Professional Documents
Culture Documents
175 mm
Options
Applications
structure with highly rigid X-axis
Diagrams roller type LM guideway
Specifications (6.9 inch)
for reliable machining.
Z-axis
Z-axis 330 mm X-axis
(13.0 inch)
Rapid feederate
h)
Total
inc
30
dim
3.1m 2ension
X / Z-axis m/min
.5
(66
1850
mm (7
mm
2.8 in
(1181.1 ipm) ch)
90
16
Machining Area
Bar working diameter
39 (28.8)
Torque : N·m (ft-lbs)
210 mm (8 inch)
1333 4000
)
25 x 25
1.3
ø420 (16.5)
2(
mm (MAX. SWING DIA.)
ø3
20 (0.8)
The durable eight station
(1.6)
40
( 1.0 x 1.0 inch)
turret ensures stable tool
.2)
(10
)
9.6
58
rotation and increase
(
ø2
43
(1.0)
ø2
25
(2.0)
No. of Tool positions
50
.)
machine performance.
DIA
8 stations
RN .6)
ING
. TU (12
7 50
AX 0
(0.3) (2.0)
(M ø32
12 stations
ø21
(8.5 7
)
(0.8)
21
140 (5.5) 40 (1.6) 160 (6.3) 15 (0.6)
180 (7.1) 175 (6.9) (X-AXIS TRAVEL)
355 (14.0)
Tailstock
Quill diameter
MT#4
430 mm
(16.9 inch)
Door opening
02 / 03
Basic Information
Standard / Optional
Basic Structure
Specifications Standard Optional X Not applicable
LEO LEO
No. Description Features No. Description Features
1600 1600
Detailed Various optional 1
Chuck
170 mm (6 inch) ● 31 Top cover ○
2 210 mm (8 inch) ○ 32 Parts catcher ○
features are available for
Information
3 Soft Jaws ● 33 Optional Bar feeder interface ○
Jaw 34 device Air conditioner ○
Options 4 Hardened & Ground Jaws ○
Applications customer-specific work 5
Tailstock
Manual_Live ○ 35 Work & Tool counter ○
6 Live center_MT4 ○ 36 Signal tower ○
Diagrams environments. 7 Chucking Chuck clamp confirmation ○ 37 PARTS CATCHER_BOX TYPE_
MAIN/LEFT SPINDLE
○
Specifications 8 8 stations ●
Turret 38 TOOL SETTER_MANUAL ○
9 12 stations ○ TOOL SETTER_AUTOMATIC_
10 1.3 bar 39 ○
● ELECTRIC
Coolant
11 1.5 bar ○ 40 U-DRILL HOLDER CAP ○
pump
12 4.5 bar ○ 41 AUTOMATIC FRONT DOOR ○
13 Oil skimmer (Belt type) ○ WITH SAFETY EDGE
Coolant NUMBER OF TOOL ST. FOR
14 Rear side ● 42 ○
option MAIN_12ST
Quick change CAPTO 15 Right side ○
43 COOLANT PRESSURE SWITCH ○
17 Hinged belt ○
Rear chip 44 COOLANT CHILLER ○
18 Magnetic scrapper ○ Customized
conveyor 45 Special AUTO WORK MEASUREMENT_ ○
19 Screw (auger) ○ OLP40_RENISHAW
Option
20 Hinged belt ○ 46 CHIP CONVEYOR TYPE_SCREW ○
Side chip
21 Magnetic scrapper ○ AIR LIMIT SENSING ON
conveyor 47 ○
22 Screw (auger) ○ CHUCK_PREPARATION
23 Folklift 110L (for auger conveyor) ○ 48 AIR CHUCK PREPARATION ○
24 Folklift 200L (for auger conveyor) ○ 49 MIST COLLECTOR_0.4KW ○
25 Folklift 220L ○ 50 MIST COLLECTOR_0.75KW ○
26 Chip Folklift 300L ○ 51 TSC FOR MAIN/LEFT SPINDLE_ ○
PREPARATION
The Quick Change Tool system simplifies 27 bucket Folklift 380L ○
52 TSA FOR MAIN/LEFT SPINDLE_ ○
tool change operation. Recommended for 28 Rotation 220L ○ PREPARATION
users who need to change tools frequently 29 Rotation 300L ○ Coolant level switch :
53 ○
or reduce the set-up time. 30 Rotation 380L ○ Sensing level - Low
✽Please contact DOOSAN to select detail specifications. ✽✽ Tool setter & Part catcher options are not possible to
be mounted at the machine together due to restriction
of installation space
External Dimensions
LEO 1600
Unit: mm (inch)
1635 (64.4)
(43.0)
1093
980 (38.6)
770 (30.3)
(14.6)
370
(8.4)
213
1850 (72.8)
2256 (88.8) 718 (28.3)
LEO 1600
* Some peripheral equipment can be placed in other places
Tooling System / Working Range
(8)
Boring Bar
I.D Tool Holder O.D Tool
Ø32 (Ø1.3)
(H32) □25
2A 8st Turret
(1)
Drill Sockets
MT#1-H32
Drill MT#2-H32 Face Tool Holder
MT#3-H32
Standard
Working Range
Unit: mm (inch)
OD Holder ID Holder
(1.6)
(1.6)
40
40
(X-axis travel)
15 38 15 (0.6)
15 (0.6)
(X-axis travel)
175 (6.9)
15 (0.6)
175 (6.9)
160 (6.3)
160 (6.3)
(0.5) (1.5)
(0.6)
15 (0.6)
15
78 (3.1) 12 71 (2.8)
(0.5)
80 (3.1) 80 (3.1)
Std. 6”: Ø169 (6.7) 6”: 91 (3.6) 6”: 33 (1.3) (Quill travel) Std. 6”: Ø169 (6.7) 6”: 91 (3.6) 6”: 33 (1.3) (Quill travel)
Opt. 8” : Ø210 (8.3) 8” : 111 (4.4) 8” : 39 (1.5) Opt. 8” : Ø210 (8.3) 8” : 111 (4.4) 8” : 39 (1.5)
168 (6.6) 320 (12.6) (tailstock travel) 168 (6.6) 320 (12.6) (tailstock travel)
46 47 330 (13.0) 40
(1.8)(1.9) (Z-Axis travel) (1.6)
15 (0.6)
(0.3) (2.0)
7 50
15 (0.6)
(X-axis travel)
32 143 (5.6)
175 (6.9)
(1.3) (0.1)
32 2
(1.3)
12 111 (4.4)
(0.5) 80 (3.1)
Std. 6”: Ø169 (6.7) 6”: 91 (3.6) 6”: 33 (1.3) (Quill travel)
Opt. 8” : Ø210 (8.3) 8” : 111 (4.4) 8” : 39 (1.5)
168 (6.6) 320 (12.6) (tailstock travel)
04 / 05
Basic Information
Machine Specifications
Basic Structure
Detailed
LEO 1600 Item Unit LEO 1600
Motors Coolant pump motor power kW (Hp) 0.18 {0.4/1.1}* (0.2 {0.5/1.5})
* { } : Option
LEO 1600
CNC Specifications
Standard Optional X Not applicable
DOOSAN DOOSAN
FANUC No. Division Item Spec. Fanuc i Plus
2-Axis
No. Division Item Spec. Fanuc i Plus
2-Axis
1 Control paths 1 Path Interruption type custom
58 ○
Simultaneously controlled macro
2 2 axes
axes 59 Canned cycle ●
3 Cs contouring control X 60 Multiple repetitive cycles G70~G76 ●
4 Torque control ●
61 Pocket
5 HRV2 control ● Program Multiple repetitive cycles II ●
profile
6 Inch/metric conversion ● input
Controlled 62 Canned cycle for drilling ●
7 axis Stored stroke check 1 ●
63 Coordinate system shift ●
8 Stored stroke check 2,3 ●
64 Direct input of coordinate ●
9 Stored limit check before ○ system shift
move
65 Pattern data input ○
10 Chamfering on/off ●
Unexpected disturbance 66 EZ Guidei(Conversational X
11 ● Programming Solution)
torque detection function Operation
12 Position switch ● 67 Guidance MANUAL GUIDE 0i ○
Included in Function iHMI with Machining Cycle X
13 DNC operation RS232C ● 68 EZ Operation package X
interface.
69 Constant surface speed
14 DNC operation with memory ● control
●
card Auxiliary/
15 Quick program restart X 70 Spindle Spindle override 0 - 150% ●
16 Tool retract and recover ○ 71 speed Spindle orientation ●
72 function Rigid tap
17 Manual intervention and ○
●
return 73 Arbitrary speed threading ○
Operation
18 Wrong operation prevention ●
74 Tool function T2 +2 digits
19 Dry run ●
75 Tool offset pairs 128-pairs ●
20 Single block ●
76 Tool offset pairs 200-pairs ○
21 Reference position shift ●
22 Handle interruption ○ 77 Tool offset ●
Tool
23 Incremental feed x1,x10,x100 ● 78 function/ Tool radius/Tool nose radius ●
Tool compensation
24 Manual handle retrace ○
25 Active block cancel X 79 compen- Tool geometry/wear ●
sation compensation
26 Nano interpolation ●
80 Automatic tool offset G36/G37 ○
27 Linear interpolation ●
28 Circular interpolation ● 81 Direct input of offset value ○
measured B
29 Polar coordinate interpola- X
tion 82 Tool life management ●
30 Cylindrical interpolation X Backlash compensation for
83 Accuracy each rapid ●
31 Helical interpolation X compen- traverse and cutting feed
Thread cutting, synchro- sation
32 ●
function Stored pitch error compen-
Interpola- nous cutting 84
sation
○
33 tion Multi threading ●
34 functions Thread cutting retract ● Part program storage size & 5120M(2MB )
85 Number of registerable _ 1000 ●
35 Continuous threading ● programs programs
36 Variable lead thread cutting ● Part program storage size & 1280M
37 Skip G31 ● 86 Number of registerable (512KB) _ X
Input signal programs 400 programs
38 High-speed skip ○ Editing
is 8 points. operation Part program storage size & 5120M(2MB)
39 2nd reference position return G30 ● 87 Number of registerable _ 400 X
3rd/4th reference position programs programs
40 ●
return 88 Program protect ●
41 Override cancel ● 89 Password function ●
42 Manual per revolution feed ● 90 Playback ●
43 AI contour control I ○
91 Setting Status display ●
44 Feed AI contour control II X and
function Bell-type acceleration/ Included in 92 display Main menu screen X
45 deceleration before look AI contour ○ Reader/
ahead interpolation control I or II 93 Reader/puncher interface puncher (Ch.1) ●
46 Rapid traverse block overlap ● interface
47 Optional block skip 9 pieces ○ 94 Fast data server X
Combined 95 Data External data input ●
48 Absolute/incremental use in the ● input/
programming Memory card input/
same block 96 output ●
output
49 Diameter/Radius program- ●
ming 97 USB memory input/ ●
Automatic coordinate output
50 ●
system setting 98 Automatic data backup ●
51 Workpiece coordinate G52 - G59 ● 99 Interface Embedded Ethernet ●
Program system
input 100 function Fast Ethernet X
52 Workpiece coordinate ●
system preset 10.4" color
101 Display unit ●
LCD
53 Direct drawing dimension ●
programming 102 PMC ladder function 8000 steps ●
54 G code system A/B/C ● Robot interface with PMC
103 Others ○
55 Chamfering/Corner R ● I/O module
56 Custom macro ●
104 Robot interface with X
57 Addition of custom macro #100 - #199, ● PROFIBUS-DP
common variables #500 - #999
06 / 07
Major Specifications
*{ } : Option
www.doosanmachinetools.com
Head Office Doosan Machine Tools Europe Doosan Machine Tools China
22F T Tower, 30, Sowol-ro 2-gil, Jung-gu, Emdener Strasse 24, D-41540 Dormagen, Room 101,201,301, Building 39 Xinzhuan
Seoul, Korea, 04637 Germany Highway No.258 Songjiang District,China
Tel +82-2-6972-0370 / 0350 Tel +49-2133-5067-100 Shanghai(201612)
Fax +82-2-6972-0400 Fax +49-2133-5067-111 Tel +86 21-5445-1155
Fax +86 21-6405-1472
Doosan Machine Tools America Doosan Machine Tools India
19A Chapin Rd., Pine Brook, NJ 07058, U.S.A. No.82, Jakkuar Village, Yelahanka Hobil,
Tel +1-973-618-2500 Bangalore-560064
Fax +1-973-618-2501 Tel + 91-80-2205-6900
E-mail india@doosanmt.com
Fire Safety There is a high risk or fire when using non-water-soluble cutting fluids, processing flammable materials, neglecting use coolants and modifying
Precautions the machine without the consent of the manufacturer. Please check the SAFETY GUIDANCE carefully before using the machine.
ver. EN 200605 SU