 Revised the LTC3890 and LTC3890-1 models. 08/13/10 Revised the LT3748 model. 08/13/10 Added a symbol and model for the LTM4628. 08/13/10 Revised the LT3957 model. 08/13/10 Added symbols and models for the LT3060, LT3060-1.2, LT3060-1.5, LT3060- 1.8, LT3060-2.5, LT3060-3.3, LT3060-3, and LT3060-5. 08/13/10 Added symbols and models for the LT3050, LT3050-3.3, and LT3050-5. 08/13/10 In batch mode, failure to open the input netlist is now printed in a .log file instead of a dialog box. 08/13/10 Removed an inconsistency in bus netlisting between LTspice and some in- house tools. 08/04/10 Improved the accuracy of BJT device terminal current monitoring. 08/04/10 Added a symbol and model for the LT3748. 08/03/10 Added some features for LVS netlist generation used with in-house tools. 07/30/10 Added a symbol and model for the LT3071. 07/30/10 Revised the LTC3612, LTC3614, LTC3615, and LTC3616 models. 07/30/10 Added a symbol and model for the LT3957. 07/30/10 Revised the LT3640 model. 07/30/10 Added a symbol and model for the LT3127. 07/30/10 Revised the LT3980 model. 07/13/10 Revised the LTC4414 model. 07/13/10 Implemented a workaround for a terrible bug in the MS Windows XP x64 thread model that could prevent LTspice from using more than 1563 threads per invocation. 07/13/10 Corrected an optimization error in the waveform viewer expression compiler. 07/11/10 The BOM now lists the mfg for diodes and transistors. 07/09/10 Revised the LTC3415, LTM4608 and LTM4616 models. 07/09/10 Corrected some small signal complex current monitoring for inverted MOS1, 2, and 3. 07/08/10 Trapped a .four syntax error. 07/07/10 Corrected an error in the Yang-Chatterjee charge model small signal implementation for instances of MOSFET's with interchanged source and drain. 07/07/10 Revised the LT3640 model. 07/02/10 Revised the LT1950, LT1952 and LT1952-1 models. 07/01/10 Corrected an error evaluating EXP sources. 07/01/10 Revised the LTM4608 and LTM4616 models. 06/29/10 Improved the pseudo tran algorithm. 06/29/10 Revised the LTC3633 model. 06/29/10 Improved timestep control for some PULSE() sources. 06/25/10 Added symbols and models for the LTC6994-1 and LTC6994-2. 06/25/10 Added symbols and models for the LTC6993-1, LTC6993-2, LTC6993-3, and the LTC6993-4. 06/25/10 Revised the LTC3703-5 model. 06/25/10 Revised the LTC3890 and LTC3890-1 models. 06/25/10 Added a symbol and model for the LT3640. 06/25/10 Modified some memory strategies for machines with more physical RAM than virtual address space. 06/24/10 Revised the LTC4077 model. 06/23/10 Added symbols and models for the LTC2934-1 and LTC2934-2. 06/23/10 Added symbols and models for the LTC2935-1, LTC2935-2, LTC2935-3, and the LTC2935-4. 06/23/10 Revised the LTC3854 model. 06/23/10 Improved waveform compression memory allocation strategy for some passages of simulation data. 06/22/10 Improved operation of library selection when interfaced with in-house tools. 06/22/10 Added more optimizations to some of the behavioral expression compilers. 06/21/10 Revised the LTC3615 model. 06/21/10 Revised the LTC3580 model. 06/16/10 Revised the LT3751 model. 06/16/10 Added a symbol and model for the LTC6990. 06/16/10 Added a symbol and model for the LTC6991. 06/16/10 Added symbols and models for the LTC6992-1, LTC6992-2, LTC6992-3, and the LTC6992-4. 06/16/10 Fixed a problem related to autoranging parametric plots. 06/11/10 Revised the LTC3225 and LTC3225-1 models. 06/11/10 Added a symbol and model for the LTC3829. 06/11/10 Added a symbol and model for the LTC3108. 06/07/10 Revised the LT3492 symbol. 06/04/10 Revised the LTC3602 model. 06/04/10 Corrected an error in library search path. 06/04/10 Revised the LTC3588-1 model. 06/04/10 Revised the LTC3412 and LTC3412A models. 06/03/10 Revised the LT3082 model. 06/03/10 Added a symbol and model for the LTC3856. 06/03/10 Trapped a user error in .four statements. 05/27/10 Revised the LT3751 model. 05/27/10 Fixed a problem integrating capacitors specified by dimensions instead of capacitance. 05/26/10 Added symbols and models for the LT3579 and LT3579-1. 05/25/10 Added a symbol and model for the LTC3521. 05/25/10 Improved netlist printing output. 05/21/10 LTspice is now more tolerant of incorrect PULSE parameters. 05/21/10 In the netlist editor, Left/Right arrows keys now move to the end of the selected text if appropriate. 05/21/10 Added symbols and models for the LTC3526L and LTC3526LB. 05/21/10 Added a symbol and model for the LTC3615. 05/21/10 Revised the LT3844 model. 05/21/10 Right clicking now moves the text cursor to the mouse cursor position if nothing is selected in the netlist viewers. 05/19/10 Added a symbol and model for the LT1761-1.2. 05/14/10 Revised the LT3751 model. 05/14/10 Added a symbol and model for the LTM4608A. 05/14/10 Added a symbol and model for the LT8415. 05/14/10 Added a symbol and model for the LT3581. 05/14/10 Added a symbol and model for the LT3760. 05/14/10 Added a symbol and model for the LT3754. 05/13/10 Revised the LTM8031 model. 05/13/10 Revised the LTC3722-1 model. 05/13/10 Added symbols and models for the LT3663, LT3663-3.3, and LT3663-5. 05/12/10 Added a symbol and model for the LT3492. 05/12/10 Improved memory management of expressions passed to subcircuits. 05/11/10 Added symbols and models for the LT3519, LT3519-1, and LT3519-2. 05/11/10 Improved the documentation of some symbol attributes when LTspice is used interfaced with in-house tools. 05/11/10 Revised the LTC3722-1 and LTC3722-2 models. 05/11/10 Revised the LTC3588-1 model. 05/10/10 Added symbols and models for the LT3695, LT3695-3.3 and LT3695-5. 05/07/10 Added a symbol and model for the LTC3860. 05/07/10 If a simulation is aborted by the user, Fourier and fast access commands are skipped. 05/06/10 Added a symbol and model for the LT3686. 05/04/10 Improved one of the error messages. 05/04/10 Improved the operation of the color palette editor. 05/03/10 Revised the LTC3722-1 and LTC3722-2 models. 05/03/10 Worked around a bug in some video card drivers that affected schematic editing. 05/03/10 Revised the LTC2954-1 and LTC2954-2 models. 05/03/10 Fixed a problem in the monolithic mosfet editor. 04/30/10 Added a symbol and model for the LTC3588-1. 04/29/10 Revised the LTC4215 model. 04/28/10 Added a symbol and model for the LT3970. 04/28/10 Corrected an error in the attribute compiler used with in-house tools. 04/27/10 Improved .nodeset operation. 04/27/10 Revised the LT3494 model. 04/26/10 "scale" is now a synonym for the resistance in a resistor's .model statement. 04/26/10 Added a symbol and model for the LTM8032. 04/26/10 Revised the LTC3722-1 and LTC3722-2 models. 04/26/10 Added a symbol and model for the LTM8031. 04/26/10 Extended the homotopic methods used in the source stepping algorithms. 04/22/10 Implemented Rsercshunt, the ESR of the capacitance of .option cshunt=... 04/22/10 Modified the method used to integrate cshunt capacitances. 04/20/10 Corrected an optimizing error in three of the expression compilers. 04/15/10 Worked around a rare bug in some video card drivers that couldn't XOR a cursor against a black background color. 04/15/10 Revised the LTC3813 model. 04/15/10 Revised the LT3751 model. 04/09/10 Added a symbol and model for the LTC3859. 04/08/10 Fixed an error in one of the ASCII data file formats. 04/08/10 Inappropriate group delay plotting is now disabled. 04/07/10 Added a symbol and model for the LT3574. 04/07/10 Holding down the shift or control key while tiling the windows adjusts now tries new tiling order arraignments. 04/07/10 Revised the LT4356-1, LT4356-2, and LT4356-3 models 04/07/10 Added a symbol and model for the LTC3616. 04/07/10 Added a symbol and model for the LTC3614. 04/07/10 Revised the LT3751 model. 04/07/10 Revised the LT3980 model. 04/05/10 Implemented diode parameters perim, isw, ns, rsw, cjsw, vjsw, mjsw, and fcs. 04/05/10 Revised the LT3580 model. 04/01/10 Revised the LTM8025 symbol and model. 04/01/10 Revised the LT1528 model. 03/29/10 Implemented BSIM3 parameter dtoxcv. 03/29/10 Added a symbol and model for the LT3751. 03/25/10 Revised the LTC6246 model. 03/25/10 Added a symbol and model for the LT3741. 03/24/10 More error conditions are suppressed from throwing up a dialog when running in batch mode. 03/22/10 Added a symbol and model for the LTM4627. 03/22/10 Added a symbol and model for the LTM4618. 03/22/10 Implemented a level 504 bipolar device. 03/16/10 Revised the LTC3865, LTC3865-1, LTC3601, LTC3604, and LTC3633 models. 03/16/10 Parenthesis characters are now trapped from being put in an instance name at the schematic level. 03/16/10 Adjusted the mouse wheel schematic zoom acceleration to be independent of graphic card redraw time. 03/16/10 Added support for the i7-980x. 03/16/10 Added a symbol and model for the LTM4611. 03/16/10 Added a symbol and model for the LTM4610. 03/11/10 Revised the LTC4357 model. 03/11/10 Added a symbol and model for the LT4180. 03/08/10 Fixed a problem selected displayed steps of expressions. 03/08/10 Revised the LTC3855 model. 03/08/10 Added symbols and models for the LTC6087, LTC6088, LTC6246, LTC6247, LTC6248, and LT6350. 03/04/10 Revised the LTC3811 model. 03/04/10 Added a symbol and model for the LTC3633. 03/04/10 Revised the LTC3601 and LTC3604 models. 03/04/10 Revised the LTM8027 model. 03/04/10 Revised the LTC3810 and LTC3810-5 models. 03/04/10 Revised the LTC3857 model. 03/04/10 Added symbols and models for the LTC3865 and LTC3865-1. 02/22/10 Revised the LT1784 model. 02/18/10 Corrected an error in the help file. 02/17/10 It is no longer necessary to type Ctrl-C when pasting between schematics. 02/16/10 Revised the LTC3811 model. 02/16/10 Revised the LTC3419 model. 02/16/10 Added a symbol and model for the LTC3604. 02/16/10 Added a symbol and model for the LTM8027. 02/16/10 Added a symbol and model for the LTM8025. 02/10/10 Extended the operation of the component database sort feature. 02/09/10 Trapped a syntax error regarding parsing the ternary operator. 02/09/10 Added symbols and models for the LT3971 and LT3991. 02/09/10 Revised the LTC3602 and LTC3603 models. 02/09/10 Revised the LTC3788 and LTC3788-1 models. 02/05/10 Improved the format of the expanded netlist. 02/04/10 Trapped a condition where synchronized plot planes could become unlocked. 02/04/10 It's now possible to reverse the sense of the mouse wheel schematic zooming in the control panel. 02/04/10 Schematic mouse wheel scrolling now acts more like Google Maps instead of Google Earth. 02/03/10 The .lib/.inc editor can now open files specified via URL. 02/03/10 When editing or viewing netlists, the context menu now lets you open library files mentioned in .inc or .lib directives. 02/03/10 ASCII files opened from the schematic no longer colorize the first line as a comment. 02/01/10 Revised the LTC3788 and LTC3788-1 models. 02/01/10 Revised the model for the LT3743 model. 01/28/10 Added a symbol and model for the LT2940. 01/28/09 Revised the LTM4601 and LTM4601-1 models. 01/26/10 Fixed a problem using the KSPICE devices in subcircuits. 01/26/10 Revised the LTC3723-1 model. 01/25/10 Revised the LTC3743 model. 01/25/10 Revised the LTC3855 model. 01/22/10 LTspice now profiles the installed graphics card's GPU and circumvents it when LTspice's own graphics routines are faster. 01/21/10 Improved the rendering of some types of plot data. 01/20/10 Trapped some waveform read errors. 01/20/10 Revised the model for the LT3743. 01/14/10 Revised the model for the LT3980. 01/14/10 Added symbols and models for the LTC3788 and LTC3788-1. 01/12/10 Corrected an error in computing the impulse response from a frequency domain data. 01/12/10 Revised the model for the LTC4215. 01/12/10 Revised the model for the LTC3850. 01/11/10 Added a large number of power MOSFET models graciously supplied by Infineon. 01/11/10 Horizontal log axis ticks are now more conventionally placed. 01/11/10 Internal SPICE errors 51 and 114 are now decoded by the UI. 01/11/10 The FFT dialog now supports quadratic interpolation of waveform data before doing the FFT if the underlying waveform data is uncompressed. 01/10/10 Culled some redraws out of the marching waveform algorithm. 01/09/10 The waveform viewers FFT algorithm now supports an arbitrary number of points instead of just a power of 2. 01/08/10 Adjusted some of the autoranging strategies. 01/07/10 Trapped a condition where the waveform viewer could be unaware of a change of waveform file format to fast access. 01/07/10 Improved the operation of the symbol attribute editor. 01/06/10 Sped up the DFFT routines. 01/04/10 Revised the models for the LTC3835 and LTC3835-1. 01/04/10 Improved the sort algorithm for used for waveform names. 01/04/10 Corrected a number of typos in the help file. 01/01/10 Empty string reference designators are now trapped in the UI. 12/28/09 Improved the memory utilization of the macro assembler code generation, assembly, and linking. 12/28/09 Improved the speed of incrementally reading waveforms on those new solid state drives intended to replace spinning harddisks. 12/28/09 The program is now responsive to user input when it's bogged down loading waveform data. 12/18/09 Improved the blanking of retrace lines in some plotting functions. 12/18/09 Added symbols and models for the LTC2954-1 and LTC2954-2. 12/17/09 It's now possible to stipulate a directory for .raw and .log files on the "Waveforms" pane of the control panel. 12/17/09 The up/down keyboard keys now step the attached cursor(s) from trace to trace if the dataset is not .step'ed. 12/16/09 Revised the LTC3708 model. 12/15/09 Improved attribute programablity when interfaced to other in-house CAD tools. 12/15/09 Revised the LTC4269-2 model. 12/14/09 Added a symbol and model for the LT3070. 12/11/09 Added a symbol and model for the LTC4449. 12/11/09 Revised the LTC3857 and LTC3857-1 models. 12/11/09 Not a Number .op point information is now labeled "NaN" instead of left a blank field. 12/10/09 Improved infinite recursion detection in user .param and .func statements. 12/03/09 Added a symbol and model for the LT3980. 11/30/09 Added a symbol and model for the LTC3775. 11/30/09 Added a symbol and model for the LT3743. 11/30/09 Fixed a problem resolving hierarchical some paths. 11/12/09 Improved the schematic capture program's ability to pick an appropriate capacitor symbol. 11/11/09 Revised the LT1573 model. 11/10/09 Added a symbol and model for the LTC3855. 11/10/09 Revised the LTC3857, LTC3857-1, LTC3858, LTC3858-1, LTC3868, and LTC3868-1 models. 11/10/09 Trapped a crash mode relating to calling non-existent device currents in behavioral sources. 11/01/09 Improved the operation of the generic Component Attribute Editor. 10/29/09 Improved the rendering of some dialog headers. 10/29/09 Removed inadvertent temperature dependence from a number of the macro models. 10/29/09 Added symbols and models for the LTC3890 and LTC3890-1. 10/25/09 Revised the LTC3857-1, LTC3857, LTC3858-1, LTC3858, LTC3868-1, LTC3868, and LTM4619 models. 10/25/09 Revised the LT4256-1 and LT4256-2 models. 10/24/09 Improved the bsim4 charge model. 10/19/09 Revised the LTC3612 model. 10/16/09 Fixed a problem with some capacitors used in .ac and .noise simulations. 10/16/09 Improved the bsim3 charge model. 10/16/09 Revised the LTC3834 and LTC3834-1 models. 10/14/09 Added an infinite recursion detector for derived attributes when interfacing with other in-house schematic capture tools. 10/14/09 Trapped more classes of user errors in .AC sweep specifications. 10/13/09 Revised the LTC3830 model. 10/13/09 Resistors now accept a different resistance value to use for .AC analysis. 10/10/09 Added a symbol and model for the LT3682. 10/10/09 Added a symbol and model for the LTC3606B. 10/10/09 Added a symbol and model for the LT3570. 10/10/09 Revised the LTC3412A model. 09/18/09 Revised the LTC3601 and LTC3605 models. 09/18/09 Revised the LTC3546 model. 09/16/09 Added symbols and models for the LTC3619 and LTC3619B. 09/14/09 Revised the LTC3546 model. 09/14/09 Revised the LTC3854 model. 09/14/09 Revised the LTC3214 model. 09/11/09 Improved DC current monitoring accuracy in the bipolar transistor devices. 09/11/09 Corrected an error in the pinout of the LTC6403-1 and LTC6406 symbols. 09/11/09 Corrected the pinout in the LTC6406 symbol. 09/11/09 Added symbols and models for the LTC2912-1, LTC2912-2, and LTC2912-3. 09/10/09 Added a symbol and model for the LTC2930. 09/10/09 Added another DC .op solution strategy. 09/09/09 Improved the efficiency of the routines the merge R, C, and L databases. 09/09/09 The capacitor database server can now cull some erroneous entries that inadvertently entered the database. 09/09/09 Revised the LTC3703 and LTC3703-5 models. 09/09/09 Revised the LTC3858, LTC3858-1, LTC3868, and LTC3868-1 models. 09/09/09 Added a symbol and model for the LTM4619. 09/09/09 Added symbols and models for the LTC3620 and LTC3620-1. 09/09/09 Revised the LT3844 and LT3845 models. 08/25/09 Revised the LTC2913-1, LTC2913-2, LTC2914-1, and LTC2914-2 models. 08/24/09 Improved the arrow key operation in the ASCII netlist editor. 08/24/09 Added a symbol and model for the 3548A. 08/24/09 Added some components to the resistor and capacitor databases. 08/24/09 Added a symbol and model for the LTC3601. 08/24/09 Revised the LTC3605 model. 08/21/09 Added a symbol and model for the LT3742. 08/20/09 Added a symbol and model for the LTC2910. 08/20/09 Revised the LTC3425 model. 08/18/09 Corrected an error block pasting bus taps from one schematic to another. 08/18/09 Revised the LT3513 model. 08/17/09 Corrected an error cross-probing some busses through hierarchy. 08/12/09 Improved parsing of device currents in .four statements. 08/11/09 "meg" is now uniformly accepted as 1e6 in the waveform viewer. 08/11/09 The netlist editor now obeys the insert/overstrike keyboard latch. 08/10/09 Added a symbol and model for the LTC4356-3. 08/10/09 Revised the LTC3857-1, LTC3857, LTC3858-1, LTC3858, LTC3868-1, and LTC3868 models. 08/10/09 Revised the LTC3810 and LTC3810-5 models. 08/10/09 Fixed some numerical problems in the ferromagnetics implementation. 08/02/09 Fixed a problem editing some symbols when interfacing with other in-house CAD tools. 08/01/09 Revised the Yang-Chatterjee charge model to work over absurd user parameters. 07/23/09 Revised for LTC3612 model. 07/23/09 Revised for LT3092 model. 07/22/09 Added symbols and models for the LTC3868 and LTC3868-1. 07/22/09 Added symbols and models for the LTC3858 and LTC3858-1. 07/22/09 Revised the LTC3857 and LTC3857-1 models. 07/22/09 Added symbols and models for the LTC2913-1 and LTC2913-2. 07/22/09 Revised the LTC3722-1 and LTC3722-2 models. 07/22/09 Revised the LTC3850 symbol and model. 07/22/09 Corrected a problem regarding level 2 MOSFET gamma. 07/17/09 Added a symbol and model for the LTC3857. 07/16/09 Sped up subcircuit expansion. 07/16/09 Trapped a crash mode regarding thread timing. 07/15/09 Added symbols and models for the LTC2914-1 and LTC2914-2. 07/15/09 Added warnings when using archaic MOS levels 1, 2, or 3 below reasonable dimensions. 07/15/09 Re-implemented MOS levels 1, 2, and 3 to use the Yang-Chatterjee charge model instead of the Meyer capacitance model. 07/15/09 Improved the accuracy of the computation of the Jacobian for MOS level 3. 07/14/09 Improved the implementation of AC current monitoring in levels 2 and 3 MOS devices. 07/14/09 Corrected a DC current monitoring error in the level 3 MOS device. 07/08/09 Revised the LTC3851 and LTC3851-1 models. 07/08/09 Added symbols and models for the LTC2900-1 and LTC2900-2. 07/07/09 Added a symbol and model for the LTC3612. 07/07/09 Improved BUS netlisting support in hierarchical designs. 07/07/09 Fixed a problem keeping window tab labels in sync with symbol file names. 07/07/09 Added symbols for the LT3755-2 and LT3756-2. 07/07/09 Revised the LT3755, LT3756, LT3755-1, and LT3756-1 models. 07/02/09 Revised the LTC6908-1 and LTC6908-2 models. 07/02/09 Added a symbol and model for the LTC4269-1. 07/02/09 Added a symbol and model for the LTC4265. 07/02/09 Improved the verbosity of some subcircuit expansion syntax error messages. 07/02/09 Revised the LTM4607 and LTM4609 models. 07/01/09 Revised the LTC3780 model. 07/01/09 Revised the LTM4605 model. 06/30/09 Revised the LT6105 model. 06/30/09 Trapped a crash mode that could occur when sync'ing with multiple invocations of LTspice running. 06/30/09 Net names can now be longer than 63 characters. 06/27/09 Added right click menu commands for generating an expanded netlist. 06/23/09 Added context menu command to use the LTspice parser solely for preprocessing and subcircuit expansion. 06/23/09 Node "GND" is more uniformly accepted as a synonym for "0" 06/23/09 Revised the LTC3783 model. 06/23/09 Fixed a problem in the .lib/.lib editor. 06/22/09 Revised the LT3845 model. 06/18/09 Fixed an error in the PBC netlister. 06/16/09 Revised the LT3571 model. 06/12/09 Modified the interpretation of .noise data in some .meas operations. 06/12/09 Trapped a potential memory problem in the uninstall routine. 06/12/09 The automatic symbol generator now accepts subcircuit names with slashes. 06/11/09 Revised the LTC3785 and LTC3785-1 models. 06/11/09 Improved the rendering of some fonts in the ASCII netlist editor. 06/09/09 Fixed a problem in the waveform expression compilers. 06/05/09 Revised the LTC3785 and LTC3785-1 models. 06/04/09 Trapped a potential crash mode. 06/03/09 Revised the LT3585-0, LT3585-1, LT3585-2, and LT3585-3 models. 06/03/09 Improved the handling of the BSIM4 rgeomod parameter. 06/02/09 Added symbols and models for the LTC3850-1 and LTC3850-2. 06/02/09 Added a symbol and model for the LT3092. 06/02/09 The waveform viewer context menu zoom to fit restarts marching waveforms like the main menu did when appropriate. 06/01/09 The linear capacitor edit dialog is now suppressed for arbitrary capacitors. 06/01/09 The automatic symbol generation routine more throughly parses the ASCII .subckt before offering to make the symbol. 05/29/09 Added a symbol and model for the LT1995. 05/29/09 Added a symbol and model for the LTC3782A. 05/29/09 Revised the evaluation of bipolar transistors. 05/28/09 Added a symbol and model for the LTC3729L-6. 05/27/09 Added symbol and model for the LTC3561A. 05/27/09 Fixed a problem regarding PCB netlist export. 05/27/09 Added symbols and models for the LTM4614 and LTM4615. 05/26/09 Added examples of frequency response analysis to the examples/Educational/FRA directory. 05/21/09 Added a symbol and model for the LTM4609. 05/21/09 Added a symbol and model for the LT3571. 05/21/09 Added a symbol and model for the LTC3542-1. 05/15/09 Added symbols for the LTM4601A-1, LTM4601A, LTM4601AHV, LTM4602HV, LTM4603HV and LTM4604A. 05/15/09 Revised the LTM4603 model. 05/14/09 A symbol can now be automatically generated from an ASCII sub circuit. 05/14/09 Trapped a user error regarding lossy transmission lines. 05/13/09 Revised the LTC3836 model. 05/13/09 Added a symbol and model for the LTC4260. 05/13/09 Revised the LTC4215 model. 05/13/09 Added a symbol and model for the LTC3854. 05/13/09 Revised diode recombination current over temperature. 05/11/09 Added a symbol and model for the LTC3526L-2 and LTC3526LB-2. 05/11/09 Added a symbol and model for the LTC3632. 05/10/09 Added pseudo transient as a last resort to finding the operating point. 05/08/09 Fixed some errors regarding the m multiplier and .ac analysis 05/06/09 Improved the way the full grid is drawn on the waveform viewer. 05/05/09 Added a symbol and model for the LTC3528-1. 05/05/09 Revised the LTC3853 model. 05/04/09 Added symbols and models for the LTC3631, LTC3631-3.3, and LTC3631-5. 05/04/09 Revised the LTC3642, LTC3642-3.3, and LTC3642-5 models. 05/04/09 Added symbols and models for the LTC3631, LTC3631-3.3, and LTC3631-5. 05/04/09 Suppressed some superfluous error messages. 05/04/09 Added a symbol and model for the LTC3901. 05/03/09 Trapped the error condition of trying to integrate something besides a noise density from a .noise analysis in the waveform viewer. 05/03/09 Added dialog to assist composing .lib and .inc SPICE directives on a schematic. 05/01/09 Revised the LTC3708 and LTC3709 models. 05/01/09 Fixed a problem executing some menu items from inside a hierarchical navigation. 05/01/09 The information of a default plot settings file is now incorporated even for data files with a single data trace. 05/01/09 Updated the help file. 04/29/09 Revised the LT1963, LT1963-1.5, LT1963-1.8, LT1963-2.5, LT1963-3.3 and models. 04/28/09 Revised the LTC3546 model. 04/27/09 Default integration method always resets to mod trap on program startup. 04/24/09 Unique names are now generated for .fft files when multiple .fft's are created and opened from the same schematic. 04/23/09 Fixed some objectionable behavior of the Control Panel dialog. 04/22/09 Revised the LTC3722-1 and LTC3722-2 models. 04/22/09 Fixed a .param parsing error. 04/22/09 Revised the LTC3708 model. 04/17/09 Fixed a problem cross-probing some pin voltages. 04/16/09 Revised the LTC3425 model. 04/16/09 Revised the LTC3565 model. 04/16/09 Revised the LTC3772-1 and LTC3772-2 models. 04/16/09 Revised the LT1616 symbol. 04/15/09 Added a symbol and model for the LTC3230. 04/15/09 Added a symbol and model for the LT3513. 04/13/09 Modified some right button menus. 04/13/09 Revised the LTC3708 and LTC3709 models. 04/11/09 Improved .meas command parsing. 04/04/09 The data from a .step'ed .meas statements can now be reformated to a .raw file and ploted(View=>SPICE Erorr Log then right button menu). 04/03/09 Added a symbol and model for the LTC3225-1. 04/03/09 Revised the LTC3225 model. 04/02/09 Trapped a divide by zero in the plotting routines. 04/01/09 Revised the LTC3642, LTC3642-3.3, and LTC3642-5 models. 04/01/09 Improved the way the Greek Omega character is rendered in some dialogs. 04/01/09 Added a symbol and model for the LTC3851-1 model. 04/01/09 Revised the LTC3851 model. 04/01/09 Clarified the view of R, C, and L database editor headers. 04/01/09 Unconnected pins can now be cross-probed with shift left click. 04/01/09 Revised the LTC3728 model. 04/01/09 Revised the LT3013 and LT3013B models. 03/30/09 Revised the LTC3850 and LTC3851 models. 03/25/09 Fixed a problem expanding some bus name templates. 03/23/09 Added a symbol and model for the LTC3529. 03/23/09 Adjusted the waveform data compression algorithm. 03/23/09 Revised the LT3845 model. 03/23/09 Modified the cursor behavior in the netlist editor to better coincide with popular Windows text editors. 03/23/09 Trapped in inadvertent interaction between the solver and the UI. 03/23/09 Revised the LT3474 and LT3474-1 models. 03/23/09 Added a symbol and model for the LTC3125. 03/13/09 Added a symbol and model for the LTC3534. 03/13/09 Revised the LTC3853 model. 03/13/09 Added symbols and models for the LTC8410 and LTC8410-1. 03/12/09 PWL data with duplicate consecutive times are now accepted and the average value for that time point is used. 03/11/09 Added a symbol and model for the LTC3546. 03/11/09 Revised the LTC3714 model. 03/11/09 Added symbols and models for the LT3495, LT3495-1, LT3495B, and the LT3495B-1. 03/10/09 Added a symbol and model for the LT3599. 03/09/09 Revised the LTC4215 model. 03/07/09 Fixed an error in subcircuit port current monitoring. 03/05/09 Revised the LT3568 model. 03/04/09 Revised the LT3598 model. 03/04/09 Added some MOSFET models. 03/02/09 Revised the LTC3412 and LTC3412A models. 03/02/09 Removed a small memory leak. 02/27/09 Added a symbol and model for the LT3008. 02/27/09 Added symbols and models for the LT3009, LT3009-1.2, LT3009-1.8, LT3009- 2.5, LT3009-3.3, and LT3009-5. 02/25/09 Added a symbol and model for the LTM8040. 02/25/09 Updated the LT3474 model. 02/25/09 Added a symbol and model for the LTM8032. 02/25/09 Added a symbol and model for the LT3972. 02/25/09 Added a symbol and model for the LT3470A. 02/25/09 Updated the LT3470 model. 02/25/09 Added a symbol and model for the LTC3535. 02/25/09 Updated the LT3477 model. 02/24/09 Added symbols and models for the LTC3878 and LTC3879. 02/24/09 Revised the LTC3851 model. 02/24/09 Revised the LTC3813 and LTC3814-5 models. 02/24/09 Revised the LTC3610 and LTC3611 models. 02/24/09 Revised the LTC3528 model. 02/23/09 Added a symbol and model for the LT3011. 02/23/09 Trapped a crash mode relating to editing the base symbol path. 02/23/09 Added a symbol and model for the LT3085. 02/23/09 Worked around a rare bug in some printer drivers. 02/23/09 Fixed a problem parsing PWL files with spaces. 02/17/09 Added a symbol and model for the LT4356-2. 02/13/09 Added a symbol and model for the LTC3609. 02/13/09 Revised the LTC3569 model. 02/13/09 Revised the LTC3722-2 model. 02/13/09 Revised the LTC3851 model. 02/13/09 Added a symbol and model for the LTC6900. 02/12/09 Slightly modified the DC solvers' homotopy. 02/10/09 A symbol can now be automatically generated for a schematic. 02/09/09 Trapped an internal error in the flux expression complier. 02/09/09 BJT model parameter SUBS now overrides PNP vs LPNP designation. 02/05/09 Duplicate points in a list of .step values are now removed. 02/04/09 Revised LVS netlist generation. 02/04/09 Improved parsing of some ASCII .raw files. 02/03/09 Revised the LTC3722-1 and LTC3722-2 models. 02/03/09 Added a symbol and model for the LT3509. 02/02/09 An extraneous message about pin placement was removed. 02/02/09 Symbol filename case is now preserved while navigating hierarchy. 02/02/09 Added a symbol and model for the LTC3569. 02/02/09 Trapped user errors regarding non-zero Rser voltage sources in a .tf analysis. 01/30/09 Removed an extraneous scroll bar. 01/30/09 Modified auto-placement of some symbol attributes. 01/30/09 Revised the LTC6404-1, LTC6404-2, and LTC6404-4 symbols. 01/29/09 Revised the LT3486 model. 01/26/09 Added a symbol and model for the LTM4606. 01/26/09 Revised the LTC3642, LTC3642-3.3, and LTC3642-5 models. 01/22/09 Added a symbol and model for the LT3598. 01/22/09 Revised the LT1573 model. 01/21/09 Horizontally scrolling waveform data now works with a greater variety of mouse drivers under 32bit Windows XP. 01/20/09 Environment variables may now be used in .lib and .inc path names. 01/20/09 Trapped a crash mode in the matrix compiler regarding running out of memory. 01/19/09 Added a symbol and model for the LTC3565. 01/19/09 Revised the LTC3100, LTC3527, LTC3527-1, LTC3528, and LTC3537 models. 01/19/09 Added a symbol and model for the LT3587. 01/16/09 Mice with tilting wheels can now be used to horizontally scroll in the symbol editor. 01/15/09 Improved the operation of horizontal panning w/ mouse wheel tilt for log plots. 01/14/09 Added a symbol and model for the LT3758. 01/13/09 Added symbols and models for the LTC3541-1, LTC3541-2, and LTC3541-3. 01/13/09 Revised the LTC3541 model. 01/13/09 Added a symbol and model for the LTC3524. 01/13/09 Revised the LTC3523 and LTC3523-2 models. 01/13/09 Added a symbol and model for the LTC3603. 01/13/09 Revised the LT3476 model. 01/13/09 Revised the LT3517 and LT3518 models. 01/13/09 Revised the LT3755 and LT3756 models. 01/13/09 Added a symbol and model for the LT3757. 01/12/09 Revised the LT3573 model. 01/12/09 Trapped a crash mode occuring in machines without SSE2 opcodes. 01/11/09 Mice with tilting wheels can now be used to horizontally scroll waveform data in Vista(and XP with mouse driver installed). 01/10/09 Mice with tilting wheels can now be used to horizontally scroll netlists in Vista(and XP with mouse driver installed). 01/09/09 Mice with tilting wheels can now be used to horizontally scroll schematics in Vista(and XP with mouse driver installed). 01/07/09 atan2(,) now follows the "Use Radian measure" option. 01/07/09 Extended some syntax compatibility with some older SPICE programs. 01/06/09 Improved the operation the Reset Defaults button on the control panel. 01/03/09 Limited the 12/30/08 Windows bug work around to XP since 32bit Vista doesn't exhibit it. 01/03/09 Adjusted the multi-threading strategy on XP x64. 12/30/08 Trapped a crash mode occurring on 32-bit editions of Windows running on an i7. 12/25/08 Improved the utilization of multiple FPU's. 12/03/08 Revised the LT3439 model. 12/03/08 Modified the LTC1983-5 test jig circuit. 12/02/08 Modified wire cleanup when interfacing with in-house tools. 12/02/08 Revised the LTM4605 model. 12/01/08 Fixed a problem netlisting against some in-house tools. 11/21/08 Fixed a problem parsing some lpnp models. 11/20/08 Fixed a problem parsing some .nodeset statements. 11/19/08 Modified pattern matching behavior of the Add Traces dialog. 11/19/08 Revised the LT3750 model. 11/19/08 Revised the LTC1041 model. 11/14/08 Added design notes for a portable PA system in the examples/Educational directory. 11/14/08 Added a symbol and model for the LTC3203. 11/14/08 Revised the LTC1928-5 model. 11/14/08 Revised the LTC3507 model. 11/14/08 Revised the LTC3548, LTC3548-1, and LTC3548-2 models. 11/13/08 When multiple attached cursor readouts are displayed, the active one is now shown on top of any other. 11/12/08 Revised the LTC3407-2 model. 11/12/08 Removed a nag dialog box that flagged attempts to run on OS's older than Win2K. 11/11/08 The find dialog is now resizable an it's positioning is remembered. 11/11/08 More attribute fields can be used for passing parameters in hierarchical schematics. 11/07/08 Added a symbol and model for the LTC4352. 11/07/08 Added symbols and models for the LTC3642, LTC3642-3.3, and LTC3642-5. 11/06/08 The "Asterisks match colons" option is now preserved between invocations of the "Add Traces to Plot" dialog. 11/06/08 The matrix compiler is now disabled on CPU's so old that they don't have the full opcode set. 11/06/08 Fixed a problem where matrix pivoting during profiling could skew the solver to a non-optimum object code generation. 11/05/08 Fixed a problem editing table current sources with the Independent Current Source editor. 11/04/08 Added a symbol and model for the LTC3528B-2. 11/04/08 Added a symbol and model for the LTC3862-1. 11/04/08 Added a symbol and model for the LTC3785-1. 11/04/08 Revised the LTC3415 and LTM4608 models. 11/04/08 Revised the LTM4616 model. 11/04/08 Added a symbol and model for the LTC3605. 11/03/08 Added a symbol and model for the LT7573. 10/21/08 Added symbols and models for the LTC3025-1, LTC3025-2, LTC3025-3, and LTC3025-4. 10/21/08 Revised the LT3825 model. 10/21/08 Added symbols and models for the LTC3672B-1 and LTC3672B-2. 10/21/08 Added symbols and models for the LTC3552 and LTC3552-1. 10/21/08 Added a symbol and model for the LTC3411A. 10/21/08 Added symbols and models for the LTC3550 and LTC3550-1. 10/21/08 Added a symbol for the LTC3417A-1. 10/21/08 Added a symbol and model for the LTC3862. 10/21/08 Added a symbol and model for the LTC3853. 10/21/08 Added a symbol and model for the LTM4612. 10/21/08 Added a symbol and model for the LTC4222. 10/21/08 Revised the LT4356-1 model. 10/21/08 Revised the LTC3726 model. 10/21/08 Completely revamped the convergence test method for BJT's. 10/21/08 Corrected an error in LVS netlist generation. 10/20/08 Corrected an error regarding BJT Rb tempco's. 10/20/08 Corrected an error regarding BJT substrate diode small signal behavior. 10/20/08 Corrected an error regarding BJT Rb tempco's. 10/20/08 Improved the automatic horizontal scrolling behavior of the netlist editor. 10/15/08 In the Add Trace dialog, there is now an option to allow an asterisk to again match a colon. 10/10/08 Revised the LT3740 model. 09/22/08 Revised the LTC3549 model. 09/22/08 Revised the models for the LTC3525-3.3, LTC3525-3, and LTC3525-5. 09/13/08 Fixed a problem pausing and restarting marching waveforms. 09/12/08 Revised the LT1076 model. 09/12/08 Revised the LTC3851 model. 09/12/08 Revised the LTC3705 model. 09/12/08 Revised the LTC3851 model. 09/12/08 Added a symbol and model for the LTC4447. 09/12/08 Revised the LTC4443 and LTC4443-1 models. 09/12/08 Revised the LTC3415 model. 09/12/08 Revised the LTM4608 and LTM4616 models. 09/12/08 Added symbols and models for the LTC3539 and LTC3539-2. 09/12/08 Added a symbol and model for the LTC3670. 09/11/08 Revised some of the redraw algorithms. 09/11/08 Revised the LTC3407 and LTC3407-2 models. 09/04/08 Trapped a crash mode regarding closing unused plot panes. 09/03/08 Revised the LT6552 model. 09/01/08 Adjusted the timestep control for some .tran analysis types. 08/26/08 Fixed a problem interfacing with in-house tools under Windows Vista. 08/26/08 At attempt is made to reduce the amount of redraws in the interest of reducing flicker on slow on/fast off flatpanels. 08/26/08 Added symbols and models for the LTC4217, LTC4217-12, LTC4218, LTC4218-12. 08/25/08 Xchm is now automatically used for viewing the .chm help file under Linux. 08/24/08 Extended the matrix compiler to cover more of the sparse matrix operations. 08/21/08 Revised the LTC3825 model. 08/21/08 Revised the LTC3851 model. 08/21/08 Added a symbol and model for the LTC3564. 08/21/08 Revised the LT3493 and LT3493-3 models. 08/19/08 The space bar is not the default Zoom-to-Fit schematic hot key. 08/19/08 Fixed a problem saving keyboard shortcuts for the numeric pad '+' key. 08/18/08 Added a symbol and model for the LTC3100. 08/18/08 Added symbols and models for the LTC3523 and LTC3523-2. 08/18/08 Revised the LTC3602 model. 08/18/08 Revised the LTC3709 model. 08/18/08 Added a symbol and model for the LTC3225. 08/18/08 Added a symbol and model for the LTC3608. 08/18/08 Revised the LTM4608 and LTM4616 models. 08/18/08 Added a symbol and model for the LTC3212. 08/13/08 Revised the model for the LT1513. 08/13/08 Revised the model for the LT3507. 08/11/08 The netlist editor works a bit more like notepad wrt pasting new lines of text. 08/10/08 The '*' wild card character longer matches ':' so that hierarchy depth is easier to control in, e.g., .save commands. 08/04/08 Revised the LT6650 model. 07/29/08 Added symbols and models for the LTC6403-1, LTC6405, and LTC6406. 07/29/08 Revised the LT4356-1 model. 07/29/08 Revised the LTC4261 model. 07/12/08 Revised LTC1628-PG and LTC3707 models. 07/07/08 Revised some bjt models and evaluation. 07/07/08 Revised the LTC4444 and LTC4444-5 models. 07/01/08 Revised the LTC3221, LTC3221-3.3, and LTC3221-5 models. 06/30/08 Modified the Newton iteration algorithm for the BJT's with Nc and Ne != 1. 06/30/08 Corrected a problem with LPNP substrate conduction over temp with Ns != 1. 06/26/08 The short-circuit protection algorithm of the LT3500 was implemented in the model. 06/25/08 Revised the LTC3873 and LTC3873-5 models. 06/25/08 Revised the LT3496 model. 06/25/08 Revised the LT3782 model. 06/25/08 An empty schematic is now automatically closed if it was only used to open a jig file from the symbol browser. 06/25/08 Revised the LT1939, LT1940, LT1941, LT3493-3, LT3493, LT3500, LT3501, LT3503, LT3505, LT3506, LT3506A, LT3507, LT3508, LT3510, LTC3422, and LTC3425 models. 06/25/08 Revised the LT3487 model. 06/24/08 Added a symbol and model for the LT3493-3. 06/23/08 Added a symbol and model for the LTC1871-1. 06/23/08 Added some LED models. 06/23/08 Added symbols and models for the LTC4443, LTC4443-1, and LTC4444-5. 06/23/08 Improved use of user-defined parameters when both a Laplace and non-linear transfer functions are specified. 06/20/08 Added a symbol and model for the LTM4616. 06/20/08 Revised the LT3517 and LT3518 models. 06/20/08 Revised the LT3755, LT3755-1, LT3756, and LT3756-1 models. 06/20/08 Added a symbol and model for the LTC3706. 06/20/08 Added a symbol and model for the LTC4446. 06/20/08 Revised the LT3500 model. 06/19/08 Corrected an error in the LTC3850 model test fixture. 06/19/08 Revised the LTM4607 model. 06/19/08 Revised the LTM4605 model. 06/19/08 Revised the LTC3780 model. 06/18/08 Revised the LTC3421 model. 06/17/08 Revised the LTC3602 model. 06/17/08 Added a symbol and model for the LTC3802. 06/17/08 Added a symbol and model for the LTC3785. 06/17/08 Added some MOSFET models. 06/17/08 Improved printing of schematics that were zoomed to fit. 06/16/08 Revised the LTC4416 and LTC4416-1 symbols. 06/07/08 Removed some diagnostic code from the alternate solver that created a problem computing diode noise. 06/06/08 Revised the NE555 model. 06/05/08 Added symbols and models for the LTC6404-1, LTC6404-2, and LTC6404-4. 06/05/08 Added a symbol and model for the LT6106. 06/05/08 Added a symbol and model for the LTC3602. 06/04/08 Revised the LT3740 model. 06/03/08 Modified the reverse diode current shotnoise equations. 06/03/08 Revised the LTC3419, LTC3547-1, LTC3547, LTC3547B-1, and LTC3547B models. 06/02/08 Revised the LT1154 model. 06/02/08 Added a symbol and model for the LT6105. 05/30/08 Added a symbol and model for the LTC3537. 05/30/08 Added a symbol and model for the LTC3543. 05/30/08 Added symbols and models for the LTC3722-1 and LTC3722-2. 05/30/08 Revised the LTM4608 model. 05/29/08 Added a symbol and model for the LT3507. 05/27/08 Added some more bipolar transistor models. 05/27/08 Using keywords as node names is better tolerated. 05/22/08 Corrected bjt shot noise computation at low currents. 05/22/08 Corrected diode shot noise computation at low currents. 05/21/08 There's more uniform acceptance of user-defined parameters in Laplace expressions. 05/20/08 The PWL File=... editor now works with names with spaces in them. 05/19/08 Trapped some integer overflow that prevented effective editing and cross probing of schematics. 05/19/08 Trapped a crash mode that could occur during program exit due to font memory. 05/19/08 Revised the LTC3850 model. 05/02/08 Added symbols and models for the LTC3527 and LTC3527-1. 05/02/08 Revised the LTC3528 and LTC3528B models. 05/02/08 Revised the LTC1154 model. 04/23/08 Improved moving the attached cursor with keyboard arrow keys. 04/23/08 Schematics without a single wire can now be netlisted. 04/23/08 Added symbols and models for the LTC3528 and LTC3528B. 04/21/03 Revised the LT3517 and LT3518 models. 04/18/08 Improved the evaluation of some Jacobians. 04/17/08 Fixed a behavioral source expression parsing issue. 04/17/08 Trapped a crash mode regarding attempting waveform integration during simulation. 04/11/08 Added a symbol and model for the LTC3520. 04/11/08 Revised the LTC3811 model. 04/11/08 Added symbols and models for the 3727A-1 and 3727LX-1. 04/07/08 Trapped a crash mode regarding exported waveform data. 04/04/08 Adjusted the way the overstrike bar is rendered in schematic text. 04/04/08 Reduced the restrictions on BUS node names. 04/03/08 Added symbols and models for the LTC3725 and LTC3726. 04/03/08 Added some MOSFET models. 04/03/08 Added a symbol and model for the LTC3811. 04/02/08 Added symbols and models for the LTC6081 and LTC6082. 04/02/03 Revised the LTC1154 model. 03/31/08 Binned MOSFET models can now be scoped to a subcircuit. 03/31/08 Cross-probing macromodel subcircuit pin currents works at hierarchy just like block pin currents. 03/31/08 Not Equal, !=, is now supported in deck expressions. 03/31/08 Added an example of the application of R. David Middlebrook's GFT contributed by Frank Wiedmann. 03/28/08 Added a symbol and model for the LTC3448. 03/28/08 Implemented nlev for SPICE2 BSIM3 noise flavors. 03/26/08 Added a symbol and model for the LTC3446. 03/26/08 Fixed a problem regarding attached cursors when switching between .tran and .ac Nyquist simulations. 03/25/08 Fixed a problem rendering overstrike bar in schematic text. 03/20/08 Added a symbol and model for the LTC3541. 03/20/08 Added a symbol and model for the LT3080-1. 03/19/08 Added symbols and models for the LT6703-2, LT6703-3, LTC6084, LTC6085, LTC6102, LTC6103, LTC6400-20, LTC6400-26, LTC6401-8, LTC6401-20, and LTC6401-26. 03/13/08 A greater fraction of native LTspice features are available when interfacing with in-house CAD tools. 03/13/08 Improved an error message regarding LVS netlist generation. 03/13/08 Revised the LT3470 model. 03/12/08 Added symbols and models for the LTC3406A and LTC3406AB. 03/12/08 Added an option to control the format of .meas statement complex results. 03/11/08 Added a symbol and model for the LTM4605. 03/10/08 Added symbols and models for the LTC3544 and LTC3544B. 03/10/08 Added a symbol and model for the LTM4607. 03/07/08 Added symbols and models for the LTC3545 and LTC3545-1. 03/07/08 Added symbols and models for the LT1965-1.5, LT1965-1.8, LT1965-2.5, and LT1965-3.3. 03/07/08 Implemented bjt parameters tikf1 and tikf2. 03/07/08 Added bjt parameters TBVcbo1 and TBVcbo2 to model the temperature dependence of the onset of C-B avalanche breakdown to the SPICE Gummel-Poon device. 03/06/08 Added a symbol and model for the LT1965. 03/06/08 Added a symbol and model for the LT3498. 03/06/08 Added symbols and models for the LTC3834 and LTC3834-1. 03/06/08 Added symbols and models for the LTC3826 and LTC3826-1. 03/06/08 Added a symbol and model for the LTM4608. 03/05/08 Added a symbol and model for the LTC3805-5. 03/04/08 Added support for multi-line symbol descriptions. 03/04/08 Improved one of the hash table generation algorithms. 03/04/08 Added a symbol and model for the LT3595. 03/04/08 Improved selected saving of currents. 03/03/08 Added a few diode models. 03/03/08 Revised the LTC3708 and LTC3709 models. 03/03/08 Revised the LTC3813 and LTC3814-5 models. 03/03/08 Right clicking on an LTMnnnn device now gives you the option to get the datasheet. 03/03/08 Added a symbol and model for the LTC3851. 03/03/08 Added a symbol and model for the LT3590. 02/29/08 Added a symbol and model for the LT1939. 02/28/08 Added a symbol and model for the LTC3611. 02/28/08 Added a symbol and model for the LT3500. 02/28/08 Added a symbol and model for the LT1912. 02/27/08 Added a symbol and model for the LT1913. 02/27/08 Revised the LT3684 model. 02/27/08 Revised the LT3680 model. 02/27/08 Added a symbol and model for the LT1938. 02/27/08 Added and revised some MOSFET models. 02/27/08 Added a symbol and model for the LTC3563. 02/27/08 Added a symbol and model for the LTC3542. 02/27/08 Corrected a problem evaluating frequency look up tables. 02/26/08 Added a symbol and model for the LTC3419. 02/26/08 Extended display of slope on the status bar when zooming a waveform. 02/24/08 Added bjt parameters BVcbo and nBVcbo to model the onset of C-B avalanche breakdown to the SPICE Gummel-Poon device. 02/22/08 Added a symbol and model for the LTM8021. 02/22/08 Revised the LT3780 model. 02/22/08 Added a symbol and model for the LTM8023. 02/22/08 Added a symbol and model for the LTM8022. 02/22/08 Added a symbol and model for the LT3496. 02/22/08 Added a symbol and model for the LTM8020. 02/22/08 Revised the LT3481 model. 02/20/08 Added a symbol and model for the LTC3873. 02/20/08 Added symbols and models for the LTC3221, LTC3221-3.3, and LTC3221-5. 02/20/08 Added a symbol and model for the LTC3218. 02/19/08 Saving pin current can now be suppressed. 02/19/08 Added symbols and models for the LT3517 and LT3518. 02/19/08 Added symbols and models for the LT3756 and LT3756-1. 02/15/08 The bar(NOT) character attribute tries to automatically limit itself appropriately in schematic text. 02/14/08 Added symbols and models for the LT3755 and LT3755-1. 02/13/08 Added a symbol and model for the LTC3873-5. 02/13/08 Added a symbol and model for the LTC3822-1. 02/13/08 Added a symbol and model for the LTC3823. 02/13/08 Added a symbol and model for the LTC3532. 02/13/08 Added a symbol and model for the LTC3522. 02/13/08 Added a symbol and model for the LTC3454. 02/12/08 Added a symbol and model for the LTC3533. 02/12/08 Added a symbol and model for the LTC3530. 02/12/08 Added a symbol and model for the LTC3538. 02/12/08 Added a symbol and model for the LTC3560. 02/12/08 Added a symbol and model for the LTC3610. 02/12/08 Added symbols and models for the LTC3813 and LTC3814-5. 02/12/08 Revised the LTC3835 and LTC3835-1 models. 02/11/08 Added a symbol and model for the LTC3452. 02/11/08 Added a symbol and model for the LTC3568. 02/10/08 Revised the LT3508 model. 02/09/08 Modified the action of repeated duplications in the symbol editor. 02/08/08 Improved the rendering of some plot trace labels. 02/07/08 Corrected the Flat Top window function. 02/07/08 Corrected the evaluation of the Kaiser-Bessel window function at the endpoints. 02/06/08 Schematic Zoom to Fit is now a user-definable keyboard shortcut. 02/04/08 Improved the action of zooming with the mouse wheel. 02/04/08 Less precise mouse positioning is required to select the PWL file=... syntax button. 02/02/08 Adjusted the EXP independent source operation when the 2nd delay comes before the 1st. 02/02/08 PWL file=... syntax is now supported in the Advanced independent source editor. 02/02/08 Fixed an issue that could prevent BSIM4.6.1 noise from evaluating. 02/01/08 Arcsin() and arccos() are now accepted as synonyms for asin() and acos(). 01/31/08 Added a symbol for the LTC3417A-2. 01/31/08 Updated the help documentation regarding behavioral sources. 01/31/08 Fixed a back annotation problem. 01/30/08 The schematic editor is less adamant about autoscaling. 01/30/08 The netlist editor now automatically scrolls during text selection. 01/29/08 Revised the method used for computing the time domain response from frequency domain specification. 01/29/08 Removed some extraneous data traces from .tf analysis data files. 01/28/08 Fixed a problem reporting complex current in frequency-dependent behavioral transconductances. 01/28/08 LTspice is better at reporting user-errors in .wave syntax. 01/21/08 LTspice is now more tolerant of errors in POLY() syntax. 01/17/08 Added more window options for FFT'ed data. 01/15/08 Behavioral sources using delay(), ddt(), and idt() now work in small signal AC analysis. 01/14/08 Changed the .op behavior of the behavioral delay() function. 01/12/08 Adjusted diode evaluation for N < .1. 01/10/08 Adjusted the level 2 voltage controlled switch evaluation. 01/10/08 Revised the LTC1154, LTC1155 and LTC1156 models. 01/09/08 Fixed a problem double clicking a symbol to descend the hierarchy. 01/09/08 A check is now made during netlist for overlapping identical components. 01/07/08 Added a summary of command line switches in the help documentation. 01/07/08 Adjusted the handling of registered filename extensions. 01/07/08 Revised the LTM4600 and LTM4600HV symbols. 01/03/08 Revised the LT4356-1 model. 01/02/08 Fixed an inter-thread handshake issue. 12/21/07 Fixed a problem regarding attached cursor initial placement. 12/21/07 Revised the LT4356-1 model. 12/19/07 Corrected a problem in some error messages. 12/18/07 Added JFET model parameters nlev and gdsnoi. 12/18/07 Removed a low-level discontinuity from the JFET device. 12/18/07 Corrected an error regarding m multiplier on JFET instances. 12/17/07 Added another source-stepping algorithm -- switch over is automatic. Use .option srcstepmethod=0 or 1 to specify which to try first. 12/17/07 Improved some auto scaling choices when a single trace was plotted because it was the sole trace in the datafile. 12/08/07 Fixed a problem regarding axis ticks are very low resolutions screens. 11/27/07 Added a symbol and model for the LTC4444. 11/26/07 Revised the LT3474 and LT3474-1 models. 11/26/07 Added symbols and models for the LTC4442 and LTC4442-1. 11/16/07 Adjusted the truncation method used to create .wav files. 11/16/07 There is now a diode instance parameter, N, that sets the number of devices in series. 11/16/07 A disk's root directory can now be left as the default working directory. 11/15/07 Fixed a problem regarding extraneous sources in .net simulations. 11/14/07 Fixed a problem regarding opening symbol files from Windows Explorer. 11/06/07 .tf analyses now accept .nodeset hints. 11/05/07 Added symbols and models for the LTC3810, LTC3810-5 and LTC3812-5. 11/05/07 Added a symbol and model for the LTC3773. 11/05/07 Added a symbol and model for the LTC3836. 11/05/07 Fixed a problem plotting .step'ed data from .tf analyses. 10/19/07 Modified the small signal parameter dump under limit cases. 10/18/07 Added a symbol and model for the LT4356-1. 10/18/07 On re-simulation, cross probing is disabled until sufficient valid data is actually available in the waveform file. 10/16/07 Fixed a problem regarding FFT's of .step'ed datasets. 10/15/07 The default window tiling pattern can now be set to vertical in the Tools=>Control Panel=>Operation pane. 10/15/07 Revised the LT3580 model. 10/11/07 An example transmission line inverter was added to the examples/Educational directory. 10/11/07 On re-simulation, all steps are displayed. 10/11/07 Complex data phase branch unraveling can now be optionally turned off. 09/28/07 Revised the LT1494 model. 09/27/07 Revised the LT3478 and LT3478-1 models. 09/27/07 Corrected a status bar message regarding waveform reading status. 09/26/07 Revised the LT3478 and LT3478-1 models. 09/26/07 Changed the inter-thread communication when aborting lengthy waveform loads. 09/26/07 Trapped a inter-thread race lockup condition that occurs under Linux/WINE. 09/16/07 Some .raw files are read in quicker now. 09/15/07 The escape key can now be used to abort reading waveform files. 09/14/07 Color is used to indicate step uniformly across all plot panes when every pane as only one trace in it. 09/14/07 An error regarding plot annotations and multiple plot panes was corrected. 09/13/07 Added a symbol and model for the LTC4357. 09/13/07 Added a symbol and model for the LT3497. 09/12/07 Improved the choice of horizontal axis engineering metric multiplier used after manual plot settings. 09/12/07 Corrected an error regarding subcircuit port current monitoring. 09/12/07 Differences measured by dragging the mouse cursor over the waveform window are now readout with more significant figures when necessary. 09/11/07 Revised the LT3502 and LT3502A models. 09/06/07 Added a symbol and model for the LT3475-1. 09/06/07 Added a symbol and model for the LT3474-1. 09/06/07 Added a symbol and model for the LT3580. 09/05/07 Revised the LT3591 model. 09/05/07 Added a symbol and model for the LT3080. 09/04/07 Revised the LT3021 series of models. 09/04/07 Revised the LT1962 series of models. 08/31/07 A crash mode regarding invalid .stepped circuits is trapped. 08/30/07 Added noise to the ideal diode. 08/29/07 Cleaned up some graphics logic. 08/28/07 Changed XOR gates to participate in the .op solution. 08/28/07 Updated BSIM3 to version 3v3.3.0. 08/16/07 Corrected an error in the BSIM4 small signal AC model. 08/15/07 Trapped a crash mode regarding pasting text. 08/15/07 Corrected a terminal current monitoring error in BSIM4. 08/14/07 Trapped a crash mode regarding attached cursors. 08/14/07 Revised the LT3486 model. 08/10/07 Added a symbol and model for the LT3591. 08/10/07 Added a symbol and model for the LT3693. 08/10/07 Added a symbol and model for the LT3685. 08/10/07 Added a symbol and model for the LT3680. 08/09/07 Fixed a problem in the BSIM4 charge model. 08/08/07 Updated BSIM4 to version 4.6.1. 08/03/07 Added symbols and models for the LTC1727-2.5, LTC1727-5, LTC1728-1.8, LTC1728-2.5, LTC1728-3.3, LTC1728-5. 08/03/07 Added a symbol and model for the LT3508. 08/02/07 Added symbols and models for the LTC3499B and LTC3499B. 08/02/07 Added a symbol and model for the LTC3453. 08/01/07 Added symbols and models for the LT3502 and LT3502A. 08/02/07 Added a symbol and model for the LTC1696. 08/02/07 Added a symbol and model for the LTC3549. 08/01/07 Added symbols and models for the LT1738 and LT1683. 07/31/07 Revised the LTC5505-1 and LTC5505-2 models. 07/31/07 Revised the help documentation. 07/31/07 Revised the LTC3835 and LTC3835-1 models. 07/31/07 Revised the LT3417 and LT3417A models. 07/31/07 Revised the LT1952 and LT1952-1 models. 07/31/07 Revised the LT1310 model. 07/31/07 Revised the LTM4601, LTM4601-1, LTM4603, and LTM4603-1 models. 07/30/07 Added a symbol and model for the LTC3425. 07/30/07 Revised the LTC3412A model. 07/30/07 Revised the LTC3412 model. 07/30/07 Revised the LTC3414 model. 07/30/07 Revised the LTC3413 model. 07/30/07 Revised the LTC3416 model. 07/30/07 Revised the LTC3561 model. 07/30/07 Revised the LTC3411 model. 07/30/07 Revised the LTC3415 model. 07/27/07 Revised the LTC3421 model. 07/25/07 Corrected a problem regarding subcircuit port current monitoring and level 2 voltage controlled switches. 07/25/07 Revised the LTC3850 model. 07/23/07 Some corrupt .plt file formats are trapped. 07/23/07 Corrected a problem with regarding .measure statements in complex datasets. 07/05/07 Removed a lossy transmission line singularity in the Bessel function evaluation. 07/05/07 Added symbols and models for the LTC3708 and LTC3709. 07/03/07 Added a symbol and model for the LTC4355. 07/03/07 Fixed an error in finite difference computation of stepped datasets. 06/27/07 Disk write errors now suggest permission issues as the problem instead of only a full disk. 06/26/07 Modified the recombination current evaluation. 06/16/07 Corrected an LVS netlist for asymmetrical MOSFET's wrt to use with in- house tools. 06/16/07 Corrected an in-house SPICE netlist option behavior. 06/13/07 Revised the LT3482, LT3494 and LT3494A models. 05/31/07 Fixed a problem in one of the Monte Carlo functions in the alternate solver. 05/29/07 Added a symbol and model for the LTC3850. 05/24/07 Revised the LTC3723-2 model. 05/24/07 Added a symbol for the LTM4601HV. 05/24/07 Added symbols and models for the LT3585-0, LT3585-1, LT3585-2, and LT3585- 3. 05/24/07 Added a symbol and model for the LT3681. 05/23/07 Revised the LT3415 model. 05/23/07 Added a symbol and model for the LT3480. 05/23/07 Revised the LT3481 model. 05/22/07 Added a symbol and model for the LTC3407-3. 05/22/07 The "Edit Text on Schematic" dialog will now expand tabs to spaces. 05/21/07 Added a symbol and model for the LTM4604. 05/21/07 Added symbols and models for the LTC3835 and LTC3835-1. 05/21/07 Revised the LT3837 model. 05/21/07 Revised the LTC3216 model. 05/21/07 Added symbols and models for the LTC6078 and LTC6079. 05/18/07 Revised the LT1737 model. 05/07/07 Added symbols and models for the LTC1981 and LTC1982. 05/07/07 Added a LT3684 symbol and model. 05/03/07 Trapped an assertion fault. 05/03/07 Capacitors with m=0 no longer corrupt the efficiency computation. 05/01/07 Revised the LT1635 symbol. 04/30/07 Added a LT3844 symbol and model. 04/30/07 Added symbols and models for the LTC4411, LTC4413, LTC4413-1, and LTC4413- 2. 04/30/07 Added symbols and models for the LTC1155, LTC1156, LTC1157, and LT1161. 04/30/07 Added symbols and models for the LTC1154, LTC1163, and LTC1165. 04/30/07 Added a LTC1255 symbol and model. 04/30/07 Revised the LT3415 model. 04/26/07 Step numbers .measure statement summaries are now labeled in cardinal numbers instead of whole numbers. 04/17/07 Improved one of the internal the hash algorithms. 04/17/07 Adjusted the symbol table sizes. 04/16/07 Revised the LTC1922-1 model. 04/16/07 Revised the LT3470 model. 04/03/07 Revised the LT3020, LT3020-1.2, LT3020-1.5, and LT3020-1.8 models. 04/03/07 Added a symbol and model for the LTC3415. 04/03/07 Added symbols and models for the LTC6908-1 and LTC6908-2. 04/03/07 Added symbols and models for the LT3494 and LT3494A. 04/03/07 Added symbols and models for the LT3825 and LT3837. 04/03/07 Revised the LTC3210, LTC3210-1, LTC3210-2, and LTC3210-3 models. 04/03/07 Revised the LT3021, LT3021-1.2, LT3021-1.5, and LT3021-1.8 models. 04/02/07 Resolved an issue regarding interface to in-house tools. 04/02/07 Worked around a CDC::FillSolidRect() feature. 03/30/07 Revised the LVS netlist header file generation. 03/28/07 Revised the help system to run on Vista. 03/23/07 Worked around a CDC::DrawIcon() feature in Vista. 03/23/07 Adjusted the .wmf output file format for broken .wmf graphical editors. 03/23/07 When doing a Sync Release under Vista, you get a waring if you didn't Run as Administrator. 03/23/07 The moveexe.exe utility gives a better error message wrt Vista UAC. 03/23/07 The attached cursors will no longer be displayed on a step that isn't visible after restarting the simulation. 03/15/07 Revised MOS3 substrate diode depletion capacitance temperature dependence. 03/15/07 Revised VDMOS body diode depletion capacitance temperature dependence. 03/15/07 Revised diode depletion capacitance temperature dependence. 03/01/07 Revised the LT3475 model. 02/27/07 Fixed a problem handling in-line comments in off-line .meas scripts 02/26/07 Added some balun symbols and models supplied by W�rth Elektronik. 02/23/07 Adjusted the auto symbol attribute value routine. 02/23/07 Adjusted the mouse wheel zooming routine. 02/22/07 Corrected an error in the LT1028CS symbol. 02/22/07 Added the option to draw solid lines thicker in the waveform viewer. 02/22/07 Added a MinDeltaGmin parameter option to allow one to program when the DC solver terminates gmin stepping. 02/21/07 Revised the LT1573 model. 02/21/07 Added a check box on the Tools=>Control Panel=>Hacks! pane to allow the MC generator to be reseeded by the real time clock. 02/21/07 Added functions mc(val, tol), flat(x), and gauss(sigma) for user-defined variable to simplify Monte Carlo simulation. 02/21/07 Revised the LT3470 model. 02/21/07 Added a symbol and model for the LT3482. 02/21/07 Adjusted the LVS netlist. 02/17/07 Revised the LT3845 model. 02/09/07 Trapped a memory exception regarding singular matrices. 02/08/07 Revised the LT3013 and LT3013B models. 02/08/07 Added a symbol and model for the LTC3205. 02/08/07 Added symbols and models for the LTC3547, LTC3547-1, LTC3547B, and LTC3547B-1. 02/08/07 Added symbols and models for the LTC3526-2, LTC3526, LTC3526B-2, and LTC3526B. 02/08/07 Added a symbol and model for the LTC3408. 02/08/07 Added a symbol and model for the LTC4215. 02/08/07 A macromodel's test fixture(jig) circuit can be opened from the symbol browser dialog. 02/08/07 Adjusted the autoscaling of the symbol preview in the select component symbol dialog. 02/08/07 Corrected the description of the behavioral phase detector. 02/08/07 Corrected a resize problem on the symbol attribute editor dialog. 02/07/07 Capacitor instance multiplying factors now show up on the BOM. 02/07/07 Fixed a unit reporting issue regarding the horizontal axis of the complex data cursor readout. 02/06/07 Trapped a singularity in evaluating the Jacobian of pwrs(x,y). 02/06/07 The .save dialog remembers its size between invocations. 02/06/07 The select traces to export dialog remembers its size between invocations. 02/06/07 The fastaccess converter dialog remembers its size between invocations. 02/06/07 The Navigate hierarchy dialog remembers its size between invocations. 02/06/07 The edit waveform data annotation text dialog remembers its size between invocations. 02/06/07 The edit schematic annotation text dialog remembers its size between invocations. 02/06/07 The add data trace dialog remembers its size between invocations. 02/06/07 The netlist/error log dialog remembers its size between invocations. 02/06/07 The select waveforms dialog remembers its size between invocations. 02/06/07 The edit plotted expression dialog remembers its size between invocations. 02/06/07 The select steps dialog remembers its size between invocations. 02/06/07 The ferrite bead selection dialog remembers its size between invocations. 02/06/07 The inductor selection dialog remembers its size between invocations. 02/06/07 The resistor selection dialog remembers its size between invocations. 02/06/07 The MOSFET selection dialog remembers its size between invocations. 02/06/07 The JFET selection dialog remembers its size between invocations. 02/06/07 The diode selection dialog remembers its size between invocations. 02/06/07 The capacitor selection dialog remembers its size between invocations. 02/06/07 The bipolar transistor selection dialog remembers its size between invocations. 02/06/07 The symbol attribute editor remembers its size between invocations. 02/06/07 The symbol browser remembers its size between invocations. 02/06/07 The symbol Pin table dialog remembers its size between invocations. 02/06/07 The Component Attribute Editor dialog remembers its size between invocations. 02/06/07 Corrected an error in the LT1720/LT1721 model. 02/05/07 Added a symbol and model for the LTC3805. 02/02/07 Fixed a problem using .step and fastaccess in the same data file. 02/02/07 Trapped a crash mode regarding unplotable data. 02/02/07 Added some diode and MOSFET models. 02/02/07 A macromodel's test fixture(jig) circuit can be opened from the dialog seen after right clicking on an symbol instance.. 02/02/07 Revised the LT3483 model. 02/01/07 Removed the obsolete 1pole and 2pole symbols(Use the UniversalOpamp2 instead). 01/25/07 Added symbols and models for the LT6000, LT6001, LT6002, LT6003, LT6004, LT6005, LT6402-6, LT6402-12, LT6402-20, LT6552, LT6557, LT6558, LT6559, and LTC6244. 01/25/07 Revised the LT1494, LT1671, LT1716, LT1011, LT1017, LT1018, LT1803 and LTC6241 models. 01/25/07 Revised the LT1128 symbol and model. 01/25/07 Revised the LT1028 symbol and model. 01/25/07 Revised the LT1719 symbol and model. 01/25/07 Revised the LT1494/5 model. 01/25/07 Added a symbol and model for the LT3845. 01/22/07 Revised the LT3013 and LT3013B models. 01/22/07 Revised the LT1009 model. 01/22/07 Added some new netlist attributes for interfacing with in-house tools. 01/16/07 Increased error verbosity for .measure statements in .step'ed simulation datasets. 01/16/07 Removed an extraneous warning about fewer than two connections to VDMOS gates. 01/08/07 The number of .save data entries is no longer limited to 4096 but limited to address space. 12/19/06 Trapped a small memory leak regarding .nodeset statements. 12/19/06 Resolved a difference in the the the two solvers interpreted .nodeset statements. 12/15/06 Revised the LTC3822 jig circuit. 12/15/06 Revised the LTC3828 symbol and model. 12/15/06 Revised the Si7884DP model. 12/14/06 Removed some extraneous output diagnostic message files. 12/13/06 Added a symbol and model for the LTC4416. 12/13/06 Added a symbol and model for the LTC4414. 12/13/06 Added a symbol and model for the LTC4261. 12/07/06 Revised the LT3413 model. 12/07/06 Revised the LT3501 model. 12/07/06 Corrected an error in the 1st datapoint of .step'ed .tran datasets with non-zero Time to Start Saving Data values. 12/07/06 Revised the LT3510 model. 12/07/06 Corrected an error labeling the units of the peak response of complex data bandwidth integration. 12/06/06 Removed the obsolete synthesizer. 12/06/06 Removed the obsolete .app circuit browser. 12/06/06 Corrected a problem showing the phase as a dashed line for expressions of complex data. 12/06/06 Fixed a problem navigating a hierarchal schematic with double clicks during cross probing. 11/02/06 Added a symbol and model for the LTC2908-C1. 11/02/06 Added a symbol and model for the LTC2952. 11/01/06 The netlist and error log text viewer now supports search(Ctrl-F). 11/01/06 Removed some dead code from the dialog resizing routines. 11/01/06 Added search capability to the netlist viewer. 10/31/06 Extended LVS for use with in-house tools. 10/30/06 Revised the LT3439 model. 10/30/06 Added a symbol and model for the LT3510. 10/26/06 Added some LVS features for use with in-house tools. 10/24/06 Added a Howland current source example in the examples/Educational directory. 10/24/06 Corrected an error parsing .ic statements in hierarchal schematics. 10/24/06 Revised the LTC3824 model. 10/24/06 Added a Wien bridge oscillator example in the examples/Educational directory. 10/24/06 Revised the LTC1871 and LTC1871-7 models. 10/22/06 Corrected an error reporting the freq of peak response in BW integration. 10/22/06 Corrected an inconsistency in complex data interpolation. 10/12/06 Missing bipolar substrate nodes are better accepted in some contexts. 10/11/06 Duplicate model names are now gradually culled from the device databases. 10/09/06 Revised the LTC3217 model. 10/09/06 Added symbols and models for the LTC3210-1, LTC3210-2, and LTC3210-3. 10/09/06 Revised the LTC3210 model. 10/09/06 Improved the look of the Omega character on some XP systems. 10/09/06 Revised the LT1377 model. 10/09/06 Revised the LT1372 model. 10/06/06 The Save and Save As commands now refer to the plot settings when a waveform window is the active window. 10/06/06 Revised the LTC1425 model. 10/06/06 Added a symbol and model for the LTC3210. 10/04/06 Added model test jigs to the base distribution. 10/03/06 Fixed a problem with Shift+Control+Alt+R automatic reannotation regarding hierarchical schematics. 10/02/06 Improved some of the multi-threading code. 10/02/06 Improved the speed of the field sync utility. 10/02/06 Trapped a crash mode in the field sync utility. 09/29/06 Added a symbol and model for the LTC3214. 09/29/06 Added a symbol and model for the LTC3217. 09/29/06 Added a symbol and model for the LTC3035. 09/29/06 Zero-sized files no longer confuse the field sync utility. 09/29/06 Added a symbol and model for the LTC1928-5. 09/29/06 Added symbols and models for the LTC3240-2.5 and LTC3240-3.3. 09/29/06 Added a symbol and model for the LTC3252. 09/29/06 Added a symbol and model for the LTC3216. 09/29/06 The program tries to better handle ill-formed analyses with transient commands that depend on a stepped parameter. 09/29/06 Fixed a problem regarding differentially cross-probing. 09/28/06 Suppressed some superfluous "Ignoring empty pin current..." messages 09/25/06 The Find command can no longer interrupt object spriting. 09/25/06 The right mouse button context menus now do a better job of reporting current keyboard shortcut settings. 09/25/06 There is now a check that the user doesn't specify reference designators containing a space character. 09/25/06 Shift-dragging the mouse on the schematic pans even when moving/dragging/placing/etc. 09/25/06 Control + Shift + mouse wheel now gives very fine control of the zoom of a schematic. 09/25/06 Shift + mouse wheel now gives fine control of the zoom of a schematic. 09/25/06 The mouse wheel now controls the zoom of a schematic. 09/21/06 Fixed a problem with some incremental draw updating done for schematic node labels. 09/21/06 Added a symbol for the LT1679. 09/18/06 Cleanup some aspects of Nyquist plot limit selections. 09/18/06 The "Don't plot..." check boxes were changed to buttons. 09/18/06 The Edit Simulation Command Cancel button was moved to the left of the OK button. 09/12/06 Revised the LTC3728 model. 09/12/06 Revised the LT1616 model. 09/11/06 Added a symbol and model for the LTC3215. 09/11/06 Added a symbol and model for the LT1976B. 09/11/06 Trapped a singularity regarding some .dc sweeps. 09/11/06 Trapped a small memory leak regarding temperature sweeps. 09/11/06 Improved the automatic drawing of phasing dots on coupled inductors. 09/11/06 Added some example band gap circuits to the examples/Educational directory. 09/07/06 Modified the ferritebead_z(i) symbol so that the symbol attributes could be auto-positioned independent of orientation. 09/07/06 Revised the LTC3783 model. 09/07/06 Revised the LT3476 model. 09/06/06 Updates can now be done with the base installation program, swcadiii.exe, if the installer is pointed at the previous installation directory. 09/05/06 A netlist line starting with "*!LTspice: " is now be treated as a SPICE directive for LTspice(but a comment in other SPICE programs). 09/05/06 Adjusted the Newton iteration in semiconductor diode breakdown. 09/05/06 Trapped an internal singularity in the VDMOS device. 09/02/06 Trapped an internal singularity in the level 3 MOSFET. 09/02/06 Trapped an internal singularity in the level 2 MOSFET. 09/01/06 Trapped an internal singularity in the level 1 MOSFET. 08/31/06 Added some ferrite bead models supplied by W�rth Elektronik that model Z(freq, DC current). 08/31/06 Added symbols and models for the LTC3204-3.3, LTC3204-5, LTC3204B-3.3, and LTC3204B-5. 08/31/06 Trapped an internal singularity in some BJT conduction modes. 08/30/06 Trapped an internal singularity in diode recombination current conduction. 08/30/06 Revised the LT1618 model. 08/29/06 Added symbols and models for the LTC3203B, LTC3203B-1, and LTC3203-1. 08/29/06 Fixed a problem cross-probing busses in hierarchical designs using bus pins. 08/29/06 Trapped an internal singularity in diode conduction. 08/28/06 Revised the LT3476 model. 08/28/06 Added some MOSFETs to the database. 08/25/06 Fixed a problem regarding the JFET transistor database server. 08/25/06 Fixed a problem regarding the bipolar transistor database server. 08/25/06 Revised the LT3485 series models. 08/21/06 Revised the LT1308A and LT1308B models. 08/20/06 Adjusted the diode breakdown implementation. 08/18/06 Updated the Wurth Elektronik eiSos Inductors. 08/17/06 Adjusted the netlist as used with in-house tools. 08/17/06 .measure statements placed on schematics referring to pin currents now know the pin names. 08/16/06 Added symbols and models for the LTC1751-3.3, LTC1751-5, and LTC1751. 08/15/06 Added a symbol and model for the LTC3872. 08/14/06 Added a symbol and model for the LTC3561. 08/14/06 Revised the LTM4601, LTM4603, and LTM4603-1 models. 08/14/06 Added a symbol and model for the LTM4601-1. 08/10/06 Revised the LT3466 and LT3466-1 models. 08/09/06 Added a symbol and model for the LTC1697. 08/08/06 Added symbols and models for the LT3478 and LT3478-1. 08/07/06 Added a symbol and model for the LT1158. 08/07/06 Trapped spurious cases of internal errors 69 and 131. 08/04/06 Added a symbol and model for the LT1076-5. 08/04/06 Added symbols and models for the LT1160 and LT1162. 08/04/06 Revised the LTC3418 model. 08/03/06 Revised the LTC4354 model. 08/02/06 Added a symbol and model for the LTC3783. 08/01/06 Added a symbol and model for the LTC3548-2. 08/01/06 Added a symbol and model for the LTC3406B-1.2 08/01/06 Added a symbol for the LTC3707-SYNC. 08/01/06 Revised the LT3487 models. 07/31/06 Adjusted the part name spell checker. 07/31/06 Added a symbol for the LTC3407-4. 07/31/06 Revised the LTM4601 and LTM4603 models. 07/31/06 Added a symbol and model for the LTC3731H. 07/31/06 Added a symbol and model for the LT1534-1. 07/31/06 Added a symbol and model for the LT1949-1. 07/31/06 Added a symbol and model for the LTC3400-1. 07/31/06 Added a symbol and model for the LTC1754-3.3. 07/31/06 Added a symbol and model for the LTC3417A. 07/31/06 Added symbols and models for the LTC1706-61, LTC1706-63, LTC1706-81, LTC1706-82, and LTC1706-85. 07/28/06 Revised the LT3506 and LT3506A models. 07/25/06 Added a symbol and model for the LTC3828. 07/24/06 Revised the LTC3831 model. 07/24/06 Added a symbol and model for the LTC3831-1. 07/21/06 Positive pin-current is often indicated in the the clamp-on ammeter. 07/20/06 The yellow arrows indicating current direction on the clamp-on ammeter were changed to red. 07/20/06 Alt-click on a wire will now plot the current in that wire in most situations. 07/19/06 Revised the LT3485 series of models. 07/19/06 Revised the LT3484 series of models. 07/19/06 Revised the LT3740 model. 07/19/06 The clamp-on ammeter icon now shows the direction of positive current flow sense for resistors, capacitors, inductors, diodes, voltage and current sources. 07/18/06 Revised the LT1994 model. 07/18/06 Added a .ferret command. 07/18/06 Modified the .op solution strategy when using level 1 voltage controlled switches. 07/17/06 Corrected an error in m-factor handling in the VDMOS device. 07/17/06 Modified the .op solution strategy when using level 2 voltage controlled switches. 07/11/06 Modified the .op debugging hooks for internal use. 07/10/06 Added a symbol and model for the LT3740. 07/07/06 Added a symbol and model for the LTC3700. 07/07/06 The cursor is now placed to the end of the editabe text of the symbol browser after a successful spell check. 07/07/06 Pin Label/Netlist Order/Offset edit window focus is now preserved between Pin/Port Property dialog invocations. 07/06/06 Fixed a small memory leak in netlists using nested subcircuit definitions. 07/06/06 Fixed a problem passing parameters to subckt's in netlists using nested subcircuit definitions. 07/06/06 Added a symbol and model for the LTC3824. 07/06/06 Revised the LT3437 model. 07/05/06 Resolved an issue expanding user-defined functions used in behavioral sources. 07/05/06 The program will also check if an .ini file exists when used with the -registry command line option in the interest of finding the last time the installation was sync'ed to the current release. 06/29/06 Added symbols and models for the LTM4602, LTM4603, and LTM4603-1. 06/29/06 Added a symbol and model for the LT3476. 06/29/06 Revised the LT3475 model. 06/29/06 Added a symbol and model for the LT3487. 06/29/06 Added a symbol and model for the LT3750. 06/28/06 Added a symbol and model for the LT3489. 06/26/06 Added symbols and models for the LTC2903-A1, LTC2903-B1, LTC2903-C1, LTC2903-D1, and LTC2903-E1. 06/26/06 Adjusted the netlist generated when being used with in-house tools. 06/23/06 Added a symbol and model for the LT3486. 06/22/06 Added a symbol and model for the LT3475. 06/22/06 Adjusted the regenerative gain of the George A. Philbrick Researches, Inc. P2 All Solid State Differential Operational Amplifier in the examples/Educational directory. 06/21/06 Trapped a crash mode regarding parametric plot attached cursors. 06/21/06 Corrected a problem finding MOSFETs out of the database. 06/20/06 Revised the LT3800 model. 06/17/06 Added common mode equivalent input noise current densities in the universal opamps. This is a noise that increases as the impedance imbalance between opamp inputs. 06/17/06 Adjusted netlist device size scaling for interface with in-house tools. 06/17/06 Corrected a problem regarding the GasFET in the alternate solver. 06/12/06 Corrected an error in the LTC4441-1 symbol. 06/12/06 Added a UniversalOpamp2 symbol and model file based on the new level 2 switch. 06/12/06 Revised the new diode and level 2 switch implementations. 05/12/06 The symbol browswer now spell checks/corrects errors of the form LTnnnn to LTCnnnn or LTMnnnn. 06/09/06 Added symbols and models for the LTC2053, LTC6241, LTC6411, LT6553, and LT6554. 06/09/06 Added symbols and models for the LTC1992, LTC1992-1, LTC1992-2, LTC1992-5, and LTC1992-10. 06/09/06 Added a LTM4601 symbol and model. 06/09/06 Revised the LTC3770 model. 06/09/06 Revised the LT1994 model. 06/08/06 If there's only one data ordinate availible, that is plotted without displaying the Select Visible Waveforms dialog. 06/08/06 Display of the initial Select Visible Waveforms dialog can now be suppressed. 06/08/06 Removed some extraneous .param statements from the expanded listing. 06/08/06 Added ideal diode parameters Ilimit and epsilon. 06/08/06 Revised the LTC3780 model. 06/07/06 Fixed a problem showing MOSFET information when editing. 06/07/06 Delta group delay is now on complex waveform paper printout when both cursors are attached to group delay. 06/07/06 Fixed a problem parsing some initial conditions. 06/05/06 Revised the LTC3525-3, LTC3525-3.3, and LTC3525-5 models. 06/04/06 Added a level 2 voltage controlled switch. 06/01/06 Revised the LT1310 model. 05/31/06 Corrected an error in one of the shorted circuit component compilers. 05/30/06 Corrected and revised the examples\Educational\varactor.asc example. 05/30/06 Removed some unused, undocumented and only partially implemented special function devices. 05/30/06 Added a symbol and model for the LT3491. 05/26/06 Revised the LTC3431 model. 05/26/06 Added a symbol and model for the LT3505. 05/26/06 Added a symbol and model for the LT3506A. 05/26/06 Added a symbol and model for the LT3503. 05/21/06 Reduced the heap requirements of some types of .meas scripts. 05/21/06 Reduced the stack space required for the transformer topology check. 05/12/06 Revised the LTC3770 model. 05/10/06 Added a symbol and model for the LT3501. 05/08/06 Added symbols and models for the LTC4441 and LTC4441-1. 05/08/06 Implemented .option gshunt. 05/08/06 Implemented .option cshuntinternal. 05/05/06 Implemented .option cshunt. 05/04/06 Removed some extraneous line feeds and carriage returns from the plot settings file. 05/03/06 Added symbols and models for the LT3485-0, LT3485-1, LT3485-2, and LT3485- 3. 05/03/06 Minor corrections/updates to the help file. 05/03/06 Fixed a problem parsing archaic .meas syntax for .noise analyses. 05/03/06 Components are now sorted in the order of R1, R2, R10 instead of R1, R10, R2 in BOM's and efficiency reports. 05/02/06 Improved the simulation speed of circuits including extremely short lossy transmission lines. 05/02/06 Improved the simulation speed of circuits including extremely short lossless transmission lines. 05/02/06 Corrected an error identifying some floating nodes. 05/01/06 Fixed a problem in the way the setup simulation dialog parses the command line back into the dialog. 04/27/06 Revised the LT3800 model. 04/27/06 Corrected an error monitoring some MOSFET terminal currents. 04/27/06 Revised the LTC3418 symbol. 04/27/06 Revised the LT1964-5 LT1964-SD and LT1964-SD models. 04/26/06 Added a symbol and model for the LTC4440-5. 04/26/06 Revised the LTC3827 and LTC3827-1 models. 04/26/06 Fixed a problem with the random() function for augments greater than 2147483647. 04/25/06 Added a symbol and model for the LT3493. 04/24/06 Corrected an incompatibility between the normal and alternate solvers' parametric evaluation. 04/13/06 Added a symbol and model for the LTC3705. 04/10/06 Adjusted the schematic search path such that the top level working directory is given priority over local working directories. 04/08/06 The circuit topology check now also inspects the mutual coupling coefficients of all transformer windings to check for non-physical transformer winding topology. 04/07/06 Added more high current inductors to the inductor database. 04/07/06 Added more power MOSFET models to the MOSFET library. 04/07/06 Added symbols and models for the LTC4252A-1 and LTC4252A-2. 04/06/06 Added a symbol and model for the LT3481. 04/05/06 Fixed a problem annotating pin currents from symbols with many long pin names. 04/04/06 Removed some duplicated error messages. 04/03/06 Revised the LT3474 model. 03/30/06 Improved the error message for some curly brace evaluation error conditions. 03/30/06 Added a symbol and model for the LT3466-1. 03/29/06 Added symbols and models for the LTC3458 and LTC3458L. 03/27/06 Revised the LTM4600 symbol. 03/26/06 Revised the LTM4600 model. 03/25/06 Shift+Control+Alt+H will draw hidden symbol attribute text in the highlight color. 03/25/06 Shift+Control+Alt+R will reannotate all reference designators starting at 1 and going up. 03/24/06 Added symbols and models for the LT6100, LT1993-4, LT1993-10, LT1994, LT1789-1, LT1789, LT1009, LT1021-5, LT1021-7, and LT1021-10 03/24/06 Revised the LTC1990 and LTC6101 models. 03/24/06 Resolved an issue some attributes' visibility when interfacing with in- house tools. 03/24/06 Added a symbol and model for the LTC3770. 03/23/06 Revised the LTC3427 model. 03/23/06 Revised the LTC3418 symbol. 03/23/06 Resolved an issue parsing some legacy models. 03/22/06 Adjusted the shorted component circuit matrix optimizer. 03/21/06 Revised the LTM4600 model. 03/21/06 Revised the LTC1778-1, LTC1778, LTC3711, LTC3713, LTC3714, LTC3717-1, LTC3717, LTC3718, LTC3720, and LTC3778 models. 03/20/06 Added a GSD2004W-V diode model. 03/20/06 Revised the models for the LTC3531, LTC3531-3, and LTC3531-3.3. 03/16/06 Added a symbol for the LTC1574HV. 03/16/06 Added a symbol for the LTC3406-1.2. 03/16/06 Added a symbol for the LTC3405A-1.375. 03/16/06 Added a symbol for the LTC4412HV. 03/16/06 Added a symbol for the LT1076HV. 03/16/06 Added a symbol for the LTM4600HV. 03/14/06 Revised the LT1339 model. 03/03/06 Resolved a syntax issue with too many equal signs in .model statements. 03/03/06 Added symbols and models for the LTC3531, LTC3531-3, and LTC3531-3.3. 03/01/06 Added a symbol and model for the LTC3490. 03/01/06 Revised the LT1952 model. 03/01/06 Added a symbol and model for the LTC3417. 03/01/06 Revised the LT1575 symbol. 02/23/06 Revised the LTC4354 model. 02/22/06 Added a symbol and model for the LTC4211. 02/22/06 Added a symbol and model for the LTC4354. 02/22/06 Resolved internal error No. 27. 02/21/06 Added a LTC3444 symbol and model. 02/21/06 Revised the LTC3827 and LTC3827-1 models. 02/16/05 Corrected a global node issue wrt interface to some in-house tools. 02/16/05 Revised the LTC3809-1 model. 02/15/06 Corrected an issue netlisting hierarchical blocks when used with in-house tools. 02/15/06 Revised the LT3437 symbol. 02/15/06 Corrected a problem pointing at non-derived attributes when being used with in-house tools. 02/15/06 Corrected an error counted the number of analysis statements found on a schematic. 02/14/06 Added a LTC3427 symbol and model. 02/14/06 Added LTC3410, LTC3410-1.2, LTC3410-1.65, LTC3410-1.875, LTC3410B, LTC3410-1.2, and LTC3410-1.875 symbols and models. 02/14/06 Revised the models for the LTC3406 series. 02/13/06 Corrected an issue rendering the not bar on highlighted net names. 02/13/06 Added LTC3525-3, LTC3525-3.3 and LTC3525-5 symbols and models. 02/10/06 Revised the LTC2927 model. 02/10/06 Revised the LTC3809-1, LTC3827-1, LTC3827, LTC3736-1, LTC3736-2, LTC3736, and LTC3808 models. 02/09/06 Added a LTC3827-1 symbol and model. 02/08/06 Added a LTC3827 symbol and model. 02/01/06 Revised the LTC3727 model. 01/28/06 Added a LTC3443 symbol and model. 01/28/06 Revised the LTC3440, LTC3441 and LTC3442 models. 01/26/06 Corrected a problem pointing at derived attributes when being used with in-house tools. 01/24/06 Corrected some issues setting manual plot limits. 01/20/06 H- and F- sources can now call V-sources that contain non-zero source resistances. 01/19/06 Revised the LT1935 model. 01/19/06 Fixed a problem forgetting to prompt if schematic changes should be saved when only undo and/or redo was done. 01/19/06 Revised the LT3724 and LT3800 models. 01/16/06 Added a LTC3474 symbol and model. 01/16/06 Revised the LTC3721-1 model. 01/16/06 Added a LTC3803-3 symbol and model. 01/13/06 Added a LTC3428 symbol and model. 01/12/06 Added a LTC3426 symbol and model. 01/11/06 Window focus is now preserved when run in batch mode. 01/11/06 It's now easier to specify the filename extension of files saved in the internal ASCII editor. 01/10/06 Added some .op debugging hooks for internal use. 01/09/06 Trapped a crash mode regarding syntax errors in libraries. 01/06/06 Added a model for a LXHL-BW02 while LED. 01/04/06 Resolved a memory management issue in the unit compiler. 01/03/06 Revised the LTC3413 model. 01/03/06 Revised the LTC3414 model. 01/03/06 Revised the LT1616 model. 01/03/06 Revised the LTC2905 and LTC2907 models. 01/03/06 Fixed a typo in the reporting MOSFET small signal op point data. 01/03/06 Fixed a problem plotting the impulse response of network traces. 01/03/06 Trapped a singular matrix issue regarding setting up A-device output characteristics. 01/03/06 Corrected an error in the help file. 11/11/05 Resolved a difference in default choices made between .noise and .ac analyses. 11/09/05 Trapped a crash mode related to having multiple analysis statements in a netlist. 11/09/05 Implemented a Fowler-Nordheim diode device. 11/08/05 Revised the LT1936 model. 11/07/05 Revised the LT1952 and LT1952-1 models. 11/04/05 The waveform data file's baud rate value now overrides the plot settings file's value. 11/04/05 Added symbols and models for LTC2904, LTC2905, LTC2906, LTC2907, LTC2908- A1, and the LTC2908-B1. 11/04/05 Added a symbol and model for the LTC3822. 11/02/05 Corrected a typo in the help file. 11/01/05 Corrected a problem regarding dimensional analysis in the waveform viewer when using user-defined functions. 10/31/05 Corrected a rare-occurring error in the alternate solver's BSIM charge model. 10/31/05 Corrected a problem in the Monolithic MOSFET editor for some user-created symbols. 10/27/05 Revised the LTC1966, LTC1967, and LTC1968 models. 10/27/05 Integrated power(in Joule) is now reported when dissipation(in Watt) is integrated in the waveform viewer. 10/26/05 Revised the LTC3772 and LTC3772B models wrt sense voltage range. 10/25/05 Revised the LTC3772 and LTC3772B models wrt slope comp. 10/25/05 Trapped a case were bad log() data was plotted outside the plot pane. 10/25/05 Added a symbol and model for the LT3506. 10/24/05 Cached "showall" property of symbol attributes when used with in-house tools. 10/24/05 Removed some obsolete netlist options from the control panel. 10/19/05 Trapped a crash mode regarding complex data plots. 10/18/05 Improved derived attribute selection wrt in-house tool use. 10/18/05 Corrected an error integrating expressions of noise densities. 10/17/05 Added a symbol and model for the LTM4600 �Module. 09/30/05 Added a symbol and model for the LTC3406B-2. 09/29/05 Added a symbol and model for the LTC3809 and LTC3809-1. 09/29/05 Added a symbol and model for the LTC3442. 09/25/05 Added more symbol attributes for in-house application. 09/14/05 Improved .meas statements inappropriately using "at=<value>" syntax. 09/13/05 Improved .meas statements inappropriately using "when <cond1>=<cond2>" syntax. 09/13/05 Corrected a error in labeled units on the attached cursor readout for complex Nyquist plots. 09/12/05 Corrected a problem executing a .meas statement in the last data segment of a simulation. 09/12/05 Revised the random number generator called by rand(), random() and white(). 09/02/05 Added symbols and models for the LTC3801 and LTC3801B models. 09/01/05 Revised LTC4077, LT3800, and LT3724 models. 08/31/05 The complex data viewer can now differentiate re() and im(). 08/31/05 Added a LTC4077 symbol and model. 08/30/05 Revised the VDMOS dc evaluation. 08/22/05 Revised the LTC3780 model. 08/22/05 Resolved a rare-occurring issue regarding library search paths. 08/19/05 Added a LTC2927 symbol and model. 08/19/05 Revised the LTC3772B and LTC3772B models. 08/18/05 Added a LT1910 symbol and model. 08/17/05 Added symbols and models for the LT3484-0, LT3484-1, and LT3484-2. 08/17/05 Added a LTC3409 symbol and model. 08/16/05 Added a LT3479 symbol and model. 08/15/05 Corrected a problem reporting efficiency on schematics containing shorted out components. 08/12/05 Added documentation for .net statements to the help file. 08/12/05 Fixed a problem expanding subcircuits with more than 511 ports. 08/11/05 Fixed a problem which could invoke internal error codes 61 and 123. 08/05/05 Implemented .net [V(out[,ref])|I(Rout)] <Vin|Iin> [Rin=<val>] [Rout=<val>]. 08/04/05 The complex data viewer can now differentiate abs(). 08/04/05 Corrected an error sorting axes by dimension when some data was dimensionless. 08/03/05 Revised the LTC1773 model. 08/03/05 Added symbols and models for the LTC2909-25, LTC2909-33, and LTC2909-50. 08/03/05 Corrected an error in the LPNP device in .ac analysis. 08/03/05 Added a LT4256-1 symbol and model. 08/03/05 Auto deletion can now be set for .fft files. 08/01/05 Improved auto-placement of some symbol attributes. 07/29/05 A disk's root directory can now be saved as the working directory. 07/28/05 Added a LT4256-2 symbol and model. 07/28/05 Revised the LTC1773 model. 07/28/05 Revised the LTC1773 model. 07/27/05 Revised the LTC3780 model. 07/27/05 Added a LTC3548-1 symbol and model. 07/27/05 Added a LTC3548 symbol and model. 07/27/05 Added a LTC3736-2 symbol and model. 07/26/05 Added a LTC3772B symbol and model. 07/26/05 Added a LTC3772 symbol and model. 07/25/05 Corrected a problem cross-probing some types of pin currents. 07/25/05 Added a LTC3780 symbol and model(co-simulation). 07/23/05 Improved the simulation speed of some of the SMPS macromodels with PLL's. 07/23/05 Added a modulate2 device that adds an output in quadrature. 07/20/05 Corrected a problem parsing some node names containing dollar sign characters. 07/19/05 Corrected a problem where plot planes could become unsynchronized even if "Sync. Horiz. Axes" is set. 07/14/05 Corrected a problem monitoring current in some types of sources using Laplace transforms. 07/07/05 The data export utility's file browser can no longer change the current working directory. 07/06/05 Trapped a crash mode when using "steady" with a hierarchical schematic. 07/06/05 Correct a problem in the LT1976, LT1977, LT3434, and LT3435 models. 07/06/05 Correct a problem in the LTC3414, LTC3416, and LTC3418 models. 07/06/05 Fixed a problem running BSIM1 and BSIM2 devices. 07/06/05 Trapped a crash mode regarding empty netlist files. 07/01/05 Improved the simulation speed of the LTC3703 and LTC3703-5 models in boost mode. 07/01/05 Increased the small signal information from a .op for BSIM3. 06/28/05 Revised the sign of reported effective Vth and Vsat for P-chan BSIM3 and BSIM4 in the .log file. 06/28/05 Fixed a problem interfacing with in-house tools. 06/27/05 Added warning messages about sub-subcircuits that fail to resolve. 06/27/05 Corrected a problem expanding nested subcircuits. 06/26/05 Trapped a crash mode relating to missing .ends statements. 06/24/05 Added a symbol and model for the LTC3418. 06/24/05 Trapped a crash mode relating to dangling current sources. 06/24/05 Corrected a error in the LT1931 and LT1931A models. 06/20/05 Corrected a corruption in the help file's table of contents. 06/20/05 Corrected a error in the LT1944 model. 06/20/05 Corrected a error in the LT3800 model. 06/20/05 Corrected a number of typos in the help file. 06/20/05 Corrected a problem building the symbol file list on some installations. 06/20/05 Corrected a problem using behavioral resistances in a subcircuit. 06/20/05 Corrected waveform annotation editing when using other than the system font size. 06/03/05 Removed an extraneous error message when changing complex data plotting representations. 06/02/05 Released a 2nd generation ferromagnetic core implementation. 06/02/05 Deferred processing .noise error messages until the entire deck is read. 05/31/05 Cleaned up some behavior when reopening existing .raw files. 05/27/05 Added a symbol and model for the LT3724. 05/26/05 Added symbols and models for the LT1990, LT1993-2, and LTC6101. 05/26/05 Added symbols and models for the LTC1966, LTC1967, and LTC1968. 05/25/05 Revised the Si4433DY model. 05/25/05 Added a LT1719 symbol. 05/25/05 Improved the operation of .save statements with .op analyses. 05/25/05 Corrected a problem with some subcircuit port current monitoring. 05/20/05 Added a symbol and model for the LT3473A. 05/20/05 Added a symbol and model for the LT3473. 05/20/05 Corrected the Ic rating for the 2N5087. 05/19/05 Trapped a numeric underflow in the diode evaluation. 05/19/05 Improved the ability to find a .meas condition when the condition is met at the end range of complex data. 05/19/05 Removed some extraneous data traces from .noise analyses. 05/18/05 The complex data attached cursor readout no longer labels the ordinate Freq/Hz if a parameter is swept at a single frequency. 05/18/05 Added a symbol and model for the LT3483. 05/18/05 Added a symbol and model for the LT3477. 05/17/05 Added a symbol and model for the LT1952-1. 05/16/05 Corrected an error resolving some nets defined as global. 05/16/05 Corrected a problem selecting some vertical schematic text comments. 05/16/05 Curly braces are no longer allowed in netnames. 05/14/05 Improved the default grid snap selection when moving/dragging combinations of text and graphical annotations. 05/14/05 Corrected a problem selecting some schematic text comments. 05/13/05 Updated the LT1806 symbol. 05/12/05 Waveform integration limits are now precisely over the zoom limits. 05/11/05 Corrected a rare error in the ordinate range of simulation data given to DFFT dialog box. 05/10/05 Updated the LT1074 model. 05/10/05 Updated the LT3471 model. 05/08/05 Corrected a problem with some subcircuit port current monitoring. 05/03/05 Corrected a problem regarding attached cursors and eye diagrams. 04/29/05 Corrected a problem reporting some BSIM currents 04/29/05 Fixed a problem opening some .app files. 04/28/05 Updated the CoilCraft inductor model database. 04/27/05 Fixed a problem remembering default PCB netlist format. 04/27/05 Fixed a problem editing some instance attributes. 04/27/05 Added a LT3800 symbol and model. 04/24/05 Improved the ability to read a greater range of incorrectly formated PCM .wav files. 04/23/05 Fixed a problem relating to working with long path names. 04/22/05 Fixed a problem that made .meas statements results dependent on the order of execution. 04/22/05 Fixed a problem undoing schematic edits of some forms of rotations. 04/21/05 Added the ability for a third party to distribute encrypted libraries for use in LTspice. 04/21/05 Added some flexibility in the period over which .four statements are evaluated. 04/15/05 Corrected a problem preserving mfg information on the BOM. 04/14/05 Drawing a wire to a BUS tap automatically terminates that wire. 04/14/05 Improved a warning about using BUS'ed instances. 04/14/05 Improved the editability of .wmf files in broken .wmf graphical editors. 04/13/05 Corrected an error handling the normalization of the DC component of .step'ed FFT'ed data. 04/13/05 Corrected an error in the LT6011 and LT6012 symbols. 04/08/05 Added a symbol and model for the LTC3808. 04/08/05 Improved the performance of the LT3401 model. 04/06/05 Added a symbol and model for the LT3470. 04/06/05 Corrected an error reporting some types of subcircuit port currents. 04/06/05 Corrected a problem with some .probe/.save combinations. 04/06/05 Implemented the LTC3421 model's shutdown pin. 03/30/05 Added a symbol and model for the LTC3776. 03/29/05 Added a symbol and model for the LTC3736-1. 03/29/05 Added symbols and models for the LT3462 and LT3462A. 03/28/05 "0" is no longer allowed as a pin name. 03/28/05 Made a correction to the LT3781 symbol. 03/27/05 The buffer size used for Fast Access file conversion is now adjustable and defaults to 40% of physical RAM instead of 25%. 03/25/05 Node "GND" is strictly enforced to be "0" in the schematic capture unless it is a port name. "GND" has always been a special synonym for node "0" in the simulator. 03/25/05 Fixed a problem highlighting some nets with the Find utility. 03/25/05 Transient analysis with zero stop time is now reported as an error. 03/24/05 Corrected an error in the normalization of the DC component of FFT'ed waveforms. 03/24/05 Integrated RMS values of expressions are again displayed if they have the units of Amps or Volts. 03/23/05 Updated BSIMSOI to version 3.2. 03/21/05 Fixed a crash mode relating to infinite subcircuit recursion of a PCB exported netlist. 03/21/05 Fixed a crash mode relating to hierarchical navigation. 03/21/05 Corrected an problem computing subcircuit dissipation at any level of the hierarchy. 03/21/05 Corrected an error regarding subcircuit port current monitoring. 03/18/05 The Fast Access conversion dialog box is now resizable. 03/18/05 Corrected an error in the LT1813 model. 03/16/05 Added a user-programmable keyboard short cut for "Select Steps". 03/16/05 Fixed a problem regarding marching waveforms for .step'ed .op analyses. 03/16/05 .save statements can now include wild cards, e.g., .save V(*:x1:*) Id(m*) 03/16/05 Fixed a memory leak affecting .tf analysis. 03/16/05 Added a symbol and model for the LTC3412A. 03/15/05 The Select Saved Waveforms dialog can now be used throughout the hierarchy. 03/15/05 The Select Saved Waveforms dialog is now resizeable. 03/11/05 Hierarchical instance name mangling has changed, e.g., what used to be I(R:1:2:3) is now I(x1:x2:R3). 03/11/05 The program no longer allows you to use names with a ':' in it if you aren't trying to make a bus. 03/11/05 You can now enter a hierarchical block by double clicking on it. 03/10/05 Added a LTC1702A symbol and model. 03/10/05 Corrected a problem reporting some bipolar base currents. 03/09/05 Subcircuit port currents now have haves of the form Ix(Instance:pin) and work at all levels of the hierarchy. 03/09/05 .end statements in .inc'ed files no longer terminate the global deck. 03/09/05 Fixed a problem computing dissipation in some hierarchical blocks. 03/08/05 Fixed the keyboard shortcut background color on XP. 03/08/05 Enabled auto parenthesis completion for derived attributes. 03/08/05 Added symbols and models for the LTC1709-7, LTC1709-8, LTC1709-85, and LTC1709-9. 03/06/05 Adjusted the break point strategy. 03/04/05 Only bus pins on hierarchical or subcircuit blocks are now understood to promote the connected to wire to a bus. 03/04/05 GND is understood as a synonym for 0 in behavioral expressions as it has been elsewhere. 03/04/05 Fixed a problem regarding VeriStop, VeriTimes, Digtial_Timing_Model, and Digtial_File symbol attributes with in-house tools. 03/04/05 Fixed a problem regarding SpiceOrder pin attribute when interfacing with in-house tools. 03/02/05 Released BUS support. 03/02/05 Fixed a problem converting u to � where it wasn't appropriate. 02/28/05 Fixed a problem regarding parametric plotting. 02/27/05 Fixed a problem with the attached cursor readout when the cursor was attached to the last data point of a simulation. 02/26/05 .raw files can now be converted to a Fast Access format that allows new plot traces to be added. 02/26/05 Only the wire grid is used as a candidate for reduced pitch grids when the grid pitch becomes too dense to display on the screen. 02/25/05 Fixed a problem that caused some .meas statement syntax errors to cause the program to hang. 02/25/05 Fixed a problem in the LT1996 model. 02/24/05 Improved the visibility/contrast of sprited objects in the symbol editor against dark backgrounds. 02/24/05 Fixed a problem parsing .meas statements from/to syntax. 02/24/05 Fixed a problem displaying horizontal ticks after manually setting axis limits an a reversed .dc sweep ordinate. 02/24/05 Removed some superfluous parenthesis in .meas statement result formating. 02/24/05 Improved .meas statement error reporting regarding multiply defined .meas result names. 02/23/05 Changed complex data comparison from magnitudes to real parts in .meas statements. 02/23/05 Added an LT1952 symbol and model. 02/23/05 Fixed a simulation speed problem regarding .tran analyses with non-zero "Time to Start Saving Data". 02/22/05 Revised the LTC1778-1, LTC1778, LTC3711, LTC3713, LTC3714, LTC3717-1, LTC3717, LTC3718, LTC3720, and LTC3778 models. 02/17/05 Plotwinsize is automatically reduced so that no more than an amount equal to 25% of physical memory is needed for the waveform data compression buffer. 02/17/05 Corrected the bias shutdown input bias currents of the 1976, 1977, 1976, 3434, 3435, and 3437 models. 02/16/05 Sped-up parsing large(>100K components) netlists. 02/14/05 Updated the LT1618 model. 02/14/05 Improved error reporting regarding missing device nodes. 02/13/05 Sped-up optional deletion of wires jumpering component pins. 02/10/05 Integrated RMS values of expressions are no longer displayed so as not to confuse averages of dissipation expressions. 02/09/05 Corrected a problem doing FFT's on .step'ed datasets. 02/09/05 Corrected a crash mode relating to copying huge blocks of circuitry. 02/09/05 Sped-up wire scrub and netlist generation. 02/08/05 Corrected a problem evaluating user-defined plotting functions that index into .step'ed data. 02/08/05 Blank "simulation results" windows are now suppressed from view. 02/08/05 Implemented BJT Ibc and Ibe parameters. 02/05/05 Sped-up schematic copying of large blocks of duplicated circuitry. 02/04/05 The "Add GMIN across current sources" hack is now also applied to F- sources. 02/04/05 Formulae for non-derivable attributes are no longer shown on the schematic. 02/04/05 Revised the LTC1624 model. 02/04/05 Most circuit elements with all terminals shorted together are now ignored in the simulation. 02/03/05 Corrected a problem with behavioral delays. 02/02/05 Added an LT3782 symbol and model. 02/01/05 Improved the error reporting for error code 53. 01/30/05 The PADS netlist output now contains a version/date comment. 01/29/05 Improved error reporting regarding error codes 74 and 135. 01/29/05 Updated the LT1766, LT1956-5, LT1956, LT1976, LT1977, LT3430, LT3431, LT3434, LT3435, and LT3437 models. 01/29/05 Corrected the accuracy of .meas statements operating over the simulation limits of .step'ed datasets. 01/27/05 Native SwCADIII symbols can now be used with in-house schematics. 01/26/05 MOSFET level 54 is now accepted as a synonym for level 14. 01/26/05 Fixed a problem with error reporting when exporting netlists. 01/21/05 Fixed a crash mode related to using busses with in-house tools. 01/21/05 The UniversalOpamp model's input resistance is now programmable. 01/21/05 The 1pole and 2pole opamp models' input resistance is now programmable. 01/20/05 Added an LT1936 symbol and model. 01/19/05 Improved the speed marching eye diagram waveforms. 01/19/05 Improved the speed of Gear integration. 01/18/05 Added SYNC to the LT1766 symbol and model. 01/17/05 Added an LTC3723-2 symbol and model. 01/14/05 Added an LTC3723-1 symbol and model. 01/14/05 Fixed a problem regarding startup dwarf pulses from LTC3703/-5 models. 01/12/05 Fixed a problem relating to delayed start of data accumulation. 01/12/05 Added an LTC3721-1 symbol and model. 01/11/05 Fixed a problem with SMPS going to 100% duty. 01/08/05 .inc and .lib statements can now include http url's. 01/07/05 Added some entries to the MOSFET database. 01/07/05 Updated the capacitor database with more items from KEMET. 01/07/05 Added an LTC3416 symbol and model. 01/06/05 Added an LT3472 symbol and model. 01/05/05 Fixed a bug evaluating compressed data in .meas ... at= statements. 01/05/05 Fixed a bug in the simulation setup editor when a .tf analysis was present on the schematic. 01/04/05 Corrected a problem finding precise .meas trig, targ, and at times. 01/04/05 Corrected a problem regarding nested subcircuits with cross-scoped invocations. 12/30/04 Improved the ability to point at components with overlapping bounding boxes. 12/29/04 Added symbols and models for the LT1011, LT1015, LT1017, LT1018, LT1711, LT1713, LT1715, LT1716, LT1794, LT1970, LT1991, LT1996, LT6650, LT6700-X, LTC1563- X, LTC1841, LTC1842, LTC1843, LTC6910-X, and LTC6911-X. 12/28/04 Updated the help documentation wrt .measure, numdgt, and measdgt. 12/25/04 Fixed a crash mode related to printed .step'ed integral .meas statements. 12/22/04 Implemented .measure commands. 12/21/04 Added small signal current monitoring to the arbitrary capacitance device. 12/21/04 Corrected an error reporting integrated BW of native data traces. 12/15/04 Corrected a hierarchical netlisting issue with pinless ports. 12/14/04 Corrected an issue interfacing bused hierarchical circuit elements to some in-house tools. 12/09/04 Device shrink is now communicated through the registry to other in-house tools. 12/08/04 Setting .option numdgt >= 6 now writes a .raw file with double precession compression coefficients. 12/08/04 Fixed a problem calling numbered attributes in derived attributes. 12/07/04 Added an LT3437 symbol and model. 12/07/04 Corrected an incompatibility with some older in-house tools. 12/06/04 Corrected the start-up behavior of the LTC3803 and LTC3803-5 models. 12/06/04 Updated the LT1431 model with one using only 3 internal nodes instead of 29. 12/03/04 Fixed a problem using the ternary operator in behavioral sources scoped to a subcircuit. 12/02/04 Added a symbol and model for the LT3471. 12/02/04 Direct connections b/t pins of the same symbol are now allowed whenever interfacing to in-house tools. 12/02/04 Made Boolean comparison syntax for derived attributes the same as used in other in-house tools. 12/02/04 Ignores a larger set of .option statement used in foreign simulators. 12/02/04 A dollar sign is now understood to introduce a mid-line comment in some situations. 12/01/04 Corrected an issue interfacing bused hierarchical circuit blocks to some in-house tools. 12/01/04 Added the option to go to Linear's website for the datasheet from the symbol. 12/01/04 Updated the help documentation. 12/01/04 BSIM4 small signal operating point parameters from a .op are now printed in the log file. 12/01/04 Fixed a problem parsing some cases of 3 terminal VDMOS instances. 11/30/04 Fixed a memory leak regarding MOSFETs. 11/30/04 Improved the auto-ranging algorithm for invariant noise data. 11/30/04 Implemented instance m-factor for BSIM4. 11/30/04 Updated the BSIM4 device from 4.2.1 to 4.4.0. 11/23/04 The simulation setup editor main tab can now be changed with the command line. 11/22/04 The netlist editor is automatically maximized if it's the only open window. 11/20/04 Corrected an error in the EKV charge model. 11/19/04 Added a model and symbol for the LTC3703-5. 11/18/04 Added a model and symbol for the LT1528. 11/18/04 Corrected the line regulation of the new LDO models. 11/16/04 Added a models and symbols for the LT1584/5/7 series. 11/16/04 Added symbols for the LT1963A-series. 11/16/04 Added symbols for the LT1764A-series. 11/15/04 Added a models and symbols of the LT1086, LT1086H, LT1086-2.85, LT1086- 3.3, LT1086-3.6, LT1086-5, and LT1086-12. 11/15/04 Updated the LT1083/4/5 LDO models. 11/15/04 Corrected an error in the 2pole opamp model. 11/15/04 Added topologycheck to the help documentation. 11/12/04 Corrected an error in .dc sweep analyses. 11/11/04 Trapped a numerical overflow condition in diode evaluation. 11/11/04 Added symbols and models for the LTC3429 and LTC3429. 11/11/04 Resolved an issue using LTspice with some other in-house tools. 11/11/04 Added symbols and models for the LT1977 and LT3435. 11/10/04 The value attribute of the opamp2 symbol is now visible by default. 11/10/04 Fixed a crash mode relating to reporting netlist errors. 11/09/04 Added a models and symbols of the LT3463 and LT3463A. 11/09/04 Added a model and symbol of the LT3466. 11/08/04 Corrected another problem reading legacy POLY() sources. 11/08/04 Added symbols and models for the LT1964-SD, LT1964-BYP, and LT1964-5. 11/06/04 Removed an extraneous line of pixels in waveform and schematic screen bitmaps copied to clipboard. 11/05/04 Added an example in the Educational directory using an ideal transformer. 11/05/04 Added a couple examples in the Educational directory using inductive transformers. 11/05/04 Corrected a grammatical issue in the field sync progress dialog. 11/05/04 Increased flexibility in setting the horizontal plot limits of parametric plots. 11/04/04 Improved the display of MOSFET models in the MOSFET editor. 11/04/04 Corrected a problem reading legacy POLY() sources. 11/04/04 Improve error recovery of one of the internal circuit compilers. 11/01/04 Corrected an error in the LT3441 model. 11/01/04 Added symbols and models for the LT3010 and LT3010-5. 11/01/04 Corrected an error in the LT4430 model. 10/29/04 Corrected an error in the LTC1475 and LTC1475 models. 10/29/04 Corrected an error in the LT1619 synthesizer schematic. 10/29/04 Updated the LTC3803-5 model. 10/28/04 Added symbols and models for the LT1529-3.3 and LT1529-5. 10/28/04 Updated the LT1529 LDO model. 10/28/04 Added symbols and models for the LT1521-3, LT1521-3.3 and LT1521-5. 10/28/04 Added a symbol for the LT1521. 10/28/04 Updated the LT1521 LDO model. 10/28/04 Added symbols and models for the LT1129-3.3 and LT1129-5. 10/28/04 Updated the LT1129 LDO model. 10/27/04 Added symbols and models for the LT1121-3.3 and LT1121-5. 10/27/04 Updated the LT1121 LDO model. 10/27/04 Added an LT4430 symbol and model. 10/26/04 Updated the LT1764-series LDO models. 10/26/04 Updated the LT1763-series LDO models. 10/24/04 Reduced the size of the junction when drafting with thick wires. 10/24/04 Improved the universal opamp's open loop output limits when hot-decked. 10/24/04 Fixed another problem reading some formats of PCM .wav files. 10/23/04 Fixed a problem reading some formats of .wav files. 10/21/04 Fixed a problem drawing some of the rats nest in the wrong line width. 10/21/04 The data window tab is now updated when the data file name changes. 10/21/04 Corrected a problem with automatically showing the phasing dot of inductors mentioned in K-statements. 10/19/04 Updated the Insider URL accessed on the Help=>About dialog box. 10/19/04 Increased the flexibility of the syntax of parameters defined with Boolean expressions. 10/14/04 Improved the accuracy of .four statement output. 10/14/04 Corrected an error reading large PWL files. 10/14/04 Corrected an error in the LTC3727 and LTC3728 models. 10/13/04 Updated the LT1762-series models. 10/11/04 Removed the preliminary model flag from all SMPS models. 10/11/04 Clarified the complex data attached cursor readout. 10/11/04 Updated the LT1962-series models. 10/11/04 Added symbols and models for the LT1761-1.5 and LT1761-2.8. 10/11/04 Updated the LT1761-series models. 10/07/04 Updated the LT1963-series models. 10/05/04 Added an LTC3803-5 symbol and model. 10/01/04 Corrected a problem with the keyboard shortcut editor. 09/03/04 The independent source editor is no longer applied to PWL's using advanced features it doesn't understand. 09/02/04 Added an LT3434 model and symbol. 09/02/04 Added a dimmer example using a diac and triac. 09/01/04 Made some corrections to the ferrite bead database. 08/26/04 Improved the ability to follow the XP theme in the keyboard shortcut editor. 08/25/04 Improved the ability to follow the XP theme in the setup simulation editor. 08/24/04 Status bar information regarding xprobing hits is now available during simulation. 08/22/04 Fixed a CPL crash mode. 08/18/04 The waveform data window is automatically closed a little earlier when a .op is performed. 08/17/04 Added an LTC3900 symbol and model. 08/16/04 Corrected relative time resolution in pwl files. 08/12/04 Added an LTl935 symbol and model. 08/10/04 Improved ferrite bead editing. 08/06/04 Added a ferrite bead symbols and database. 08/03/04 Corrected an issue with subcircuit port current monitoring. 08/03/04 Corrected various typos in the help documentation. 08/03/04 Parameter units(of .param statements) in the plot.defs file are now obeyed. 08/02/04 Corrected a crash mode relating to subcircuit port current monitoring. 07/27/04 Corrected an error in the LTC1044 model. 07/26/04 Corrected an error exporting waveform data. 07/22/04 Added an LT1933 symbol and model. 07/22/04 Subcircuit port current monitoring now works then there's an arbitrary number of circuit elements attached to the port. 07/21/04 The check of circuit topology can be skipped with ".options topologycheck=0" 07/20/04 Added an LT3467A symbol and model. 07/20/04 Added an LTC3459 symbol and model. 07/19/04 Corrected the description of the LT1787. 07/12/04 Corrected an error in the 1775 synthesizer. 07/08/04 Corrected a some warnings regarding pbsw. 07/08/04 Corrected a problem parsing some .temp syntax. 07/05/04 int(), round(), floor(), and ceil() are now available for parameterized netlist expressions. 06/23/04 Corrected an error reporting BSIM3 impact ionization current. 06/23/04 Updated some parts of the help file. 06/23/04 The .wav file output absolute path is now correct even when the simulation was opened off the MRU file list. 06/23/04 A .wav file may now contain 65535 channels as indicated in the help documentation. 06/16/04 Revised the LT1339 error amp's response. 06/12/04 A better name is suggested for .wmf file of a schematic out of the synthesizer. 06/11/04 Removed a duplicate menu command. 06/11/04 A BOM pasted on the clipboard now includes carriage returns. 06/11/04 Corrected some problems drawing efficiency reports in .wmf files. 06/09/04 Corrected a problem scrolling very large netlists in the editor. 06/09/04 Corrected a problem evaluating deck parameters of very large netlists. 05/24/04 Corrected an error in the LT1301 model. 05/24/04 Improved the plotting performance for some complex plot cases. 05/24/04 Added a symbol and model for the LT3433. 05/24/04 When a symbol can not be found, an attempt is made to re-resolve the path. 05/21/04 Added symbols and models for the LT1457, LT1672, LT1673, LT1674, LT1678, LT1784, LT1803, LT1804, LT1805, LT1815, LT1816, LT1817, LT1818, LT1819, LT6010, LT6011, LT6012, LT6013, LT6014, LT6200-10, LT6200-5, LT6200, LT6201, LT6202, LT6203, LT6204, LT6205, LT6206, LT6207, LT6220, LT6221, LT6222, LT6230-10, LT6230, LT6231, LT6232, LT6233-10, LT6233, LT6234, LT6235, LT6550, LT6551, LTC2051, LTC2052, LTC2054, and LTC2055. 05/19/04 Improved the internal timing tolerances of the LTC3440 and LTC3441 models. 05/19/04 Added a symbol and model for the LTC3421. 05/18/04 Corrected a problem accessing PWL files when absolute paths were missing. 05/17/04 Improved a problem regarding parametric plotting. 05/17/04 Corrected an error reporting .op dissipation. 05/13/04 Fixed a parametric plotting issue for stepped datasets. 05/13/04 Improved some attached cursor issues when working with stepped datasets. 05/12/04 Minor help file revisions. 05/11/04 Removed some obsolete options from the control panel. 05/11/04 Unused model cards are now culled from the expanded netlist. 05/10/04 Complex data can now be exported in Cartesian or polar format. 05/10/04 Corrected a problem with the way I/O ports looked when printed. 05/07/04 Improved quiescent current modeling of the LT1934 and LT1934-1. 05/06/04 Fixed a problem parsing notation such as Ic(Q1)@3 in the Add Trace dialog. 05/06/04 The export data dialog was reorganized to allow more space for the filename. 05/04/04 There is now a built-in utility for exporting waveform data to ASCII files. 05/04/04 The cursor step information window now enumerates from 1. 05/04/04 When printing waveforms with active attached cursors, the cursors and their data are now printed at the bottom of the page. 05/03/04 Corrected in error in plotting .stepped/.dc sweeps with more than three dimensions. 05/03/04 Right clicking on an attached cursor now shows which dataset of .stepped data the cursor is attached. 04/30/04 Cleaned up some schematic redraw issues. 04/28/04 Added a symbol and model for the LT3436. 04/28/04 Added tabs to allow switching between windows. 04/28/04 Added symbols and models for the LT3461 and LT3461A. 04/28/04 Improved the behavior of the monolithic MOSFET editor when specifying parameters that don't have named entries in the dialogbox. 04/27/04 Corrected an error reporting the current in sources using look-up tables. 04/26/04 Waveform viewer again accepts plot expressions with if() statements. 04/23/04 Fixed a problem plotting .dc sweep data after a .step run. 04/16/04 Alleviated an internal race condition in the LTC1773 model. 04/16/04 Added a symbol and model for the LTC2923. 04/16/04 Corrected a parsing problem in the alternate solver. 04/14/04 Corrected a problem cross-probing voltage nodes named with certain special characters. 04/14/04 Corrected a problem in the LTC3803 model. 04/13/04 Corrected a potential error in the Schmidt trigger execution. 04/13/04 Updated the help file with documentation on the new non-linear inductors. 04/09/04 Included the two new non-linear inductors in the alternate solver. 04/09/04 Added instance inductor tempco's tc1 and tc2. 04/09/04 Corrected a couple errors in the JFET library. 04/08/04 Improved the hard saturation magnetic core behavior. 04/08/04 Corrected an inconsistency of which model is used when multiply defined. 04/07/04 Inclusion of default semiconductor libraries and models can now be suppressed on the tools=>Control Panel=>Netlist Pane. 04/07/04 Made some of the warnings and error messages more legible. 04/06/04 Corrected a problem the LT1681 and LT3781 models' softstart logic. 04/01/04 Fixed a problem using lookup charge tables in the arbitrary capacitance device. 04/01/04 Fixed a problem resolving some node names called in the arbitrary capacitance device. 03/30/04 Revised the LT1166 model. 03/30/04 Floating point notation is now understood for MOSFET level integer. 03/22/04 Fixed a problem writing .wmf files under Win98 systems. 03/22/04 Units after numbers in behavioral expressions are now ignored as comments. 03/22/04 The sign of diode Ibv is now ignored. 03/22/04 The Print Monochrome setting also makes B&W Windows metafiles. 03/21/04 The font size used for waveform plots is now user selectable. 03/20/04 Added the ability to export a waveform plot to a Windows metafile(.wmf). 03/19/04 Added the ability to export a schematic to a Windows metafile(.wmf). 03/18/04 Improved the sort order of nodelists in the Select Traces dialog. 03/08/04 Revised the LTC3736 model. 03/08/04 Revised the LT1074 model. 03/05/04 Corrected an error reporting JFET terminal current. 03/05/04 Added a symbol and model for the LT1166. 03/04/04 Corrected an error evaluating JFET impact ionization current. 02/25/04 Corrected the softstart logic of the LTC3703 model. 02/25/04 Corrected the Imax trip hysteresis of the LTC3703 model. 02/25/04 Added an LTC4300A-1 symbol and model. 02/25/04 Fixed a crash mode relating to over-writting plot settings files. 02/25/04 Sped-up some string/parsing operations. 02/23/04 Corrected a problem executing some user-defined functions. 02/23/04 NPN parameters C2 and C4 are now interpreted as multipliers of Is if >= 1. 02/20/04 Made eye-diagram plot mode availability less confusing. 02/20/04 Improved editing of plot annotations when the non-default color scheme is used. 02/20/04 Added symbols and models for the LTC3250-1.2 and LTC3250-1.5. 02/19/04 Updated the LTC3703 model's error amp. 02/18/04 Corrected a problem computing relative paths of netlists opened off the MRU list. 02/18/04 Models of different devices types may now have the same name. 02/18/04 Fixed in error in LT1376 SMPS synthesis. 02/18/04 Corrected the displayed units of current noise data and integrated expressions of noise data. 02/18/04 Culled a duplication out of the standard.dio file. 02/18/04 Suppressed a spurious waring in the alternate solver. 02/17/04 Culled some duplications out of the standard.mos file. 02/17/04 Corrected a memory management problem relating to xmission lines. 02/10/04 Added symbols and models for the LT3468, LT3468-1, and LT3468-2. 02/10/04 Added a symbol and model for an LT3420-1. 02/10/04 Added a symbol and model for an LTC3407-2. 02/10/04 Added a symbol and model for an LTC1875. 02/07/04 Fixed a problem evaluating the MESFET saturation region. 02/06/04 Added a symbol and model for an LTC1879. 02/06/04 Schematic files are less sensitive to the CR/LF sequence at the end of each line. 02/04/04 The LTC3703 model now clamps the Run/SS voltage to 4V. 02/04/04 Added a symbol, UniversalOpamp, which accesses various simulation levels verses speed. See the file examples/Educational/UniversalOpamp.asc for details. 02/03/04 The waveform Expression Editor dialog is now resizable. 02/03/04 Corrected a problem in the convolution of history in lossy transmission lines. 02/03/04 The Navigate/Edit Schematic Block dialog is now resizable. 02/02/04 The attribute edit window is now resizable. 01/30/04 Added LTC1565 symbol and model. 01/29/04 Added a spreadsheet-style editor for editing symbol pin netlist order. 01/28/04 Corrected a phase wrap issue on the attached cursor readout. 01/28/04 Added LTC3733/-1 symbols and models. 01/28/04 Decreased the LT3431's model's min on-time from 350ns to 300ns. 01/28/04 Capacitor Cpar=0 is obeyed if specified. 01/28/04 Added an LTC3727-1 symbol. 01/27/04 Improved differential cross probing involving circuit common. 01/27/04 Added an LT1941 symbol and model. 01/23/04 Added an LTC3806 symbol and model. 01/23/04 Reduced the min on-time of the LT1961, LT1765, and LT1767series models. 01/22/04 Corrected the timestep control for independent exp() sources. 01/21/04 Added the ability to annotate waveform plots with graphics and text. 01/15/04 Added some input range checking for controlled switches. 01/15/04 Corrected the units shown on the integrated noise display. 01/15/04 Fixed a current monitoring problem in the alternate solver. 01/14/04 .step list values are now sorted if out of order. 01/13/04 Added a symbol and model for the LTC4440. 01/12/04 Phase is now plotted in a dashed line in monochrome prints of Bode plots. 01/11/04 Improved memory management for some output routines. 01/09/04 Suppressed a warning when using resistors from the database with MFG's and PN's specified. 01/08/04 Line type(solid, dash, dot, etc.) can now be specified for and graphical schematic annotations and symbol graphics. 01/07/04 Fixed a problem in being able to selectively display the inductor phase dot of uncoupled inductors of saved schematics. 01/07/04 Added some capacitors and inductors to the component databases. 01/06/04 The right button context menus for component database editors work again. 01/06/04 Improved error handing when a nonexistent proxy server is stipulated. 01/05/04 Added the ability to add a user name and password(neither remembered) for Internet service for release syncs through a proxy. 01/03/04 Resistor, Capacitor, and Inductor databases are now searchable. 12/31/03 Reduced column header flicker when resizing the R, C, and L database editors. 12/30/03 Improved resizing behavior of the R, C, and L select stock component dialogs. 12/29/03 Corrected a memory leak in the sync release code. 12/29/03 Improved file download status reporting for updating off the web. 12/29/03 Corrected some problems running under Chinese Editions of Windows. 12/24/03 "Ohm" is now replaced with a capital Greek omega in the column headers. 12/23/03 "Ohm" is now replaced with a capital Greek omega in the dialog text. 12/23/03 Component databases are backed-up before merging during a sync release. 12/22/03 Improved the look of the some edit widgets under Linux/WINE. 12/22/03 The 1st line comment of a top-level deck may now be empty. 12/22/03 Subcircuit ports may now contain square braces as long as they don't brace the entire port name. 12/22/03 Improved the operation of the manual plot limit dialogs. 12/18/03 Improved the ability to cross probe a subckt's port current when drafted with a symbol that is an Prefix'ed as an intrinsic SPICE type. 12/17/03 The 4-terminal monolithic MOS dialog can now parse out parameterized values of L, W, etc. that are single quoted. 12/17/03 "Ohm" is now replaced with a capital Greek omega in the manual plot limit dialogs. 12/16/03 Corrected a problem with the vertical line spacing of the netlist and error log views on Win98. 12/12/03 "Ohm" is now replaced with a capital Greek omega on the attached cursor readout windows. 12/11/03 Added symbols and models for the LT6600-2.5, LT6600-10, and LT6600-20. 12/11/03 "Ohm" is now replaced with a capital Greek omega on the status bar(except on Linux systems). 12/10/03 Popup context menus now have command prompts on the status bar. 12/09/03 "Ohm" is now replaced with a capital Greek omega on unit axis labels(except on Linux systems). 12/08/03 Corrected a crash mode relating to unwrapping phase of complex data cursor readouts. 12/08/03 The ratio between the two attached cursor values is now uniformly displayed for complex data independent of the plotting representation. 12/07/03 Corrected a problem handling empty waveform expressions. 12/07/03 Corrected an error reading out the last datapoint of an complex dataset with an attached cursor. 12/04/03 .tf impedances can now be used in waveform expressions. 12/03/03 Improved the TAB order of the simulation command editor. 12/02/03 Constants used in expressions of waveforms may now contain units. 12/02/03 Added the ability to have more than two vertical plot axes for real data sets. 12/01/03 Added a compiler to analyze the units of expressions of waveforms. 11/25/03 Parameter names may now start with leading underscores. 11/19/03 An attempt is made to better orient flags directly connected to pins. 11/19/03 DC .op solution power dissipation is now visible on the status bar. 11/18/03 The LTC3717 model's Run/SS pin now clamps to 6V. 11/18/03 Added some power MOSFET models. 11/18/03 Dragging a flag off a direct pin connection will now start a rubber-banded wire b/t the flag and pin. 11/18/03 Instantaneous power dissipation is automatically calculated from exiting voltage and current waveforms and plotted as a new trace when Alt-left clicking a symbol. 11/17/03 Improved annotation of subcircuit port currents with symbol pin names. 11/17/03 Improved netlist-level error reporting of R's and C's missing values. 11/14/03 Fixed problem printing waveforms to Adobe Acrobat Distiller(TM). 11/13/03 Fixed a breakpoint handling problem. 11/13/03 The select step dialog can be sorted by clicking on the column header. 11/13/03 Corrected an error plotting expressions of complex data in Cartesian representation. 11/12/03 There's now a dialog that allows specific runs of .step'ed datasets to be displayed. 11/11/03 Employed an alternate method of finding the default e-mail program. 11/07/03 If a datafile is opened up with no other windows open, it fills the application's window. 11/06/03 Made programming rail limits of the universal 2pole opamp model more straightforward. 11/04/03 Corrected an error in the LT1074, LT1076, LT1106, LTC1516, LTC3718, LTC3440, and LTC3441 models. 11/04/03 Corrected an error in the LTC3401 and LTC3402 models. 11/04/03 The attached cursors work again with Cartesian representation of complex data. 11/04/03 Improved color/dash-line scheme used in complex data plots. 11/03/03 Auto deletion of .log and .raw files now apply to netlists as well as schematics. 11/03/03 The .log file of a simulation can now be optionally deleted or not by default when closing the schematic. 11/03/03 The reset defaults on the drafting option pane of the control panel now correctly clears thick pen style. 11/03/03 The additional PWL point dialog box is now resizable. 11/03/03 Corrected a problem with using VDMOS in the alternate solver. 11/03/03 Mfg, Vds, Ron, and Qg are now ignored parameters for all MOS as they are for VDMOS. 11/03/03 Resistor tolerances are now displayed on the BOM. 10/30/03 It's now possible to define keyboard shortcuts for drawing lines, rectangles, circles, and arcs on schematics. 10/30/03 Schematic graphics now snap to a 4x coarser grid unless the control key is held down. 10/30/03 Corrected a problem in the LT1934/-1 model. 10/26/03 Added an "Up One Level" button to the select component dialog. 10/26/03 Rearranged the select component dialog so that there's more space for the path. 10/17/03 The keyword "REPEAT" is now accepted in a .savebias statement. 10/17/03 The font selected for netlists is now preserved between program invocations. 10/16/03 Added initial support for .savebias/.loadbias statements. 10/16/03 .ic and .nodeset statements may now refer to device internal nodes. 10/15/03 Fixed a string memory management problem relating to reporting missing MOS models. 10/14/03 The nag dialog about updating no longer recommends trying to sync your release over the web when running under Linux. 10/13/03 Units of Nyquist plots can now be turned off. 10/13/03 Propagated the new Laplace convoluter to the alternate solver. 10/13/03 The horizontal axis of Nyquist plots can now be manually set well beyond the extent of data. 10/08/03 Fixed a problem with attached dataset cursor wrap when navigating with keyboard cursor keys. 10/09/03 An error is now issued if a mutual inductance between the same two inductors is specified twice. 10/07/03 Corrected an error with the LTC3413 model's ability to sink current. 10/06/03 Added an LT1568 model and symbol. 10/06/03 Added the LTC3803 quiescent current to the model. 10/06/03 Fixed a crash mode relating to the selecting visible traces. 10/06/03 Changed the conversion of Laplace to time domain behavior to a slower, more accurate method. 10/02/03 Diode grading coefficient, m, is no longer limited to .9. 09/23/03 Saved schematics with no symbols no longer cause an error message when read back. 09/22/03 Corrected a floating node message on the 1778 series of models. 09/20/03 .options plotwinsize=0 now defeats all compression. 09/19/03 Corrected an error in the LTC3407 model. 09/18/03 Corrected the LTC3732 error amp's Avol. 09/16/03 Corrected the way resistance TCE is used to compute resistance over temperature. 09/16/03 Corrected a possible infinite loop when integrating waveform data. 09/15/03 Trapped a crash mode cased by opening a symbol incorrectly saved as a schematic. 09/15/03 Sped up evaluation of some forms of Laplacian transfer functions. 09/15/03 Corrected a problem specifying mtol, nfft, and window for Laplace E- and G- sources. 09/15/03 Corrected a error regarding netlisting IC schematics with a shrink factor. 09/11/03 Made a small correction to the LTC1772/B reference voltage. 09/11/03 The instance attribute box automatically focuses on the drop list of available models when possible. 09/11/03 Sped up parsing text pasted as comments or SPICE directives on the schematics. 09/11/03 Added an initial LT3469 symbol and model. 09/10/03 Added an initial LTC3703 symbol and model. 09/10/03 Fixed a problem evaluating some recombination currents. 09/10/03 Fixed a crash mode relating to plots with so many traces displayed the labels weren't drawn. 09/09/03 Fixed a problem evaluating diodes with small Is and large N. 09/03/03 Added an initial LTC3441 symbol and model. 09/03/03 Corrected a pin name on the LT1976. 09/03/03 It's now possible to set data compression loss controls in with .options. 08/29/03 Fixed a crash mode relating to reporting subcircuit expansion errors. 08/29/03 Fixed a problem parsing some arbitrary resistor syntax. 08/29/03 Fixed a hierarchy navigation problem. 08/29/03 Multiple unary minus and unary plus operations can be used in combination in expressions. 08/29/03 VDMOS small signal operating point parameters from a .op are now printed in the log file. 08/28/03 Sped up subcircuit expansion. 08/28/03 Updated the help file. 08/27/03 Removed a restriction to how subcircuits are defined so that port currents may be crossprobed. 08/27/03 The horizontal data axis is now drawn under an empty pane if needed by the pane above it. 08/26/03 Fixed a problem ignoring elements at global scope in .lib'ed files in .step'ed analyses. 08/26/03 Fixed a crash mode regarding placing symbols with no pins. 08/25/03 Fixed a crash mode due to node names that could break the hash table algorithm. 08/25/03 Fixed a windows Me crash mode. 08/22/03 3K4 can now be optionally understood as 3.4K for component values. 08/22/03 Improved optional warning reportings of derived attributes. 08/22/03 Corrected an error in the LTC3832 model. 08/21/03 Corrected an error regarding opening files from the MRU list as the wrong type of document. 08/21/03 Fixed a problem parsing some subcircuit invocation port names used in legacy netlists. 08/21/03 Removed a BJT discontinuity. 08/20/03 Improved error reporting for unknown symbol instance attributes. 08/19/03 Improved error handling of the plots.def file. 08/19/03 It's no longer possible to lock-up the program by trying to start a simulation while one is running with the keyboard shortcut. 08/18/03 Diode Ikf is no longer ignored if Isr is zero. 08/18/03 Differential cross probing now lets you fix the location of the black(reference) probe. 08/18/03 Fixed a problem with the bar line drawn over center justified text. 08/14/03 The symbol editor now allows you to zoom in. 08/13/03 Improved some error messages in the waveform expression compilers. 08/13/03 Updated some sections of the help documentation. 08/13/03 The Boolean XOR operator, ^ is understood to mean exponentiation, **, in expressions of complex expressions. 08/12/03 Corrected the behavior of the resizable dialogs when display properties are not set to show window contents while dragging. 08/11/03 Added LT3465 and LT3465A models and symbols. 08/11/03 An error message is now issued if the .fft file can't be written. 08/11/03 The full path of .fft files is now always computed. 08/08/03 Improved the behavior of the .save dialogbox feature. 08/08/03 Pin name annotation is now done before loading the default .plt file. 08/07/03 Revised the help documentation. 08/06/03 Fixed a problem running the LT1735 model. 08/06/03 It's no longer possible to have two copies of a netlist open at the same time in the same LTspice invocation. 08/05/03 When printing under Wine, circles are now draws as 32 straight lines instead of a smooth arc. 08/04/03 abs() can again be used in waveform expressions. 08/04/03 Adjusted the bias current of the Vrng pin of the LTC1788 family. 08/04/03 Improved PULSE timestep control for PULSE functions with zero on/off times. 08/04/03 The there's a larger color distintion between the greyed out xprobe crossor and the black one. 08/01/03 Implemented differential cross probing. (Drag the mouse between two wires of a schematic vs. clicking on one wire.) 08/01/03 Fixed a problem probing subcircuit port current when it was drafted with an intrinsic device symbol. 08/01/03 The Select Visible Waveforms dialog will now timeout after 5min. instead of holding up a .tran simulation indefinitely. 07/31/03 User defined parameters and functions in the plot.defs file are no longer sensitive to the case of the first character. 07/28/03 Corrected the average current limit threshold of the LT1680. 07/28/03 Added an LTC3717-1 symbol and model. 07/28/03 Corrected an error in the LTC1778/-1, LTC3711, LTC3713, LTC3714 and LTC3720 models. 07/27/03 The .net files can be optionally not deleted(See Tools=>Control Panel=>Operation 07/26/03 Fixed a problem parsing some forms of behavioral POLY() statements. 07/25/03 The keyboard shortcut editor now prevents selections for standard ASCII keys as keyboard shortcuts for the netlist editor. 07/23/03 Added the ability to export a netlist for PCB layout(Formats: Accel, Algorex, Allegro, Applicon Bravo, Applicon Leap, Cadnetix, Calay, Calay90, CBDS, Computervision, EE Designer, ExpressPCB, Intergraph, Mentor, Multiwire, PADS, Scicards, Tango, Telesis, Vectron, and Wire List) 07/23/03 Improved the rotate/mirror behavior when placing pins and text on symbols. 07/23/03 There are now programmable hotkeys for (re-)loading plot settings files. 07/23/03 Corrected a problem expanding the arbitrary behavioral resistor out of subcircuits. 07/22/03 The schematic text dialog box is now resizable. 07/22/03 Added an LT3467 symbol and model. 07/22/03 Added an LT1976 symbol and model. 07/22/03 An error in the LTC3832/-1 reference voltage was corrected. 07/19/03 A problem doubly defining a parameter both with a .step param statement and a .param statement has been resolved. 07/18/03 If there exists a .plt file for a .raw file, that is now used for the initial settings. 07/18/03 Corrected an error in the LT1766 template schematic. 07/15/03 Corrected an error in reading log plot settings. 07/15/03 Implemented user-defined functions and parameters for dataplots(Plot Settings->Edit Plot Defs File). 07/09/03 Made a correction to the LTC3727 model. 07/07/03 "i" can now be used for sqrt(-1) in the complex waveform expression compiler. 07/07/03 Fixed a crash mode regarding marching waveforms of expressions of constants. 07/07/03 Radian measure is now an option for waveform expressions. 07/07/03 Complex waveform expressions are now compiled and then executed instead of interpreted. 07/03/03 Real waveform expressions are now compiled and then executed instead of interpreted. 07/03/03 Fixed an issue regarding evaluating .step'ed parameters that were also specified. 07/03/03 Fixed a problem plotting expressions of data in eye diagram plots for non-.step'ed data sets. 06/30/03 int(), floor(), ceil() can now be used in real waveform expressions. 06/27/03 Corrected an error in the LTC3803 model. 06/27/03 User defined keyboard shortcuts are no longer lost after a batch mode run. 06/25/03 Corrected a few problems relating to messages from the alternate solver. 06/25/03 Corrected an error regarding .step commands of parameters used in subcircuts. 06/24/03 Corrected an error regarding gates with asymmetric rise and fall times. 06/24/03 Improved some exception handling. 06/23/03 Corrected a plotting artifact regarding marking data points with large dots. 06/20/03 Corrected an error in the LTC3406-x.x and LTC3406B-x.x models. 06/18/03 ".dc param ..." statements are now treated as ".step param ..." with a .op directive. 06/18/03 Fixed a problem capturing some of the menu in the screen bitmap under Windows XP. 06/18/03 Anded an LT3731 symbol and model. 06/18/03 Anded an LT3431 symbol and model. 06/18/03 Anded an LT1950 symbol and model. 06/18/03 The disk full error message now states how many bytes were requested in the write that failed. 06/17/03 Corrected an error in the LTC3832 and LTC382-1 models. 06/17/03 Corrected an error in the LTC3729, LTC1929, LTC1629-PG, and LTC1629-6 models. 06/17/03 Corrected an error in the LTC1929 and LTC1929-PG models. 06/07/03 Corrected a problem finding the DC solution to the LT1372 and LT1377 models. 06/16/03 A crash mode relating to diode rating issues was fixed. 06/16/03 A screen refresh issue with placing vertical pins a symbol was corrected. 06/13/03 There are now two SPICE solvers available. An alternate solver uses a slower but more accurate sparse matrix package. 06/12/03 The ESR of some Sumida inductors was corrected. 06/12/03 Corrected an error in the text search utility of netlists. 06/11/03 Corrected an error in the computation of MOS3 Jacobian. 06/11/03 Specified ibv for all zener models. 05/23/03 Corrected the sign of the AC current reported from behavioral current sources. 05/23/03 Corrected an error in the LTC3803 model. 05/21/03 Fixed an error in PWL breakpoint handling. 05/21/03 Replaced/updated sections of the sparse matrix solver. 05/19/03 Improved the source stepping DC solve method. 05/19/03 Adjusted the DC solve strategy. 05/19/03 Fixed a problem regarding some PULSE independent sources. 05/16/03 Corrected in error in the algorithm that detects loops for voltage sources. 05/15/03 Added an LTC3414 symbol and model. 05/15/03 Corrected the LTC3412 model. 05/14/03 The circuit is now checked for potentially floating nodes and reported as warnings in the log file. 05/13/03 Singular matrix errors due to loops of voltage sources and/or inductances are now trapped and reported by device name. 05/13/03 MFC controls were updated to use heap sorts of in-place data. 05/13/03 All quick sorts were replaced with heap sorts. 05/12/03 Corrected a memory management problem relating to copying nets. 05/09/03 Corrected a problem reading back some pathnames contained as text on a schematic. 05/08/03 Corrected a problem evaluating diode recombination current. 05/07/03 Fixed a potential crash mode when switching complex data representation from Bode to Nyquist. 05/07/03 Corrected the quiescent current of the LT1949 model. 05/06/03 Corrected the minimum run voltage of the LT3430 model. 05/05/03 Complex data can now be plotted in rectangular coordinates(Cartesian) instead of polar(Bode/Nyquist). 05/04/03 Fixed a crash mode regarding frequency domain lookup tables. 05/02/03 Added a symbol and model for the LT3460. 05/01/03 Added a symbol and model for the LTC3736. 04/30/03 Added a symbol and model for the LTC3803. 04/22/03 Corrected a problem cross probing some nodes deep in a hierarchy. 04/22/03 It does a better job finding the default e-mail program from the Help- >About dialog 04/22/03 Corrected the peak current of the LTC1707 model. 04/21/03 Save As for schematics will now prompt before overwriting when it automatically supplied the filename extension and that file now exists. 04/21/03 Enabled printing of symbol files. 04/21/03 Fixed a problem crossprobing certain device currents at low hierarchical levels. 04/21/03 Fixed a crash mode relating to pasting between schematics on Windows Me. 04/15/03 The waveform grid is now hardwired to grey when monochrome printing is selected. 04/15/03 A re-read of the disk is no longer required when restarting marching waveforms by zooming extents after zooming in to pause marching waveforms. 04/14/03 An potential error netlisting unloaded blocks of a hierarchical schematic is corrected. 04/13/03 Delta-Y is now read out even when the mouse is outside the plotting area. 04/12/03 Increased the margins when printing netlists. 04/11/03 Made some adjustments to the DC solution strategy. 04/11/03 Added LTC3423 and LTC3424 models and symbols. 04/10/03 The 1pole and 2pole universal opamp macromodels now default to an Avol of 1e6. 04/10/03 Extended the DC solve strategy to wander two dimensional gain/gmin-step and gain/source-step planes. 04/08/03 Adjusted the LT1374 switching losses. 04/08/03 Added an LTC3407 symbol and model. 04/08/03 Warning messages are now generated if a hierarchical block has unused ports. 04/08/03 Error messages are now generated if a hierarchical block has shorted ports. 04/07/03 Now it's possible to pause a simulation, zoom in on the waveform, and then restart the simulation without having to reload data. 04/07/03 The status bar prompt for rotating/mirroring selections is now updated with the hotkey map. 04/07/03 Added an LTC3201 symbol and model. 04/07/03 Fixed a status bar message when reloading traces from the .raw file. 04/05/03 Fixed an error in attached cursor readout when the cursor hops from one trace to other during crossprobing. 04/05/03 Improved error reporting regarding resistors without set values. 04/04/03 Added an LT3464 model and symbol. 04/03/03 A font is specified now when printing waveform data to work around a problem with some hp network printer drivers. 04/03/03 Added an LTC3403 model and symbol. 04/02/03 Fixed a crash mode relating to odd characters in netnames. 04/02/03 Fixed a crash mode relating to changing the text justification of empty component attributes. 04/02/03 Autoscaling of newly created schematics is now less "aggressive". 03/31/03 The old waveform file and plot settings aren't deleted if the new simulation doesn't parse correctly. 03/31/03 Fixed a crash mode relating to inserting new netnames. 03/30/03 Improved the new non-autoranging mode. 03/29/03 Improved memory management relating to incremental netlisting of schematics of the schematic undo/redo data. 03/28/03 Corrected same of the SMPS synthesizer template circuits. 03/28/03 Corrected the LT1425 symbol. 03/28/03 The reference voltages of the LTC3404/5/6 series models were tweaked. 03/28/03 Printing of a zoomed section of a schematic was improved. 03/27/03 Fixed a problem redoing parametric plots. 03/27/03 Waveform plot settings can now be written to/from files. 03/27/03 Waveform data files are now added to the MRU list if they are opened by hand through the File=>Open menu. 03/27/03 An attached cursor crash mode was fixed. 03/26/03 A problem in the LTC3251 model was corrected. 03/26/03 A problem in the LTC1922-1 model was corrected. 03/25/03 A neon bulb macro model and symbol were added. 03/25/03 A new symbol attribute, ModelFile, causes that file to be included as a library when that is used. 03/25/03 A spurious error message about zero valued resistance is removed with when using an expression for the resistance. 03/24/03 Added parameterizable sub opamps 1pole.sub/asy and 2pole.sub/asy. 03/24/03 Implemented internal current limit to the voltage controlled switch device. 03/22/03 Fixed a crash mode that could happen if OK was repeatedly accepted to accepting the default MOS model when it couldn't be found. 03/22/03 Fixed an error parsing relative offsets in PWL's. 03/21/03 Schematic waveform probing can again be restarted after closing and reopening the schematic. 03/21/03 Fixed a problem finding the bin for binned MOSFET model libraries. 03/21/03 Fixed some problems with the text search dialog for netlists. 03/20/03 Efficiency reports and BOM's con now be pasted onto the text clipboard. 03/20/03 Fixed a race condition in the 1944 and 1945 series. 03/20/03 Data files can now be optionally automatically deleted when you close the schematic. 03/19/03 Implemented jssw for MOS level 1, 2, and 3. 03/19/03 A diode's gmin leakage is no longer scaled by the area. 03/19/03 Fixed a problem regarding Cgd for non-symmetrical JFET's. 03/19/03 Fixed a problem with the keyboard short cuts from interfering with windows keyboard menu navigation with the Alt-key. 03/18/03 Fixed a problem with the .op solution of some behavioral voltage sources. 03/17/03 File type is automatically set to binary when steady state is requested without the nodiscard option. 03/14/03 Fixed a problem plotting an expression using a JFET gate current. 03/13/03 Fixed a problem updating the screen during symbol editing. 03/11/03 Keyboard short cuts are now user definable. 03/11/03 Fixed a problem parsing nodes in decks converted from Spectre. 03/11/03 Fixed a problem in the zoom extents of waveform data of stepped data. 03/10/03 Fixed a crash mode relating to reporting missing subcircuits. 03/05/03 Included the LTC3400 model and symbol in the distribution. 03/04/03 Fixed a problem handling with .global statements. 03/04/03 Improved handling of .wave statement syntax errors. 03/04/03 F6 key now works for duplicate mode under Linux/WINE. 03/03/03 The Laplace routines now use more data points in their conversion from frequency domain to time domain. 03/03/03 .ic statements on lower-level schematics are now included in the netlist. 03/03/03 Pointed the help system for Linux/WINE to http://LTspice.linear- tech.com/software/scad3.pdf. 02/28/03 Fixed a crash mode when typing Ctrl-C when running under Linux/Wine. 02/28/03 Added a clamp to the Run/SS pins for the LTC1778 and LTC1778-1 02/28/03 Fixed the some Find dialog problems when running under Linux/Wine. 02/28/03 Improved the look of the icons on the Control Panel tabs when running under Linux/Wine. 02/26/03 Fixed a potential problem compiling user-defined functions used in behavioral sources. 02/26/03 Improved the program's behavior when run under Linux with WINE. 02/26/03 Added an LT1698 model and symbol. 02/26/03 Corrected the 1930/A's model max duty cycle. 02/26/03 Added models and symbols of the LTC3832 and LTC3832-1. 02/23/03 Trapped shorted voltage source errors from crashing memory management. 02/24/03 Added LT1681 and LT3781 models and symbols. 02/21/03 Improved a couple issues drawing with sprited objects. 02/20/03 Added a symbol and model for an LTC1629-6. 02/20/03 An empty component attribute value will now override a non-empty symbol attribute. 02/19/03 Fixed a problem with the simulation setup editor replacing one command of a multi-line block of text. 02/18/03 Added links to Linear's website on the help=>about box. 02/15/03 Fixed a problem relating to nested subcircuit definitions. 02/14/03 Fixed a problem with switching modes of the LTC3440 model during simulation. 02/14/03 Added initial support of <cond> ? <result if cond true> : <result if cond false> syntax. 02/13/03 Fixed a problem relating to nested subcircuit definitions. 02/13/03 Fixed a crash mode when reporting errors in nested user-defined functions. 02/12/03 Fixed a problem pointing at multi-line text blocks on the schematic introduced with the Chinese windows fixes. 02/12/03 Improved error reporting for infinite subcircuit recursion. 02/12/03 Allowed subcircuit definitions to be nested. 02/12/03 Removed an extraneous diagnostic message box when creating a new symbol. 02/12/03 Allowed the Greek Mu symbol to be displayed on the status bar on Chinese editions of windows. 02/11/03 Allowed the Greek Mu symbol to be displayed in the list controls in Chinese editions of windows. 02/10/03 A .step command with only one data point is now flagged as an error. 02/10/03 Fixed a potential crash mode when editing component values. 02/10/03 Allowed the Greek Mu symbol to be displayed on the waveform and schematic on Chinese editions of windows. 02/07/03 Corrected the voltage rating of some of the templates used in the synthesizer. 02/04/03 Fixed a problem parsing the files from "PWL FILE" syntax. 02/04/03 Fixed a problem in the LTC1628-SYNC, LTC3727, LTC3728, and LTC3732 models. 02/04/03 It's easier to delete traces with the delete key during marching waveform updates. 02/04/03 Restarting marching waveforms no longer changes trace color settings. 02/04/03 Corrected the LT3439 model to include current limit. 02/02/03 Fixed a problem pointing at multi-line blocks of text on the schematic. 02/02/03 Fixed a problem scaling BSIM3 transistors for .AC analyses. 01/31/03 Improved the look of some dialogs when running under Chinese editions of Windows. 01/31/03 It's possible to convert all instances of '�' to 'u' on the screen for window systems that don't have fonts that allow a Greek Mu to be displayed. 01/31/03 The obsolete File=>SPICE Netlist=>Extract Subckt command has been removed from the menu. 01/27/03 The net right button menu can now be used to reach the place netname command. 01/27/03 Schematics missing symbols can be opened and resaved to omit the missing symbols. 01/27/03 The description attribute of symbols can now be edited in the symbol editor. 01/26/03 Cross-probing noise contributions now works throughout the hierarchy. 01/25/03 The EuropeanResistor symbol was made narrower. 01/24/03 Fixed a problem evaluating PWL(repeat for .. endrepeat) syntax. 01/23/03 Auto panning the schematic is defeated while returning the mouse to the schematic after using the toolbar. 01/23/03 Improved the branch selection of the complex sqrt() function. 01/23/03 The LT1512 model Ifb reference was corrected to be 100mV instead of 120mV. 01/22/03 The bitmap seen while editing a symbol can now be copied to the windows clipboard. 01/22/03 Corrected an error in the lossy T-Line symbol. 01/21/03 rand() and random() are now available in parameter expressions. 01/20/03 Memory management under Windows 98 was improved. 01/19/03 The spinner controls on the symbol editor work again. 01/18/03 Fixed a problem the the EKV MOSFET implementation in LTspice. 01/17/03 The help system was updated. 01/17/03 Schematic text can now be rotated to be vertical. 01/17/03 Hierarchical schematics are now supported. 01/17/03 A graphical symbol editor was introduced. 01/08/03 LBin and LBout pins of the LTC1174 series were added. 01/08/03 Fixed a problem with pin current monitoring 11/22/02 Corrected an error in the LT1510 model. 11/22/02 Corrected PWL parsing problem that used to preclude assigning a series resistance to PWL voltage sources. 11/21/02 Corrected some more problems relating to discontinuous mode in the LTC1778-1, LTC1778, LTC3711, LTC3713, LTC3714, LTC3720, and LTC3778 models. 11/21/02 Corrected an error in the LT1615/-1 models. 11/19/02 Added a generic varistor symbol. 11/19/02 Added a generic TRIAC symbol. 11/19/02 Corrected an error in the LT1176 model. 11/17/02 Sped up user defined function compiling. 11/14/02 Clicking on the e-mail address in the about box now launches your e-mail program. 11/14/02 Trapped a potential endless loop in waveform average and rms calculations. 11/13/02 Added a generic DIAC symbol. 11/13/02 Lossy transmission line ports may now be cross probed for current. 11/13/02 Lossless transmission line ports may now be cross probed for current. 11/12/02 The equal sign is no longer required in .option statements. 11/12/02 Unrecognized MOS levels now longer abort a simulation if an instance of them is not invoked. 11/11/02 Added an LTC1871-7 model and symbol. 11/11/02 A error is issued if excess phase of a BJT model is specified as negative for a .tran analysis. 11/08/02 Corrected a problem in the LT1302 model. 11/07/02 DW is now a synonym for WD in a level 2 MOSFET. 11/05/02 Corrected the LTC3707 symbol. 10/29/02 Implemented a .global directive. 10/29/02 Added the ability to open a symbol or schematic from a symbol instance on a schematic. 10/28/02 Fixed a memory leak relating to parsing .nodeset statements. 10/25/02 Corrected discontinuous mode in the LTC1778-1, LTC1778, LTC3711, LTC3713, LTC3714, LTC3720, and LTC3778 models. 10/24/02 Corrected an issue of false convergence about diode breakdown voltage. 10/21/02 Updated the LTC4412 model. 10/21/02 Corrected the LT1268B synthesizer template schematic. 10/18/02 Corrected the error amp model for the LT1377. 10/17/02 Corrected the oscillator and cross conduction logic of the LT3439 model. 10/17/02 Corrected the minimum off time of the LTC1778-1, LTC1778, LTC3711, LTC3713, LTC3714, LTC3717, LTC3718, LTC3720, and LTC3778 models. 10/15/02 Made a correction to the 3732 error amp drive capability. 10/15/02 Added an LTC3413 symbol and model. 10/14/02 Added an LTC4412 symbol and model. 10/14/02 Added an LT1129 symbol. 10/09/02 Adjusted the LT1930/A models' min ontime. 10/08/02 Fixed a memory leak relating to lossy transmission line memory management. 10/08/02 Fixed a crash mode relating to lossy transmission line memory management. 10/07/02 Fixed a crash mode relating to reading corrupted symbol files. 10/03/02 Improved net label placement wrt the end of a wire. 10/03/02 Fixed a problem changing a trace to an expression of a trace in the select visible trace dialog. 10/03/02 Fixed a crash mode relating to pasting in text in the ASCII editors. 10/02/02 Added symbols and models for the LT1722, LT1723, and LT1724. 10/02/02 The SIN independent souce function now decays to the dc offset instead of zero. 10/02/02 The 1st point of a temperature sweep of operating point is no longer missing from the plot. 10/01/02 An error message is issued if a resistor's resistance evaluates to zero. 10/01/02 Modified the 1766 and 3430 models. 10/01/02 Added an LT3150 symbol and model. 10/01/02 The ASCII editors now use DOS style carriage return/new line sequences. 09/30/02 Added LT1575 symbol and model. 09/30/02 Added LT1734-x.x and LT1734L-x.x symbols and models. 09/30/02 Implemented resistor model parameter tce, exponential temp. coeff[%/�C]. 09/30/02 Implemented resistor instance parameter tce, exponential temp. coeff[%/�C]. 09/29/02 Resistor instance parameter tc2 will now be accepted without tc1. 09/25/02 Removed screen flicker from the color palette editor. 09/25/02 Netlist continuation lines can now be displayed in a different color. 09/25/02 Added LT1797 and LT1800 symbols and models. 09/24/02 Fixed a problem parsing Laplace transfer functions. 09/23/02 Added models and symbols for the LT1934 and LT1934-1 09/23/02 It's again possible to paste characters like '�' into the text editors. 09/21/02 Fixed a potential crash mode relating to opening .raw files without the schematic or netlist. 09/21/02 Fixed a problem updating the symbol's ASCII representation when horizontally scrolling. 09/21/02 Fixed a problem autoranging the Nyquist plots. 09/21/02 Cleaned up some aspects of the open file command. 09/20/02 Implemented attached cursors for Nyquist plots. 09/19/02 It's again possible to save only drain(collector) currents to reduce the size of output files. 09/18/02 Fixed a problem with positioning the cursor for horizontally scrolled text in the new ASCII editors. 09/17/02 Added MOSFET models for the Si7866 and Si7868. 09/16/02 Added the ability to represent complex data as a Nyquist plot in addition to the Bode plot default. 09/11/02 Added an LTC3202 model and symbol 09/11/02 Corrected the synthesizer's record of the 1622's reference voltage 09/10/02 ASCII editor colors are now programmable on the color pallete. 09/10/02 Netlist text is now colorized according to whether the text is a comment or dot command 09/10/02 There's a context menu for capacitor, inductor, and resistor database editors. 09/10/02 JFET libraries can now be searched. 09/09/02 Updated the netlist editor to one with unlimited undo/redo. 09/07/02 Updated the symbol editor to one with unlimited undo/redo. 09/06/02 The color palette dialog sliders now work under Windows 95. 09/05/02 Updated the editor used for ASCII libraries to one with unlimited undo/redo. 09/04/02 The Select Waveform for FFT dialog is shorter to fit better on lower resolution screens. 09/03/02 The installation dialog is shorter so it fits on lower resolution screens. 09/03/02 Panning waveforms will no longer un-sync horizontal axes of multiple panes. 09/03/02 Sped up expanding PWL's using repeat syntax. 09/03/02 Corrected a problem in the LT1256 model. 09/02/02 Added a single level of undo to the symbol editor. 09/02/02 Added a single level of undo to the netlist editor. 09/01/02 Fixed a problem parsing PWL repeat forever...endrepeat syntax 08/30/02 Syntax as "E1 2 0 FREQ { V(1) } = (1K,0,0) (10K,-80.,90)" is now understood. 08/30/02 Fixed some problems with attached cursors on stepped and parametrically plotted data. 08/30/02 Added steady state detection to the LTC3411 08/30/02 Allowed a the frequency domain response of behavoral sources to be specifed with a lookup table. 08/29/02 Fixed a crash mode relating to resimulating complex data while cursors were attached to traces. 08/29/02 Corrected some problems regarding attached cursors ganged across plotting panes. 08/28/02 Corrected the min offtime of the LT1765 model. 08/28/02 Syntax such as "E1 1 0 Laplace { -V(1)*3 } = { 1/(1+s) }" is now understood. 08/28/02 Behavioral sources; e.g., B1 1 0 V=V(3)*V(4); can now also include a Laplace transform. 08/28/02 A problem rerunning complex data is fixed when the saved nodes varies from run to run. 08/28/02 ".ac lin 1 1Meg 1Meg" is now treated the same as ".ac list 1Meg" 08/26/02 The uninstaller is now able to completely delete itself. 08/26/02 The uninstaller will also remove scad3.ini from the windows directory. 08/26/02 Fixed a plotting/compression artifact for stepped data. 08/25/02 Corrected the setup simulation dialog's ability to compose a logarithmic .dc sweep. 08/24/02 The error message for loading schematics where the symbol files can't be found is handled better. 08/24/02 Fixed a problem wrapping the attached cursor from dataset to dataset with the keyboard up/down cursor keys. 08/24/02 The release version can now be seen under properties of the right click menu on the file name in the explorer. 08/23/02 Resistor, capacitor, inductor, MOSFET, diode, BJT, and JFT selection dialogs are now resizable. 08/23/02 Error logs are now shown in the same font as a netlist. 08/22/02 The new installer states which version of LTspice/SwCADIII it will install. 08/21/02 Cancelling all zooms in one pane doesn't unsynchronize it from other panes if sync is selected. 08/20/02 An NT crash mode was fixed. 08/19/02 The distribution was changed from being a self-extracting zip file to a self-extracting/self-installing gzip file. 08/18/02 The uninstall program was replaced with one that better cleanups up after itself wrt the registry. 08/17/02 The install program was replaced. 08/16/02 Added an LT3732 symbol and model. 08/15/02 Fixed a problem using device currents in behavioral sources. 08/15/02 The grip to resize dialogs is now easier to hit with the mouse. 08/15/02 Added an LED diode symbol. 08/14/02 A four terminal MOSFET is now edited in a dialog that allows easier entry of the device's dimensions. 08/13/02 Added a 30BQ060 diode model. 08/12/02 Added a dialog to help enter the simulation command. 08/08/02 Printing waveforms with the monochrome option is now gives more distinct plots. 08/08/02 The PWL source editor no longer tries to sort incrementally specified times. 08/07/02 Added an LT1947 symbol and model. 08/07/02 Added an LT3420 symbol and model. 08/07/02 Fixed a problem relating to parametric(XY) plots. 08/06/02 Fixed a problem with the add trace command for complex data. 08/05/02 Cleaned up some attached cursor problems for parametric plots. 08/05/02 Added an LT1961 symbol and model. 08/02/02 Schematic node names may now be up to 30 characters long. 08/02/02 Fixed a problem regarding cursors on multi-panned plots. 08/02/02 Added an LTC3707 symbol. 08/02/02 Added an LTC3701 symbol and model. 08/02/02 Fixed a problem updating the attached cursor readout. 08/01/02 Fixed a problem in the pinout of one of the opamp symbols. 08/01/02 Fixed a crash mode in the waveform viewer. 08/01/02 Added an SCR symbol. 07/31/02 Fixed a problem with pointing to trace labels with the mouse. 07/31/02 The delete key can be used to enter delete mode in both schematics and waveforms. 07/31/02 The delete trace mode can delete a plotting pane if the pane is empty of traces. 07/30/02 Added a delete trace command. 07/30/02 Added an unlimited undo/redo for the waveform viewer settings. 07/29/02 Added an LTC3728L symbol. 07/29/02 Reduced screen flicker on marching waveforms with multi-paned plots. 07/29/02 Fixed a problem with the LTC1152 symbol. 07/24/02 Complex data is now interpolated as a straight line in the complex plane, instead of on the screen. 07/23/02 The Select waveform dialog box can now be resized to view more complex data traces. 07/22/02 Addd an LT3439 model and symbol. 07/21/02 Fixed a problem showing the system menu of an iconized view window. 07/20/02 Parametric plots now include allow the enpoints to be plotted. 07/19/02 Improved the attached cursor drag behavior for parametric plots. 07/18/02 Corrected the attached cursor ordinate readout for parametric plots. 07/17/02 Corrected the attached cursor ordinate readout for eye diagrams. 07/16/02 Corrected the LTC3412 symbol and model with regard to shutdown and external softstart. 07/15/02 Implemented multiple pane plots. 07/14/02 Fixed the collector current rating of some of the bipolars. 07/13/02 When evaluating parameterized decks, "gmin" can now be used as a synonym for 1e-12. 07/12/02 tc1 and tc2 are now accepted a resistor instance parameters as an alternative to tc as a vector 07/11/02 Cleaned up the bitmap of some of the mouse cursors. 07/10/02 Fixed some attached cursor problems. 07/09/02 Fixed a problem parsing some types of Laplace sources. 07/08/02 Fixed the menu background color when running under Windows XP. 07/06/02 Fixed crash mode handling very long error messages. 07/05/02 Fixed a problem evaluating certain Laplacian expressions at DC. 07/01/02 The delta phase cursor now reads degrees 06/30/02 Added an add-trace dialog. 06/29/02 Fixed a crash mode involving the waveform viewer. 06/28/02 Fixed a crash mode involving long expressions in the waveform viewer. 06/28/02 Fixed an that prevented cursor readout to be updated when switching traces. 06/28/02 Fixed an error converting period to frequency in the cursors. 06/27/02 Implemented attached cursors for eye diagrams. 06/27/02 The cursor up/down keys now make the attached cursor hop to the next step of steped/sweeped data sets. 06/26/02 Implemented attached cursors for parametric plots. 06/25/02 Allowed keyboard left right cursor keys to control the attached cursors. 06/25/02 Allowed complex data set cursors to be attached to phase or group delay. 06/24/02 Added attached cursors for complex data sets. 06/23/02 Added icons to the color palette control tabs. 06/22/02 Added attached cursors for real data sets. 06/21/02 Allowed some recovery from a singular matrix during the .op solution. 06/20/02 The pentrode symbol was respelled pentode. People upgrading from previous versions will have to delete pentrode.asy manually. 06/19/02 Fixed a model parsing problem. 06/19/02 Added LTC3406B, LTC3406B-1.5, and LTC3406B-1.8 symbols and models. 06/19/02 Added LTC3406, LTC3406-1.5, and LTC3406-1.8 symbols and models. 06/18/02 Fixed stepgmin option. 06/18/02 Added an LT1945 symbol and model. 06/18/02 Added an LT1944-1 symbol and model. 06/18/02 Added an LT1944 symbol and model. 06/17/02 Added an LTC3718 symbol and model. 06/16/02 A PWL can now use "repeat for <count> (,) (,) (,) endrepeat" syntax. 06/15/02 Corrected an error parsing .noise calculations with square braces about the output node name. 06/14/02 A PWL can use the keyword "FILE" to include points from another file. 06/14/02 A PWL time can be preceded with a '+' go mean that the time is incremental from the previous time. 06/14/02 Implemented PWL time_scale_factor and value_scale_factor. 06/13/02 A '*' can not longer introduce the start of a comment mid-line if not preceded with whitespace. 06/13/02 Implemented tt for the BSIM3 bulk junction. 06/13/02 Fixed a problem reading "params:" syntax when there were no parameters listed. 06/12/02 Added progress information during .noise calculations. 06/12/02 Made some adjustments to the LTC3412 model. 06/11/02 Implemented cross probing of total device noises. 06/11/02 The waveform plotting window remembers linear vs. log settings between simulations. 06/11/02 The waveform plotting window takes a hint from the sweep type for linear vs. log settings. 06/10/02 Fixed various problems in .noise calculations. 06/09/02 Implemented nlev and gdsnoi parameters in MOS1, MOS2, and MOS3 06/08/02 Cleaned up some plotting problems for .step'ed data sets. 06/08/02 Cleaned up some plotting problems relating to data sets containing some singular data points. 06/07/02 Corrected some noise calculation problems in MOS levels 1, 2, and 3. 06/06/02 Added an LT1940 symbol and model. 06/05/02 Added an LTC3778 symbol and model. 06/04/02 Fixed a problem in the DC solution strategy. 06/04/02 Added a new type of analysis, ".dc temp..." Much faster than ".step temp ..." but doesn't re-evaluate deck parameters even if they call temp and not well tested, yet. 06/03/02 Added an LTC3412 model and symbol. 06/02/02 A error is issued if the disk get full while writing a .wav file. 06/01/02 Output data file sizes are no longer limited to 2Gigabyte, but disk size. 05/31/02 Fixed a problem parsing some E1 n1 n2 POLY(N) ... syntax. 05/31/02 Added an LTC3411 model and symbol. 05/31/02 Updated the help system with .wav file I/O documentation. 05/31/02 Adjusted the DC solution strategy. 05/30/02 Fixed a crash mode relating to aborting a simulation during gmin stepping. 05/30/02 Increased the search path of further included libraries to include the directory of the library invoking the inclusion. 05/30/02 Fixed a grid snap issue when copying components pointed to by a text attribute. 05/29/02 Added IGBT symbols(for 3rd party supplied models). 05/29/02 Fixed a problem computing paths relative to the schematic directory. 05/29/02 Added examples showing .wav file I/O. 05/29/02 Enabled device evaluation bypass for BJT's and diodes. 05/29/02 Fixed a crash mode relating to selecting a pin current in a model dialog while the simulation was in progress. 05/29/02 Fixed a memory leak relating to cross probing. 05/29/02 Removed more function calling overhead in device evaluations. 05/28/02 It's possible to save only Idrain(or Icollector) of transistors in order to reduce the size of the output .raw data file. 05/24/02 Fixed a crash mode involving BSIM3 and BSIM4. 05/04/02 Corrected the LTC3440 input current limit. 05/24/02 ".dc temp ..." is now accepted as ".step temp ..." 05/23/02 Node voltages or device currents may now be written out as a .wav file. Syntax: .wave "C:\cdq.wav" 16 44.1K V(left) V(right) 05/23/02 The unconnected indicator of a ground symbol or net label is now drawn in the correct color. 05/22/02 Corrected a couple errors in the synthesizer template circuits. 05/21/02 Inverse trig functions now consistently use radian measure. 05/21/02 A .wav file can be used as an source. Set the value of a voltage source to "wavefile=path". 05/19/02 Corrected the slope compensation of the LTC1773(again!). 05/19/02 Made some corrections to the LTC1736 model. 05/18/02 Sped up PWL current source evaluation. 05/17/02 Corrected the slope compensation of the LTC1773. 05/17/02 Sped up PWL voltage source evaluation. Multi-Megabyte PWL's can now be viably used in a simulation. 05/17/02 Added an LTC3831 symbol and model. 05/16/02 Added LTC3830 and LTC3830-1 symbols and models. 05/15/02 Improved the width of column of listbox controls. 05/15/02 Sections of a wire can be deleted if a new wire is drawn while holding the alt key. 05/15/02 Added a check box to hide a waveform on the expression editor. 05/15/02 Added a menu command to tile the windows vertically 05/15/02 Fixed a memory leak in BSIM4. 05/15/02 Fixed a problem merging model files with continuation lines. 05/14/02 Trapped a crash mode when resimulating with a marching waveform expression. 05/14/02 Fixed a memory leak in BSIM3. 05/11/02 Improved the timestep strategy of short delay lines. 05/10/02 The original Laplace syntax style works again. 05/10/02 Added a 2N7002 model and symbol. 05/10/02 Added an LTC3720 model and symbol. 05/08/02 The Select real waveform dialog box can now be resized to view more traces. 05/08/02 Corrected the NSPW500BS white LED model. 05/08/02 Improved current monitoring in BSIM4. 05/07/02 Improved current monitoring in BSIM3. 05/07/02 A dollar sign may be used to start a comment if isolated with white space or commas to either side. 05/07/02 A '*' may start a comment in the middle of a line if it is not possibly otherwise part of an algebraic expression. 05/07/02 .model parameters may be set equal to user parameters without curly braces or single quotes. 05/07/02 Single quotes can be used like curly braces for parameter substitution. 05/07/02 Implemented multiple library entries within one library file, i.e., ".lib '<filename>' <entry>" syntax 05/06/02 Defeated bypass evaluation in BSIM3. 05/05/02 An empty .four statement can no longer cause a crash. 05/03/02 Implemented binning for all MOS and BSIM models. 05/03/02 Corrected an error in BSIM3 instance mfactor. 05/02/02 Implemented BSIM3 model parameters Rd and Rs. 05/02/02 Corrected the BAT54 diode model. 05/01/02 An error is now generated if an analysis tries to exceed the 2Gigabyte output data file size. 05/01/02 Improved timestep control of simulations using independent sources. 04/30/02 Marching waveform .stepped datasets now use the same color coding as statically displayed data. 04/29/02 Added some output voltage constraints in the synthesizer for sense voltage CM range. 04/29/02 Added a very preliminary LT3440 symbol and model. 04/25/02 Added an LT1937 symbol and model. 04/25/02 Zero valued capacitors no longer corrupt the efficiency report. 04/25/02 Added a hotkey for forcing the step to be thrown. 04/25/02 Made some changes to the LTC1629, LTC1929, and LTC3729 models. 04/25/02 The synthesizer(switch selector guide) is now enabled by default. 04/25/02 Corrected the max current in some poly-phase parts in the synthesizer. 04/25/02 Updated the LTC1624 model. 04/25/02 Added Inductors supplied by W�rth Electronics 04/24/02 Updated the LTC1430,A models. 04/24/02 Added an LTC3440 symbol and model. 04/22/02 Trapped a singularity in the data compression algorithm. 04/22/02 Fixed a problem doing FFT's of some passages of compressed data. 04/21/02 Added some more educational examples. 04/20/02 Corrected the macromodel of a 555 timer. 04/18/02 Added the BSIM3 model parameter nqsmod. 04/17/02 The dialog box that shows a schematic's netlist or a simulation's error log can now be resized. 04/16/02 Now it issues an error message instead of crashing when subcircuits are called with too many ports. 04/15/02 Added an LT1310 symbol and model. 04/12/02 Fixed a problem in the LTC1693-3 model. 04/12/02 Added a model for the NSPW500BS, a white LED. 04/12/02 Fixed a problem editing I/V points of current lookup tables. 04/12/02 Added an LT1932 symbol and model. 04/11/02 Corrected the LT1246 and LT1257 models so that they can't go to 100% duty cycle. 04/11/02 Corrected the LTC1871 model to include the product's overvoltage protection logic. 04/11/02 Added an LTC3704 symbol and model. 04/11/02 Added the wd model parameter to level 1, 2, and 3 MOS. 04/10/02 Fixed a problem in level 3 MOS relating to Kappa. 04/10/02 Multicolumn listbox controls try to pick a better width of column. 04/09/02 Fixed another problem parsing some E1 n1 n2 TABLE {} () ()... syntax. 04/09/02 Fixed a problem merging databases of models. 04/09/02 Added LTC3719 model and symbol. 04/08/02 Added LTC3400B model and symbol. 04/06/02 Non-model statements at global scope in .lib'ed files are now ignored. 04/06/02 The first line of a .lib'ed file is no longer ignored. 04/05/02 Added LTC1983-3 and LTC1983-5 models and symbols. 04/05/02 Added LTC1911-1.5 and LTC1911-1.8 models and symbols. 04/05/02 Corrected an error in the LTC1503-1.8 and LTC1503-2 models. 04/05/02 Added an LTC3717 model and symbol. 04/04/02 Improved the sparse matrix's memory strategy. 04/04/02 Added an LT1946A model and symbol. 04/04/02 Added LTC3405A, LTC3405A-1.5 and LTC3405A-1.8 models and symbols. 04/03/02 Added an LTC1778-1 model and symbol. 04/03/02 The No Bypass SPICE option is now kept between program invocations. 04/02/02 Added LT1374HV, LT1374HV-5 and LT1370HV symbols 04/02/02 Modified the LT1616 model. 04/01/02 Modified the boost pin voltage constraints in the synthesizer. 04/01/02 Added a 555 timer model. 04/01/02 Fixed a crash mode involving a warning message from issues resolving parameter substitution evaluation. 04/01/02 A grid is now drawn in the graphic view of edited symbols. 04/01/02 Updated the LT1619 model. 04/01/02 Improved it's ability to only read the required waveforms into memory. 04/01/02 Added the ability to draw schematics with thicker lines. 03/31/02 Added boost bin voltage constraints to the synthesizer. 03/30/02 Fixed an error parsing some E1 n1 n2 TABLE {} () ()... syntax. 03/29/02 Fixed the pinout of the LT1440 and LT1441 symbols. 03/28/02 Corrected the behavior of the Vprog pin on the LTC1436A, LTC1436A-PLL and LTC1437A models. 03/28/02 Added a MBR20100CT diode model. 03/27/02 An LT1578-25 was added. 03/27/02 The LT1576 and LT1578 symbols were modified. 03/26/02 Fixed AC analysis of lossy transmission lines for the case of no loss. 03/26/02 Fixed memory leaks in BSIM3, BSIM4, and BSIMSOI 03/25/02 Updated BSIM3 to version 3.2.4 03/24/02 Updated BSIM4 to version 4.2.1 03/23/02 Updated SOI BSIM to version 2.2.3 03/23/02 Improved error reporting when a MOSFET model couldn't be found. 03/23/02 Fixed a problem expanding current controlled switches from subcircuits. 03/21/02 Fixed a problem expanding subcircuts containing long(Megabyte) PWL's 03/19/02 Allowed numbers to be squared again in Laplace expressions. 03/16/02 Symbols can now be defined to more more than just the value attribute visible. 03/15/02 Added a symbol and model for the LT1946. 03/13/02 Added symbols and models for the LT1767-1.8, LT1767-2.5, LT1767-3.3, and LT1767-5. 03/12/02 Corrected a problem in computing the dissipation in the LT1176 model. 03/11/02 Corrected an error in MOS level 1-3 drain and source current monitoring. 03/10/02 Reduced the default parallel loss of inductors(if unspecified). 03/10/02 Certain compressed waveform passages are rendered with finer detail over a broader range of screen zoom. 03/09/02 Fixed the Jacobian of pwr(x,y) and pwrs(x,y). 03/08/02 Corrected the computation of d(f(x)**g(x))/dx in behavioral expressions. 03/08/02 Corrected log10() usage in behavioral expressions. 03/07/02 Corrected the slope of LT1618 model. 03/07/02 Improved the accuracy of the LT1370 model negative reference. 03/07/02 The independent source editor now recognizes "sin" for "sine". 03/07/02 Corrected the slope of LT1616 model. 03/06/02 Updated the LT1611 and LT1613 models. 03/06/02 Corrected the slope of the LT1372 model. 03/06/02 Corrected the slope of the LT1371 model. 03/05/02 Fixed the Jacobian of atan2(). 03/05/02 Further optimized then intermediate code of the behavioral modeling expressions. 03/03/02 Fixed the output range of the diff amp in the LTC1929 model. 03/03/02 Fixed a crash mode when a MOS model couldn't be found. 03/01/02 Closing the waveform window of a running simulation now stops that simulation. 03/01/02 Trapped some floating point errors in the synthesizer 03/01/02 Fixed the output range of the diff amp in the LTC1629 model. 03/01/02 Added a symbol for the LT1121 02/28/02 The timestamp of .cir netlist file isn't changed when run, but save on run is still automatic if modifed. 02/27/02 Fixed a problem calling an inductor current in a behavioral expression. 02/27/02 Fixed a problem with user defined substitution evaluation. 02/27/02 Fixed a problem with parameter substitution scope. 02/26/02 sdt() is now accepted as a synonym for idt() 02/25/02 If max is less then min in limit(x,min,max) they are now reversed before further evaluation. 02/24/02 Defaults may now be kept in the registry instead of a .ini file if involked with the command line switch "-registry" 02/21/02 The schematic grid color is now drawn in the user-selected color, instead of always black. 02/20/02 The first line of a .lib file may now be empty and still count as the leading comment. 02/20/02 Implemented lookup tables for Laplace transfer functions. 02/19/02 Allowed user defined functions in behavioral modeling. 02/19/02 Allowed nested user defined functions in parameter evaluation. 02/18/02 Corrected some errors in BSIM2 current monitoring 02/18/02 An error message is now issued if a .ac calculation is attempted with a level 6 MOS device. 02/17/02 Corrected some errors in MESFET current monitoring 02/16/02 Added current probing to small signal analysis data. 02/16/02 Fixed an error in evaluating behavioral sources in small signal ac analyses. 02/15/02 Fixed a crash mode that happened during a keystroke while the schematic context menu was displayed. 02/14/02 Made it possible to abort a simulation while computing the impulse function from the Laplace transform. 02/14/02 Trapped possible singularities in Laplacian evaluation. 02/13/02 The drop-list of waveform colors now has a vertical scroll bar so that it's easier to select any of available colors. 02/13/02 It now issues an error message if a time domain analysis is attempted on a Laplace transform that is singular at DC. 02/13/02 It will now try to do a Laplace time domain simulation even if it can't find a maximum frequency at which the transfer function rolls off. 02/13/02 It now issues an error if the start time is not earlier than the end time in a .TRAN statement. 02/12/02 Improved error reporting for parameter substitution pass. 02/12/02 Now accepts tbl() for table() in evaluating parameter substitution. 02/12/02 Extended the CM range of the LTC1628 and LTC1628-PG models' sense amps to better reflect the product. 02/12/02 Extended the CM range of the LTC1735 and LTC1735-1 models' sense amps to better reflect the product. 02/11/02 Fixed a problem with unraveled phase angles of a stepped .AC analysis. 02/11/02 Worked around a Win98 bug which caused a crash during extensive color palette edits. 02/09/02 Added preliminary support the [abs]delay(expr, delay[, max_delay]) analog behavioral function. 02/09/02 Improved the accuracy of the ddt(expr) analog behavioral function. 02/09/02 Added the function hypot(x,y) = sqrt(x*x,y*y) to the behavioral source. 02/08/02 Updated the inductor database with more inductors. 02/08/02 It now remembers the "Print Monochrome" setting between program invocations. 02/08/02 Made the "Print Monochrome" option apply both to schematics as well as waveforms. 02/07/02 Checked for other instances of SwitcherCAD III running before syncing the release. 02/06/02 Added preliminary support for ddt(expr), idt(expr[,ic[,assert]]), and idtmod(exper[,ic[,mod[,offset]]]) analog behavioral functions. 02/05/02 Corrects some errors in behavioral expression evaluation and differentiation. 02/01/02 Changed named an undefined node or inductor in a .ic statement to a warning instead of a fatal error. 02/01/02 Modifed the Inductor and Capacitor symbol editors to uniform units and allow more flexibility in the representation of values. 01/31/02 Corrected some errors in the help files. 01/31/02 Fixed a race condition in the LTC1773 model. 01/30/02 Modeled the off-time foldback of the LT1615 and LT1615-1. 01/28/02 Fixed the display of the system menu seen by the clicking the right button on the icon in the task bar. 01/27/02 Improved the autoscale range for low level, invariant complex data. 01/25/02 It now tries to pick a better location for newly visible component attribute fields. 01/24/02 Improved symbol attribute initial placement for simple parts like R's, C's, and L's. 01/24/02 Trapped an intermittent crash mode related to marching waveform plots with no traces. 01/24/02 Revised the LTC3728 model. 01/24/02 Fixed a problem with the slope in the LTC1628-SYNC and LTC3727 models. 01/22/02 Added LTC3727 and LTC1628-SYNC models and symbols. 01/19/02 Allowed FFT's of real .STEP'ed data sets 01/19/02 Allowed FFT's of complex .STEP'ed data sets 01/19/02 Changed trace color for each .step run if there's one one trace quanity plotted 01/17/02 Improved the LTC1433 model's DC solution w.r.t. soft start cap voltage 01/17/02 Fixed a latch-up problem in the LTC1142, LTC1143, LTC1147, LTC1148, LTC1159, LTC1265, LTC1266, LTC1267, and LTC1626 models 01/16/02 Added an LTC3400 model and symbol 01/15/02 Fixed a problem with LT1111-12 symbol 01/14/02 Improved timestep control for the LT1073 models. 01/11/02 Caused setting manual plot limits to pause marching waveforms. 01/10/02 Fixed a problem stepping VDMOS parameters 01/09/02 Removed a call to MyRegisterClass() in moveexe.exe as a step toward running the update utility under wine(Linux) 01/08/02 Fixed some UI issues in the PWL grid editor. 01/08/02 Mentioned .STEP and .TEMP in the help files. 01/07/02 Corrected the units of some of the independent current source dialog editor labels. 01/03/02 Prevented the full grid style from obscuring marching waveforms 01/01/02 Included the parasitic Rlshunt of and capacitor in the noise calc. 01/01/02 Included the parasitic Rpar of and capacitor in the noise calc. 01/01/02 Included the parasitic Rser of and capacitor in the noise calc. 01/01/02 Included the parasitic Rser of an inductor in the noise calc. 01/01/02 Included the parasitic Rpar of an inductor in the noise calc. 12/31/01 Included the parasitic Rser of a voltage source in the noise calc. 12/31/01 Changed the LT1725 UVLO quiescent draw. 12/29/01 Enabled autoscroll for new installations. 12/27/01 Added dialogs to help enter PULSE, SINE, EXP, SFFM, and PWL independent source functions. 12/23/01 Trapped circuits consisting solely of current sources. 12/19/01 Highlighted component body color if the component contains a string in the find dialog 12/14/01 Improved support for automatically scrolling while placing devices or wires. 12/13/01 Fixed a problem merging old bipolar, diode, JFET, and MOSFET model databases with new web updates(for Win2K, still doesn't work Win98) 12/13/01 Automatically deletes wire segments which connect to two or pins of the same components 12/13/01 Added a right button menu for wires that highlight or delete the entire net 12/12/01 Added models and symbols for the LT1513 and LT1513-2. 12/12/01 Increased the number of VDMOS power MOSFET models. 12/12/01 Added preliminary support for automatically scrolling the zoomed schematic while placing devices or wires. 12/11/01 Improved the behavior of scrolling the scroll bars while dragging the mouse on the background. 12/11/01 Fixed a problem drawing the large cursor shown while drawing wires. 12/11/01 It now remembers the size on postion on the screen from the last time it was run. 12/10/01 Removed some flicker from the schematic color preview window 12/10/01 Made the new wire thicker so it can be more easily seen through the big cursor 12/09/01 Added icons for more menu items 12/08/01 Added control over the schematic color palette 12/07/01 Added control over the waveform viewer color palette 12/07/01 Fixed a memory leak regarding .four commands. 12/06/01 Added an LT1192 symbol. 12/05/01 Fixed a crash mode that could occur when plotting noise calculation results for the first time. 12/04/01 Improved boost pin characteristics for the LT1766 and LT1956 models. 12/04/01 Added FB input bias current for the LT1766 and LT1956. 12/03/01 Added some control over waveform trace color. 12/03/01 Reset the FPU control word when printing to defend against broken Win98 printer drivers. 12/01/01 Fixed a waveform compression artifact. 12/01/01 Trapped more math exceptions while printing under Win98. 11/29/01 Modeled LT1316 shutdown quiescent current. 11/29/01 Modeled LT1615 shutdown quiescent current. 11/29/01 Modeled LT1614 shutdown quiescent current. 11/29/01 Modeled LT1613 shutdown quiescent current. 11/29/01 Modeled LT1612 shutdown quiescent current. 11/29/01 Modeled LT1611 shutdown quiescent current. 11/29/01 Improved the eye diagram property dialog. 11/29/01 Made the full grid line style dashed and in a darker in grey 11/28/01 Fixed a problem parsing parenthesized nodes in subcircuits 11/28/01 Trapped more singularities in behavior expression evaluations. 11/27/01 Added netlist level support for all seven possible SOI BSIM terminals. 11/27/01 Fixed a problem parsing SOI BSIM invocations. 11/27/01 Fixed the PLL2.asc example 11/27/01 Added LIST to .dc sweep syntax 11/26/01 Added logarithmic .dc sweeps 11/25/01 Now the 1st line of a library file(.lib statement) is treated as a comment. 11/25/01 Added some vacuum tube symbols. 11/25/01 Made source stepping escapable. 11/25/01 Fixed some issues with dc sweeps. 11/18/01 Sped up the source-stepping algorithm. 11/18/01 Allowed no value to be given for a voltage source, interpreted as zero, and issue a warning. 11/17/01 Allowed subcircuits with only one or two pins to be cross-probed for current. 11/17/01 Raised the symbol image to top after updating symbol. 11/17/01 Allowed null files to be included without truncating the deck. 11/17/01 Fixed some problems with the symbol browser hierarchy 11/16/01 Fixed a parsing problem using curly braces for parenthesis. 11/16/01 Fixed constant voltage charging in the LT1510, LT1510-5 11/15/01 Fixed differenciation of behavioral expressions using PWRS(). 11/15/01 Trapped some singularities in behavior expression differentiation. 11/15/01 Extended the symbol browser to allow deeper directory hierarchy. 11/15/01 Fixed a problem parsing node names with extra curly braces around them in behavioral sources. 11/14/01 Fixed a problem parsing node names with trailing spaces inside square braces in behavioral sources. 11/13/01 Added an LT1765 model and symbol. 11/13/01 Fixed a problem pausing the simulation when it erroneously thought the waveform view was being zoomed. 11/13/01 Made efficiency table columns line up when using a serif font. 11/13/01 Fixed a problem which caused warnings about missing MOSFET models that were actually there. 11/12/01 Added the npn4, pnp4, and lpnp symbols to the distribution. 11/12/01 Added PC817A, PC817B, PC817C, and PC817D optoisolator models and symbols. 11/12/01 Added CNY17-1, CNY17-2, and CNY17-3 optoisolator models and symbols. 11/12/01 Added MOC205, MOC206, and MOC206 optoisolator models and symbols. 11/12/01 Added 4N25, 4N25A, 4N26, 4N27, and 4N28 optoisolator models and symbols. 11/10/01 Removed some model name restrictions. 11/10/01 Removed some superfluous dialog boxes after cancelling a simulation. 11/10/01 Added a message box and option to cancel simulation when a model isn't found. 11/09/01 Corrected some misspelled words in symbol descriptions. 11/09/01 Documented EKV level number as 12 in the help. 11/09/01 Added the instance parameter, m, to the EKV device. 11/09/01 Added diode models for the MBR0540, MUR460, and MBRB2545CT. 11/09/01 Removed the mixed-mode devices from the efficiency calculations. 11/09/01 Added m-factor in the EKV MOSFET device. 11/08/01 Added LTC3401 quiescent current. 11/08/01 Sorted Efficiency Report entries. 11/08/01 Fixed an LTC1922-1 soft start issue. 11/08/01 Added an LTC3728 model and symbol. 11/08/01 Added an LTC3729 model and symbol. 11/08/01 Set minimum on time for LTC1629 and LTC1629-PG to 200ns. 11/08/01 Fixed EKV impact ionizatin and bulk current monitoring. 11/07/01 Automatically restarted marching waveforms when cancelling zoom. 11/07/01 Automatically paused marching waveforms when zooming. 11/07/01 Made it possible to make measurements on marching waveforms. 11/07/01 Added LT1930 FB input bias current. 11/07/01 Added a warning if using a SMPS product model for something other than a time domain analysis. 11/07/01 Made it possible to see the description of non-edible symbols after placing. 11/07/01 Fixed the description of the LT1424-5. 11/07/01 Changed the 1241 series erramp's GBW from 1MHz to 2MHz. 11/06/01 Adjusted LTC1562 slew rates. 11/05/01 Updated waveform window label with the .cir basename even if renamed and rerun. 11/05/01 Fixed the sign of TCV of P-channel EKV devices. 11/05/01 Fixed a problem with EKV bulk leakage current monitoring. 11/05/01 Broke EKV impact ionization(Fixed on 11/08/01). 10/25/01 Fixed a problem in expression evaluations. 10/25/01 Cleaned up statusbar information during simulation. 10/24/01 Added models and symbols for the LTC1562, LTC1562A and LTC1562-2. 10/23/01 Updated help file. 10/23/01 Changed the LTC1871 model to turn off INTVcc when run is low. 10/23/01 Fixed a problem evaluating user defined functions. 10/22/01 Fixed the Pgood pin of the LTC3714. 10/20/01 Fixed a problem back-annotating subcircuit ports with symbol pin names for steadystate .asc simulations. 10/20/01 Added LT1617,-1 FB bias current. 10/20/01 Added LT1533, LT15334 FB bias current. 10/20/01 Added LT1371,HV FB bias current. 10/20/01 Added LT1370 FB bias current. 10/20/01 Added LT1377 FB bias current. 10/19/01 Modified the LT1372, LT1372HV, and LT1377 symbols. 10/19/01 Fixed a initial solution issue with the LTC1436A, LTC1436A-PLL, and LTC1437A models. 10/19/01 Removed fixed-voltage versions of the LTC1626. 10/19/01 Added LTC1626 FB bias current. 10/19/01 Added LTC1574 FB bias current. 10/18/01 Added LTC1265 FB bias current. 10/18/01 Added LTC1174 FB bias current, fixed Ipgm operation. 10/17/01 Added an LT1074HV symbol. 10/17/01 Modified the LT1074 symbol. 10/17/01 Added LTC1148,L,HV FB bias current. 10/17/01 Added LTC1147L FB bias current. 10/17/01 Changed the LT1507 symbol. 10/17/01 Changed the LT1376 symbol added an LT1376HV symbol. 10/17/01 Changed the LT1375 symbol added an LT1375HV symbol. 10/16/01 Added LT1074, LT1076 FB bias current. 10/16/01 Added an LT1371HV, modified the LT1371 symbol. 10/16/01 Added LT1372HV and LT1373HV symbols. 10/14/01 Removed the "Compute Power dissipation" control panel option(set up in tran init). 10/14/01 Increased subckt pin name back annotation priority so it's done earlier. 10/12/01 Added LT1070HV LT1071HV, LT1072HV, LT1082 feedback bias currents. 10/11/01 Fixed a problem computing the size of extended Ariel font characters. 10/09/01 Fixed the Pierce oscillator example. 10/09/01 Fixed a problem in the field update utility client. 10/09/01 Improved autoranging schematic zoom for text in Ariel font. 10/09/01 Improved schematic font selection feedback. 10/08/01 Improved LTC3401 and LTC3402 model latency and initial conditions. 10/08/01 Added an example of a .op simulation(back annotation of schematic document). 10/08/01 Improved the pre-netlister's capability to sniff out analysis commands. 10/08/01 Added the ability to see .op voltages and currents on the status bar. 10/08/01 Fixed a problem with reported device currents for .op 10/08/01 Added Rpar and Cpar included for the Gowanda inductors. 10/07/01 Linked in preliminary SOI support. 10/07/01 Added some flexibility in the font used for schematics. 10/05/01 Modified the License.txt file. 10/04/01 Added an example of a .noise simulation. 10/03/01 Added an example of a .dc sweep. 10/02/01 Added an LTC3405 model and symbol. 10/02/01 Added prelim. LT1510 and LT1510-5 models, but the Design Eng. is out due to knee surgery. 10/01/01 Modified the bitmap size when copying a schematic to clipboard. 10/01/01 Fixed a problem when printing on Windows 98. 09/25/01 Added a description to the LTC1622 symbol. 09/25/01 Changed the S/S pin name to _SHDN on the LT1370 and LT1377(sync isn't modeled). 09/25/01 Changed the S/S pin name to Run/SS on the LTC1627. 09/24/01 Fixed a problem saving and running large netlist files on Windows 98. 09/24/01 Added the varistor symbol to the distribution. 09/23/01 Added an LT1618 model and symbol. 09/23/01 Added an LT1512 model and symbol. 09/23/01 Changed LT1372 FP pin bias current to 250uA. 09/21/01 Added an LTC1931A model and symbol. 09/21/01 LTC1931 model, max duty cycle changed from 86% to 90%, improved model latency, reference, and slope. 09/20/01 LTC1624 model, max duty cycle changed from 93% to 95%. 09/19/01 LTC1771 model, current limit corrected. 09/19/01 Rpar and Cpar included for Coilcraft inductors.