Professional Documents
Culture Documents
ED8C939-10
Issue 8
15-February-2007
A A
About This Drawing
This document provides application engineering details and ordering codes for
Metropolis® AMU. Specifications and application considerations are included to properly
engineer the network element for desired functionality, as well as condition the location for proper
operation and maintenance.
The most current Issue of this drawing can be obtained in paper format or electronically
downloaded from the Alcatel- Lucent Corporate Information Center (CIC) by specifying the
drawing number.
Associated References
365-312-847 Application and Planning Guide
365-312-850 User Operations Guide
365-374-849 Alarm and Trouble Clearing Guide
365-312-848 Installation Guide
365-312-854 Provisioning Guide
ED8C939-20 Interconnect Information
ED8C939-10 Issue 8 A2
Table of Contents
Sheet Updated
Description of Sheet
Number This Issue
Title Sheet A1 *
About This Drawing A2
Reason for Re-issue A2 *
Table of Contents A3
Engineering Notes A4 *
Table A - Equipment and Mounting hardware B1
Table B - Main boards and Option Boards B1
Table C - Small Formfactor Pluggable (SFP) Modules B2 *
Table D - Cables B3 *
Table E - 45 Degree Rotating Boot LC Single Mode Fiber Jumpers B5
Table F - 45 Degree Rotating Boot LC Multi-Mode Fiber Jumpers B6 *
Table G - Software B7 *
Floor Plan Data - Metropolis® AMU C1
Figure 1 - Subrack Options D1
Figure 2 - Subrack Mounting Brackets D2
Figure 3 - Main Cards D3
Figures 4-6 - Adapter and Option Cards D4
Figures 7-8 - Adapter and Option Cards D5
Total Sheets 17
ED8C939-10 Issue 8 A3
Engineering Notes
1. For Lucent Engineered orders, job information shall be recorded by comcode number in the regional wiring
lists.
3. Some CWDM SFP’s are available but require Product Management approval and have extended lead
times.
4. SFP Modules are used in 4 slots in the Main Board. Two multirate ports accept either STM-1 or STM-4 SFP
Modules.
5. The Adapter Card is used to install one AMS (Legacy) cards into the AMU Subrack. Two AMU slots are
required for each Adapter card.
7. The heat baffle must be installed when equipment is installed above or below the Metropolis® AMU.
8. The maximum number of systems 2m/4o (Two Main Slots/ Four Option Slots) and 1m/1o (One Main Slot/
One Option Slot) mountable in a rack depends on the Rack height:
9. Rack mounting kits are required for either ETSI or 19 Inch racks. Mounting kits accommodate a maximum of
either 2 2m/4o or 5 1m/1o.
10. Power and interconnect cable lengths must be specified during a site inspection. Cables must be built or
ordered separately for Power, Ground, Station Clock, LAN, CIT, MDIO, EOW, and External electrical and
optical signal cables. See ED8C939-20 or the installation guide for cable requirements. A site survey is
required for determining proper cable lengths.
11. When ordering Fiber Optic jumpers for connection to the SFP modules, 45 Degree rotating boot LC
connectors must be used on the Metropolis AMU side. Order jumpers based on length and opposing end
requirements. See Table E and F
12. The STM-1e SFP module requires 1.0/2.3 RF connectors and mini-coax cable for connection to external
equipment. See table D for pre-fabricated cables
13. Kits for horizontal mounting may be used with ASC102B 1m/1o subrack only.
14. For custom length power cables, 408887883 terminal block and 408887875 strain relief are included.
Power cable size must be calculated based on the length and the acceptable voltage drop specified by
local electric codes. For connection to the PDP (Power Distribution Panel), order the prefabricated cables
listed in Table D.
15. The SI-14/8 option card has 8 SFP ports. Ports 1 and 5 may be used for STM-1 or STM-4 SFP’s listed in
Table C. Ports 2,3,4,6,7 and 8 may only use STM-1 SFP’s. If Slot 1 or Slot 5 is occupied by an STM-4 SFP,
slots 2-4 and 6-8 become inactive respectively.
16. The Short Range Gigabit Ethernet SFP Module (SX) requires Multi-Mode fiber. See Table F.
ED8C939-10 Issue 8 A4
B
Features
ED8C939-10 Issue 8 B1
Features
ED8C939-10 Issue 8 B2
Features (continued)
Table D - Cables
Description Rel Comcode
9p D-Sub to RJ45 (S-FTP) 4 meters 1.0 848069795
CIT Interface Cables
9p D-Sub to RJ45 (Cat5e) 4 meters 1.0 408069795
0.50 meters 1.0 408960706
DC Power Cable (3x1.5mm2)
1.0 meters 1.0 408960714
Shelf to PDP
2.5 meters 1.0 408960722
Subrack to Rack Ground Cable
.20 meters 1.0 408883106
(1x2.5mm2)
25p D-sub 2.5 meters 1.0 408882819
25p D-sub 10 meters 1.0 408882827
MDIO Interface Cables
25p D-sub 15 meters 1.0 408882835
25p D-sub 25 meters 1.0 408882843
V11 EOW Cable 15p D-sub 2 meters 1.0 408882801
RJ-45 2 meters 1.0 408882892
RJ-45 5 meters 1.0 408882900
Station Clock Cable RJ-45 10 meters 1.0 408882918
(75 Ohm 2 fold Coax) RJ-45 15 meters 1.0 408882926
RJ-45 50 meters 4.0 848771739
RJ-45 100 meters 4.0 848771747
RJ-45 2 meters 1.0 408882660
RJ-45 5 meters 1.0 408882678
Station Clock Cable
RJ-45 10 meters 1.0 408882686
(120 Ohm S-ftp)
RJ-45 15 meters 1.0 408882694
RJ-45 30 meters 4.0 408956688
RJ-45 1 meter 1.0 408882751
RJ-45 2 meters 1.0 408882769
G-lan and Q-lan
RJ-45 5 meters 1.0 408882777
(100 Ohm S-FTP 5.4 mm Jacket)
RJ-45 10 meters 1.0 408882785
RJ-45 15 meters 1.0 408882793
2 x RJ-45 2 meters 1.0 408882850
P1-E1/63 75 Ohm 2 x RJ-45 5 meters 1.0 408882868
(75 Ohm 8 fold Coax) 2 x RJ-45 10 meters 1.0 408882876
2 x RJ-45 15 meters 1.0 408882884
RJ-45 1 meters 1.0 408882702
P1-E1/63 100 Ohm RJ-45 2 meters 1.0 408882710
(High Density) RJ-45 5 meters 1.0 408882728
(100 Ohm S-FTP 4.4 mm Jacket) RJ-45 10 meters 1.0 408882736
RJ-45 15 meters 1.0 408882744
RJ-45 2 meters 1.0 408882660
P1-E1/63 120 Ohm RJ-45 5 meters 1.0 408882678
(120 Ohm S-FTP) RJ-45 10 meters 1.0 408882686
RJ-45 15 meters 1.0 408882694
ED8C939-10 Issue 8 B3
Features (Continued)
Table D - Cables
Description Rel Comcode
RJ-45 1 meter 1.0 408882751
RJ-45 2 meters 1.0 408882769
X16DS1
RJ-45 5 meters 1.0 408882777
(100 Ohm 5.4 mm Jacket)
RJ-45 10 meters 1.0 408882785
RJ-45 15 meters 1.0 408882793
RJ-45 2 meters 1.0 408882660
X16E1 RJ-45 5 meters 1.0 408882678
(120 Ohm S-FTP) RJ-45 10 meters 1.0 408882686
RJ-45 15 meters 1.0 408882694
RJ-45 2 meters 2.0 408882934
X16E1 RJ-45 5 meters 2.0 408882942
(75 Ohm 2 fold Coax) RJ-45 10 meters 2.0 408882959
RJ-45 15 meters 2.0 408883967
1.6/5.6 Angle Connector 2 meters 2.0 408882975
1.6/5.6 Angle Connector 5 meters 2.0 408882983
X2E3/X2DS3
1.6/5.6 Angle Connector 10 meters 2.0 408882991
(75 Ohm Single Coax)
1.6/5.6 Angle Connector 15 meters 2.0 408883007
1.6/5.6 Angle Connector 20 meters 2.0 408883015
1.6/5.6 Angle Connector 2 meters 2.0 408883023
1.6/5.6 Angle Connector 5 meters 2.0 408883031
X2E3/X2DS3
1.6/5.6 Angle Connector 10 meters 2.0 408883049
(75 Ohm 8 fold Coax)
1.6/5.6 Angle Connector 15 meters 2.0 408883056
1.6/5.6 Angle Connector 20 meters 2.0 408883064
1.0/2.3 Mini-Coax 5 meters 2.0 408939205
STM 1e 1.0/2.3 Mini-Coax 10 meters 2.0 408939213
For STM1E SFP’s
1.0/2.3 Mini-Coax 15 meters 2.0 408939221
1.0/2.3 Mini-Coax 20 meters 2.0 408939239
ED8C939-10 Issue 8 B4
Features (Continued)
ED8C939-10 Issue 8 B5
Features (continued)
45° LC To SC 45° LC To ST
(1 Cable) (1 Cable)
5 (16.4) 109162636 109163097
10 (32.8) 109162651 109163105
15 (49.2) 109162669 109163113
20 (65.6) 109162677 109163121
25 (82) 109162685 109163139
30 (98.4) 109162693 109163147
35 (114.8) 109162701 109163154
40 (131.2) 109162719 109163162
45 (147.6) 109162727 109163170
50 (164) 109162743 109163188
55 (180.4) 109162750 109163196
60 (196.8) 109162768 109163204
65 (213.2) 109162776 109163212
70 (229.6) 109162784 109163238
75 (246) 109162792 109163246
80 (262.4) 109162800 109163253
85 (278.8) 109162818 109163261
90 (295.2) 109162826 109163279
95 (311.6) 109162842 109163287
100 (328) 109162859 109163295
ED8C939-10 Issue 8 B6
Features (continued)
Table G - Software
Description Comcode Remarks
AMU Release 1.0.1 Software and SRD 109509471 Status DA
AMU Release 1.0 Software and SRD 109509463 Status DA
AMU Release 2.0.2 Software 109579490
AMU Release 2.0.3 Software 109584631
System Software AMU Release 2.0.4 Software 109606285
AMU Release 2.1 Software 109616383
AMU Release 3.0 Software 109579870
AMU Release 4.0 Software 109599837
AMU Release 4.1 Software 109620377
ED8C939-10 Issue 8 B7
Floor Plan Data - Metropolis® AMU
ED8C939-10 Issue 8 C1
D
Control Slot
ED8C939-10 Issue 8 D1
Figure 2 - Subrack Mounting Brackets
Mounting Hardware
Rack Mounting
Bracket Kit
ED8C939-10 Issue 8 D2
Figure 3 - Main Cards
BATT 1
BATT 2
Q-Lan CIT
G-Lan
Station
Clock
EOW
Engineering
Order Wire
RESET
MDIO
USB1
USB2
STM-1/4 STM-4/16
SFP SFP
Slots Slots
1 and 2 1 and 2
STM-1 STM-1/4
SFP SFP
Slots Slots
3 and 4 3 and 4
ED8C939-10 Issue 8 D3
Figures 4-6 - Adapter and Option Cards
Adapter Card
2.2 2.2
2.3 2.3
2.4 2.4
RJ45
Female
4X
2.5
2.6
2.8
ED8C939-10 Issue 8 D4
Figures 7-8 - Adapter and Option Cards
DIN
1 1.6/5.6
Female
2 4X
3 IN
4
TP2.1
5
RJ45 OUT
6 Female
16X
7
10
11 IN
12 TP2.2
13
OUT
14
15
16
ED8C939-10 Issue 8 D5