Professional Documents
Culture Documents
2007 Centrifugal Fans and Blowers
2007 Centrifugal Fans and Blowers
Printed in Germany
version 07
Centrifugal fans and blowers
version 07
Centrifugal fans and blowers
ebm-papst ebm-papst ebm-papst
Mulfingen GmbH & Co. KG St.Georgen GmbH & Co. KG Landshut GmbH
www.ebmpapst.com
information
General
Centrifugal fans and blowers – Company profile: ebm-papst
– Our key to success
– How to use this catalogue
– How to find your ebm-papst product
– How to order your ebm-papst product
AC centrifugal,
backward
AC centrifugal fans, backward curved 13
AC centrifugal,
integrating the external rotor motor into the impeller. "Blowers" refers to devices with scroll – Centrifugal blowers, forward curved and dual inlet
forward
housing, while centrifugal fans are shipped without scrolls.
Our complete range of blowers is available in AC and EC technology. Table of content EC centrifugal fans, backward curved 221
EC centrifugal,
EC centrifugal fans and blowers, forward curved 421
backward
– Centrifugal fans and blowers, forward curved and
single inlet
– Centrifugal blowers, forward curved and dual inlet
EC centrifugal,
– RS485 terminal box / hand-held control terminal
forward
– Speed setting
– LISA control software / fan control software
– HMS controller
Zubehör 549
– Inlet nozzles
EC-SYSTEMS
– Guard grilles
– Connection leads
– Capacitors
– Terminal boxes
– Air filters
– Speed setting
Accessories
More power Quiet movement – Motor protection switch
Centrifugal fans with backward curved blades Centrifugal fans and blowers with forward – Star-delta switch / repair switch
are used primarily for intake suction and do not curved blades always require a scroll housing.
require a scroll housing. They have high Their characteristic features are a low noise Technology 571
hydraulic efficiency. level, relatively small air flow with a high – Technical parameters & scope
Technology
application. – Motors
– Control technology
Contacts
2 3
General information 4
information
General
Centrifugal fans and blowers – Company profile: ebm-papst
– Our key to success
– How to use this catalogue
– How to find your ebm-papst product
– How to order your ebm-papst product
AC centrifugal,
backward
AC centrifugal fans, backward curved 13
AC centrifugal,
integrating the external rotor motor into the impeller. "Blowers" refers to devices with scroll – Centrifugal blowers, forward curved and dual inlet
forward
housing, while centrifugal fans are shipped without scrolls.
Our complete range of blowers is available in AC and EC technology. Table of content EC centrifugal fans, backward curved 221
EC centrifugal,
EC centrifugal fans and blowers, forward curved 421
backward
– Centrifugal fans and blowers, forward curved and
single inlet
– Centrifugal blowers, forward curved and dual inlet
EC centrifugal,
– RS485 terminal box / hand-held control terminal
forward
– Speed setting
– LISA control software / fan control software
– HMS controller
Zubehör 549
– Inlet nozzles
EC-SYSTEMS
– Guard grilles
– Connection leads
– Capacitors
– Terminal boxes
– Air filters
– Speed setting
Accessories
More power Quiet movement – Motor protection switch
Centrifugal fans with backward curved blades Centrifugal fans and blowers with forward – Star-delta switch / repair switch
are used primarily for intake suction and do not curved blades always require a scroll housing.
require a scroll housing. They have high Their characteristic features are a low noise Technology 571
hydraulic efficiency. level, relatively small air flow with a high – Technical parameters & scope
Technology
application. – Motors
– Control technology
Contacts
2 3
Company profile: ebm-papst
The entire scope of ventilation and drive technology: this is the world of ebm-papst. More than 9,800 people – in
Germany and throughout the world – develop, produce and sell our motors and fans. Our global presence and
our unique range of products based on a quality standard that surpasses every other have made us what we are:
world market leader in motors and fans. Expertly knowing what our customers need and incessantly striving
to arrive at the perfect application solution for a wide variety of different industries is what determines our daily
work. Those who know us know the high standards we apply to our work and know our creed: to be as close
to our customers as possible and to simply be the best in terms of innovation and reliability.
4
information
General
AC centrifugal,
backward
AC centrifugal,
Left:
Our location in St. Georgen
forward
Right:
Our location in Landshut
Our history – Our drive clearance for serial production only after all the
EC centrifugal,
Rooted in ebm, PAPST and mvl, the three leading innovators in the desired characteristics have been determined to
backward
development and production of motors and fans, ebm-papst has be just right.
established itself as the world market leader. Now as ever, our legendary Environmental care is another priority with
inventive spirit shines through in products that set standards in many ebm-papst. This is why we have developed
segments of industry worldwide. We are proud to say that despite difficult ou product line in EC technology, which makes
EC centrifugal,
employees around the world put their passion and dedication to work throughout the world, you need strong partners.
forward
for you. Global Domestic – i.e. being present all over the
world and being a national company in each
Passionately involved in R&D individual country – is how we have established
Our catalogues just list the results of our incessant efforts in R&D: ourselves in all important markets on this globe
products of highest quality and reliability. After all, it is our passion to with our successful subsidiaries. And so you will
EC-SYSTEMS
constantly try something new and improve what we have. In doing so, always find ebm-papst close to home, speaking
we take advantage of the latest development methods and state-of- your language, and knowing the demands of
the-art technology and invest quite heavily in R&D facilities. Best of all, your markets. Besides, our worldwide produc-
though, we rely on excellently trained and skilled engineers and tion alliance serves as a basis for competitive
technicians to be at your service in R&D and Sales & Distribution. pricing. Our global services and logistic outlets,
i.e. IT networking, safeguard short reaction
Accessories
Producing and safeguarding high-quality products and services times and just-in-time delivery.
This is our promise without any compromise. Whether produced in one of
our five factories in Germany or one of our eleven international production All our efforts are documented in a comprehen-
sites, our products always have the same high level of quality. This quality sive quality management system, both for prod-
control is something you can definitely rely on! And this across all levels ucts and services. Being certified as complying
of production and throughout all processes: consulting customers, devel- with the tough requirements of the international
opment, material selection through to picking certified, choice suppliers standards DIN EN ISO 9001, ISO/TS 16949-2
Technology
and on to the production of parts and final delivery. On top of this, our and of standard DIN EN ISO 14001 is just one
products have to pass the most rigourous tests under all realistic operat- seal of approval we have received for our
ing conditions: continuous stress test, salt spray test, vibration test, or unceasing efforts to provide only the best
precision noise measuring, just to mention a few. And the product gets quality products and services.
Contacts
5
Our key to success
Our innovations and technologies keep on turning into new industrial standards. This competitive capability can
only be maintained by seeing ventilation as a whole: the interrelationship between, and thus the system of, motor
engineering, aerodynamics, and electronics. These are our three core competencies, imminently connected and
linked in each of our products. And so we handle air intelligently and quietly and continue to set new standards in
drive technology. Our system solutions form the main part of our product range by now. And they will be our main
key to success.
Motor engineering, aerodynamics, electronics Finally, intelligence will become the decisive
Our drive is well known and famous with specialists: our external-rotor factor on all markets in future. After all, only in
motor, which has made us world market leader – quietly, yet powerfully. connection with electronics can drive and air
Being versatile as to integration, it is ideally suited to the most diverse flow – as a system solution – have an optimal
applications. Based on this principle, we here at ebm-papst have devel- effect in a product or application. Interfaces are
oped the widest range of fans and motor types in the world. And for hot avoided, and thus potential faults and failures.
or aggressive blower mediums, the internal-rotor motor is the perfect
complement. Setting new standards with EC technology
Wherever intelligent air handling is required,
Still, in drive engineering, certain applications simply require the internal- where energy consumption needs to be reduced
rotor motor principle, and they are then realised with our motors specifi- and performance has to be maximised, there
cally developed for such cases. Take, for instance, the steering support our EC motors are your reliable answer. They do
motor in the automotive field developed as innovation in active steering. not waste financial or natural resources.
Instead, they boost high efficiency, continuous
Be it axial or centrifugal fans, centrifugal blowers, compact fans or controllability via analogue or digital inputs,
tangential blowers: we always design fan blades, impeller blades and long and maintenance-free service life, and
ducted housings with the specific application in mind. We strive to robustness.
minimise noise and to optimise efficiency. This is the challenge that
we have taken up and which we meet – working away powerfully
and quietly.
6
information
General
AC centrifugal,
backward
AC centrifugal,
Left: Endurance test room
forward
Centre: Shaker
Right: Measurement station
EC centrifugal,
backward
ward for clean rooms
EC centrifugal, back-
Top: Betz manometer
Left: Precision noise measurement lab
EC centrifugal,
forward
– EC fan units for clean room technology.
As the electronics are integrated and the unit
is wired up completely and ready to plug in,
there is no need for our customers to waste
EC-SYSTEMS
time and money on laborious wiring work.
– Sensitive EC sensor fans for the automotive
Without any problems, the ebm-papst EC technology allows you to realise industry providing optimal selection of the
networked, bus-linked appliances, to integrate simple or complex controls air-conditioning unit in the car and, combined
at low cost and to also realise time and again new, customised and with booster blowers, individual air-condition-
complete solutions. Here, ebm-papst excels as competent development ing of each and every passenger seat.
Accessories
partner, with our experience of more than 25 years and our excellent – EC gas blowers with commutation and
know-how in R & D and production also being well documented in a few control electronics including a processor.
hundred national and international patents. And there is also our ability They are developed in such a way as to
to listen intently, to pay good attention to our customers and their make the blower premix the required amount
demands – in order to come up with new and pioneering ideas, such as: of air with the gas. Aerodynamics with these
blowers are adjusted in such a way as to
make these blowers ideal for use in very
Technology
7
How to use this catalogue
Headline
The headline indicates which technology (AC or EC), which design AC centrifugal fans
(centrifugal, axial, etc.), and which line (e.g. S-Range) the product belongs backward curved, 3-D, Ø 400
to. Impeller diameter or other features are also indicated. – Material: Impeller: Sheet aluminium, joined by tabs
Rotor: Coated in black
– Number of blades: 6
– Direction of rotation: Clockwise, seen on rotor
– Type of protection: IP 54 (acc. to EN 60529)
– Insulation class: "F"
– Mounting position: Any
– Condensate discharges: None
– Mode of operation: Continuous operation (S1)
Part designation / Type – Bearings: Maintenance-free ball bearings
Electr. connection
Nominal voltage
123 4 5 6 7
Speed/rpm (1)
part number:
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
D – centrifugal blower, dual inlet (with scroll housing) A 1 1350 370 1.75 64
[Pa]
[in H O]
2
600
B 2 1390 430 2.17 68
M – motor
2,0
500
P – pumps 400 2 2
1,5
200 1 1
3) Type of motor B
0,5
A
100
D – 3-phase motor
E – single-phase motor with capacitor
0 500 1000 1500 2000 2500 [CFM]
50 Hz 60 Hz
G – EC motor
56
S – shaded-pole motor
Q – square shaded-pole motor
4) Impeller diameter in mm What a product page is made up of (reduced scale - 50%)
8
information
General
AC centrifugal,
backward
AC centrifugal,
forward
Product description
information
Depending on the product, information is provided here on the following:
General
EC centrifugal,
backward
material, number of blades, direction of air flow, direction of rotation,
– Motor protection: Design with thermal overload protector
system of protection, insulation class, mounting position, condensate
AC centrifugal,
– Protection class: I (acc. to EN 61800-5-1) discharge holes, mode of operation, design, bearing, technical equipment,
– Product conforming to standard: CE
EMC, leakage current, motor protection, electrical connection, cable exit,
protection class, capacitor, product conforming to standards, approvals
and options.
forward
EC centrifugal,
centrifugal fan
backward
Nominal data
Mass of
R4E 400-AR05 -06 7.1 141.0 172.0 128.0 50.0 90.0 54476-2-4013
R4E 400-AP17 -06 8.8 164.0 193.0 148.0 70.0 113.0 54476-2-4013 AC products (from motor size 094) and EC products (AC-fed):
EC centrifugal,
In operating point at maximum load
forward
c ±1 66
EC centrifugal,
forward
5 d ±1 22
50
11
90
EC-SYSTEMS
e
Ø 257
Ø 124
Ø404
Ø 370
Ø268
All drawings represent the design principle and are not to scale.
EC-SYSTEMS
M6
Dimensions are either given in the product drawing or, with varying
0
45˚
60
g Depth of screw
Brass lead tips max. 12 mm
b
Mounting dimensions
Ø7
Technology
5
10
0
Accessories
The pages indicated at the bottom refer to the accessories, e.g. inlet
55
28
nozzles, guard grilles, wall rings, etc. for this particular product,
as well as additional information (e. g. the connection diagram).
Contacts
57
Inlet nozzle Guard grille Capacitor Electr. connections
p. 550 p. 553 p. 560 f. p. 596 f.
Technology
9
How to select your ebm-papst product
Selecting a fan
The following diagram shows the range of characteristic curves for the
most important fan designs and serves as a helpful tool in preselecting
a design on the basis of air flow and back pressure.
axial fans
centrifugal fans, backward curved
1200 centrifugal blowers, single inlet
centrifugal blowers, dual inlet
1000 diagonal fans
800
600
400
200
10
information
General
How to order your ebm-papst product
AC centrifugal,
backward
AC centrifugal,
Have you found the suitable ebm-papst product and would like to order it now?
forward
In this case, simply contact your nearest ebm-papst sales office by E-mail, fax or phone.
Don't know exactly which ebm-papst product you need to order? Checklist
EC centrifugal,
In this case, simply contact your nearest ebm-papst sales office by
backward
E-mail, fax or phone. Our specialists in ventilation and drive technology – Part designation / type
are always there to help you find the best solution for your specific – Quantity needed
application. – Field of application
– Ambient conditions (humidity, temperature, climate)
EC centrifugal,
where to the delivery will be made.
forward
We deliver:
– Ex works (excluding packaging)
– Via freight carrier (we also use postal services for shipments
up to 30 kg)
EC-SYSTEMS
All the other details such as packaging, freight, insurance and customs
duty will be settled with your ebm-papst contact prior to the time we
issue our order confirmation.
Using the questions provided in the checklist here as a guideline, you can
Technology
make sure your ebm-papst contact has all the necessary information to
handle your enquiry as efficiently and quickly as possible.
Contacts
11
12
information
General
AC centrifugal fans backward curved
AC centrifugal,
backward
AC centrifugal fans with plastic impeller Ø 133 - Ø 355 14
AC centrifugal,
forward
AC centrifugal fans with aluminium impeller Ø 310 - Ø 630 44
EC centrifugal,
backward
ward for clean rooms
EC centrifugal, back-
EC centrifugal,
forward
EC-SYSTEMS
Accessories
Technology
Contacts
13
AC centrifugal fans
backward curved, Ø 133
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
A 1 2680 25 0.11
[Pa]
[in H O]
2
200
160
0,6
120
0,4
2 2
80
0,2
1 1
40
A B
50 Hz 60 Hz
14
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Variable
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC, GOST
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Dimensions
Inlet nozzle
Centrifugal fan kg c (long)
c ±1
EC centrifugal,
53,6 ±0,5 13 Ø58 ±0,2
forward
8
EC-SYSTEMS
Ø92,8
Ø133
Ø129
15
Ø72
Ø87
27,5
M4
Accessories
6
60 41
±2
0 2
300 60,6 Depth of screw
max. 5 mm
Technology
Contacts
15
Inlet nozzle Capacitor Electr. connections
p. 550 p. 560 f. p. 596 f.
AC centrifugal fans
backward curved, Ø 133
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
A 1 2720 38 0.27
[Pa]
[in H O]
2
200
160 A
0,6
120
0,4
80
0,2
40
50 Hz 60 Hz
16
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Axial
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
91±1
58 ±0,5 13 Ø58 ±0,2
EC centrifugal,
forward
8
Ø92,8
Ø133
Ø129
20
Ø72
Ø87
EC-SYSTEMS
28,5
M4
6
60
Accessories
41
±2
0 2
300 60,6 Depth of screw
max. 5 mm
Technology
Contacts
17
Inlet nozzle Electr. connections
p. 550 p. 596 f.
AC centrifugal fans
backward curved, Ø 175
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
A 1 2600 51 0.25
[Pa]
[in H2O]
A 2 2530 53 0.26
350 B 1 2240 54 0.27
B 2 2120 56 0.28
1,25
300
1,0
250
200
0,75
150 2
0,5
2 A
100
B
0,25
50 1 1
50 Hz 60 Hz
18
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: A variable, B axial
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC, B also GOST
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Dimensions
Inlet nozzle
Centrifugal fan kg c l (long)
c ±1
14
EC centrifugal,
61,5 ±0,5 Ø 58 ±0,2
forward
10
20
EC-SYSTEMS
Ø125,5
Ø131
Ø175
Ø 170
Ø72
90˚
27,5
M4
Accessories
42
Brass lead tips Depth of screw
62 2
max. 5 mm
Technology
Contacts
19
Inlet nozzle Capacitor Electr. connections
p. 550 p. 560 f. p. 596 f.
AC centrifugal fans
backward curved, Ø 190
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
A 1 2490 59 0.26
[Pa]
[in H O]
2
A 2 2410 61 0.27
400
1,5
300
1,0
200
2
0,5
100
50 Hz 60 Hz
20
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Variable
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC, GOST
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
68,5±1
14
62,7±0,5 Ø 58 ±0,2
EC centrifugal,
10
forward
2
Ø27±0,1
15
Ø125,5
Ø131
Ø190
Ø 170
Ø92
90˚
27
EC-SYSTEMS
0
45
44,6 M4
Brass lead tips Depth of screw
62,8 2
Accessories
max. 5 mm
Technology
Contacts
21
Inlet nozzle Capacitor Terminal box Electr. connections
p. 550 p. 560 f. p. 562 p. 596 f.
AC centrifugal fans
backward curved, Ø 220
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
A 1 2390 95 0.42
[Pa]
[in H O]
2
A 2 2490 90 0.40
B 1 2650 96 0.43
2,0
400
1,5
300 2 2
1,0
200
A B
0,5
100 1 1
50 Hz 60 Hz
22
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Variable
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC, GOST
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Dimensions
Inlet nozzle
Centrifugal fan kg d e (long)
71±1
21
EC centrifugal,
d ±0,5 Ø 58 ±0,2
forward
22
2
Ø 27±0,1
EC-SYSTEMS
Ø155
Ø220
Ø159
Ø252
Ø 92
90˚
27
0
45
M4
Accessories
44
Brass lead tips Depth of screw
63 2
max. 5 mm
Technology
Contacts
23
Inlet nozzle Capacitor Terminal box Electr. connections
p. 550 p. 560 f. p. 562 p. 596 f.
AC centrifugal fans
backward curved, Ø 225
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
[in H O]
2
600
B 2 2670 124 0.55
2,0
500
400 2
1,5
300 2
1,0
200
0,5
100 1 1
A B
50 Hz 60 Hz
24
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Variable
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC, B also GOST
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Dimensions
Inlet nozzle
Centrifugal fan kg b c g (long)
c ±1
28
EC centrifugal,
83 ±0,5 Ø 58 ±0,2
forward
25
2
Ø 27±0,1
35
EC-SYSTEMS
Ø153
Ø225
Ø146
Ø223
Ø 92
90˚
27
0
45
M4
Accessories
g
Brass lead tips Depth of screw
b 2
max. 5 mm
Technology
Contacts
25
Inlet nozzle Capacitor Terminal box Electr. connections
p. 550 p. 560 f. p. 562 p. 596 f.
AC centrifugal fans
backward curved, Ø 225
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
[in H O]
2
600
B 2 1400 43 0.21
2,0
500
400 2
1,5
A
300
1,0
200
0,5
100 2 1
B
50 Hz 60 Hz
26
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: A variable, B axial
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Dimensions
Inlet nozzle
Centrifugal fan kg d e (long)
99 ±1
28
EC centrifugal,
d ±0,5 Ø 58 ±0,2
forward
25
2
Ø 27±0,1
EC-SYSTEMS
Ø153
Ø225
Ø146
Ø223
Ø 92
90˚
27
0
45
M4
Accessories
62,6
Brass lead tips Depth of screw
89,3 2
max. 5 mm
Technology
Contacts
27
Inlet nozzle Capacitor Terminal box Electr. connections
p. 550 p. 560 f. p. 562 p. 596 f.
AC centrifugal fans
backward curved, Ø 250
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
[in H O]
2
500
400 2 2
1,5
300
1,0
B
200
C 1
1
0,5
2
100
50 Hz 60 Hz
28
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: A B variable, C axial
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC, A C also GOST
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Dimensions
Inlet nozzle
Centrifugal fan kg b c d e g k (long)
R2E 250-AV65 -01 2.6 73.3 89.0 83.0 35.0 45.0 27.0 96359-2-4013
R4E 250-AH01 -05 2.2 84.3 99.0 72.6 25.0 56.0 29.0 96359-2-4013
EC centrifugal,
forward
c ±1
31
d ±0,5 Ø 58 ±0,2
28
2
Ø 27±0,1
EC-SYSTEMS
e
Ø 164,5
Ø 172
Ø 255
Ø 250
Ø 92
90˚
k
0
45
6
Accessories
g M4
Brass lead tips Depth of screw
b 2
max. 5 mm
Technology
Contacts
29
Inlet nozzle Capacitor Terminal box Electr. connections
p. 550 p. 560 f. p. 562 p. 596 f.
AC centrifugal fans
backward curved, Ø 310
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
[in H O]
A
2
300
1,0
200 2
0,5
100
50 Hz 60 Hz
30
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Axial
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
Depth of screw
max. 5 mm
154±1
53
EC centrifugal,
forward
58 ±0,2
30
2 97,5 ±1 M4
60
42
Ø 192
Ø 300
Ø 203
Ø 318
Ø 92
EC-SYSTEMS
27
6
85
450 ±20 Accessories
101 2
132
Technology
Contacts
31
Inlet nozzle Guard grille Capacitor Terminal box Electr. connections
p. 550 p. 553 p. 560 f. p. 562 p. 596 f.
AC centrifugal fans
backward curved, Ø 330
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
[in H O]
A
2
300
1,0
200 2
0,5
100
1
50 Hz 60 Hz
32
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Variable
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
Depth of screw
max. 10 mm
144±1
60
EC centrifugal,
forward
90 ±0,2
54
5 104 ±1 M6
28
35
Ø 75 ±0,1
Ø 224
Ø 350
Ø 237
Ø 360
Ø 102
EC-SYSTEMS
37
20
0±
45
6
85
Accessories
33
Inlet nozzle Capacitor Terminal box Electr. connections
p. 550 p. 560 f. p. 562 p. 596 f.
AC centrifugal fans
backward curved, Ø 355
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
[in H O]
2
C 1
C 2 835 77 0.36
300 A
B
1,0
2 2
200
0,5
100 2
1 1
C 1
50 Hz 60 Hz
34
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Variable
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Dimensions
Inlet nozzle
Centrifugal fan kg b c d e g (long)
R4E 355-AG01 -05 4.5 173.0 190.0 129.0 60.0 126.0 51357-2-4013
R6E 355-AB16 -05 4.0 173.0 190.0 104.0 35.0 126.0 51357-2-4013
EC centrifugal,
Depth of screw
forward
max. 10 mm
c ±1
60
90 ±0,2
54
5 d ±1 M6
EC-SYSTEMS
28
e
Ø 75 ±0,1
Ø 224
Ø 350
Ø 237
Ø 360
Ø 102
37
0
±2
0
45
Accessories
6
85
35
Inlet nozzle Capacitor Terminal box Electr. connections
p. 550 p. 560 f. p. 562 p. 596 f.
AC centrifugal fans
backward curved, Ø 250
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
[in H O]
2
400
1,5
A
300
1,0
200 1
0,5
100
50 Hz 60 Hz
36
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Variable
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
141±1
EC centrifugal,
58 ±0,2
31
forward
97,5 ±0,5
28
EC-SYSTEMS
42
Ø 27±0,1
Ø164,5
Ø 222
Ø172
Ø 250
Ø 255
Ø 92
90˚
27
0
±2
0
45
Ø
6
85
Accessories
37
Inlet nozzle Capacitor Terminal box Electr. connections
p. 550 p. 560 f. p. 562 p. 596 f.
AC centrifugal fans
backward curved, Ø 270
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
[in H O]
2
600
2,0
500 A
400 2
1,5
300
1,0
200 1
0,5
100
50 Hz 60 Hz
38
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Variable
backward
– Protection class: I
– Capacitor: FPU (P2) acc. to IEC 252
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
171±1
EC centrifugal,
90 ±0,2
35
forward
129 ±0,5
31
EC-SYSTEMS
60
Ø 75 ±0,1
Ø182,5
Ø 240
Ø 102
Ø191
Ø 270
Ø 280
90˚
37
0
±2
0
45
Ø
6
85
Accessories
39
Inlet nozzle Capacitor Terminal box Electr. connections
p. 550 p. 560 f. p. 562 p. 596 f.
AC centrifugal fans
backward curved, Ø 280
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
[in H O]
2
600
2,0
500
2
400
1,5
300 2
1,0
200 B
1 1
0,5
100
50 Hz 60 Hz
40
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Variable
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
Depth of screw
max. 10 mm
125 ±1
35
EC centrifugal,
forward
90 ±0,2
5 117 ±1 M6
31
48
Ø182,5
Ø90 ±0,1
Ø191
Ø281
Ø280
Ø102
EC-SYSTEMS
37
20
0±
45
6
85
Accessories
41
Inlet nozzle Terminal box Electr. connections
p. 550 p. 562 p. 596 f.
AC centrifugal fans
backward curved, Ø 280
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
[in H O]
2
600
2,0
500
400
1,5
300
1,0
200 B
2 1
0,5
100
50 Hz 60 Hz
42
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: A variable, B axial
backward
– Protection class: I
– Capacitor: A FPU (P2) acc. to IEC 252
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC, GOST
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Dimensions
Inlet nozzle
Centrifugal fan kg b d e g (long)
125 ±1
35
EC centrifugal,
d ±0,5 Ø 58 ±0,2
forward
31
2
Ø 27±0,1
e
Ø 182,5
EC-SYSTEMS
Ø 191
Ø 280
Ø 280
Ø 92
90˚
27
0
45
M4
Accessories
g
Brass lead tips Depth of screw
b 2
max. 5 mm
Technology
Contacts
43
Inlet nozzle Capacitor Terminal box Electr. connections
p. 550 p. 560 f. p. 562 p. 596 f.
AC centrifugal fans
backward curved, 3-D, Ø 310
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) °C p. 596 f.
n P1 I
Curves (established with long inlet nozzle) [rpm] [W] [A]
[in H O]
2
300
1,0
250
200 2 2
150
0,5
100 1 1
A B
50
50 Hz 60 Hz
44
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Axial
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Dimensions
Inlet nozzle Inlet nozzle
Centrifugal fan kg b c g (long) (short)
EC centrifugal,
c ±1 48
forward
Ø 58 ± 0,2
2 97,5 ±0,5 18
55,5
Ø27± 0,1
EC-SYSTEMS
42
Ø208,1
Ø318
Ø220
Ø211
Ø300
Ø92
90˚
27
6
450
2 M4
g
Depth of screw
b max. 5 mm
Technology
Contacts
45
Inlet nozzle Guard grille Terminal box Electr. connections
p. 550 p. 553 p. 562 p. 596 f.
AC centrifugal fans
backward curved, 3-D, Ø 310
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) °C p. 596 f.
n P1 I
Curves (established with long inlet nozzle) [rpm] [W] [A]
[in H O]
2
300
1,0
250
200 2 2
150 A
0,5
100 1 1
B
50
50 Hz 60 Hz
46
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Axial
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Dimensions
Inlet nozzle Inlet nozzle
Centrifugal fan kg b c g (long) (short)
EC centrifugal,
c ±1 48
forward
Ø 58 ± 0,2
2 97,5 ±0,5 18
55,5
Ø27± 0,1
EC-SYSTEMS
42
Ø208,1
Ø318
Ø220
Ø211
Ø300
Ø92
90˚
27
6
450
2 M4
g
Depth of screw
b max. 5 mm
Technology
Contacts
47
Inlet nozzle Guard grille Capacitor Terminal box Electr. connections
p. 550 p. 553 p. 560 f. p. 562 p. 596 f.
AC centrifugal fans
backward curved, 3-D, Ø 310
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) °C p. 596 f.
n P1 I
Curves (established with long inlet nozzle) [rpm] [W] [A]
A 1 950 46 0.21
[Pa]
[in H O]
2
A 2 925 50 0.23
B 1 885 53 0.24
B 2 900 51 0.23
150
0,5
100 2 2
0,25
50 1 1
A B
50 Hz 60 Hz
48
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Axial
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Dimensions
Inlet nozzle Inlet nozzle
Centrifugal fan kg b c g (long) (short)
EC centrifugal,
c ±1 48
forward
Ø 58 ± 0,2
2 97,5 ±0,5 18
55,5
Ø27± 0,1
EC-SYSTEMS
42
Ø208,1
Ø318
Ø220
Ø211
Ø300
Ø92
90˚
27
6
450
2 M4
g
Depth of screw
b max. 5 mm
Technology
Contacts
49
Inlet nozzle Guard grille Capacitor Terminal box Electr. connections
p. 550 p. 553 p. 560 f. p. 562 p. 596 f.
AC centrifugal fans
backward curved, 3-D, Ø 355
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) °C p. 596 f.
n P1 I
Curves (established with long inlet nozzle) [rpm] [W] [A]
[in H O]
A 1
2
300
1,0
2 2
C
200
B A
0,5
100 1 1
50 Hz 60 Hz
50
information
General
– Motor protection: A design with thermal overload protector, B C TOP wired internally
AC centrifugal,
– Cable exit: Variable
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Dimensions
Inlet nozzle Inlet nozzle
Centrifugal fan kg b c d e g (long) (short)
R4E 355-AK05 -05 4.7 146.5 167.0 117.0 48.0 96.0 35560-2-4013 35561-2-4013
R4E 355-AL02 -05 5.3 171.0 190.0 129.0 60.0 120.5 35560-2-4013 35561-2-4013
EC centrifugal,
forward
c ±1 60
Depth of screw
max. 10 mm
22 90 ±0,2
5 d ±1 ,5
70
M6
EC-SYSTEMS
44
45 Ø75 ±0,1
e
Ø 236,4
Ø 240
Ø 102
Ø 350
Ø250
Ø360
0
37
0 ±2
Accessories
6
85
2
Brass lead tips
g
b
Technology
Contacts
51
Inlet nozzle Capacitor Terminal box Electr. connections
p. 550 p. 560 f. p. 562 p. 596 f.
AC centrifugal fans
backward curved, 3-D, Ø 355
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) °C p. 596 f.
n P1 I
Curves (established with long inlet nozzle) [rpm] [W] [A]
A 1 860 71 0.32
[Pa]
[in H O]
2
A 2 850 73 0.33
B 1 785 80 0.35
0,8
160
0,6
120
0,4
2 2
80 B
0,2
1 1
40
50 Hz 60 Hz
52
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Variable
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: GOST
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Dimensions
Inlet nozzle Inlet nozzle
Centrifugal fan kg b c g (long) (short)
60
EC centrifugal,
c ±1
Depth of screw
forward
max. 10 mm
22
5 104 ±1 ,5 90 ±0,2
M6
70
44
Ø75 ±0,1
EC-SYSTEMS
35
Ø 236,4
Ø 240
Ø 102
Ø 350
Ø250
Ø360
0
37
0 ±2
45
6
85
Accessories
2
Brass lead tips
g
b
Technology
Contacts
53
Inlet nozzle Capacitor Terminal box Electr. connections
p. 550 p. 560 f. p. 562 p. 596 f.
AC centrifugal fans
backward curved, 3-D, Ø 400
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
[in H O]
A 1
2
300 2
1,0
200
2
B
0,5
100 1
50 Hz 60 Hz
54
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Variable
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC, B also GOST
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
66
EC centrifugal,
162 ±1
Depth of screw
forward
max. 10 mm
5 117 ±1 22 90 ±0,2
50
M6
90
Ø75 ±0,1
EC-SYSTEMS
48
Ø 257
Ø 102
Ø404
Ø 370
Ø268
0
37
0 ±2
45
6
85
Accessories
2
Brass lead tips
91
142
Technology
Contacts
55
Inlet nozzle Guard grille Capacitor Terminal box Electr. connections
p. 550 p. 553 p. 560 f. p. 562 p. 596 f.
AC centrifugal fans
backward curved, 3-D, Ø 400
Electr. connection
Nominal voltage
Speed/rpm (1)
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A µF/VDB °C p. 596 f.
n P1 I LpA
Curves [rpm] [W] [A] [dB(A)]
[in H O]
2
600
B 2 1390 430 2.17 68
2,0
500
400 2 2
1,5
300
1,0
200 1 1
B
0,5
A
100
50 Hz 60 Hz
56
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Diagonal
backward
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Dimensions
Inlet nozzle
Centrifugal fan kg b c d e g (long)
R4E 400-AP17 -06 8.8 164.0 193.0 148.0 70.0 113.0 54476-2-4013
c ±1 66
EC centrifugal,
forward
5 d ±1 22
50
11
90
5
±0
,3
Ø 100 -0,4
EC-SYSTEMS
e
Ø 257
Ø 124
Ø404
Ø 370
Ø268
M6
0
45˚
60
2
Accessories
g Depth of screw
Brass lead tips max. 12 mm
b
Mounting dimensions
Ø7
Technology
Ø
11
Ø
5
10
0
4x90˚
55
28
Contacts
57
Inlet nozzle Guard grille Capacitor Electr. connections
p. 550 p. 553 p. 560 f. p. 596 f.
AC centrifugal fans
backward curved, Ø 400
Electr. connection
Nominal voltage
Speed/rpm (1)
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A µF/VDB °C p. 596 f.
n P1 I LpA
Curves [rpm] [W] [A] [dB(A)]
[in H O]
A 1
2
500
400
1,5
C
2 2
300
B A
1,0
D
200 1 1
0,5
100
50 Hz 60 Hz
58
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Diagonal
backward
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
218 ±2 66
EC centrifugal,
forward
5,5 148 ±2 22
11
50
90
5
±0
,3
EC-SYSTEMS
Ø100 -0,4
70
Ø265,5
Ø 257
Ø 404
Ø 370
Ø124
M6
0
45˚
60
Accessories
4
Depth of screw
Brass lead tips
140
max. 12 mm
188
Mounting dimensions
Ø7
Technology
Ø
11
Ø
5
10
0
4x90˚
55
28
Contacts
59
Inlet nozzle Guard grille Electr. connections
p. 550 p. 553 p. 596 f.
AC centrifugal fans
backward curved, Ø 400
Electr. connection
Nominal voltage
Speed/rpm (1)
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A µF/VDB °C p. 596 f.
n P1 I LpA
Curves [rpm] [W] [A] [dB(A)]
[in H O]
2
500
400
1,5
300
1,0
B 1
200
2
0,5
100
1
50 Hz 60 Hz
60
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Diagonal
backward
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Dimensions
Inlet nozzle
Centrifugal fan kg d e (long)
218 ±2 66
EC centrifugal,
forward
5,5 d ±2 22
11
50
90
5
±0
,3
EC-SYSTEMS
Ø100 -0,4
e
Ø265,5
Ø 257
Ø 404
Ø 370
Ø124
M6
0
45˚
60
Accessories
4
Depth of screw
Brass lead tips
140
max. 12 mm
188
Mounting dimensions
Ø7
Technology
Ø
11
Ø
5
10
0
4x90˚
55
28
Contacts
61
Inlet nozzle Guard grille Capacitor Electr. connections
p. 550 p. 553 p. 560 f. p. 596 f.
AC centrifugal fans
backward curved, 3-D, Ø 450
Electr. connection
Nominal voltage
Speed/rpm (1)
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A µF/VDB °C p. 596 f.
R4D 450 (2) M4D 110-GF A 3~ 230/400 50 1350 0.74 2.60/1.50 — -40 to +80 D1)/D2)
subject to alterations (1) Nominal data in operating point with maximum load (2) 230 VAC ∆ / 400 VAC Y
n P1 I LwA
Curves [rpm] [kW] [A] [dB(A)]
[in H O]
A
2
12
A 12 850 0.25 2.15/1.25 63
8
200
1
11
0,5
4
100 7
10
62
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Diagonal
backward
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE (acc. to EN 60034)
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
234±2
5,5 75
45˚
EC centrifugal,
3
0.
5±
forward
11
28
87
49
Ø284,5
4x90˚
Ø455
Ø300
Ø485
Ø289
Ø450
Ø100
EC-SYSTEMS
0
80
140 4
Accessories
2 M6
209 Depth of screw
max. 12 mm
Brass lead tips
Mounting dimensions
Ø7
Technology
Ø
11
Ø
5
10
0
4x90˚
Ø 130
28
Contacts
63
Inlet nozzle Guard grille Electr. connections
p. 550 p. 553 p. 596 f.
AC centrifugal fans
backward curved, 3-D, Ø 450
Electr. connection
Nominal voltage
Speed/rpm (1)
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A µF/VDB °C p. 596 f.
R4E 450 M4E 110-GF A 1~ 230 50 1250 0.68 3.00 14.0 /400 -40 to +70 A2a)
subject to alterations (1) Nominal data in operating point with maximum load
n P1 I LwA
Curves [rpm] [kW] [A] [dB(A)]
[in H O]
A
2
2
A 8 670 0.29 2.49 53
A 9 790 0.29 2.41 62
6
300 A 10 545 0.19 2.00 50
A 11 510 0.19 2.00 47
1,0
1
0,5
12 8
100 4
11
7
10
64
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Diagonal
backward
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE (acc. to EN 60034)
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
234±2
5,5 75
45˚
EC centrifugal,
3
0.
5±
forward
11
28
87
49
Ø284,5
4x90˚
Ø455
Ø300
Ø485
Ø289
Ø450
Ø100
EC-SYSTEMS
0
80
140 4
Accessories
2 M6
209 Depth of screw
max. 12 mm
Brass lead tips
Mounting dimensions
Ø7
Technology
Ø
11
Ø
5
10
0
4x90˚
Ø 130
28
Contacts
65
Inlet nozzle Guard grille Capacitor Electr. connections
p. 550 p. 553 p. 560 f. p. 596 f.
AC centrifugal fans
backward curved, 3-D, Ø 450
Electr. connection
Nominal voltage
Speed/rpm (1)
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A µF/VDB °C p. 596 f.
R6D 450 (2) M6D 110-EF A 3~ 230/400 50 930 0.29 1.30/0.75 — -40 to +85 D1)/D2)
subject to alterations (1) Nominal data in operating point with maximum load (2) 230 VAC ∆ / 400 VAC Y
n P1 I LwA
Curves [rpm] [kW] [A] [dB(A)]
[in H O]
A
2
5
A 12 610 0.11 0.90/0.52 52
100 12 8
1
11
0,25
50 7
10
66
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Diagonal
backward
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE (acc. to EN 60034)
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
234±2
5,5 75
45˚
EC centrifugal,
3
0.
5±
forward
11
28
87
49
Ø284,5
4x90˚
Ø455
Ø300
Ø485
Ø289
Ø450
Ø100
EC-SYSTEMS
0
80
140 4
Accessories
2 M6
209 Depth of screw
max. 12 mm
Brass lead tips
Mounting dimensions
Ø7
Technology
Ø
11
Ø
5
10
0
4x90˚
Ø 130
28
Contacts
67
Inlet nozzle Guard grille Electr. connections
p. 550 p. 553 p. 596 f.
AC centrifugal fans
backward curved, 3-D, Ø 450
Electr. connection
Nominal voltage
Speed/rpm (1)
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A µF/VDB °C p. 596 f.
R6E 450 M6E 110-EF A 1~ 230 50 930 0.30 1.42 8.0 /450 -40 to +70 A2a)
subject to alterations (1) Nominal data in operating point with maximum load
n P1 I LwA
Curves [rpm] [kW] [A] [dB(A)]
[in H O]
A
2
8
A 12 565 0.12 1.30 52
12
100
1
4
0,25
11
7
50
10
68
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Diagonal
backward
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE (acc. to EN 60034)
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
234±2
5,5 75
45˚
EC centrifugal,
3
0.
5±
forward
11
28
87
49
Ø284,5
4x90˚
Ø455
Ø300
Ø485
Ø289
Ø450
Ø100
EC-SYSTEMS
0
80
140 4
Accessories
2 M6
209 Depth of screw
max. 12 mm
Brass lead tips
Mounting dimensions
Ø7
Technology
Ø
11
Ø
5
10
0
4x90˚
Ø 130
28
Contacts
69
Inlet nozzle Guard grille Capacitor Electr. connections
p. 550 p. 553 p. 560 f. p. 596 f.
AC centrifugal fans
backward curved, Ø 450
Electr. connection
Nominal voltage
Speed/rpm (1)
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A µF/VDB °C p. 596 f.
n P1 I LpA
Curves [rpm] [W] [A] [dB(A)]
[in H O]
2
300
D
1,0
200 2 1 1 1
0,5
100 1
70
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Diagonal
backward
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Dimensions
Inlet nozzle
Centrifugal fan kg b c g (long)
EC centrifugal,
c ±2 71
forward
5,5 148 ±2 25
11
100
55
5
±0
,3
EC-SYSTEMS
Ø100 -0,4
70
Ø454
Ø 413
Ø298
Ø 287
Ø124
0
45˚ M6
60
Accessories
4 Depth of screw
g max. 12 mm
Brass lead tips
b Mounting dimensions
Ø7
Technology
Ø
11
Ø
5
10
0
4x90˚
55
28
Contacts
71
Inlet nozzle Guard grille Capacitor Electr. connections
p. 550 p. 553 p. 560 f. p. 596 f.
AC centrifugal fans
backward curved, 3-D, Ø 500
Electr. connection
Nominal voltage
Speed/rpm (1)
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A µF/VDB °C p. 596 f.
R4D 500(2) M4D 138-HF A 3~ 230/400 50 1375 1.43 5.20/3.00 — -40 to +80 D1)/D2)
subject to alterations (1) Nominal data in operating point with maximum load (2) 230 VAC ∆ / 400 VAC Y
n P1 I LwA
Curves [rpm] [kW] [A] [dB(A)]
[in H O]
A
2
600
A 5 1125 1.00 5.42/3.13 74
A 6 1140 0.97 5.28/3.05 73
3
A 7 970 0.73 5.18/2.99 71
2,0
500
A 8 945 0.74 5.30/3.06 69
2 A 9 970 0.73 5.16/2.98 68
400 A 10 775 0.49 4.66/2.69 64
1,5
6
A 11 755 0.49 4.73/2.73 63
300 5
A 12 775 0.49 4.68/2.70 62
9 1
1,0
200 8
4
12
7
0,5
11
100
10
72
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Lateral
backward
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE (acc. to EN 60034)
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
249±2
22,5˚
5,5 75 0.3
162
±
EC centrifugal,
8x
forward
45
˚
28
87
49
Ø480
Ø140
Ø355
Ø505
Ø342
Ø337
Ø470
EC-SYSTEMS
1000
175 5
Accessories
2 M10
233 Depth of screw
max. 18 mm
Brass lead tips
Technology
Contacts
73
Inlet nozzle Guard grille Electr. connections
p. 550 p. 553 p. 596 f.
AC centrifugal fans
backward curved, 3-D, Ø 500
Electr. connection
Nominal voltage
Speed/rpm (1)
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A µF/VDB °C p. 596 f.
R6D 500(2) M6D 110-GF A 3~ 230/400 50 910 0.48 1.90/1.10 — -40 to +80 D1)/D2)
subject to alterations (1) Nominal data in operating point with maximum load (2) 230 VAC ∆ / 400 VAC Y
n P1 I LwA
Curves [rpm] [kW] [A] [dB(A)]
[in H O]
A
2
250
3 A 4 760 0.31 1.66/0.96 62
A 5 745 0.32 1.72/1.00 60
A 6 770 0.30 1.60/0.93 61
200 2
A 7 650 0.23 1.59/0.92 57
0,75
11 7
0,25
50 10
74
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Diagonal
backward
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE (acc. to EN 60034)
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
245±2
5,5 75
45˚
EC centrifugal,
3
0.
5±
forward
11
28
87
49
4x90˚
Ø480
Ø355
Ø505
Ø342
Ø337
Ø470
Ø100
EC-SYSTEMS
0
80
175 5
Accessories
2 M6
233 Depth of screw
max. 12 mm
Brass lead tips
Mounting dimensions
Ø7
Technology
Ø
11
Ø
5
10
0
4x90˚
Ø 130
28
Contacts
75
Inlet nozzle Guard grille Electr. connections
p. 550 p. 553 p. 596 f.
AC centrifugal fans
backward curved, 3-D, Ø 500
Electr. connection
Nominal voltage
Speed/rpm (1)
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A µF/VDB °C p. 596 f.
R6E 500 M6E 110-GF A 1~ 230 50 910 0.51 2.34 12.0 /450 -40 to +60 A2a)
subject to alterations (1) Nominal data in operating point with maximum load
n P1 I LwA
Curves [rpm] [kW] [A] [dB(A)]
[in H O]
A 1
2
A
A 2 910 0.51 2.33 67
A 3 915 0.48 2.22 68
300
A 4 720 0.37 2.55 62
A 5 690 0.38 2.64 60
3
1,00
100
4
9
0,25
8
50 7
12
11
10
76
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Diagonal
backward
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE (acc. to EN 60034)
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
245±2
5,5 75
45˚
EC centrifugal,
3
0.
5±
forward
11
28
87
49
4x90˚
Ø480
Ø355
Ø505
Ø342
Ø337
Ø470
Ø100
EC-SYSTEMS
0
80
175 5
Accessories
2 M6
233 Depth of screw
max. 12 mm
Brass lead tips
Mounting dimensions
Ø7
Technology
Ø
11
Ø
5
10
0
4x90˚
Ø 130
28
Contacts
77
Inlet nozzle Guard grille Capacitor Electr. connections
p. 550 p. 553 p. 560 f. p. 596 f.
AC centrifugal fans
backward curved, Ø 500
Electr. connection
Nominal voltage
Speed/rpm (1)
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A µF/VDB °C p. 596 f.
n P1 I LpA
Curves [rpm] [W] [A] [dB(A)]
[in H O]
2
300
1,00
200 2
0,75
0,50
100 1
0,25
50 Hz 60 Hz
78
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Diagonal
backward
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
270,5 ±2 79
EC centrifugal,
forward
5,5 148 ±2 28
11
115
65
5
±0
,3
Ø100 -0,4
70
Ø334,5
Ø504
Ø 520
Ø 323
Ø124
EC-SYSTEMS
0
45˚ M6
60
5
Accessories
Depth of screw
Brass lead tips
180
max. 12 mm
241
Mounting dimensions
Ø7
Technology
Ø
11
Ø
5
10
0
4x90˚
55
28
Contacts
79
Inlet nozzle Guard grille Capacitor Electr. connections
p. 550 p. 553 p. 560 f. p. 596 f.
AC centrifugal fans
backward curved, 3-D, Ø 560
Electr. connection
Nominal voltage
Speed/rpm (1)
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A µF/VDB °C p. 596 f.
R4D 560 (2) M4D 138-LA A 3~ 230/400 50 1365 2.38 8.66/5.00 — -40 to +60 D1)/D2)
subject to alterations (1) Nominal data in operating point with maximum load (2) 230 VAC ∆ / 400 VAC Y
n P1 I LwA
Curves [rpm] [kW] [A] [dB(A)]
[in H O]
A 1
A
2
600 3
A 7 955 1.13 8.11/4.68 74
A 8 920 1.17 8.42/4.86 73
2,0
200 8
4
12
0,5
11 7
100
10
80
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Lateral
backward
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE (acc. to EN 60034)
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
274±2
22,5˚
5,5 82 0.3
162
±
EC centrifugal,
8x
forward
45
˚
30
95
60
Ø540
Ø140
Ø398
Ø565
Ø385
Ø380
Ø515
EC-SYSTEMS
1000
195 5
Accessories
2 M10
258 Depth of screw
max. 18 mm
Brass lead tips
Technology
Contacts
81
Inlet nozzle Guard grille Electr. connections
p. 550 p. 553 p. 596 f.
AC centrifugal fans
backward curved, 3-D, Ø 560
Electr. connection
Nominal voltage
Speed/rpm (1)
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A µF/VDB °C p. 596 f.
R6D 560 (2) M6D 110-IA A 3~ 230/400 50 885 0.78 2.95/1.70 — -40 to +55 D1)/D2)
subject to alterations (1) Nominal data in operating point with maximum load (2) 230 VAC ∆ / 400 VAC Y
n P1 I LwA
Curves [rpm] [kW] [A] [dB(A)]
[in H O]
A
2
300
A 5 610 0.49 2.89/1.67 58
3 A 6 605 0.49 2.88/1.66 59
A 7 595 0.32 2.31/1.34 65
1,0
250
A 8 560 0.33 2.40/1.39 58
2
A 9 565 0.33 2.39/1.38 57
200 A 10 480 0.21 1.99/1.15 54
0,75
9
5
100
8
12
4
0,25
11 7
50
10
82
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Diagonal
backward
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE (acc. to EN 60034)
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
270±2
5,5 82
45˚
EC centrifugal,
3
0.
5±
forward
11
30
95
60
4x90˚
Ø540
Ø398
Ø565
Ø385
Ø380
Ø515
Ø100
EC-SYSTEMS
0
80
195 5
Accessories
2 M6
258 Depth of screw
max. 12 mm
Brass lead tips
Mounting dimensions
Ø7
Technology
Ø
11
Ø
5
10
0
4x90˚
Ø 130
28
Contacts
83
Inlet nozzle Guard grille Electr. connections
p. 550 p. 553 p. 596 f.
AC centrifugal fans
backward curved, 3-D, Ø 630
Electr. connection
Nominal voltage
Speed/rpm (1)
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A µF/VDB °C p. 596 f.
R4D 630 (2) M4D 138-LA A 3~ 230/400 50 1300 4.25 13.10/7.55 — -40 to +60 D1)/D2)
subject to alterations (1) Nominal data in operating point with maximum load (2) 230 VAC ∆ / 400 VAC Y
n P1 I LwA
Curves [rpm] [kW] [A] [dB(A)]
[in H O]
A
2
1000
A 4 960 2.30 12.85/7.42 76
A 5 930 2.36 13.10/7.55 74
3
A 6 1005 2.19 12.13/7.01 78
800
A 7 745 1.50 11.32/6.53 70
3,0
6
A 12 610 0.93 9.34/5.39 64
400
1
5
9
1,0
200 12
8 4
11 7
10
84
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Lateral
backward
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE (acc. to EN 60034)
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
305,5±2
22,5˚
5,5 98,5 0.3
162
±
EC centrifugal,
8x
forward
45
˚
37
14
72
Ø635
Ø140
Ø447
Ø635
Ø433
Ø427
Ø634
EC-SYSTEMS
1000
220 6
Accessories
2 M10
290 Depth of screw
max. 18 mm
Brass lead tips
Technology
Contacts
85
Inlet nozzle Guard grille Electr. connections
p. 550 p. 553 p. 596 f.
AC centrifugal fans
backward curved, 3-D, Ø 630
Electr. connection
Nominal voltage
Speed/rpm (1)
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A µF/VDB °C p. 596 f.
R4D 630 (2) M4D 138-NA A 3~ 230/400 50 1170 3.31 10.74/6.20 — -40 to +35 D1)/D2)
subject to alterations (1) Nominal data in operating point with maximum load (2) 230 VAC ∆ / 400 VAC Y
n P1 I LwA
Curves [rpm] [kW] [A] [dB(A)]
[in H O]
A
2
2
A 12 550 0.57 5.40/3.12 60
400
6
1
9
1,0
5
200
12
8 4
11 7
10
86
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Lateral
backward
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE (acc. to EN 60034)
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
305,5±2
22,5˚
5,5 98,5 0.3
162
±
EC centrifugal,
8x
forward
45
˚
37
14
72
Ø635
Ø140
Ø447
Ø635
Ø433
Ø427
Ø634
EC-SYSTEMS
1000
220 6
Accessories
2 M10
290 Depth of screw
max. 18 mm
Brass lead tips
Technology
Contacts
87
Inlet nozzle Guard grille Electr. connections
p. 550 p. 553 p. 596 f.
AC centrifugal fans
backward curved, 3-D, Ø 630
Electr. connection
Nominal voltage
Speed/rpm (1)
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A µF/VDB °C p. 596 f.
R6D 630 (2) M6D 138-HF A 3~ 230/400 50 880 1.31 4.85/2.80 — -40 to +60 D1)/D2)
subject to alterations (1) Nominal data in operating point with maximum load (2) 230 VAC ∆ / 400 VAC Y
n P1 I LwA
Curves [rpm] [kW] [A] [dB(A)]
[in H O]
A
2
6 1
A 12 430 0.36 3.70/2.14 54
200
5
9
4
0,5
8
100
12 7
11
10
88
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Lateral
backward
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE (acc. to EN 60034)
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
305,5±2
22,5˚
5,5 98,5 0.3
162
±
EC centrifugal,
8x
forward
45
˚
37
14
72
Ø635
Ø140
Ø447
Ø635
Ø433
Ø427
Ø634
EC-SYSTEMS
1000
220 6
Accessories
2 M10
290 Depth of screw
max. 18 mm
Brass lead tips
Technology
Contacts
89
Inlet nozzle Guard grille Electr. connections
p. 550 p. 553 p. 596 f.
90
information
General
AC centrifugal fans and blowers forward curved
AC centrifugal,
backward
AC centrifugal fans and blowers, single inlet Ø 085 - Ø 400 92
AC centrifugal blowers with plastic housing, dual inlet Ø 140 - Ø 160 158
AC centrifugal,
forward
AC centrifugal blowers, dual inlet Ø 097 - Ø 250 178
EC centrifugal,
backward
ward for clean rooms
EC centrifugal, back-
EC centrifugal,
forward
EC-SYSTEMS
Accessories
Technology
Contacts
91
AC centrifugal fan and blower
single inlet, Ø 085
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
2430 32 0.15
[Pa]
[in H O]
A 1
2
A 2 2590 30 0.14
160
0,6
120
0,4
80 2
A
0,2
40
0 10 20 30 40 50 [CFM]
20 40 60 80 [m3/h]
50 Hz 60 Hz
92
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Variable
backward
– Protection class: I
– Capacitor: FPU (P2) acc. to IEC 252
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
68 ±1
57±1
2 Depth of screw
max. 4 mm
EC centrifugal,
Brass lead tips M4
47±0
forward
20 ,1
Ø17 ±0,1
Ø67
Ø59
Ø85
6
Ø30
300 ±20
EC-SYSTEMS
42
76 117,5
66 60,2
56 3
5,5
Accessories
4,5
20˚
84
34,5
42
68
58
3x1
116,5
Ø65-1
71,5
Technology
54,5
M4
80 300
Contacts
93
Inlet nozzle Guard grille Capacitor Electr. connections
p. 552 p. 554 p. 560 f. p. 596 f.
AC centrifugal fan and blower
single inlet, Ø 097
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
2120 35 0.16
[Pa]
[in H O]
A 1
2
A 2 2335 33 0.15
0,8
200
160
0,6
120
0,4
80
A
0,2
40
1
0 20 40 60 [CFM]
20 40 60 80 100 [m3/h]
50 Hz 60 Hz
94
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Variable
backward
– Protection class: I
– Capacitor: FPU (P2) acc. to IEC 252
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Centrifugal blower
Centrifugal fan kg kg
without flange
41,5 ±1
55,9 ±1
2 Depth of screw
max. 4 mm
EC centrifugal,
Brass lead tips M4
forward
47±0
20 ,1
Ø17±0,1
Ø79
Ø59
Ø97
6
Ø32
300 ±20
EC-SYSTEMS
40
143
75
53 18
Accessories
1
1 120˚ 3
24
3x 56,5˚
46
75
3
137
Ø80
Technology
6
96
60
300
1
Contacts
95
Inlet nozzle Capacitor Electr. connections
p. 552 p. 560 f. p. 596 f.
AC centrifugal fan and blower
single inlet, Ø 108
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
2070 34 0.16
[Pa]
[in H O]
A 1
2
A 2 2470 31 0.15
320
1,2
240
0,8
160
2
0,4
80
0 20 40 60 80 100 [CFM]
50 Hz 60 Hz
96
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Variable
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
63 ±1
54 ±1
Depth of screw
max. 5 mm
EC centrifugal,
Brass lead tips M4
58 ±0
forward
15 ,1
Ø108
Ø84
Ø72
6
Ø55
300 ±20
EC-SYSTEMS
52
115 159
97 79
76 4
Accessories
M4
8
66
83
50
118
168
300
Ø87-1
Technology
71
82
Contacts
97
Inlet nozzle Guard grille Capacitor Air filter Electr. connections
p. 552 p. 554 p. 560 f. p. 563 p. 596 f.
AC centrifugal fan and blower
single inlet, Ø 120
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
A 1 2460 77 0.34
[Pa]
[in H O]
2
A 2 2665 69 0.31
400
1,5
300
1,0
200 A
0,5
100
50 Hz 60 Hz
98
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Variable
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC, GOST
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
83 ±1
63 ±1
2 Depth of screw
max. 5 mm
EC centrifugal,
Brass lead tips M4
58 ±0
forward
15 ,1
Ø27±0,1
Ø120
Ø96
Ø92
6
Ø55
450 ±20
EC-SYSTEMS
62
115 178
100 82
76 4
Accessories
M4
7
68
83
50
132
184
450
Ø100 -1
Technology
86
98
Contacts
99
Inlet nozzle Guard grille Capacitor Terminal box Air filter Electr. connections
p. 552 p. 554 p. 560 f. p. 562 p. 563 p. 596 f.
AC centrifugal fans and blowers
single inlet, Ø 120
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
A 1 2200 54 0.24
[Pa]
[in H O]
2
A 2 2410 51 0.23
B 1 2335 80 0.36
400
B 2 2580 72 0.32
1,5
300
1,0
200 2
A
2
0,5
100
1 1
50 Hz 60 Hz
100
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Variable
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: B CCC
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Dimensions Dimensions
Centrifugal blower Centrifugal blower
Centrifugal fan kg b c kg A B C D F G I
without flange with flange
R2E 120-AR21 -05 1.2 62.0 85.0 — G2E 120-CR21 -01 1.9 110.0 94.0 98.0 82.0 77.0 6.0 99.0
c ±1
63 ±1
EC centrifugal,
2 Depth of screw
forward
max. 5 mm
Brass lead tips M4
58 ±0
15 ,1
Ø27±0,1
Ø120
Ø92
Ø96
EC-SYSTEMS
Ø55
6
450 ±20
b
A
B 170,5
Accessories
F 87
G
˚
4x90
71
67
D
45˚
C
101
3
180
Technology
Ø95
110
6
85
I 450
Contacts
101
Inlet nozzle Guard grille Capacitor Terminal box Electr. connections
p. 552 p. 554 p. 560 f. p. 562 p. 596 f.
AC centrifugal fan and blower
single inlet, Ø 133
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
A 1 2290 83 0.37
[Pa]
[in H O]
2
A 2 2530 73 0.33
400
1,5
300
1,0
200
0,5
100
50 Hz 60 Hz
102
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Axial
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
68,5 ±1
63 ±1
2 Depth of screw
max. 5 mm
EC centrifugal,
Brass lead tips M4
forward
58 ±0
15 ,1
Ø27±0,1
Ø108
Ø133
Ø92
Ø55
EC-SYSTEMS
450 ±20
46
170,5
59 87
Accessories
˚
4x90
71
67
45˚
101
3
180
Ø112
140
Technology
450
81
85
6
Contacts
103
Inlet nozzle Capacitor Terminal box Electr. connections
p. 552 p. 560 f. p. 562 p. 596 f.
AC centrifugal fan and blower
single inlet, Ø 140
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
A 1 1460 62 0.29
[Pa]
[in H O]
2
A 2 1930 56 0.26
400
1,5
300
1,0
200 2
0,5
100
50 Hz 60 Hz
104
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Variable
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
45 ±1
58,8 ±1
Depth of screw
max. 5 mm
EC centrifugal,
Brass lead tips M4
58 ±0
forward
20 ,1
Ø121.9
Ø140
Ø92
Ø55
6
450 ±20
EC-SYSTEMS
37,4
216
62 95
Accessories
˚
4x90
71
67
45˚
137,6
Ø125,5
3
242
158
Technology
6
85
62 450
Contacts
105
Inlet nozzle Guard grille Capacitor Electr. connections
p. 552 p. 554 p. 560 f. p. 596 f.
AC centrifugal fan and blower
single inlet, Ø 140
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
1700 98 0.43
[Pa]
[in H O]
A 1
2
A 2 2100 89 0.40
320
1,2
2
240
0,8
A
160
1
0,4
80
50 Hz 60 Hz
106
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Variable
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC, GOST
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
72 ±1
63 ±1
2 Depth of screw
max. 5 mm
EC centrifugal,
Brass lead tips M4
58 ±0
forward
15 ,1
Ø27±0,1
Ø121
Ø140
Ø92
Ø55
6
450 ±20
EC-SYSTEMS
59
130 227
115 103
94 5
Accessories
6,3
M4
105
120
92
158
450
248
Ø118 -1
Technology
107
100
Contacts
107
Inlet nozzle Guard grille Capacitor Terminal box Air filter Electr. connections
p. 552 p. 554 p. 560 f. p. 562 p. 563 p. 596 f.
AC centrifugal fans and blowers
single inlet, Ø 140
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
[in H O]
2
400
1,5
300 2
1,0
200
A
0,5
100 1 1
50 Hz 60 Hz
108
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Variable
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC, GOST
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Dimensions
Centrifugal fan kg d e Centrifugal blower kg
with flange
R2E 140-AI28 -05 2.1 83.0 35.0 G2E 140-AI28 -01 3.4
72 ±1
d ±1
EC centrifugal,
2 Depth of screw
forward
max. 5 mm
Brass lead tips M4
58 ±0
e ,1
Ø27±0,1
Ø121
Ø140
Ø92
EC-SYSTEMS
Ø55
6
450 ±20
59
130 227
115 103
Accessories
94 5
6,3
M4
105
120
92
158
450
248
Technology
Ø118 -1
107
100
Contacts
109
Inlet nozzle Guard grille Capacitor Terminal box Air filter Electr. connections
p. 552 p. 554 p. 560 f. p. 562 p. 563 p. 596 f.
AC centrifugal blowers
single inlet, Ø 140
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
1910 98 0.43
[Pa]
[in H O]
A 1
2
A 2 2280 86 0.38
500
B 1 2220 123 0.54
B 2 2470 105 0.46
400
B
1,5
A
300 2
1,0
200
1
0,5
100 1
50 Hz 60 Hz
110
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Variable
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC, GOST
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
backward
Mass of
Centrifugal blower kg
without flange
237
113
EC centrifugal,
111 100
forward
Ø101
95
85
EC-SYSTEMS
6
248
267 ±1
261 ±1
22 ±0,3
Ø125,5
450 ±20
Brass lead tips
Accessories
5 3
Technology
Contacts
111
Capacitor Terminal box Electr. connections
p. 560 f. p. 562 p. 596 f.
AC centrifugal fan and blower
single inlet, Ø 146
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
[in H O]
A 1
2
500
400
1,5
300
1,0
200
0,5
100 1
50 Hz 60 Hz
112
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Variable
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC, GOST
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
72±1
68 ±1
2 Depth of screw
max. 5 mm
EC centrifugal,
Brass lead tips M4
58 ±0
forward
20 ,1
Ø27 ±0,1
Ø127
Ø146
Ø92
6
Ø55
450 ±20
EC-SYSTEMS
62
130 227
115 101
94 5
Accessories
6,3
M4
105
120
92
158
450
248
Ø125,5 -1
Technology
107
104
Contacts
113
Inlet nozzle Guard grille Capacitor Terminal box Air filter Electr. connections
p. 552 p. 554 p. 560 f. p. 562 p. 563 p. 596 f.
AC centrifugal fans and blowers
single inlet, Ø 160
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
[in H O]
2
600
2,0
500 A
400 2
1,5
300
1,0
200 B
0,5
2
100 1
50 Hz 60 Hz
114
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: A variable, B lateral
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Dimensions
Centrifugal fan kg d e Centrifugal blower kg
with flange
R4E 160-AB01 -01 1.7 72.0 25.0 G4E 160-AB01 -01 2.9
72±1
d ±1
EC centrifugal,
2 Depth of screw
forward
max. 5 mm
Brass lead tips M4
58 ±0
e ,1
Ø27 ±0,1
Ø131
Ø160
Ø92
EC-SYSTEMS
6
Ø55
450 ±20
62
130 227
115 103
Accessories
94 5
6,3
M4
105
120
92
175
450
248
Technology
Ø130 -1
107
100
Contacts
115
Inlet nozzle Guard grille Capacitor Terminal box Air filter Electr. connections
p. 552 p. 554 p. 560 f. p. 562 p. 563 p. 596 f.
AC centrifugal fan and blower
single inlet, Ø 180
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
[in H2O]
600 2
2,0
400
1
1,0
B
200
2
50 Hz 60 Hz
116
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Axial
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Dimensions
Centrifugal fan kg e Centrifugal blower kg
with flange
89 ±1
82 ±1
EC centrifugal,
2 Depth of screw
forward
max. 5 mm
Brass lead tips M4
58 ±0
e ,1
Ø27±0,1
Ø180
Ø149
Ø92
EC-SYSTEMS
Ø55
6
450 ±20
75
125 261
110 120
Accessories
86 5
M4
7
120
140
110
194
A Motor
450
281
protruding
Technology
Ø150-1
by 15 mm!
123
105
Contacts
117
Inlet nozzle Guard grille Capacitor Terminal box Air filter Electr. connections
p. 552 p. 554 p. 560 f. p. 562 p. 563 p. 596 f.
AC centrifugal fan and blower
single inlet, Ø 180
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
[in H O]
A 1
2
250
B
200 2
0,75
150 2
0,5
A
100 1
0,25
50 1
50 Hz 60 Hz
118
information
General
– Motor protection: Without thermal protection
AC centrifugal,
– Cable exit: Variable
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Dimensions
Centrifugal blower Centrifugal blower
Centrifugal fan kg kg C D E S
with flange (small) with flange (large)
120,5 ±1
104 ±1 90 ±0,2
Depth of screw
EC centrifugal,
5 max. 10 mm
forward
M6
Ø75 ±0,1
35
Ø180
Ø149
Ø102
37
20
0±
EC-SYSTEMS
60
6
92
Brass lead tips
183
B Hole with 129 296
large flange only 90 133
Accessories
163
7
5˚
D
S
C
˚
60
6x
332
Technology
192
Ø149 -1
600
136
3,2
155
Contacts
119
Inlet nozzle Guard grille Terminal box Electr. connections
p. 552 p. 554 p. 562 p. 596 f.
AC centrifugal fan and blower
single inlet, Ø 180
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
[in H O]
2
250
B
200
0,75
150 2 2
0,5
A
100
0,25
50 1 1
50 Hz 60 Hz
120
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Variable
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Dimensions
Centrifugal blower Centrifugal blower
Centrifugal fan kg kg C D E S
with flange (small) with flange (large)
120,5 ±1
104 ±1 90 ±0,2
Depth of screw
EC centrifugal,
5 max. 10 mm
forward
M6
Ø75 ±0,1
35
Ø180
Ø149
Ø102
37
20
0±
EC-SYSTEMS
60
6
92
Brass lead tips
183
B Hole with 129 296
large flange only 90 133
Accessories
163
7
5˚
D
S
C
˚
60
6x
332
Technology
192
Ø149 -1
600
136
3,2
155
Contacts
121
Inlet nozzle Guard grille Capacitor Terminal box Electr. connections
p. 552 p. 554 p. 560 f. p. 562 p. 596 f.
AC centrifugal fan and blower
single inlet, Ø 200
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
[in H O]
A 1
2
300
1,0
250
200 2 2
150
0,5
100
A
50 1 1
50 Hz 60 Hz
122
information
General
– Motor protection: Without thermal protection
AC centrifugal,
– Cable exit: Axial
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Dimensions
Centrifugal blower Centrifugal blower
Centrifugal fan kg kg C D E S
with flange (small) with flange (large)
129 ± 1
117± 1 90 ± 0,2
Depth of screw
EC centrifugal,
5 max. 10 mm
forward
M6
Ø75 ± 0,1
48
Ø202
Ø176
Ø102
37
20
0±
EC-SYSTEMS
60
6
102
Brass lead tips
196,5
B Hole with 142,5 327
large flange only 90 146
Accessories
176,5
7
5˚
D
S
C
˚
60
6x
370
Technology
213
Ø 175
600
151
3,2
160,5
Contacts
123
Inlet nozzle Terminal box Electr. connections
p. 552 p. 562 p. 596 f.
AC centrifugal fans and blowers
single inlet, Ø 200
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
[in H O]
2
300
1,0
250
200 2 2
150
0,5
A
100
50 1 1
50 Hz 60 Hz
124
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Axial
backward
– Protection class: I
– Capacitor: FPU (P2) acc. to IEC 252
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC, B also GOST
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Dimensions
Centrifugal blower Centrifugal blower
Centrifugal fan kg kg C D E S
with flange (small) with flange (large)
129 ± 1
117± 1 90 ± 0,2
Depth of screw
EC centrifugal,
5 max. 10 mm
forward
M6
Ø75 ± 0,1
48
Ø202
Ø176
Ø102
37
20
0±
EC-SYSTEMS
60
6
102
Brass lead tips
196,5
B Hole with 142,5 327
large flange only 90 146
Accessories
176,5
7
5˚
D
S
C
˚
60
6x
370
Technology
213
Ø 175
600
151
3,2
160,5
Contacts
125
Inlet nozzle Capacitor Terminal box Electr. connections
p. 552 p. 560 f. p. 562 p. 596 f.
AC centrifugal fan and blower
single inlet, Ø 225
Electr. connection
Nominal voltage
Speed/rpm (1)
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A µF/VDB Pa °C p. 596 f.
n P1 I LpA
Curves [rpm] [W] [A] [dB(A)]
[in H O]
2
300
1,0
2 2
200
A
0,5
100 1 1
50 Hz 60 Hz
126
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Diagonal
backward
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Options: B 400 VAC ∆/Y for two speed steps available on request
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Dimensions
Centrifugal fan kg Centrifugal blower Centrifugal blower kg C D E S
with flange (small) with flange (large)
137,5 ±2
5,5 128 ±2
EC centrifugal,
Ø1
15
forward
Ø100 +0,5
50
Ø195 ±1
Ø124
225 ±2
0
60
45˚ M6
EC-SYSTEMS
102
Depth of screw
max. 12 mm
196,5
B Hole with 142,5 327
large flange only 90 158
Accessories
176,5
7
E
5˚
D
S
C
˚
60
6x
0
370
60
Technology
242
Ø194
151
3,2
166,5 5,5
Contacts
127
Inlet nozzle Electr. connections
p. 552 p. 596 f.
AC centrifugal fan and blower
single inlet, Ø 225
Electr. connection
Nominal voltage
Speed/rpm (1)
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A µF/VDB Pa °C p. 596 f.
n P1 I LpA
Curves [rpm] [W] [A] [dB(A)]
[in H O]
2
300
1,0
2 2
200
A
0,5
100 1 1
50 Hz 60 Hz
128
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Diagonal
backward
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Dimensions
Centrifugal fan kg Centrifugal blower Centrifugal blower kg C D E S
with flange (small) with flange (large)
137,5 ±2
5,5 128 ±2
EC centrifugal,
Ø1
15
forward
Ø100 +0,5
50
Ø195 ±1
Ø124
225 ±2
0
60
45˚ M6
EC-SYSTEMS
102
Depth of screw
max. 12 mm
196,5
B Hole with 142,5 327
large flange only 90 158
Accessories
176,5
7
E
5˚
D
S
C
˚
60
6x
0
370
60
Technology
242
Ø194
151
3,2
166,5 5,5
Contacts
129
Inlet nozzle Capacitor Electr. connections
p. 552 p. 560 f. p. 596 f.
AC centrifugal fan and blower
single inlet, Ø 250
Electr. connection
Nominal voltage
Speed/rpm (1)
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A µF/VDB Pa °C p. 596 f.
n P1 I LpA
Curves [rpm] [W] [A] [dB(A)]
[in H O]
2
500
B 2 1410 386 0.94 71
400
1,5
300 2 2
1,0
200
A
1 1
0,5
100
50 Hz 60 Hz
130
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Diagonal
backward
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Options: 400 VAC ∆/Y for two speed steps available on request
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Dimensions
Centrifugal fan kg Centrifugal blower Centrifugal blower kg C D E S U
with flange (small) with flange (large)
175,5 ±2
5,5 148 ±2
EC centrifugal,
Ø1
15
forward
Ø100 +0.5
70
Ø192 ±1
Ø240±2
Ø124
0
60
45˚ M6
EC-SYSTEMS
140
Depth of screw
max. 12 mm
207
7
D
U
S
C
0˚
6x6
392
0
60
Technology
275
Ø200
173
3,2
205,5 5,5
Contacts
131
Inlet nozzle Electr. connections
p. 552 p. 596 f.
AC centrifugal fan and blower
single inlet, Ø 250
Electr. connection
Nominal voltage
Speed/rpm (1)
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A µF/VDB Pa °C p. 596 f.
n P1 I LpA
Curves [rpm] [W] [A] [dB(A)]
[in H O]
2
500
B 2 1390 395 2.05 69
400
1,5
300 2 2
1,0
B
200
1 1
0,5
A
100
50 Hz 60 Hz
132
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Diagonal
backward
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Dimensions
Centrifugal fan kg Centrifugal blower Centrifugal blower kg C D E S U
with flange (small) with flange (large)
175,5 ±2
5,5 148 ±2
EC centrifugal,
Ø1
15
forward
Ø100 +0.5
70
Ø192 ±1
Ø240±2
Ø124
0
60
45˚ M6
EC-SYSTEMS
140
Depth of screw
max. 12 mm
207
7
D
U
S
C
0˚
6x6
392
0
60
Technology
275
Ø200
173
3,2
205,5 5,5
Contacts
133
Inlet nozzle Capacitor Electr. connections
p. 552 p. 560 f. p. 596 f.
AC centrifugal fan and blowers
single inlet, Ø 250
Electr. connection
Nominal voltage
Speed/rpm (1)
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A µF/VDB Pa °C p. 596 f.
n P1 I LpA
Curves [rpm] [W] [A] [dB(A)]
[in H O]
2
150
0,5
2 2
100
A
0,25
1 1
50
50 Hz 60 Hz
134
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Diagonal
backward
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Dimensions
Centrifugal fan kg Centrifugal blower Centrifugal blower kg C D E S U
with flange (small) with flange (large)
175,5 ±2
5,5 128 ±2
EC centrifugal,
Ø1
15
forward
Ø100 +0.5
50
Ø192 ±1
Ø240±2
Ø124
0
60
45˚ M6
EC-SYSTEMS
140
Depth of screw
max. 12 mm
207
7
D
U
S
C
0˚
6x6
392
0
60
Technology
275
Ø200
173
3,2
205,5 5,5
Contacts
135
Inlet nozzle Capacitor Electr. connections
p. 552 p. 560 f. p. 596 f.
AC centrifugal fans
single inlet, Ø 250
Electr. connection
Nominal voltage
Speed/rpm (1)
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A µF/VDB Pa °C p. 596 f.
R4D 250 (2) M4D 110-GF A 3~ 230/400 50 1400 0.75 2.77/1.60 — 0 -25 to +80 D1)/D2)
R4E 250 M4E 110-GF B 1~ 230 50 1270 0.64 2.80 12.0 /450 0 -25 to +80 A2a)
subject to alterations (1) Nominal data in operating point with maximum load (2) 230 VAC ∆ / 400 VAC Y
n P1 I LpA
Curves [rpm] [kW] [A] [dB(A)]
[in H O]
2
300
A
1,0
250
B
1
0,8
200
1
0,6
150
0,4
100
0,2
50
136
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Diagonal
backward
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE (acc. to EN 60034)
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
137,5±2 50-2
6x60˚
EC centrifugal,
102 4x90˚
forward
Ø7
M6
Ø240
Ø249
Ø193
Ø300
800
EC-SYSTEMS
Z
Brass lead tips 4,5 Ø100
29±1 163±1 Ø285±1
Ø115±0,3
Housing width Ø300
±1
Accessories
85
Ø2
Depth of screw
6x60˚
View Z max. 12 mm
Scroll housing used:
150 Ø7 Mounting dimensions
Ø7
287
203
267
Technology
Ø
30˚
11
247 65
Ø
˚
10
˚
30
0
4x90˚
18
138
30˚
25˚
230 147
Ø 130
30˚
30˚
213 158
˚
30
30
30˚ 30˚
˚
198
184
170
28
Contacts
137
Inlet nozzle Capacitor Electr. connections
p. 552 p. 560 f. p. 596 f.
AC centrifugal fans
single inlet, Ø 250
Electr. connection
Nominal voltage
Speed/rpm (1)
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A µF/VDB Pa °C p. 596 f.
R6D 250 (2) M6D 110-EF A 3~ 230/400 50 930 0.27 1.25/0.72 — 0 -25 to +95 D1)/D2)
R6E 250 M6E 094-FA B 1~ 230 50 800 0.26 1.16 6.0 /450 0 -25 to +90 A2a)
subject to alterations (1) Nominal data in operating point with maximum load (2) 230 VAC ∆ / 400 VAC Y
n P1 I LpA
Curves [rpm] [kW] [A] [dB(A)]
[in H2O]
2
2
120
0,4
80
11
0,2
40
B
138
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Diagonal
backward
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: A VDE (acc. to EN 60034)
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Dimensions
Centrifugal fan kg l Inlet nozzle Flange
137,5±2 50-2
6x60˚
EC centrifugal,
102 4x90˚
forward
Ø7
M6
Ø240
Ø249
Ø193
Ø300
EC-SYSTEMS
Z
Brass lead tips 4,5 Ø100
29±1 163±1 Ø285±1
Ø115±0,3
Housing width Ø300
±1
Accessories
85
Ø2
Depth of screw
6x60˚
View Z max. 12 mm
Scroll housing used:
150 Ø7 Mounting dimensions B Mounting dimensions A
Ø7 Ø7
287
203
267
Technology
Ø
30˚
11
11
247 65
Ø
Ø
5
˚
10
10
˚
30
0
4x90˚
4x90˚
18
138
30˚
25˚
230 147
Ø 130
55
30˚
30˚
213 158
˚
30
30
30˚ 30˚
˚
198
184
170
28 28
Contacts
139
Inlet nozzle Capacitor Electr. connections
p. 552 p. 560 f. p. 596 f.
AC centrifugal fan and blower
single inlet, Ø 280
Electr. connection
Nominal voltage
Speed/rpm (1)
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A µF/VDB Pa °C p. 596 f.
n P1 I LpA
Curves [rpm] [W] [A] [dB(A)]
[in H O]
2
800
3,0
600 A
2,0
400
1
1,0
200
50 Hz 60 Hz
140
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Diagonal
backward
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
149,5 ±2
5,5 148 ±2
Ø1
15
EC centrifugal,
forward
Ø100 +0.5
70
Ø234 ±1
Ø280±2
Ø124
0
60
45˚ M6
114
Depth of screw
EC-SYSTEMS
max. 12 mm
200
176
149 412
100 190
Accessories
180
10
280
322
316
200
348
M6
444
0
60
Technology
315
Ø236
175
5x6
0˚
172 3,5
Contacts
141
Inlet nozzle Capacitor Electr. connections
p. 552 p. 560 f. p. 596 f.
AC centrifugal fans
single inlet, Ø 280
Electr. connection
Nominal voltage
Speed/rpm (1)
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A µF/VDB Pa °C p. 596 f.
R4D 280 (2) M4D 110-IA A 3~ 230/400 50 1330 1.32 4.75/2.75 — 0 -25 to +65 D1)/D2)
R4E 280 M4E 110-IA B 1~ 230 50 1230 1.05 4.75 16.0 /450 100 -25 to +50 A2a)
subject to alterations (1) Nominal data in operating point with maximum load (2) 230 VAC ∆ / 400 VAC Y
n P1 I LpA
Curves [rpm] [kW] [A] [dB(A)]
[in H O]
A 1
2
600
B 2 1425 0.54 2.34 72
2
2,0
500
A
1,6
400
B
1
1
1,2
300
0,8
200
0,4
100
142
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Diagonal
backward
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE (acc. to EN 60034)
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
149,5±2 57-2
6x60˚
EC centrifugal,
114 4x90˚
forward
Ø7
M6
Ø280
Ø296
Ø228
Ø336
800
EC-SYSTEMS
Z
Brass lead tips 5,5 Ø100
29±1 183±1 Ø315±1
Ø115±0,3
Housing width Ø336
±1
Accessories
15
Ø3
Depth of screw
6x60˚
View Z max. 12 mm
Scroll housing used:
180 Ø7 Mounting dimensions
Ø7
266
205
254
Technology
Ø
30˚
11
236 65
Ø
˚
10
˚
30
0
4x90˚
13
162
30˚
25˚
218 152
Ø 130
30˚
30˚
200 148
˚
30
30
30˚ 30˚
˚
183
172
161
28
Contacts
143
Inlet nozzle Capacitor Electr. connections
p. 552 p. 560 f. p. 596 f.
AC centrifugal fans
single inlet, Ø 280
Electr. connection
Nominal voltage
Speed/rpm (1)
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A µF/VDB Pa °C p. 596 f.
R6D 280 (2) M6D 110-EF A 3~ 230/400 50 870 0.45 1.56/0.90 — 0 -25 to +70 D1)/D2)
R6E 280 M6E 094-HA B 1~ 230 50 795 0.42 1.95 12.0 /450 0 -25 to +55 A2a)
subject to alterations (1) Nominal data in operating point with maximum load (2) 230 VAC ∆ / 400 VAC Y
n P1 I LpA
Curves [rpm] [kW] [A] [dB(A)]
[in H O]
A 1
2
250
2
2
A
200
0,75
B
1
150 1
0,5
100
0,25
50
144
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Diagonal
backward
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: A VDE (acc. to EN 60034)
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Dimensions
Centrifugal fan kg l Inlet nozzle Flange
149,5±2 57-2
6x60˚
EC centrifugal,
114 4x90˚
forward
Ø7
M6
Ø280
Ø296
Ø228
Ø336
EC-SYSTEMS
Z
Brass lead tips 5,5 Ø100
29±1 183±1 Ø315±1
Ø115±0,3
Housing width Ø336
±1
Accessories
15
Ø3
Depth of screw
6x60˚
View Z max. 12 mm
Scroll housing used:
180 Ø7 Mounting dimensions B Mounting dimensions A
Ø7 Ø7
266
205
254
Technology
Ø
30˚
11
11
236 65
Ø
Ø
5
˚
10
10
˚
30
0
4x90˚
4x90˚
13
162
30˚
25˚
218 152
Ø 130
55
30˚
30˚
200 148
˚
30
30
30˚ 30˚
˚
183
172
161
28 28
Contacts
145
Inlet nozzle Capacitor Electr. connections
p. 552 p. 560 f. p. 596 f.
AC centrifugal fan
single inlet, Ø 310
Electr. connection
Nominal voltage
Speed/rpm (1)
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A µF/VDB Pa °C p. 596 f.
R4D 310 (2) M4D 138-HF A 3~ 230/400 50 1310 2.18 6.75/3.90 — 0 -25 to +55 D1)/D2)
subject to alterations (1) Nominal data in operating point with maximum load (2) 230 VAC ∆ / 400 VAC Y
n P1 I LpA
Curves [rpm] [kW] [A] [dB(A)]
[in H O]
A 1
A
2
2
2,0
500
1,6
400
1,2
300
0,8
200
1
0,4
100
146
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Lateral
backward
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE (acc. to EN 60034)
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
EC centrifugal,
6x60˚
128 8x45˚
forward
Ø9
M10
Ø315
Ø327
Ø257
Ø374
EC-SYSTEMS
1000
Z
4
42±1 203±1 Ø140 Ø350±1
Housing width Ø162±0,3 Ø374
Accessories
±1
50
6x60˚
View Z max. 18 mm
Scroll housing used:
184
Ø9
349
249
325
Technology
303 30˚ 65
˚
˚
30
18
176
30˚
25˚
283 186
30˚
30˚
264 200
˚
30
30
30˚ 30˚
˚
246
229
214
Contacts
147
Inlet nozzle Electr. connections
p. 552 p. 596 f.
AC centrifugal fans
single inlet, Ø 310
Electr. connection
Nominal voltage
Speed/rpm (1)
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A µF/VDB Pa °C p. 596 f.
R6D 310 (2) M6D 110-GF A 3~ 230/400 50 840 0.76 2.50/1.45 — 50 -25 to +50 D1)/D2)
R6E 310 M6E 110-IA B 1~ 230 50 800 0.77 3.37 16.0 /400 0 -25 to +65 A2a)
subject to alterations (1) Nominal data in operating point with maximum load (2) 230 VAC ∆ / 400 VAC Y
n P1 I LpA
Curves [rpm] [kW] [A] [dB(A)]
[in H O]
A 1
2
300
B 2 950 0.42 2.32 65
2
2
1,0
250
0,8
200 1
A
0,6
150
B
1
0,4
100
0,2
50
148
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Diagonal
backward
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE (acc. to EN 60034)
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
163,5±2 61-2
6x60˚
EC centrifugal,
128 4x90˚
forward
Ø9
M6
Ø315
Ø327
Ø257
Ø374
800
EC-SYSTEMS
Z
Brass lead tips 4,5 Ø100
26±1 203±1 Ø350±1
Ø115±0,3
Housing width Ø374
±1
Accessories
50
Ø3
Depth of screw
6x60˚
View Z max. 12 mm
Scroll housing used:
184 Ø9 Mounting dimensions
Ø7
349
249
325
Technology
Ø
30˚
11
303 65
Ø
˚
10
˚
30
0
4x90˚
18
176
30˚
25˚
283 186
Ø 130
30˚
30˚
264 200
˚
30
30
30˚ 30˚
˚
246
229
214
28
Contacts
149
Inlet nozzle Capacitor Electr. connections
p. 552 p. 560 f. p. 596 f.
AC centrifugal fan
single inlet, Ø 355
Electr. connection
Nominal voltage
Speed/rpm (1)
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A µF/VDB Pa °C p. 596 f.
R4D 355 (2) M4D 138-LA A 3~ 230/400 50 1300 4.36 13.75/7.95 — 0 -25 to +70 D1)/D2)
subject to alterations (1) Nominal data in operating point with maximum load (2) 230 VAC ∆ / 400 VAC Y
n P1 I LpA
Curves [rpm] [kW] [A] [dB(A)]
[in H O]
A 1
A
2
700
2,4
600
2,0
500
1
1,6
400
1,2
300
0,8
200
0,4
100
150
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Lateral
backward
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE (acc. to EN 60034)
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
EC centrifugal,
6x60˚
143 8x45˚
forward
Ø9
M10
Ø355
Ø372
Ø289
Ø413
EC-SYSTEMS
1000
Z
5
42±1 228±1 Ø140 Ø390±1
Housing width Ø162±0,3 Ø413
Accessories
±1
90
6x60˚
View Z max. 18 mm
Scroll housing used:
203
Ø9
389
280
362
Technology
338 30˚ 65
˚
˚
30
18
196
30˚
25˚
315 207
30˚
30˚
294 222
˚
30
30
30˚ 30˚
˚
274
256
238
Contacts
151
Inlet nozzle Electr. connections
p. 552 p. 596 f.
AC centrifugal fans
single inlet, Ø 355
Electr. connection
Nominal voltage
Speed/rpm (1)
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A µF/VDB Pa °C p. 596 f.
R6D 355 (2) M6D 110-IA A 3~ 230/400 50 865 0.90 3.05/1.77 — 250 -25 to +50 D1)/D2)
R6E 355 M6E 110-IA B 1~ 230 50 830 0.83 3.90 16.0 /400 175 -25 to +55 A2a)
subject to alterations (1) Nominal data in operating point with maximum load (2) 230 VAC ∆ / 400 VAC Y
n P1 I LpA
Curves [rpm] [kW] [A] [dB(A)]
[in H O]
A 1
2
1
1,2
300
A
B
0,8
200
1
0,4
100
152
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Diagonal
backward
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE (acc. to EN 60034)
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
178,5±2 70-2
6x60˚
EC centrifugal,
143 4x90˚
forward
Ø9
M6
Ø355
Ø372
Ø289
Ø413
800
EC-SYSTEMS
Z
Brass lead tips 5,5 Ø100
26±1 228±1 Ø390±1
Ø115±0,3
Housing width Ø413
±1
Accessories
90
Ø3
Depth of screw
6x60˚
View Z max. 12 mm
Scroll housing used:
203 Ø9 Mounting dimensions
Ø7
389
280
362
Technology
Ø
30˚
11
338 65
Ø
˚
10
˚
30
0
4x90˚
18
196
30˚
25˚
315 207
Ø 130
30˚
30˚
294 222
˚
30
30
30˚ 30˚
˚
274
256
238
28
Contacts
153
Inlet nozzle Capacitor Electr. connections
p. 552 p. 560 f. p. 596 f.
AC centrifugal fan
single inlet, Ø 400
Electr. connection
Nominal voltage
Speed/rpm (1)
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A µF/VDB Pa °C p. 596 f.
R4D 400 (2) M4D 138-NA A 3~ 230/400 50 1210 4.92 14.70/8.50 — 550 (3) -25 to +35 D1)/D2)
subject to alterations (1) Nominal data in operating point with maximum load (2) 230 VAC ∆ / 400 VAC Y (3) without voltage control
n P1 I LpA
Curves [rpm] [kW] [A] [dB(A)]
[in H O]
A 1
A
2
1000
3,2
800 2
2,4
600
1
1,6
400
0,8
200
154
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Lateral
backward
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE (acc. to EN 60034)
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
EC centrifugal,
6x60˚
163 8x45˚
forward
Ø9
M10
Ø400
Ø414
Ø325
Ø456
EC-SYSTEMS
1000
Z
4
42±1 255±1 Ø140 Ø430±1
Housing width Ø162±0,3 Ø456
Accessories
±1
30
6x60˚
View Z max. 18 mm
Scroll housing used:
228
Ø9
437
316
408
Technology
380 30˚ 65
˚
˚
30
20
220
30˚
25˚
355 233
30˚
30˚
331 250
˚
30
30
30˚ 30˚
˚
308
288
268
Contacts
155
Inlet nozzle Electr. connections
p. 552 p. 596 f.
AC centrifugal fans
single inlet, Ø 400
Electr. connection
Nominal voltage
Speed/rpm (1)
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A µF/VDB Pa °C p. 596 f.
R6D 400 (2) M6D 138-LA A 3~ 230/400 50 840 2.40 8.47/4.90 — 0 -25 to +75 D1)/D2)
R8D 400 (2) M8D 138-HF B 3~ 230/400 50 615 0.89 3.46/2.00 — 100 -25 to +65 D1)/D2)
subject to alterations (1) Nominal data in operating point with maximum load (2) 230 VAC ∆ / 400 VAC Y
n P1 I LpA
Curves [rpm] [kW] [A] [dB(A)]
[in H O]
A 1
2
400
1,2
300
A
2
1
0,8
200
B
1
0,4
100
156
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Lateral
backward
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE (acc. to EN 60034)
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
EC centrifugal,
6x60˚
163 8x45˚
forward
Ø9
M10
Ø400
Ø414
Ø325
Ø456
EC-SYSTEMS
1000
Z
4
42±1 255±1 Ø140 Ø430±1
Housing width Ø162±0,3 Ø456
Accessories
±1
30
6x60˚
View Z max. 18 mm
Scroll housing used:
228
Ø9
437
316
408
Technology
380 30˚ 65
˚
˚
30
20
220
30˚
25˚
355 233
30˚
30˚
331 250
˚
30
30
30˚ 30˚
˚
308
288
268
Contacts
157
Inlet nozzle Electr. connections
p. 552 p. 596 f.
AC centrifugal blowers
dual inlet, Ø 140
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C
n P1 I LpA
Curves [rpm] [W] [A] [dB(A)]
[in H O]
A
2
A 5
A 6 1540 68 0.31 49
A 7 690 56 0.26 36
300
2 A 8 1015 55 0.25 38
1,0
Ste
4
p4
200
Ste
p3
6 1
0,5
Ste
100
p2
8
St
ep
5
1
50 Hz 60 Hz
158
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Connection leads: Via plug
backward
– Protection class: I
– Capacitor: FPU (P2) integrated in terminal box completely wired up and ready for plug-in
– Product conforming to standards: EN 60335-2-31, CE
– Approvals: VDE
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
backward
Mass of
Centrifugal blower kg
with flange
109,8 158
10 110
EC centrifugal,
forward
Ø124,5
157,5
138
217,7
216,4
Ø123
EC-SYSTEMS
91,4
4x
sheet metal nut for thread
X EN ISO 1478-ST4.8
(min. screw length
14.5 mm plus thickness
30 of mounting material)
30 215,8
142
Accessories
6 5 1 4
6 x plug pin: AMP 926 886-1 circuit
159
Guard grille Connection lead Capacitor
p. 556 p. 558 p. 560 f.
AC centrifugal blowers
dual inlet, Ø 146
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C
n P1 I LpA
Curves [rpm] [W] [A] [dB(A)]
[in H O]
A
2
300
A 4 1740 66 0.35 53
2
A 5 925 58 0.31 40
250 A 6 1355 55 0.30 47
660 48 0.27 31
Ste
A 7
p4
A 8 960 46 0.26 38
0,8
200
150
1
Ste
p3
6
0,4
100
Ste
3
p2
8
50
Ste
5
p1
50 Hz 60 Hz
160
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Connection leads: Via plug
backward
– Protection class: I
– Capacitor: FPU (P2) integrated in terminal box completely wired up and ready for plug-in
– Product conforming to standards: EN 60335-2-31, CE
– Approvals: VDE
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
backward
Mass of
Centrifugal blower kg
with flange
170
30 117 110
EC centrifugal,
1,8
forward
Ø149,5
138
45
222
EC-SYSTEMS
4x
99,5
255
6 5 1 4
6 x plug pin: AMP 926 886-1 circuit
161
Guard grille Connection lead Capacitor
p. 556 p. 558 p. 560 f.
AC centrifugal blowers
dual inlet, Ø 146
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C
n P1 I LpA
Curves [rpm] [W] [A] [dB(A)]
[in H O]
A
2
300
St A 7 660 71 0.37 31
ep 2
3 A 8 960 68 0.36 38
250
St
ep
2
0,8
200
4
Ste
p1
150
6 1
0,4
100
3
50 8
5
50 Hz 60 Hz
162
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Connection leads: Via plug
backward
– Protection class: I
– Capacitor: FPU (P2) integrated in terminal box completely wired up and ready for plug-in
– Product conforming to standards: EN 60335-2-31, CE
– Approvals: VDE
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
backward
Mass of
Centrifugal blower kg
with flange
170
30 117 110
EC centrifugal,
1,8
forward
Ø149,5
138
45
222
EC-SYSTEMS
4x
99,5
255
6 5 1 4
6 x plug pin: AMP 926 886-1 circuit
163
Guard grille Connection lead Capacitor
p. 556 p. 558 p. 560 f.
AC centrifugal blowers
dual inlet, Ø 146
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C
n P1 I LpA
Curves [rpm] [W] [A] [dB(A)]
[in H O]
A
2
A 5 890 81 0.42 37
A 6 1315 77 0.42 43
A 7 680 69 0.38 31
300 A 8 990 67 0.37 35
2
1,0
200
St
ep
4
4
Ste
0,5
p3
6 1
100
Ste
2p
8 St 3
ep
1
5
7
50 Hz 60 Hz
164
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Connection leads: Via plug
backward
– Protection class: I
– Capacitor: FPU (P2) integrated in terminal box completely wired up and ready for plug-in
– Product conforming to standards: EN 60335-2-31, CE
– Approvals: VDE, CCC, GOST
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
backward
Mass of
Centrifugal blower kg
with flange
178
173
112 110
EC centrifugal,
forward
76
Ø 149,5
138
163
216
128
EC-SYSTEMS
4x
sheet metal nut for thread
EN ISO 1478-ST4.8
(min. screw length
14.5 mm plus thickness
12 X 53 of mounting material)
Accessories
30 220 195
6 5 1 4
6 x plug pin: AMP 926 886-1 circuit
165
Guard grille Connection lead Capacitor
p. 556 p. 558 p. 560 f.
AC centrifugal blowers
dual inlet, Ø 146
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C
n P1 I LpA
Curves [rpm] [W] [A] [dB(A)]
[in H O]
A
2
A 5
4
Step
200
2
Step
1
1
0,5
100
8 3
5
7
50 Hz 60 Hz
166
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Connection leads: Via plug
backward
– Protection class: I
– Capacitor: FPU (P2) integrated in terminal box completely wired up and ready for plug-in
– Product conforming to standards: EN 60335-2-31, CE
– Approvals: VDE, GOST
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
backward
Mass of
Centrifugal blower kg
with flange
178
173
112 110
EC centrifugal,
forward
76
Ø 149,5
138
163
216
128
EC-SYSTEMS
4x
sheet metal nut for thread
EN ISO 1478-ST4.8
(min. screw length
14.5 mm plus thickness
12 X 53 of mounting material)
Accessories
30 220 195
6 5 1 4
6 x plug pin: AMP 926 886-1 circuit
167
Guard grille Connection lead Capacitor
p. 556 p. 558 p. 560 f.
AC centrifugal blowers
dual inlet, Ø 146
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C
n P1 I LpA
Curves [rpm] [W] [A] [dB(A)]
[in H O]
A
2
200
1
0,5
8
3
100
50 Hz 60 Hz
168
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Connection leads: Via plug
backward
– Protection class: I
– Capacitor: FPU (P2) integrated in terminal box completely wired up and ready for plug-in
– Product conforming to standards: EN 60335-2-31, CE
– Approvals: VDE
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
backward
Mass of
Centrifugal blower kg
with flange
178
173
112 110
EC centrifugal,
forward
76
Ø 149,5
138
163
216
128
EC-SYSTEMS
4x
sheet metal nut for thread
EN ISO 1478-ST4.8
(min. screw length
14.5 mm plus thickness
7 X 35 of mounting material)
Accessories
30 220 199
6 5 1 4
6 x plug pin: AMP 926 886-1 circuit
169
Guard grille Connection lead Capacitor
p. 556 p. 558 p. 560 f.
AC centrifugal blowers
dual inlet, Ø 160
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C
1~ 230 50 400 1170 110 0.49 2.5 /400 53 100 -25 to +55
D2E 160 M2E 068-BF A —
subject to alterations
n P1 I LpA
Curves [rpm] [W] [A] [dB(A)]
[in H O]
A
2
A 5
A 6 1135 61 0.30 44
Ste
p4
A 7 555 50 0.26 30
300 A 8 835 49 0.25 36
2
1,0
St
ep
3
200
Ste
p2
4
0,5
Step 1
1
6
100
3
8
5
50 Hz 60 Hz
170
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Connection leads: Via plug
backward
– Protection class: I
– Capacitor: FPU (P2) integrated in terminal box completely wired up and ready for plug-in
– Product conforming to standards: EN 60335-2-31, CE
– Approvals: CCC, GOST
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
backward
Mass of
Centrifugal blower kg
with flange
277 163
30 138 110
EC centrifugal,
forward
Ø149,5
138
EC-SYSTEMS
282
5x
190
114,5
6 5 1 4
6 x plug pin: AMP 926 886-1 circuit
171
Connection lead Capacitor
p. 558 p. 560 f.
AC centrifugal blowers
dual inlet, Ø 160
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C
1~ 230 50 550 1400 180 0.80 4.0 /400 59 150 -25 to +40
D2E 160 M2E 068-CF A —
subject to alterations
n P1 I LpA
Curves [rpm] [W] [A] [dB(A)]
[in H O]
A
2
A 8 740 75 0.37 34
2
300
St
ep
1,0
200 St
ep 4
2
1
0,5
Ste 6
100 p1
3
8 5
7
50 Hz 60 Hz
172
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Connection leads: Via plug
backward
– Protection class: I
– Capacitor: FPU (P2) integrated in terminal box completely wired up and ready for plug-in
– Product conforming to standards: EN 60335-2-31, CE
– Approvals: CCC, GOST
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
backward
Mass of
Centrifugal blower kg
with flange
277 163
30 138 110
EC centrifugal,
forward
Ø149,5
138
EC-SYSTEMS
282
5x
190
114,5
6 5 1 4
6 x plug pin: AMP 926 886-1 circuit
173
Connection lead Capacitor
p. 558 p. 560 f.
AC centrifugal blowers
dual inlet, Ø 146
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C
n P1 I LpA
Curves [rpm] [W] [A] [dB(A)]
1080 58 0.25 45
[Pa]
[in H O]
A 1
A
2
100 Ste
p3 2 A 5 560 48 0.22 26
St
ep A 6 1080 40 0.19 39
2
A 7 450 20 0.16 21
80
4 A 8 735 20 0.16 29
0,3
A 9 315 13 0.13 17
60 6 A 10 475 13 0.13 20
0,2
1
St
ep
40
1
8
0,1
20 3
10 5
7
9
50 Hz 60 Hz
174
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Connection leads: Via plug
backward
– Protection class: I
– Capacitor: FPU (P2) integrated in terminal box completely wired up and ready for plug-in
– Product conforming to standards: EN 60335-1, CE
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
backward
Mass of
Centrifugal blower kg
with flange
272
203 247
98,5 226
EC centrifugal,
forward
100
116
98
216
210
Ø128
4x
sheet metal nut for thread
EC-SYSTEMS
EN ISO 1478-ST4.8
X
(min. screw length
14.5 mm plus thickness
80 209 of mounting material)
239 Accessories
5
1 = Step 1 (min.) 7 8 9
PE N Speed
2 = Step 2
3 = Step 3 6 increase
4 = Step 4 4
5 = Step 5 (max.) 5
8 = N L1
9 = Protective earth 1 2 3
Contacts
175
Guard grille Connection lead Capacitor
p. 556 p. 558 p. 560 f.
AC centrifugal blowers
dual inlet, Ø 146
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C
n P1 I LpA
Curves [rpm] [W] [A] [dB(A)]
1050 76 0.33 45
[Pa]
[in H O]
A 1
A
2
100
A 5 570 47 0.22 29
Ste
p5 A 6 820 43 0.21 35
2
A 7 400 13 0.15 25
80
A 8 580 13 0.15 28
0,3
St
ep
A 9 330 10 0.13 25
4
60 A 10 480 10 0.13 26
4
Ste
0,2
1
p3
40
St
ep
6
2
3
St
ep
0,1
20
8
5
10
7
9
50 Hz 60 Hz
176
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Connection leads: Via plug
backward
– Protection class: I
– Capacitor: FPU (P2) integrated in terminal box completely wired up and ready for plug-in
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
backward
Mass of dual
Dual centrifugal kg
blower with flange
677
272 272
203 247 158 247
EC centrifugal,
98,5 226 226
forward
100
116
98
216
210
Ø128
EC-SYSTEMS
X
209
80 8x 239 239
sheet metal nut for thread 643
EN ISO 1478-ST4.8
(min. screw length
14.5 mm plus thickness
Accessories
of mounting material)
5
1 = Step 1 (min.) 3 2 1
PE N Speed
2 = Step 2
3 = Step 3 4 increase
4 = Step 4 6
5 = Step 5 (max.) 5
8 = N L1
9 = Protective earth 9 8 7
Contacts
177
Guard grille Connection lead Capacitor
p. 556 p. 558 p. 560 f.
AC centrifugal blowers
dual inlet, Ø 097
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
A 1 1670 27 0.13
[Pa]
[in H O]
2
A 2 2080 25 0.12
200
0,75
150 2
0,5
100 2 2
B
0,25
50 A 1
1 1
50 Hz 60 Hz
178
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Variable
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: C CCC, GOST
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
backward
Mass of
Dimensions
Centrifugal blower Centrifugal blower kg A B C D E H I K L M N O P
without flange with flange
D2E 097-BK66 -02 D2E 097-BK66 -48 1.5 180.0 168.0 100.0 88.0 67.0 79.5 146.0 162.0 86.0 165.0 68.0 114.0 62.5
D2E 097-BI56 -02 D2E 097-BI56 -48 1.5 180.0 168.0 100.0 88.0 67.0 79.5 146.0 162.0 86.0 165.0 68.0 114.0 62.5
EC centrifugal,
forward
A L
B 1
5,5
E
D
C
EC-SYSTEMS
P
M
ØH
200 I
Accessories
179
Guard grille Capacitor Electr. connections
p. 555 p. 560 f. p. 596 f.
AC centrifugal blowers
dual inlet, Ø 133
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
[in H O]
2
400
1,5
300 2 2
A
1,0
B
200 1
0,5
100 1
50 Hz 60 Hz
180
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Variable
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC, B also GOST
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
backward
Mass of
Dimensions
Centrifugal blower Centrifugal blower kg A B C D E I J K L M N P
without flange with flange
D2E 133-AM47 -01 D2E 133-AM47 -23 3.5 254.0 238.0 108.0 92.0 69.0 215.0 300.0 171.5 88.0 180.0 79.0 66.0
EC centrifugal,
forward
A L
B 1
5,5
E
D
C
145
EC-SYSTEMS
P
Ø112
M
N
J I
Accessories
181
Guard grille Capacitor Electr. connections
p. 555 p. 560 f. p. 596 f.
AC centrifugal blowers
dual inlet, Ø 133
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
[in H O]
2
400
1,5
300 2
1,0
200
0,5
100 1
50 Hz 60 Hz
182
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Variable
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
backward
Mass of
204
EC centrifugal,
forward
270 97
254 1
5,5
102
142
126
145
67,5
EC-SYSTEMS
213
Ø112
98
300 232
Accessories
183
Guard grille Capacitor Electr. connections
p. 555 p. 560 f. p. 596 f.
AC centrifugal blowers
dual inlet, Ø 133
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
1240 66 0.30
[Pa]
[in H O]
A 1
2
A 2 1380 63 0.29
140
120
0,4
100
80
60 A
0,2
40
20
50 Hz 60 Hz
184
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Variable
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
backward
Mass of
171,5
EC centrifugal,
forward
254 88
238 1
5,5
69
108
92
145
EC-SYSTEMS
66
180
Ø112
76
300 215
Accessories
185
Guard grille Capacitor Electr. connections
p. 555 p. 560 f. p. 596 f.
AC centrifugal blowers
dual inlet, Ø 133
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
A 1 1150 69 0.31
[Pa]
[in H O]
2
A 2 1300 65 0.30
160
B 1 1280 67 0.30
0,6
B 2 1370 58 0.27
120
0,4
80 2 2
0,2
A B
40
1 1
50 Hz 60 Hz
186
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Variable
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
backward
Mass of
204
EC centrifugal,
forward
270 97
254 1
5,5
102
142
126
145
67,5
EC-SYSTEMS
213
Ø112
98
300 232
Accessories
187
Guard grille Capacitor Electr. connections
p. 555 p. 560 f. p. 596 f.
AC centrifugal blowers
dual inlet, Ø 146
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C p. 596 f.
1~ 230 50 935 1650 245 1.08 6.0 /400 60 100 -25 to +40
D2E 146 M2E 068-EC A
1~ 230 60 690 2100 270 1.20 6.0 /400 62 250 -25 to +40 A1)
1~ 230 50 970 2050 300 1.31 8.0 /400 63 200 -25 to +40
D2E 146 M2E 068-EC B
1~ 230 60 690 2550 330 1.45 8.0/400 68 400 -25 to +35 A1)
subject to alterations
n P1 I
Curves [rpm] [W] [A]
[in H O]
2
600
B 2 2600 206 0.91
2,0
500
B
400 2 2
1,5
300 A 1
1,0
200 1
0,5
100
50 Hz 60 Hz
188
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Variable
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC, GOST
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
backward
Mass of
206
EC centrifugal,
forward
270 97
254 1
5,5
102
126
145
142
EC-SYSTEMS
69
219
Ø117
98
350 232
Accessories
189
Guard grille Capacitor Electr. connections
p. 555 p. 560 f. p. 596 f.
AC centrifugal blowers
dual inlet, Ø 146
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
A 1 1180 88 0.39
[Pa]
[in H O]
2
A 2 1390 65 0.29
160
0,6
120
2
0,4
80
0,2
40 1
50 Hz 60 Hz
190
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Variable
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
backward
Mass of
206
EC centrifugal,
forward
270 97
254 1
5,5
102
126
145
142
EC-SYSTEMS
69
219
Ø117
98
350 232
Accessories
191
Guard grille Capacitor Electr. connections
p. 555 p. 560 f. p. 596 f.
AC centrifugal blowers
dual inlet, Ø 160
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
[in H O]
A 1
2
200
160
0,6
2
120
A
0,4
80
0,2
40 1
50 Hz 60 Hz
192
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Variable
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
backward
Mass of
226
EC centrifugal,
forward
214 103
198 1
5,5
105
129
145
175
EC-SYSTEMS
87
242
Ø130
100,5
400 176
Accessories
193
Guard grille Capacitor Electr. connections
p. 555 p. 560 f. p. 596 f.
AC centrifugal blowers
dual inlet, Ø 160
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C p. 596 f.
1~ 230 50 1195 1850 410 1.80 10.0 /400 64 200 -25 to +40
D2E 160 M2E 074-FA A A1)
subject to alterations
n P1 I
Curves [rpm] [W] [A]
[in H O]
2
600
2
2,0
500
A
400
1,5
300
1,0
200
0,5
100
50 Hz 60 Hz
194
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Variable
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC, GOST
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
backward
Mass of
225
EC centrifugal,
forward
102
5
107
17
EC-SYSTEMS
87
241
Ø130
100,5
Accessories
1300 276
195
Guard grille Capacitor Electr. connections
p. 555 p. 560 f. p. 596 f.
AC centrifugal blowers
dual inlet, Ø 160
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
[in H O]
2
250
B 2 1460 103 0.46
200
0,75
150 2
0,5
100
A
0,25
50 11
50 Hz 60 Hz
196
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Variable
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: B CCC, GOST
– Options: With flange
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
backward
Mass of
Dimensions
Centrifugal blower Centrifugal blower kg I
without flange with flange
225
EC centrifugal,
forward
102
5
107
17
EC-SYSTEMS
87
241
Ø130
100,5
Accessories
400 I
197
Guard grille Capacitor Electr. connections
p. 555 p. 560 f. p. 596 f.
AC centrifugal blowers
dual inlet, Ø 180
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
[in H O]
2
300
1,00
250
200 A
0,75
2
150
0,50
100
0,25
50
1
50 Hz 60 Hz
198
information
General
– Motor protection: Without thermal protection
AC centrifugal,
– Cable exit: Variable
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
backward
Mass of
309
EC centrifugal,
296 255
forward
133 180
7
289
5˚
278
258
EC-SYSTEMS
180
224
6x
60
˚
333
3,2
Ø149
2
19
Accessories
136
600
199
Guard grille Electr. connections
p. 555 p. 596 f.
AC centrifugal blowers
dual inlet, Ø 180
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
[in H O]
2
300
B
1,00
250
200
0,75
2 2
150
0,50
A
100
0,25
50
1 1
50 Hz 60 Hz
200
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Variable
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC, A also GOST
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
backward
Mass of
Dimensions
Centrifugal blower Centrifugal blower kg C D E S
with flange with flange (large)
309
EC centrifugal,
296 255
forward
B Hole with large
133 flange only
180
7
289
5˚
EC-SYSTEMS
6x
D
C
60
˚
333
3,2
Ø 149
2
19
Accessories
136
600
201
Guard grille Capacitor Electr. connections
p. 555 p. 560 f. p. 596 f.
AC centrifugal blowers
dual inlet, Ø 200
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
[in H O]
2
300
B
1,0
250
200 2 2
150
0,5
100 1
50
1
50 Hz 60 Hz
202
information
General
– Motor protection: A without TOP, B TOP wired internally
AC centrifugal,
– Cable exit: Variable
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
backward
Mass of
341
EC centrifugal,
327
forward
287
146 180
7
321
5˚
EC-SYSTEMS
250
284
180
304
6x
60
˚
371
3,2
Ø 167
3
21
Accessories
151
600
203
Guard grille Capacitor Electr. connections
p. 555 p. 560 f. p. 596 f.
AC centrifugal blowers
dual inlet, Ø 225
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
[in H O]
A 1
2
400
1,5
300 2
1,0
200
0,5
100 1
50 Hz 60 Hz
204
information
General
– Motor protection: Without thermal protection
AC centrifugal,
– Cable exit: Variable
backward
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
backward
Mass of
341
EC centrifugal,
327
forward
287
158 180
7
321
5˚
304
284
180
EC-SYSTEMS
250
6x
60
˚
370
3,2
Ø194
2
24
Accessories
151
600
205
Guard grille Electr. connections
p. 555 p. 596 f.
AC centrifugal blowers
dual inlet, Ø 225
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C p. 596 f.
n P1 I
Curves [rpm] [W] [A]
[in H O]
2
250
B
A
200
150 2 C 1
0,5
100 1
1
50
50 Hz 60 Hz
206
information
General
– Motor protection: TOP wired internally
AC centrifugal,
– Cable exit: Variable
backward
– Protection class: I
– Capacitor: A B FPU (P2) acc. to IEC 252
– Product conforming to standards: EN 60335-1, CE
– Approvals: A B CCC, B GOST
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
backward
Mass of
Dimensions
Centrifugal blower Centrifugal blower kg A B C D E F I S
with flange with flange (large)
— D4E 225-CC01 -02 12.4 341.0 321.0 304.0 284.0 250.0 287.0 287.0 180.0
— D6E 225-FB07 -02 12.5 387.0 367.0 304.0 284.0 250.0 333.0 333.0 180.0
EC centrifugal,
327
forward
B C Hole with large F
158 flange only
180
7
B
5˚
EC-SYSTEMS
6x
D
S
C
60
˚
370
3,2
Ø194
2
24
Accessories
151
600
207
Guard grille Capacitor Electr. connections
p. 555 p. 560 f. p. 596 f.
AC centrifugal blowers
dual inlet, Ø 225
Electr. connection
Nominal voltage
Speed/rpm (1)
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A µF/VDB Pa °C p. 596 f.
n P1 I LpA
Curves [rpm] [W] [A] [dB(A)]
[in H O]
2
400
1,5
B
300 2 2
1,0
200
1 1
0,5
100
A
50 Hz 60 Hz
208
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Axial
backward
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: A GOST
– Options: 400 VAC ∆/Y for two speed steps available on request,
mounting brackets on request
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
backward
Mass of
Dimensions
Centrifugal blower Centrifugal blower kg C D E S
with flange with flange (large)
387
EC centrifugal,
327
forward
B Hole with large 333
158 flange only
180
7
367
5˚
EC-SYSTEMS
6x
D
S
C
60
˚
370
3,2
Ø194
2
24
Accessories
151
600
209
Guard grille Electr. connections
p. 555 p. 596 f.
AC centrifugal blowers
dual inlet, Ø 225
Electr. connection
Nominal voltage
Speed/rpm (1)
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A µF/VDB Pa °C p. 596 f.
n P1 I LpA
Curves [rpm] [W] [A] [dB(A)]
[in H O]
2
400
1,5
300 2 2
B
1,0
200
A
1 1
0,5
100
50 Hz 60 Hz
210
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Axial
backward
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: A GOST
– Options: Mounting brackets on request
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
backward
Mass of
Dimensions
Centrifugal blower Centrifugal blower kg C D E S
with flange with flange (large)
387
EC centrifugal,
327
forward
B Hole with large 333
158 flange only
180
7
367
5˚
EC-SYSTEMS
6x
D
S
C
60
˚
370
3,2
Ø194
2
24
Accessories
151
600
211
Guard grille Capacitor Electr. connections
p. 555 p. 560 f. p. 596 f.
AC centrifugal blowers
dual inlet, Ø 240
Electr. connection
Nominal voltage
Speed/rpm (1)
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A µF/VDB Pa °C p. 596 f.
n P1 I LpA
Curves [rpm] [W] [A] [dB(A)]
[in H O]
A 1
A
2
500
400
1,5
300 2
1,0
200
1
0,5
100
50 Hz 60 Hz
212
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Axial
backward
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Options: Mounting brackets on request
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
backward
Mass of
341
EC centrifugal,
327
forward
287
158 180
7
321
5˚
146
200
EC-SYSTEMS
180
90
3x1
2 0˚
370
Ø209
2
24
Accessories
151
600
213
Guard grille Capacitor Electr. connections
p. 555 p. 560 f. p. 596 f.
AC centrifugal blowers
dual inlet, Ø 250
Electr. connection
Nominal voltage
Speed/rpm (1)
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A µF/VDB Pa °C p. 596 f.
n P1 I LpA
Curves [rpm] [W] [A] [dB(A)]
[in H O]
A 1
2
500
B 2 1370 675 1.43 69
400
1,5
2 2
B
300
A
1,0
200 1 1
0,5
100
50 Hz 60 Hz
214
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Axial
backward
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Options: 400 VAC ∆/Y for two speed steps available on request,
mounting brackets on request
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
backward
Mass of
Dimensions
Centrifugal blower Centrifugal blower kg C D E S U
with flange with flange (large)
349
328
EC centrifugal,
387 298
forward
B Hole with large
194 flange only
180
329
6x6
EC-SYSTEMS
C
D
U
0˚
392
3,2
Ø 200
5
27
Accessories
173
600
215
Guard grille Electr. connections
p. 555 p. 596 f.
AC centrifugal blowers
dual inlet, Ø 250
Electr. connection
Nominal voltage
Speed/rpm (1)
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A µF/VDB Pa °C p. 596 f.
n P1 I LpA
Curves [rpm] [W] [A] [dB(A)]
[in H O]
2
500
B 2 1370 788 3.94 69
400
1,5
B
2 2
300
A
1,0
200 1 1
0,5
100
50 Hz 60 Hz
216
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Axial
backward
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: B GOST
– Options: Mounting brackets on request
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
backward
Mass of
Dimensions
Centrifugal blower Centrifugal blower kg C D E S U
with flange with flange (large)
349
328
EC centrifugal,
387 298
forward
B Hole with large
194 flange only
180
329
6x6
EC-SYSTEMS
C
D
U
0˚
392
3,2
Ø 200
5
27
Accessories
173
600
217
Guard grille Capacitor Electr. connections
p. 555 p. 560 f. p. 596 f.
AC centrifugal blowers
dual inlet, Ø 250
Electr. connection
Nominal voltage
Speed/rpm (1)
Max. current
Max. power
Frequency
Capacitor
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A µF/VDB Pa °C p. 596 f.
n P1 I LpA
Curves [rpm] [W] [A] [dB(A)]
[in H O]
2
250
B 2 900 304 1.45 57
200 B
0,75
2 2
150
0,5
100 1 1
0,25
50
50 Hz 60 Hz
218
information
General
– Motor protection: Design with thermal overload protector
AC centrifugal,
– Cable exit: Axial
backward
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Options: Mounting brackets on request
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
backward
Mass of
Dimensions
Centrifugal blower Centrifugal blower kg C D E S U
with flange with flange (large)
349
328
EC centrifugal,
387 298
forward
B Hole with large
194 flange only
180
329
6x6
EC-SYSTEMS
C
D
U
0˚
392
3,2
Ø 200
5
27
Accessories
173
600
219
Guard grille Capacitor Electr. connections
p. 555 p. 560 f. p. 596 f.
220
information
General
EC centrifugal fans backward curved
EC centrifugal fans with plastic impeller, 24 / 48 VDC Ø 120 - Ø 250 222
AC centrifugal,
EC centrifugal fans with sheet steel impeller, 24 / 48 VDC Ø 250 - Ø 280 240
backward
EC centrifugal fans with aluminium impeller, 24 / 48 VDC Ø 310 - Ø 400 246
EC centrifugal fans with sheet steel impeller, line-fed Ø 250 - Ø 280 296
AC centrifugal,
forward
EC centrifugal fans with aluminium impeller, line-fed Ø 310 - Ø 630 316
EC centrifugal,
backward
ward for clean rooms
EC centrifugal, back-
EC centrifugal,
forward
EC-SYSTEMS
Accessories
Technology
Contacts
221
EC centrifugal fans
backward curved, Ø 120
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Nominal data
Type Motor VDC VDC m3/h rpm W A dB(A) °C p. 600
R1G 120 M1G 045-BE A 24 16-28 250 4060 26 1.20 62 -25 to +50 G)
R1G 120 M1G 045-BE A 48 36-57 250 4060 26 0.60 62 -25 to +50 G)
subject to alterations
n P1 LpA tL
Curves [rpm] [W] [dB(A)] [%]
A 1’ 4520 36 65 —
[Pa]
A
A 2’ 4500 36 64 27
400 A 3’ 4540 36 61 45
1,5
A 4’ 4750 32 64 39
A 1 4060 26 62 —
4' A 2 4000 26 61 27
300 A 3 4050 26 58 45
A 4 4200 23 61 39
4
1,0
A 5 3270 14 56 —
3'
UR
A 6 3250 14 55 27
200 A 7 3280 14 53 45
3
8
A 8 3400 13 56 39
UN
0,5
100
2'
2
5 1 1'
0 25 50 75 100 125 [CFM]
222
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Reverse polarity and locked-rotor protection
backward
– Cable exit: Axial
– Protection class: I
– Product conforming to standard: EN 60950-1
– Approvals: A (48 VDC) CCC
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
54 ±1 18
45,3 ±0,5 Depth of screw
max. 4 mm
EC centrifugal,
forward
M4
15
16
0,
±
47
Ø146
Ø 59
Ø 98
EC-SYSTEMS
17
6
60
300 ±20 4x90˚
26 2
Accessories
40,5
Technology
Contacts
223
Inlet nozzle Electr. connection
p. 550 p. 600
EC centrifugal fans
backward curved, Ø 133
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Nominal data
Type Motor VDC VDC m3/h rpm W A dB(A) °C p. 600
R1G 133 M1G 055-BD A 24 16-28 360 3900 28 1.30 63 -25 to +60 G)
R1G 133 M1G 055-BD A 48 36-57 360 3900 28 0.70 63 -25 to +60 G)
subject to alterations
n P1 LpA tL
Curves [rpm] [W] [dB(A)] [%]
A 1’ 4450 39 74 —
[Pa]
[in H O]
2
A
A 2’ 4250 44 60 45
500
A 3’ 4270 44 59 56
A 4’ 4380 41 61 44
A 1 3900 28 63 —
400 A 2 3770 31 58 45
1,5
4' UR A 3 3770 31 56 56
UN A 4 3850 29 58 44
300 A 5 3500 20 59 —
4
3' A 6 3380 23 55 45
1,0
A 7 3400 23 53 56
8
3 A 8 3450 21 55 44
200
7
A 9 2970 13 55 —
12 2'
A 10 2860 15 51 45
0,5
11 2 A 11 2880 15 49 56
100 6 A 12 2930 14 51 44
10
9 5 1 1'
0 50 100 150 200 [CFM]
224
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Reverse polarity and locked-rotor protection
backward
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
– Cable exit: Variable
– Protection class: I
– Product conforming to standard: EN 60950-1
– Approvals: UL, CSA, A (48 VDC) with CCC
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
91±1
55,3 ±0,6 13 Ø 58 ±0,15
EC centrifugal,
forward
8
Ø129
Ø 87
Ø72
29
EC-SYSTEMS
6
85 M4
450 +20
41 2 Depth of screw
60,6 max. 6 mm
Accessories
Technology
Contacts
225
Inlet nozzle Electr. connection
p. 550 p. 600
EC centrifugal fans
backward curved, Ø 175
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Nominal data
Type Motor VDC VDC m3/h rpm W A dB(A) °C p. 600
R1G 175 M1G 055-BD A 24 16-28 565 3100 34 1.60 65 -25 to +60 G)
R1G 175 M1G 055-BD A 48 36-57 565 3100 34 1.00 65 -25 to +60 G)
subject to alterations
n P1 LpA tL
Curves [rpm] [W] [dB(A)] [%]
A 1’ 3390 46 67 —
[Pa]
[in H O]
A
2
A 2’ 3200 51 60 49
A 3’ 3170 51 58 58
A 4’ 3300 51 66 39
400
3100 34 65 —
1,5
A 1
A 2 2910 39 58 49
4'
UR
A 3 2880 39 56 58
300 A 4 3010 37 64 39
4
UN
A 5 2520 20 60 —
1,0
3' A 6 2430 22 54 51
A 7 2390 23 51 58
200 3
8
A 8 2470 21 60 39
A 9 2050 12 56 —
7 A 10 1950 13 50 51
0,5
12 2'
2
A 11 1920 13 56 58
100
11 A 12 1990 12 53 40
6
10
9 5 1 1'
0 100 200 300 [CFM]
226
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Reverse polarity and locked-rotor protection
backward
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
– Cable exit: Variable
– Protection class: I
– Product conforming to standard: EN 60950-1
– Approvals: UL, CSA, A (48 VDC) with VDE, CCC
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
69 ±1
55,3 ±1 14 58 ±0,15
EC centrifugal,
forward
10
Ø170
Ø131
Ø175
EC-SYSTEMS
Ø72
6
29
M4
85
450 ±20
Depth of screw
Accessories
2
42 max. 6 mm
62
Technology
Contacts
227
Inlet nozzle Electr. connection
p. 550 p. 600
EC centrifugal fan
backward curved, Ø 175
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Nominal data
Type Motor VDC VDC m3/h rpm W A dB(A) °C p. 600
R1G 175 M1G 055-CF A 48 36-52 695 4000 75 1.75 72 -25 to +40 G)
subject to alterations
n P1 LpA tL
Curves [rpm] [W] [dB(A)] [%]
A 1’ 4250 88 73 —
[Pa]
[in H O]
A
2
A 2’ 4130 93 71 39
A 3’ 4050 96 67 55
2,5
A 4’ 4130 93 72 43
600
A 1 4000 75 72 —
U52V
A 2 3920 80 69 39
500
2,0
4' A 3 3880 83 66 55
4
A 4 3920 80 71 43
400 A 5 3290 42 67 —
1,5
UN A 6 3250 45 64 39
3' A 7 3160 47 62 55
300 8 3 A 8 3250 46 66 43
1,0
200 7
2'
2
0,5
100 6
5 1 1'
0 100 200 300 [CFM]
228
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Reverse polarity and locked-rotor protection
backward
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
– Cable exit: Variable
– Protection class: I
– Product conforming to standard: EN 60950-1
– Approvals: CCC
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
69 ±1
67 ±1 14 58 ±0,15
EC centrifugal,
forward
10
Ø170
Ø131
Ø175
EC-SYSTEMS
Ø72
6
29
M4
85
450 ±20
Depth of screw
Accessories
2
42 max. 6 mm
62
Technology
Contacts
229
Inlet nozzle Electr. connection
p. 550 p. 600
EC centrifugal fans
backward curved, Ø 190
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Nominal data
Type Motor VDC VDC m3/h rpm W A dB(A) °C p. 600
R1G 190 M1G 055-CF A 24 16-28 620 2950 51 2.30 68 -25 to +40 G)
R1G 190 M1G 055-CF A 48 36-57 620 2950 51 1.20 68 -25 to +40 G)
subject to alterations
n P1 LpA tL
Curves [rpm] [W] [dB(A)] [%]
A 1’ 3300 71 70 —
[Pa]
[in H O]
A
2
600 A 2’ 3200 75 66 45
A 3’ 3160 77 63 53
A 4’ 3290 72 67 42
2,0
500 A 1 2950 51 68 —
A 2 2870 54 63 45
A 3 2830 56 60 53
4'
400 A 4 2940 51 63 42
1,5
UR
A 5 2390 28 62 —
4 A 6 2340 30 58 45
300
UN 3'
A 7 2320 31 54 53
2390 28 58 42
1,0
A 8
3
8
200
7 2'
0,5
2
100
6
5 1 1'
0 100 200 300 400 [CFM]
230
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Reverse polarity and locked-rotor protection
backward
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
– Cable exit: Variable
– Protection class: I
– Product conforming to standard: EN 60950-1
– Approvals: UL, CSA, A (48 VDC) with CCC
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
68,5 ±1
67 ±0,6 14 Ø58 ±0,15
EC centrifugal,
forward
10
Ø125,5
Ø170
Ø72
EC-SYSTEMS
29
6
85
M4
450 +20
Depth of screw
Accessories
231
Inlet nozzle Electr. connection
p. 550 p. 600
EC centrifugal fans
backward curved, Ø 190
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Nominal data
Type Motor VDC VDC m3/h rpm W A dB(A) °C p. 600
R1G 190 M1G 074-BF A 24 16-28 560 3250 80 3.70 68 -25 to +60 G)
R1G 190 M1G 074-BF A 48 36-57 545 3200 71 1.65 68 -25 to +60 G)
subject to alterations
n P1 LpA tL
Curves (established at 24 VDC) [rpm] [W] [dB(A)] [%]
A 1’ 3580 106 71 —
[Pa]
[in H O]
A
2
A 2’ 3590 105 66 41
700 A 3’ 3630 103 65 45
A 4’ 3770 97 69 33
2,5
600 A 1 3250 80 68 —
4' UR A 2 3275 80 64 42
A 3 3300 79 63 45
2,0
500
A 4 3400 74 66 34
4
3' A 5 2700 47 65 —
400 A 6 2710 47 59 41
1,5
UN 3 A 7 2740 45 58 44
300 8 A 8 2795 42 61 33
2'
A 9 1910 19 60 —
1,0
7 2
A 10 1910 20 51 39
200
A 11 1940 19 49 43
12
6
A 12 1985 18 52 33
0,5
11
100
10
9 5 1 1'
0 50 100 150 200 250 300 [CFM]
232
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Reverse polarity and locked-rotor protection
backward
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
– Cable exit: Variable
– Protection class: I
– Product conforming to standard: EN 60950-1
– Approvals: UL, CSA, A (48 VDC) with CCC
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
68,5 ±1
65 ±1 14 Ø58 ±0,15
EC centrifugal,
forward
10
Ø125,5
Ø170
Ø92
EC-SYSTEMS
32,7
6
85
M4
450 +20
Depth of screw
Accessories
233
Inlet nozzle Electr. connection
p. 550 p. 600
EC centrifugal fans
backward curved, Ø 220
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Nominal data
Type Motor VDC VDC m3/h rpm W A dB(A) °C p. 600
R1G 220 M1G 074-BF A 24 16-28 1055 3150 106 5.00 76 -25 to +60 G)
R1G 220 M1G 074-BF A 48 36-57 1015 3100 100 2.40 73 -25 to +60 G)
subject to alterations
n P1 LpA tL
Curves (established at 24 VDC) [rpm] [W] [dB(A)] [%]
A 1’ 3400 128 78 —
[Pa]
[in H O]
A
2
A 2’ 3200 132 69 53
800 A 3’ 3050 135 67 55
3,0
A 4’ 3000 137 71 46
700 A 1 3150 106 76 —
A 2 3010 110 68 53
600 A 3 2870 112 65 55
A 4 2800 113 69 46
2,0
500 A 5 2470 50 70 —
UR
4' A 6 2360 54 63 53
UN
400 4 A 7 2300 57 59 55
A 8 2250 59 63 46
3'
300 3
1,0
8
2'
200 7 2
6
100
5 1 1'
0 200 400 600 [CFM]
234
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Reverse polarity and locked-rotor protection
backward
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
– Cable exit: Variable
– Protection class: I
– Product conforming to standard: EN 60950-1
– Approvals: UL, CSA, A (48 VDC) with CCC
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
71±1
65 ±1 21 Ø58 ±0,15
EC centrifugal,
forward
22
Ø252
Ø155
Ø92
EC-SYSTEMS
32,7
6
85
M4
450 +20
Depth of screw
Accessories
min. 44 2 max. 6 mm
max. 64
Technology
Contacts
235
Inlet nozzle Electr. connection
p. 550 p. 600
EC centrifugal fans
backward curved, Ø 225
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Nominal data
Type Motor VDC VDC m3/h rpm W A dB(A) °C p. 600
R1G 225 M1G 074-BF A 24 16-28 1125 2600 100 4.60 67 -25 to +60 G)
R1G 225 M1G 074-BF A 48 36-57 1130 2700 95 2.20 67 -25 to +60 G)
subject to alterations
n P1 LpA tL
Curves (established at 48 VDC) [rpm] [W] [dB(A)] [%]
A 1’ 2780 112 69 —
[Pa]
[in H O]
A
2
A 2’ 2610 116 64 48
700 A 3’ 2570 117 62 57
A 4’ 2780 112 66 42
600 A 1 2700 95 67 —
A 2 2450 93 63 48
A 3 2400 94 60 57
500
2,0
A 4 2610 91 64 42
UR
4' A 5 2230 59 63 —
400 A 6 2150 63 58 48
4
A 7 2100 64 56 57
300
A 8 2230 58 58 42
8 3'
UN
1,0
200
7
2'
2
6
100
5 1 1'
0 200 400 600 [CFM]
236
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Reverse polarity and locked-rotor protection
backward
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
– Cable exit: Variable
– Protection class: I
– Product conforming to standard: EN 60950-1
– Approvals: UL, CSA, A (48 VDC) with CCC
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
99±1
65±1 28 Ø58±0,15
EC centrifugal,
forward
25
Ø223
Ø146
Ø92
EC-SYSTEMS
6
32,7
85
450 +20 M4
2
max. 89,4 max. 6 mm
Technology
Contacts
237
Inlet nozzle Electr. connection
p. 550 p. 600
EC centrifugal fans
backward curved, Ø 250
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Nominal data
Type Motor VDC VDC m3/h rpm W A dB(A) °C p. 600
R1G 250 M1G 074-CF A 24 16-28 1140 2540 93 4.30 73 -25 to +60 G)
R1G 250 M1G 074-CF A 48 36-57 1200 2600 105 2.55 72 -25 to +60 G)
subject to alterations
n P1 LpA tL
Curves (established at 48 VDC) [rpm] [W] [dB(A)] [%]
A 1’ 2870 134 75 —
[in H O]
[Pa]
A
2
A 2’ 2610 139 68 55
700 A 3’ 2530 140 63 58
A 4’ 2650 138 66 48
A 4 2490 112 64 48
4' UR
A 5 2190 59 68 —
400 4 A 6 2020 67 62 55
A 7 2020 70 57 58
300
3' A 8 2070 66 59 48
8 3
UN
1,0
200 7
2'
2
100 6
5 1 1'
0 200 400 600 [CFM]
238
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Reverse polarity and locked-rotor protection
backward
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
– Cable exit: Variable
– Protection class: I
– Product conforming to standard: EN 60950-1
– Approvals: UL, CSA, A (48 VDC) with CCC
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
31
EC centrifugal,
89 ±1
forward
75 ±1 58 ±0,15
28
Ø164,5
Ø255
Ø92
EC-SYSTEMS
31
6
M4
85
450+20
min. 44,5
Depth of screw
Accessories
239
Inlet nozzle Electr. connection
p. 550 p. 600
EC centrifugal fan
backward curved, Ø 250
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Nominal data
Type Motor VDC VDC m3/h rpm W A dB(A) °C p. 600
R3G 250 M3G 084-CA A 48 36-57 1580 2645 135 2.80 72 -25 to +60 G)
subject to alterations
n P1 LpA tL
Curves [rpm] [W] [dB(A)] [%]
A 1’ 3055 207 75 —
[Pa]
[in H O]
A
2
A 2’ 2990 256 70 45
800 A 3’ 2970 274 68 60
UR
3,0
A 4’ 2980 270 71 55
700
A 1 2645 135 72 —
A 2 2600 166 67 45
2,5
500 A 5 1900 56 66 —
4
3' A 6 1875 69 59 45
400 A 7 1870 73 56 60
1,5
A 8 1870 72 58 55
3
300 A 9 835 9 48 —
1,0
8
A 10 830 10 44 45
2'
200 A 11 830 11 43 60
7
2 A 12 830 10 35 55
0,5
100
6
12
11
10
9 5 1 1'
0 200 400 600 800 1000 [CFM]
240
information
General
– Technical features: • Over-temperature protected motor
AC centrifugal,
• Control input 0-10 VDC / PWM • Reverse polarity and locked-rotor protection
backward
• Tach output
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
– Cable exit: Variable
– Protection class: I
– Product conforming to standard: EN 60950-1
AC centrifugal,
– Approvals: UL, CSA, CCC
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
Depth of screw
106,5 ±1,8 12-14 mm
EC centrifugal,
77 ±1 31
forward
90
±0
,1
5
28
M5
Ø164,5
0
Ø255
Ø172
Ø252
Ø102
+2
EC-SYSTEMS
0
60
34
85
8
min. 55,7
2
Accessories
max. 85,2
Core-end sleeves
Technology
Contacts
241
Inlet nozzle Electr. connection
p. 550 p. 600
EC centrifugal fans
backward curved, Ø 280
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Nominal data
Type Motor VDC VDC m3/h rpm W A dB(A) °C p. 600
R1G 280 M1G 074-CF A 24 16-28 1750 1710 95 4.60 71 -25 to +60 G)
R1G 280 M1G 074-CF A 48 36-57 1750 1710 95 2.30 71 -25 to +60 G)
subject to alterations
n P1 LpA tL
Curves [rpm] [W] [dB(A)] [%]
A 1’ 1840 118 72 —
[Pa]
[in H O]
2
A
A 2’ 1650 127 64 55
500
A 3’ 1670 126 62 55
A 4’ 1950 114 67 31
A 1 1710 95 71 —
400
A 2 1550 100 63 55
1,5
A 3 1560 100 59 55
4'
A 4 1810 91 64 31
UR
300 4 A 5 1470 60 67 —
A 6 1360 68 60 55
1,0
A 7 1370 67 55 55
3'
8 UN A 8 1530 56 59 31
200 3
7
0,5
2'
100 2
6
5 1 1'
0 200 400 600 800 1000 [CFM]
242
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Reverse polarity and locked-rotor protection
backward
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
– Cable exit: Variable
– Protection class: I
– Product conforming to standard: EN 60950-1
– Approvals: UL, CSA, A (48 VDC) with CCC
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
35
EC centrifugal,
125 ±1
forward
75 ±1 58 ±0,15
31
Ø182,5
Ø280
Ø92
EC-SYSTEMS
31
6
M4
85
450 +20
min. 79,7
Depth of screw
Accessories
243
Inlet nozzle Electr. connection
p. 550 p. 600
EC centrifugal fan
backward curved, Ø 280
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Nominal data
Type Motor VDC VDC m3/h rpm W A dB(A) °C p. 600
R3G 280 M3G 084-CA A 48 36-57 2020 1965 123 2.60 70 -25 to +60 G)
subject to alterations
n P1 LpA tL
Curves [rpm] [W] [dB(A)] [%]
A 1’ 2265 187 72 —
[Pa]
[in H O]
A
2
A 2’ 2185 243 68 53
A 3’ 2165 258 65 60
500
2,0
A 4’ 2230 213 69 50
UR
4' A 1 1965 123 70 —
A 2 1905 160 65 53
400 A 3 1885 171 61 60
1,5
UN A 4 1940 140 66 50
4 3'
A 5 1390 46 63 —
300 A 6 1365 61 58 53
3 A 7 1360 65 53 60
1,0
A 8 1380 53 55 50
2'
200 A 9 800 12 53 —
8
2
A 10 790 15 48 53
7 A 11 785 15 42 60
0,5
100 A 12 795 13 41 50
6
12
11
10
9 5 1 1'
0 200 400 600 800 1000 1200 [CFM]
244
information
General
– Technical features: • Over-temperature protected motor
AC centrifugal,
• Control input 0-10 VDC / PWM • Reverse polarity and locked-rotor protection
backward
• Tach output
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
– Cable exit: Variable
– Protection class: I
– Product conforming to standard: EN 60950-1
AC centrifugal,
– Approvals: UL, CSA
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
Depth of screw
121±1,8 12-14 mm
77±1
EC centrifugal,
35
forward
90
±0
,1
5
31
M5
Ø182,5
0
Ø280
Ø191
Ø281
Ø102
+2
EC-SYSTEMS
0
60
34
85
8
min. 79,7
2
Accessories
max. 112,5
Core-end sleeves
Technology
Contacts
245
Inlet nozzle Electr. connection
p. 550 p. 600
EC centrifugal fans
backward curved, 3-D, Ø 310
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Nominal data
Type Motor VDC VDC m3/h rpm W A dB(A) °C p. 600
R1G 310 M1G 074-CF A 24 16-28 1910 1600 90 4.20 64 -25 to +45 G)
R1G 310 M1G 074-CF A 48 36-57 1910 1600 90 2.20 64 -25 to +45 G)
subject to alterations
n P1 LpA tL
Curves (established with long inlet nozzle) [rpm] [W] [dB(A)] [%]
A 1’ 1720 113 66 —
[Pa]
[in H O]
A
2
A 2’ 1540 122 60 62
500
A 3’ 1490 124 59 67
A 4’ 1560 121 63 50
A 1 1600 90 64 —
400 A 2 1430 96 58 62
1,5
A 3 1390 99 58 67
A 4 1450 96 61 50
300 A 5 1150 69 60 —
4'
UR A 6 1260 65 55 62
1,0
4
A 7 1230 67 54 67
A 8 1270 65 58 50
200 3'
8 UN
3
7
0,5
2'
100 2
6
5 1 1'
0 200 400 600 800 1000 1200 [CFM]
246
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Reverse polarity and locked-rotor protection
backward
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
– Cable exit: Variable
– Protection class: I
– Product conforming to standard: EN 60950-1
– Approvals: UL, CSA, A (48 VDC) with CCC
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
EC centrifugal,
forward
75 ±1 18
55,5
5
,1
35
±0
Ø208,1
Ø211
Ø300
Ø92
EC-SYSTEMS
31
6
4x90˚
85
600 +20
Accessories
min. 69,5 2
max. 110,5
Technology
Contacts
247
Inlet nozzle Guard grille Electr. connection
p. 550 p. 553 p. 600
EC centrifugal fan
backward curved, 3-D, Ø 310
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Nominal data
Type Motor VDC VDC m3/h rpm W A dB(A) °C p. 600
R1G 310 M1G 074-CF A 48 36-52 2100 1800 120 3.00 67 -25 to +40 G)
subject to alterations
n P1 LpA tL
Curves (established with long inlet nozzle) [rpm] [W] [dB(A)] [%]
A 1’ 1895 130 67 —
[Pa]
[in H O]
A
2
A 2’ 1720 140 64 59
A 3’ 1610 147 60 67
500
2,0
A 4’ 1635 146 65 48
A 1 1800 120 67 —
A 2 1610 118 62 59
400 A 3 1530 122 58 67
1,5
A 4 1570 120 63 48
4'
A 5 1570 74 63 —
300 4 A 6 1430 80 58 59
A 7 1350 82 54 67
1,0
8 UN A 8 1400 80 60 48
3' U52 V
200 3
7
0,5
2'
100 2
6
5 1 1'
0 400 800 1200 [CFM]
248
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Reverse polarity and locked-rotor protection
backward
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
– Cable exit: Variable
– Protection class: I
– Product conforming to standard: EN 60950-1
– Approvals: UL, CSA, CCC
AC centrifugal,
forward
EC centrifugal,
centrifugal fan
backward
Mass of
EC centrifugal,
forward
75 ±1 18
55,5
5
,1
35
±0
Ø208,1
Ø211
Ø300
Ø92
EC-SYSTEMS
31
6
4x90˚
85
700 +20
Accessories
min. 69,5 2
max. 110,5
Technology
Contacts
249
Inlet nozzle Guard grille Electr. connection
p. 550 p. 553 p. 600
EC centrifugal fan
backward curved, 3-D, Ø 310
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Nominal data
Type Motor VDC VDC m3/h rpm W A dB(A) °C p. 600
R3G 310 M3G 084-FA A 48 36-57 2230 2000 190 4.00 71 -25 to +60 G)
subject to alterations
n P1 LpA tL
Curves (established with long inlet nozzle) [rpm] [W] [dB(A)] [%]
A 1’ 2395 271 74 —
[Pa]
[in H O]
A
2
A 2’ 2345 325 71 47
800 A 3’ 2320 362 70 60
3,0
A 4’ 2330 350 74 54
700 A 1 2070 178 71 —
A 2 2035 211 67 47
2,5
500 A 5 1445 66 61 —
4 A 6 1430 79 59 47
3'
400 A 7 1420 88 57 60
1,5
A 8 1420 85 62 54
300 3 A 9 930 23 50 —
925 26 48 47
1,0
A 10
8 2'
200 A 11 920 29 47 60
7 2 A 12 920 28 51 54
0,5
100 12
6
11
10
9 5 1 1'
0 400 800 1200 [CFM]
250
information
General
– Technical features: • Over-temperature protected motor
AC centrifugal,
• Control input 0-10 VDC / PWM • Reverse polarity and locked-rotor protection
backward
• Tach output
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
– Cable exit: Variable
– Protection class: I
– Product conforming to standard: EN 60950-1
AC centrifugal,
– Approvals: UL, CSA, CCC
forward
EC centrifugal,
centrifugal fan
backward
Mass of
EC centrifugal,
forward
90
107 ±1 18
±0
,1
5
55,5
35
M5
0
+2
Ø208,1
Ø211
Ø300
Ø102
Ø220
Ø318
EC-SYSTEMS
60
34
85
8
Accessories
251
Inlet nozzle Guard grille Electr. connection
p. 550 p. 553 p. 600
EC centrifugal fan
backward curved, 3-D, Ø 310
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Nominal data
Type Motor VDC VDC m3/h rpm W A dB(A) °C p. 600
R3G 310 M3G 084-FA A 48 36-57 2620 1930 208 4.35 69 -25 to +60 G)
subject to alterations
n P1 LpA tL
Curves (established with long inlet nozzle) [rpm] [W] [dB(A)] [%]
A 1’ 2230 317 72 —
[Pa]
[in H O]
A
2
A 2’ 2190 373 69 50
700 A 3’ 2150 415 66 66
A 4’ 2175 390 67 63
A 1 1930 208 69 —
2,4
600
4' UR A 2 1900 248 65 50
UN
A 3 1870 274 62 66
500 A 4 1890 257 61 63
1,8
4 3'
A 5 1290 69 59 —
400 A 6 1280 80 57 50
A 7 1270 90 55 66
3 A 8 1280 85 54 63
1,2
300
A 9 660 14 47 —
2' A 10 660 15 46 50
200 8
A 11 655 17 44 66
2
0,6
7 A 12 655 16 44 63
100
6
12
11
10
9 5 1 1'
0 400 800 1200 1600 2000 [CFM]
252
information
General
– Technical features: • Over-temperature protected motor
AC centrifugal,
• Control input 0-10 VDC / PWM • Reverse polarity and locked-rotor protection
backward
• Tach output
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
– Cable exit: Variable
– Protection class: I
– Product conforming to standard: EN 60950-1
AC centrifugal,
– Approvals: UL, CSA, CCC
forward
EC centrifugal,
centrifugal fan
backward
Mass of
EC centrifugal,
forward
90
107 ±1 18
±0
,1
5
55,5
35
M5
0
+2
Ø208,1
Ø211
Ø300
Ø102
Ø220
Ø318
EC-SYSTEMS
60
34
85
8
Core-end sleeves
Accessories
min. 100,5 2
max. 140,5
Technology
Contacts
253
Inlet nozzle Guard grille Electr. connection
p. 550 p. 553 p. 600
EC centrifugal fan
backward curved, 3-D, Ø 355
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Nominal data
Type Motor VDC VDC m3/h rpm W A dB(A) °C p. 600
R3G 355 M3G 084-FA A 48 36-57 2790 1560 178 3.70 69 -25 to +60 G)
subject to alterations
n P1 LpA tL
Curves (established with long inlet nozzle) [rpm] [W] [dB(A)] [%]
A 1’ 1800 272 73 —
[Pa]
2,5 [in H O]
A
2
A 2’ 1740 333 67 53
A 3’ 1725 355 67 65
600
A 4’ 1770 307 70 49
4' A 1 1560 178 69 —
UR
2,0
UN
A 6 1065 79 56 53
300
A 7 1055 85 54 65
3
A 8 1070 75 56 49
1,0
A 9 470 9 44 —
2'
200 8 A 10 450 10 42 53
2 A 11 450 11 40 65
7
0,5
A 12 455 10 40 49
100
6
12
11
10
9 5 1 1'
0 500 1000 1500 2000 [CFM]
254
information
General
– Technical features: • Over-temperature protected motor
AC centrifugal,
• Control input 0-10 VDC / PWM • Reverse polarity and locked-rotor protection
backward
• Tach output
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
– Cable exit: Variable
– Protection class: I
– Product conforming to standard: EN 60950-1
AC centrifugal,
– Approvals: UL, CSA, CCC
forward
EC centrifugal,
centrifugal fan
backward
Mass of
EC centrifugal,
forward
22
90
107 ±1 ,5
±0
,1
5
70
44
M5
20
Ø236,4
+
Ø240
Ø350
Ø102
Ø360
Ø250
EC-SYSTEMS
60
34
85
8
Accessories
255
Inlet nozzle Electr. connection
p. 550 p. 600
EC centrifugal fan
backward curved, 3-D, Ø 355
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Nominal data
Type Motor VDC VDC m3/h rpm W A dB(A) °C p. 600
R3G 355 M3G 084-FA A 48 36-57 3030 1410 168 3.50 66 -25 to +60 G)
subject to alterations
n P1 LpA tL
Curves (established with long inlet nozzle) [rpm] [W] [dB(A)] [%]
A 1’ 1630 257 70 —
[Pa]
[in H O]
A
2
A 2’ 1575 317 64 62
A 3’ 1570 321 63 66
2,0
A 4 1400 177 63 47
4 3'
UR A 5 1065 75 58 —
300 A 6 1045 93 55 62
3 A 7 1040 96 55 66
1,0
UN A 8 1060 79 56 47
2'
200 8 A 9 485 11 37 —
2
A 10 480 12 35 62
7
A 11 480 13 34 66
0,5
100 A 12 480 11 35 47
6
12
11
10
9 5 1 1'
0 500 1000 1500 2000 [CFM]
256
information
General
– Technical features: • Over-temperature protected motor
AC centrifugal,
• Control input 0-10 VDC / PWM • Reverse polarity and locked-rotor protection
backward
• Tach output
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
– Cable exit: Variable
– Protection class: I
– Product conforming to standard: EN 60950-1
AC centrifugal,
– Approvals: UL, CSA, CCC
forward
EC centrifugal,
centrifugal fan
backward
Mass of
EC centrifugal,
forward
22
90
107 ±1 ,5
±0
,1
5
70
44
M5
20
Ø236,4
+
Ø240
Ø350
Ø102
Ø360
Ø250
EC-SYSTEMS
60
34
85
8
Accessories
257
Inlet nozzle Electr. connection
p. 550 p. 600
EC centrifugal fan
backward curved, 3-D, Ø 400
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Nominal data
Type Motor VDC VDC m3/h rpm W A dB(A) °C p. 600
R3G 400 M3G 084-FA A 48 36-57 3000 1290 200 4.20 65 -25 to +60 G)
subject to alterations
n P1 LpA tL
Curves [rpm] [W] [dB(A)] [%]
A 1’ 1480 307 69 —
[Pa]
[in H O]
A
2
A 2’ 1450 340 68 44
A 3’ 1440 353 62 68
A 4’ 1480 309 67 55
500
2,0
A 1 1290 200 65 —
4'
A 2 1270 224 64 44
UR A 3 1260 234 59 68
400 A 4 1285 204 62 55
1,5
4
A 5 850 59 56 —
3'
UN A 6 840 67 54 44
300
A 7 835 71 51 68
3 A 8 850 62 53 55
1,0
A 9 435 11 43 —
200
A 10 435 12 41 44
8
2'
A 11 430 13 38 68
0,5
7
2 A 12 435 12 39 55
100
12 6
11
10
9 5 1 1'
0 500 1000 1500 2000 [CFM]
258
information
General
– Technical features: • Over-temperature protected motor
AC centrifugal,
• Control input 0-10 VDC / PWM • Reverse polarity and locked-rotor protection
backward
• Tach output
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
– Cable exit: Variable
– Protection class: I
– Product conforming to standard: EN 60950-1
AC centrifugal,
– Approvals: UL, CSA, CCC
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
Depth of screw
157±1,8 12-14 mm
66
EC centrifugal,
forward
90
107 ±1 22
±0
,1
5
50
90
M5
0
+2
Ø268
Ø404
Ø102
0
Ø257
Ø370
EC-SYSTEMS
60
34
85
8
Accessories
259
Inlet nozzle Guard grille Electr. connection
p. 550 p. 553 p. 600
EC centrifugal fan
backward curved, 3-D, Ø 400
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Nominal data
Type Motor VDC VDC m3/h rpm W A dB(A) °C p. 600
R3G 400 M3G 084-FA A 48 36-57 3300 1160 192 3.90 63 -25 to +60 G)
subject to alterations
n P1 LpA tL
Curves [rpm] [W] [dB(A)] [%]
A 1’ 1325 287 69 —
[Pa]
[in H O]
A
2
A 2’ 1300 340 66 43
500
A 3’ 1300 335 64 62
A 4’ 1345 268 68 53
4' A 1 1160 192 63 —
400 A 2 1140 227 62 43
1,5
UR
A 3 1140 210 59 62
A 4 1170 177 63 53
4
3'
300 A 5 795 62 57 —
A 6 784 74 56 43
1,0
3 A 7 780 69 56 62
UN
A 8 795 59 56 53
200
A 9 500 15 49 —
8
2' A 10 500 19 48 43
0,5
7 2
A 11 500 21 48 62
100 A 12 505 18 49 53
12 6
11
10
9 5 1 1'
0 500 1000 1500 2000 [CFM]
260
information
General
– Technical features: • Over-temperature protected motor
AC centrifugal,
• Control input 0-10 VDC / PWM • Reverse polarity and locked-rotor protection
backward
• Tach output
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
– Cable exit: Variable
– Protection class: I
– Product conforming to standard: EN 60950-1
AC centrifugal,
– Approvals: UL, CSA, CCC
forward
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
Depth of screw
180±1,8 12-14 mm
66
EC centrifugal,
forward
90
107 ±1 22
±0
,1
5
50
90
M5
0
+2
Ø268
Ø404
Ø102
0
Ø257
Ø370
EC-SYSTEMS
60
34
85
8
Core-end sleeves
Accessories
min. 112,3 4
max. 165
Technology
Contacts
261
Inlet nozzle Guard grille Electr. connection
p. 550 p. 553 p. 600
EC centrifugal fan
backward curved, Ø 133
Electr. connection
Nominal voltage
Max. current
Max. power
Speed/rpm
Frequency
draw(1)
input(1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 601
R3G 133 M3G 055-BD A 1~ 115 50/60 4350 50 0.80 -25 to +60 H1)
subject to alterations (1) Nominal data in operating point with maximum load and 115 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
A 1 4350 37 0.55 75 —
[Pa]
[in H O]
2
A
A 2 4310 41 0.60 74 39
500
A 3 4260 46 0.70 61 61
A 4 4340 41 0.60 60 45
A 5 4150 34 0.60 78 —
400
A 6 4090 36 0.60 69 31
1,5
A 7 4010 39 0.60 58 52
4
A 8 4080 34 0.60 58 47
300 8 A 9 3390 20 0.40 67 —
A 10 3350 22 0.40 58 30
1,0
3
A 11 3300 23 0.40 53 53
12
A 12 3350 22 0.40 53 46
200 7
A 13 2370 10 0.20 52 —
A 14 2360 11 0.20 49 30
11
0,5
A 15 2350 11 0.20 45 56
100 16
2 A 16 2370 11 0.20 44 46
6
15
10
14
13 9 5 1
0 50 100 150 200 250 [CFM]
262
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Locked-rotor protection
backward
• Output 10 VDC max. 1.1 mA
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, CE
– Approvals: GOST; VDE, UL, CSA, CCC are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
Depth of screw
max. 6 mm
EC centrifugal,
73±1
forward
26 84±1 13 M4
M4
8
max. Ø95
Ø58 ±0,15
Ø92,8
Ø129
Ø115
Ø133
Ø 87
Ø72
EC-SYSTEMS
450 +20
85
41 2 105±0,2
60,6
6
Accessories
263
Inlet nozzle Electr. connection
p. 550 p. 601
EC centrifugal fan
backward curved, Ø 133
Electr. connection
Nominal voltage
Max. current
Max. power
Speed/rpm
Frequency
draw(1)
input(1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 601
R3G 133 M3G 055-BD A 1~ 230 50/60 4480 52 0.40 -25 to +60 H1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
A 1 4480 43 0.30 75 —
[Pa]
[in H O]
2
A
A 2 4450 46 0.35 74 31
500
A 3 4390 49 0.40 61 51
A 4 4460 45 0.35 60 46
A 5 4150 34 0.30 78 —
400
A 6 4090 36 0.30 69 31
1,5
4 A 7 4010 39 0.30 58 52
A 8 4080 34 0.30 58 47
300 8 A 9 3390 20 0.20 67 —
A 10 3350 22 0.20 58 30
1,0
3 A 11 3300 23 0.20 53 53
12
A 12 3350 22 0.20 53 46
200 7
A 13 2370 10 0.10 52 —
A 14 2360 11 0.10 49 30
11
0,5
A 15 2350 11 0.10 45 56
100 16
2 A 16 2370 11 0.10 44 46
6
15
10
14
13 9 5 1
0 50 100 150 200 250 [CFM]
264
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Locked-rotor protection
backward
• Output 10 VDC max. 1.1 mA
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, CE
– Approvals: GOST; VDE, UL, CSA, CCC are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
Depth of screw
max. 6 mm
EC centrifugal,
73±1
forward
26 84±1 13 M4
M4
8
max. Ø95
Ø58 ±0,15
Ø92,8
Ø129
Ø115
Ø133
Ø 87
Ø72
EC-SYSTEMS
450 +20
85
41 2 105±0,2
60,6
6
Accessories
265
Inlet nozzle Electr. connection
p. 550 p. 601
EC centrifugal fan
backward curved, Ø 175
Electr. connection
Nominal voltage
Max. current
Max. power
Speed/rpm
Frequency
draw(1)
input(1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 601
R3G 175 M3G 055-CF A 1~ 115 50/60 3970 90 1.30 -25 to +60 H1)
subject to alterations (1) Nominal data in operating point with maximum load and 115 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
A 1 3970 72 1.10 72 —
[Pa]
[in H O]
A
2
4
A 9 2270 17 0.30 59 —
A 10 2240 20 0.35 54 38
300
A 11 2240 20 0.35 50 51
3
2240 21 0.35 50 50
1,0
A 12
8
200
A 13 1310 6 0.10 45 —
7 2
A 14 1295 7 0.10 40 40
A 15 1285 7 0.10 37 53
0,5
12
100 6 A 16 1290 7 0.10 35 54
11
10
16
15
14
13 9 5 1
0 100 200 300 400 [CFM]
266
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Locked-rotor protection
backward
• Output 10 VDC max. 1.1 mA
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, CE
– Approvals: GOST; VDE, UL, CSA, CCC are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
Depth of screw
max. 6 mm
85±1
EC centrifugal,
14 M4
forward
26 69±1 M4
10
max. Ø95
Ø58 ±0,15
Ø125,5
Ø115
Ø170
Ø131
Ø175
Ø72
EC-SYSTEMS
450+20
85
105±0,2
42 2
Accessories
62
Brass lead tips
Technology
Contacts
267
Inlet nozzle Electr. connection
p. 550 p. 601
EC centrifugal fan
backward curved, Ø 175
Electr. connection
Nominal voltage
Max. current
Max. power
Speed/rpm
Frequency
draw(1)
input(1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 601
R3G 175 M3G 055-CF A 1~ 230 50/60 4460 120 1.00 -25 to +60 H1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
[in H O]
2
A
A 2 4350 112 0.80 69 57
700 A 3 4300 115 0.85 66 68
A 4 4260 118 0.85 68 60
2,5
600
A 5 3800 65 0.50 71 —
A 6 3730 72 0.55 65 56
A 7 3710 76 0.55 74 66
2,0
8
3 A 11 3060 44 0.35 58 61
A 12 3040 45 0.35 59 58
300
7 A 13 2170 17 0.15 59 —
1,0
12
2 A 14 2150 18 0.15 54 40
200
11
A 15 2150 18 0.15 50 51
6
A 16 2130 19 0.15 50 48
0,5
16
100 10
15
14
13 9 5 1
0 100 200 300 400 [CFM]
268
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Locked-rotor protection
backward
• Output 10 VDC max. 1.1 mA
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, CE
– Approvals: VDE, UL, CSA, CCC, GOST are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
Depth of screw
max. 6 mm
85±1
EC centrifugal,
14 M4
forward
26 69±1 M4
10
max. Ø95
Ø58 ±0,15
Ø125,5
Ø115
Ø170
Ø131
Ø175
Ø72
EC-SYSTEMS
450+20
85
105±0,2
42 2
Accessories
62
Brass lead tips
Technology
Contacts
269
Inlet nozzle Electr. connection
p. 550 p. 601
EC centrifugal fan
backward curved, Ø 190
Electr. connection
Nominal voltage
Max. current
Max. power
Speed/rpm
Frequency
draw(1)
input(1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 601
R3G 190 M3G 055-CF A 1~ 115 50/60 3370 87 1.40 -25 to +60 H1)
subject to alterations (1) Nominal data in operating point with maximum load and 115 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
A 1 3370 76 1.10 70 —
[Pa]
[in H O]
A
2
4
A 9 2310 27 0.40 61 —
A 10 2285 29 0.50 56 42
300
3 A 11 2265 31 0.50 55 52
2260 32 0.50 52 53
1,0
A 12
8
200
A 13 1780 15 0.20 58 —
7
A 14 1760 16 0.30 52 35
2 1750 0.30
A 15 17 48 43
0,5
12
100
A 16 1745 17 0.30 45 44
11 6
16 10
15
14
13 9 5 1
0 100 200 300 400 [CFM]
270
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Locked-rotor protection
backward
• Output 10 VDC max. 1.1 mA
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, CE
– Approvals: VDE, UL, CSA, CCC, GOST are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
Depth of screw
max. 6 mm
85±1
EC centrifugal,
26 69±1 M4
14
forward
M4
10
max. Ø95
Ø58 ±0,15
Ø125,5
EC-SYSTEMS
Ø131
Ø190
Ø170
Ø115
Ø72
450 +20
85
44,6 105±0,2
Accessories
2
62,8
Brass lead tips
Technology
Contacts
271
Inlet nozzle Electr. connection
p. 550 p. 601
EC centrifugal fan
backward curved, Ø 190
Electr. connection
Nominal voltage
Max. current
Max. power
Speed/rpm
Frequency
draw(1)
input(1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 601
R3G 190 M3G 055-CF A 1~ 230 50/60 3570 105 0.90 -25 to +60 H1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
A 1 3570 90 0.65 72 —
[Pa]
[in H O]
2
A
A 2 3490 96 0.70 66 47
A 3 3440 101 0.75 64 57
600
A 4 3410 102 0.75 62 59
A 5 2950 51 0.40 65 —
2,0
4 A 10 2480 36 0.30 58 43
A 11 2470 39 0.30 57 53
300
A 12 2450 40 0.30 54 56
1,0
3
8
A 13 1940 18 0.15 57 —
200 A 14 1920 19 0.15 54 37
12
7
2 A 15 1900 20 0.15 51 46
1890 22 0.15 47 48
0,5
11 A 16
16 6
100
15 10
14
13 9 5 1
0 100 200 300 400 [CFM]
272
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Locked-rotor protection
backward
• Output 10 VDC max. 1.1 mA
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, CE
– Approvals: VDE, UL, CSA, CCC, GOST are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
Depth of screw
max. 6 mm
85±1
EC centrifugal,
26 69±1 M4
14
forward
M4
10
max. Ø95
Ø58 ±0,15
Ø125,5
EC-SYSTEMS
Ø131
Ø190
Ø170
Ø115
Ø72
450 +20
85
44,6 105±0,2
Accessories
2
62,8
Brass lead tips
Technology
Contacts
273
Inlet nozzle Electr. connection
p. 550 p. 601
EC centrifugal fan
backward curved, Ø 190
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw(1)
input(1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 603
R3G 190 M3G 074-BF A 1~ 100-130 50/60 3960 170 2.50 -25 to +60 J1)
subject to alterations (1) Nominal data in operating point with maximum load and 115 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
[in H O]
2
A
A 2 3940 149 1.90 71 32
800 A 3 3900 156 2.00 68 48
A 4 4000 147 1.90 69 43
700 A 5 3430 94 1.20 70 —
A 6 3370 95 1.30 66 31
2,5
A 12 2830 57 0.80 60 39
300 12
7 A 13 1960 24 0.40 58 —
1950 25 0.40 56 23
1,0
A 14
6
100 15
10
14
13 9 5 1
0 100 200 300 400 [CFM]
274
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Tach output
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE
– Approvals: UL, CSA, CCC, GOST are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
EC centrifugal,
109 ±1,5 Depth of screw 8-10 mm
forward
106 ±1,5
76,5 ±1 M4
14
M4
M4
EC-SYSTEMS
10
max. Ø115,3
min. Ø131
max. Ø190
Ø133 ±0,3
Ø125,5
Ø92
4x90˚
Ø170
8
Ø5
Accessories
Ø 1 90
Ø
25
45˚
8 0 min. 44,3 2
+2
0
85 45 max. 62,8
Technology
Core-end sleeves
Contacts
275
Inlet nozzle Electr. connection
p. 550 p. 603
EC centrifugal fan
backward curved, Ø 190
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw(1)
input(1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 603
R3G 190 M3G 074-BF A 1~ 200-277 50/60 4050 156 1.15 -25 to +60 J1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
[in H O]
2
A
A 2 4040 156 1.10 72 35
800 A 3 4010 155 1.10 69 52
3,0
3 A 10 2915 63 0.50 64 33
400 A 11 2900 63 0.50 60 52
12
A 12 2930 60 0.50 61 42
7
300 A 13 2040 27 0.20 59 —
1,0
11
A 14 2050 27 0.20 56 33
200 A 15 2040 27 0.20 51 51
2
16 A 16 2060 26 0.20 51 39
6
15
100 10
14
13 9 5 1
0 100 200 300 400 [CFM]
276
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Tach output
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE
– Approvals: UL, CSA; CCC, GOST are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
EC centrifugal,
109 ±1,5 Depth of screw 8-10 mm
forward
106 ±1,5
76,5 ±1 M4
14
M4
M4
EC-SYSTEMS
10
max. Ø115,3
min. Ø131
max. Ø190
Ø133 ±0,3
Ø125,5
Ø92
4x90˚
Ø170
8
Ø5
Accessories
Ø 1 90
Ø
25
45˚
8 0 min. 44,3 2
+2
0
85 45 max. 62,8
Technology
Core-end sleeves
Contacts
277
Inlet nozzle Electr. connection
p. 550 p. 603
EC centrifugal fan
backward curved, Ø 220
Electr. connection
Nominal voltage
Max. current
Max. power
Speed/rpm
Frequency
draw(1)
input(1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 601
R3G 220 M3G 055-CF A 1~ 115 50/60 2620 75 1.10 -25 to +60 H1)
subject to alterations (1) Nominal data in operating point with maximum load and 115 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
A 1 2620 55 0.80 69 —
[Pa]
[in H O]
A
2
A 2 2480 64 1.00 67 55
A 3 2370 71 1.00 59 63
A 4 2450 66 1.00 63 47
400
A 5 2340 40 0.60 67 —
1,5
A 6 2260 48 0.70 64 53
A 7 2200 53 0.80 57 62
300 A 8 2250 51 0.80 59 47
4
A 9 1890 22 0.40 64 —
1,0
A 10 1820 27 0.40 60 48
A 11 1790 30 0.50 52 60
200 A 12 1820 28 0.40 55 45
8 3
A 13 1180 8 0.20 56 —
A 14 1150 9 0.20 52 34
0,5
7
12
A 15 1130 10 0.20 42 44
100
2
A 16 1150 10 0.20 43 33
11
6
16
10
15
14
13 9 5 1
0 200 400 600 [CFM]
278
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Locked-rotor protection
backward
• Output 10 VDC max. 1.1 mA
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, CE
– Approvals: VDE, UL, CSA, CCC, GOST are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
Depth of screw
max. 6 mm
85±1
EC centrifugal,
26 71±1 M4
forward
21 M4
22
max. Ø95
Ø58 ±0,15
EC-SYSTEMS
Ø159
Ø220
Ø155
Ø252
Ø115
Ø72
450 +20
85
44 105±0,2
Accessories
2
64
Brass lead tips
Technology
Contacts
279
Inlet nozzle Electr. connection
p. 550 p. 601
EC centrifugal fan
backward curved, Ø 220
Electr. connection
Nominal voltage
Max. current
Max. power
Speed/rpm
Frequency
draw(1)
input(1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 601
R3G 220 M3G 055-CF A 1~ 230 50/60 3030 105 0.80 -25 to +60 H1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
A 1 3030 80 0.60 71 —
[Pa]
[in H O]
2
A
A 2 2880 93 0.70 68 57
A 3 2750 102 0.75 62 64
2,0
A 8 2500 70 0.55 63 48
8
A 9 2150 30 0.25 65 —
300 A 10 2070 36 0.30 62 54
3
A 11 2010 41 0.30 55 62
1,0
A 12 2060 39 0.30 57 48
7
12
200 A 13 1340 10 0.10 58 —
A 14 1310 12 0.10 55 38
11
A 15 1280 13 0.10 48 48
0,5
2
100 A 16 1300 13 0.10 45 36
6
16
15 10
14
13 9 5 1
0 200 400 600 [CFM]
280
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Locked-rotor protection
backward
• Output 10 VDC max. 1.1 mA
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, CE
– Approvals: UL, CSA, CCC, GOST are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
Depth of screw
max. 6 mm
85±1
EC centrifugal,
26 71±1 M4
forward
21 M4
22
max. Ø95
Ø58 ±0,15
EC-SYSTEMS
Ø159
Ø220
Ø155
Ø252
Ø115
Ø72
450 +20
85
44 105±0,2
Accessories
2
64
Brass lead tips
Technology
Contacts
281
Inlet nozzle Electr. connection
p. 550 p. 601
EC centrifugal fan
backward curved, Ø 220
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw(1)
input(1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 603
R3G 220 M3G 074-CF A 1~ 100-130 50/60 3590 160 2.50 -25 to +60 J1)
subject to alterations (1) Nominal data in operating point with maximum load and 115 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
[in H O]
2
A
A 2 3360 164 2.10 70 47
800 A 3 3260 160 2.00 66 58
3,0
A 12 2330 61 0.90 60 44
300 7 A 13 1590 21 0.30 60 —
12
1520 23 0.30 52 31
1,0
2 A 14
16 10
100
15
14
13 9 5 1
0 200 400 600 [CFM]
282
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Tach output
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE
– Approvals: UL, CSA, CCC, GOST are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
EC centrifugal,
107,5 ±1,5 Depth of screw 8-10 mm
forward
104,5 ±1,5
75 ±1 M4
21
M4
M4
EC-SYSTEMS
22
max. Ø115,3
max. Ø220,9
min. Ø160,7
Ø133 ±0,3
Ø155
Ø252
Ø92
4x90˚
8
Ø5
Accessories
Ø 1 90
Ø
25
45˚
8 0 min. 44 2
+2
0
85 45 max. 64
Technology
Core-end sleeves
Contacts
283
Inlet nozzle Electr. connection
p. 550 p. 603
EC centrifugal fan
backward curved, Ø 220
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw(1)
input(1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 603
R3G 220 M3G 074-CF A 1~ 200-277 50/60 3560 170 1.20 -25 to +60 J1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
[in H O]
A
2
A 14 1595 24 0.20 54 49
11
200 6 A 15 1595 26 0.20 48 52
A 16 1605 24 0.20 51 45
16 10
100 15
14
13 9 5 1
0 200 400 600 [CFM]
284
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Tach output
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE
– Approvals: UL, CSA; CCC, GOST are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
EC centrifugal,
107,5 ±1,5 Depth of screw 8-10 mm
forward
104,5 ±1,5
75 ±1 M4
21
M4
M4
EC-SYSTEMS
22
max. Ø115,3
max. Ø220,9
min. Ø160,7
Ø133 ±0,3
Ø155
Ø252
Ø92
4x90˚
8
Ø5
Accessories
Ø 1 90
Ø
25
45˚
8 0 min. 44 2
+2
0
85 45 max. 64
Technology
Core-end sleeves
Contacts
285
Inlet nozzle Electr. connection
p. 550 p. 603
EC centrifugal fan
backward curved, Ø 225
Electr. connection
Nominal voltage
Max. current
Max. power
Speed/rpm
Frequency
draw(1)
input(1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 601
R3G 225 M3G 055-CF A 1~ 230 50/60 2500 95 0.75 -25 to +60 H1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
A 1 2500 80 0.60 69 —
[Pa]
[in H O]
2
A
A 2 2380 88 0.65 62 60
A 3 2290 94 0.70 57 61
2,0
A 8 2140 60 0.45 60 45
4
A 9 1830 34 0.25 62 —
300 A 10 1790 38 0.30 57 60
8
3 A 11 1750 41 0.30 51 61
1,0
A 12 1810 36 0.30 54 44
7
200 12 A 13 1350 16 0.15 56 —
A 14 1320 17 0.15 50 50
11
2 A 15 1290 19 0.15 45 53
0,5
14
13 9 5 1
0 200 400 600 [CFM]
286
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Locked-rotor protection
backward
• Output 10 VDC max. 1.1 mA
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, CE
– Approvals: UL, CSA, CCC, GOST are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
Depth of screw
max. 6 mm
EC centrifugal,
85±1 M4
forward
26 99±1 28 M4
25
EC-SYSTEMS
max. Ø225,3
min. Ø153
max. Ø95
Ø58±0,15
Ø146
Ø223
Ø115
Ø72
450+20
Accessories
85
63 105±0,2
6
89 2
287
Inlet nozzle Electr. connection
p. 550 p. 601
EC centrifugal fan
backward curved, Ø 225
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw(1)
input(1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 603
R3G 225 M3G 074-CF A 1~ 100-130 50/60 2850 160 2.20 -25 to +60 J1)
subject to alterations (1) Nominal data in operating point with maximum load and 115 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
[in H O]
2
A
A 2 2800 149 1.90 67 50
A 3 2760 155 2.00 62 59
600
A 4 2845 136 1.70 66 45
A 5 2460 84 1.10 67 —
2,0
8 3 A 10 1990 58 0.80 61 46
A 11 1980 60 0.80 54 56
300
7
A 12 2010 52 0.70 57 42
1,0
12 A 13 1350 20 0.30 56 —
200 A 14 1340 21 0.30 52 37
11
2 A 15 1340 23 0.40 44 45
1350 21 0.30 35 32
0,5
6 A 16
100 16
15 10
14
13 9 5 1
0 200 400 600 [CFM]
288
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Tach output
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE
– Approvals: UL, CSA, CCC, GOST are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
EC centrifugal,
136,5±1,5 Depth of screw 8-10 mm
forward
133,5±1,5
104±1 28 M4
M4
M4
25
EC-SYSTEMS
max. Ø115,3
max. Ø225,3
min. Ø153
Ø133±0,3
4x90˚
Ø146
Ø223
Ø92
8
Ø5
Accessories
0
Ø9
25
8
Ø1
0 45˚
+2
50 min. 62
85 4 2
max. 89,4
Technology
Core-end sleeves
Contacts
289
Inlet nozzle Electr. connection
p. 550 p. 603
EC centrifugal fan
backward curved, Ø 225
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw(1)
input(1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 603
R3G 225 M3G 074-CF A 1~ 200-277 50/60 3010 165 1.20 -25 to +60 J1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
[in H O]
A
2
A 14 1530 29 0.20 53 43
11
200 A 15 1520 31 0.30 47 55
2
16
A 16 1530 28 0.20 50 42
6
15
100 10
14
13 9 5 1
0 200 400 600 [CFM]
290
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Tach output
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE
– Approvals: UL, CSA; CCC, GOST are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
EC centrifugal,
136,5±1,5 Depth of screw 8-10 mm
forward
133,5±1,5
104±1 28 M4
M4
M4
25
EC-SYSTEMS
max. Ø115,3
max. Ø225,3
min. Ø153
Ø133±0,3
4x90˚
Ø146
Ø223
Ø92
8
Ø5
Accessories
0
Ø9
25
8
Ø1
0 45˚
+2
50 min. 62
85 4 2
max. 89,4
Technology
Core-end sleeves
Contacts
291
Inlet nozzle Electr. connection
p. 550 p. 603
EC centrifugal fan
backward curved, Ø 250
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw(1)
input(1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 603
R3G 250 M3G 074-CF A 1~ 100-130 50/60 2630 145 1.90 -25 to +60 J1)
subject to alterations (1) Nominal data in operating point with maximum load and 115 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
2,5 [in H O]
2
A
A 2 2540 127 1.60 66 57
A 3 2480 140 1.80 61 60
600
A 4 2560 125 1.60 67 47
A 5 2315 72 1.00 68 —
2,0
8
3
A 10 1870 55 0.80 60 51
300
A 11 1835 60 0.90 53 58
7
A 12 1860 53 0.80 58 43
1,0
12
A 13 1290 18 0.30 58 —
200 A 14 1275 21 0.40 52 40
11
A 15 1250 22 0.40 44 49
2
1270 19 0.30
0,5
16
A 16 48 37
6
100
15
10
14
13 9 5 1
0 200 400 600 [CFM]
292
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Tach output
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE
– Approvals: UL, CSA, CCC, GOST are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
EC centrifugal,
125±1,5 Depth of screw 8-10 mm
forward
122±1,5
M4
92,5±1 31
M4
M4
EC-SYSTEMS
28
max. Ø115,3
max. Ø250,2
min. Ø172
Ø133±0,3
Ø164,5
4x90˚
Ø255
Ø92
Accessories
8
Ø5
8
Ø9
25
0
+2 45˚
Ø1
Core-end sleeves
Contacts
293
Inlet nozzle Electr. connection
p. 550 f. p. 603
EC centrifugal fan
backward curved, Ø 250
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw(1)
input(1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 603
R3G 250 M3G 074-CF A 1~ 200-277 50/60 2760 160 1.20 -25 to +60 J1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
[in H O]
A
2
500 4
A 8 2400 105 0.80 65 42
A 9 2000 53 0.40 65 —
400 8 A 10 1960 62 0.50 60 54
3
A 11 1940 69 0.50 55 58
300 7
A 12 1965 61 0.50 59 42
12 A 13 1380 22 0.20 58 —
1,0
11
A 14 1360 25 0.20 52 50
200
2
A 15 1350 28 0.25 47 57
16 6 A 16 1360 25 0.20 50 43
100 15 10
14
13 9 5 1
0 200 400 600 [CFM]
294
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Tach output
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE
– Approvals: UL, CSA; CCC, GOST are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
EC centrifugal,
125±1,5 Depth of screw 8-10 mm
forward
122±1,5
M4
92,5±1 31
M4
M4
EC-SYSTEMS
28
max. Ø115,3
max. Ø250,2
min. Ø172
Ø133±0,3
Ø164,5
4x90˚
Ø255
Ø92
Accessories
8
Ø5
8
Ø9
25
0
+2 45˚
Ø1
Core-end sleeves
Contacts
295
Inlet nozzle Electr. connection
p. 550 f. p. 603
EC centrifugal fan
backward curved, Ø 250
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw(1)
input(1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 603
R3G 250 M3G 074-CF A 1~ 100-130 50/60 2490 125 1.80 -25 to +60 J1)
subject to alterations (1) Nominal data in operating point with maximum load and 115 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
A 1 2490 97 1.30 72 —
[Pa]
[in H O]
2
A
A 2 2380 119 1.60 66 62
A 3 2330 123 1.60 60 64
2,0
A 8 2070 71 1.00 64 45
3 A 9 1700 35 0.50 66 —
8
300 A 10 1660 44 0.60 58 56
A 11 1650 47 0.70 52 59
1,0
7 A 12 1670 39 0.60 58 43
200 12 A 13 1040 11 0.20 57 —
11 2
A 14 1030 14 0.20 50 40
A 15 1030 15 0.20 41 46
0,5
6
100 A 16 1040 13 0.20 44 31
16 10
15
14
13 9 5 1
0 200 400 600 [CFM]
296
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Tach output
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE
– Approvals: UL, CSA, CCC, GOST are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
EC centrifugal,
125±1,5 Depth of screw 8-10 mm
forward
122±1,5
92,5±1 M4
31
M4
M4
EC-SYSTEMS
28
max. Ø115,3
max. Ø252,5
min. Ø172
Ø133±0,3
Ø164,5
Ø255
4x90˚
Ø92
Accessories
8
Ø5
0
Ø9
0
+2
25
0
45
Ø1
45˚
8
85 min. 44,7 2
max. 74,2
Core-end sleeves
Technology
Contacts
297
Inlet nozzle Electr. connection
p. 550 f. p. 603
EC centrifugal fan
backward curved, Ø 250
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw(1)
input(1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 603
R3G 250 M3G 074-CF A 1~ 200-277 50/60 2800 175 1.30 -25 to +60 J1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
[in H O]
A
2
500
A 8 2510 123 0.90 69 44
8
A 9 2080 62 0.50 67 —
400 3 A 10 2025 74 0.60 62 54
A 11 2020 78 0.60 56 60
7
300 12
A 12 2050 70 0.60 62 43
A 13 1370 24 0.20 59 —
1,0
11 A 14 1340 27 0.20 53 51
200 2
A 15 1330 28 0.20 46 57
6
16 A 16 1340 25 0.20 51 44
100 15 10
14
13 9 5 1
0 200 400 600 800 [CFM]
298
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Tach output
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE
– Approvals: UL, CSA; CCC, GOST are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
EC centrifugal,
125±1,5 Depth of screw 8-10 mm
forward
122±1,5
92,5±1 M4
31
M4
M4
EC-SYSTEMS
28
max. Ø115,3
max. Ø252,5
min. Ø172
Ø133±0,3
Ø164,5
Ø255
4x90˚
Ø92
Accessories
8
Ø5
0
Ø9
0
+2
25
0
45
Ø1
45˚
8
85 min. 44,7 2
max. 74,2
Core-end sleeves
Technology
Contacts
299
Inlet nozzle Electr. connection
p. 550 f. p. 603
EC centrifugal fan
backward curved, Ø 250
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 603
R3G 250 M3G 074-CF A 1~ 100-130 50/60 2570 170 2.20 -25 to +60 J1)
subject to alterations (1) Nominal data in operating point with maximum load and 115 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
[in H O]
2
A
A 2 2440 167 2.10 66 62
A 3 2420 166 2.10 62 63
2,0
8 A 8 2220 93 1.20 65 45
A 9 1820 59 0.80 69 —
300 A 10 1730 67 0.90 60 54
7
A 11 1720 66 0.90 54 55
1,0
12
A 12 1810 59 0.80 60 39
2
200 11 A 13 1220 23 0.30 62 —
A 14 1180 27 0.40 52 43
6
A 15 1180 25 0.40 44 46
0,5
100
16 10 A 16 1210 23 0.30 48 30
15
14
13 9 5 1
0 200 400 600 800 [CFM]
300
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Tach output
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE
– Approvals: UL, CSA, CCC, GOST are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
EC centrifugal,
131,5±1,5 Depth of screw 8-10 mm
forward
128,5±1,5
99±1 M4
31
M4
M4
EC-SYSTEMS
28
max. Ø115,3
max. Ø252,5
min. Ø172
Ø133±0,3
Ø164,5
Ø255
4x90˚
Ø92
Accessories
8
Ø5
0
Ø9
0
+2
25
0
45
Ø1
45˚
8
85 min. 56 2
max. 85,2
Core-end sleeves
Technology
Contacts
301
Inlet nozzle Electr. connection
p. 550 f. p. 603
EC centrifugal fan
backward curved, Ø 250
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 603
R3G 250 M3G 074-CF A 1~ 200-277 50/60 2510 178 1.40 -25 to +60 J1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
[in H O]
A
2
12 A 12 1765 59 0.50 59 39
2
200 A 13 1230 26 0.20 59 —
11
A 14 1240 27 0.30 51 50
6
A 15 1220 29 0.30 45 56
16
100 15 10
A 16 1240 27 0.30 48 43
14
13 9 5 1
0 200 400 600 [CFM]
302
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Tach output
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE
– Approvals: UL, CSA; CCC, GOST are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
EC centrifugal,
131,5±1,5 Depth of screw 8-10 mm
forward
128,5±1,5
99±1 M4
31
M4
M4
EC-SYSTEMS
28
max. Ø115,3
max. Ø252,5
min. Ø172
Ø133±0,3
Ø164,5
Ø255
4x90˚
Ø92
Accessories
8
Ø5
0
Ø9
0
+2
25
0
45
Ø1
45˚
8
85 min. 56 2
max. 85,2
Core-end sleeves
Technology
Contacts
303
Inlet nozzle Electr. connection
p. 550 f. p. 603
EC centrifugal fan
backward curved, Ø 250
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 605
R3G 250 M3G 084-DF A 1~ 100-130 50/60 3240 350 4.20 -25 to +60 K1)
subject to alterations (1) Nominal data in operating point with maximum load and 115 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
[in H O]
A
2
800
3,0
600
2,0
400
2
1,0
200
1
0 250 500 750 1000 [CFM]
304
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Alarm relay
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 61800-5-1, CE
– Approvals: UL, CSA, CCC, GOST are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
EC centrifugal,
106,5 ±1,8
45°
forward
130 ±1
31
M6
47,7
28
Ø150 ±0,25
Ø164,5
4x90°
Ø252
Ø172
Ø102
Ø178
Ø100
Ø225
EC-SYSTEMS
85
0
+2
0 Ø164 ±0,35
8 60 min. 55,7 2
max. 85,2
Accessories
Core-end sleeves
Technology
Contacts
305
Inlet nozzle Electr. connection
p. 550 f. p. 605
EC centrifugal fan
backward curved, Ø 250
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 605
R3G 250 M3G 084-DF A 1~ 200-277 50/60 3580 485 3.00 -25 to +60 K1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
[in H O]
A
2
3 A 9 2000 80 0.50 68 —
600 A 10 2000 100 0.60 62 53
8
A 11 2000 106 0.70 59 58
2,0
A 12 2000 94 0.60 60 50
7
400 2
12
1,0
200 11
10
9 5 1
0 250 500 750 1000 [CFM]
306
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Alarm relay
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 61800-5-1, CE
– Approvals: UL, CSA; CCC, GOST are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
EC centrifugal,
106,5 ±1,8
45°
forward
130 ±1
31
M6
47,7
28
Ø150 ±0,25
Ø164,5
4x90°
Ø252
Ø172
Ø102
Ø178
Ø100
Ø225
EC-SYSTEMS
85
0
+2
0 Ø164 ±0,35
8 60 min. 55,7 2
max. 85,2
Accessories
Core-end sleeves
Technology
Contacts
307
Inlet nozzle Electr. connection
p. 550 f. p. 605
EC centrifugal fan
backward curved, Ø 280
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 603
R3G 280 M3G 074-CF A 1~ 100-130 50/60 1750 145 1.90 -25 to +60 J1)
subject to alterations (1) Nominal data in operating point with maximum load and 115 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
[in H O]
2
A
A 2 1710 123 1.60 63 51
350 A 3 1675 138 1.80 59 67
A 4 1720 119 1.50 60 53
1,25
300
A 5 1550 73 1.00 66 —
4 A 6 1530 89 1.20 61 49
A 7 1500 99 1.30 56 66
1,00
A 11 1230 58 0.80 51 62
7 A 12 1260 50 0.70 52 49
150 12
A 13 880 18 0.30 57 —
0,50
11 A 14 870 21 0.30 51 36
100
A 15 870 23 0.40 46 51
2
16 A 16 880 20 0.30 40 39
0,25
6
50 15
10
14
13 9 5 1
0 200 400 600 800 1000 [CFM]
308
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Tach output
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE
– Approvals: UL, CSA, CCC, GOST are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
EC centrifugal,
157,5±1,5 Depth of screw 8-10 mm
forward
154,5±1,5
125±1 M4
35
M4
M4
EC-SYSTEMS
31
max. Ø115,3
max. Ø281,5
min. Ø190,2
Ø133±0,3
Ø182,5
Ø280
4x90˚
Ø92
Accessories
8
Ø5
Ø1 0
Ø9
0
+2
25
0
8 45 45˚
85 min. 79,7 2
max. 112,5
Core-end sleeves
Technology
Contacts
309
Inlet nozzle Electr. connection
p. 550 f. p. 603
EC centrifugal fan
backward curved, Ø 280
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 603
R3G 280 M3G 074-CF A 1~ 200-277 50/60 2000 170 1.30 -25 to +60 J1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
[in H O]
A
2
A 10 1350 61 0.50 60 49
3
A 11 1340 72 0.60 53 60
200 A 12 1360 61 0.50 53 50
7
12
A 13 980 24 0.20 58 —
A 14 970 28 0.30 54 47
0,5
11
A 15 960 32 0.30 48 60
100 2
16 A 16 970 27 0.30 44 51
6
15
10
14
13 9 5 1
0 250 500 750 1000 [CFM]
310
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Tach output
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE
– Approvals: UL, CSA; CCC, GOST are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
EC centrifugal,
157,5±1,5 Depth of screw 8-10 mm
forward
154,5±1,5
125±1 M4
35
M4
M4
EC-SYSTEMS
31
max. Ø115,3
max. Ø281,5
min. Ø190,2
Ø133±0,3
Ø182,5
Ø280
4x90˚
Ø92
Accessories
8
Ø5
Ø1 0
Ø9
0
+2
25
0
8 45 45˚
85 min. 79,7 2
max. 112,5
Core-end sleeves
Technology
Contacts
311
Inlet nozzle Electr. connection
p. 550 f. p. 603
EC centrifugal fan
backward curved, Ø 280
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 605
R3G 280 M3G 084-DF A 1~ 100-130 50/60 2420 350 4.20 -25 to +60 K1)
subject to alterations (1) Nominal data in operating point with maximum load and 115 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
[in H O]
A
2
600
2,0
400 3
1,5
1,0
200 2
0,5
1
0 250 500 750 1000 1250 1500 [CFM]
312
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Alarm relay
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 61800-5-1, CE
– Approvals: UL, CSA
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
EC centrifugal,
130 ±1 45°
35
forward
47,7 M6
31
Ø150 ±0,25
Ø182,5
4x90°
Ø281
Ø191
Ø102
Ø178
Ø100
Ø280
EC-SYSTEMS
85
0
+2
8 0
60 min. 79,7 Ø164 ±0,35
2
max. 112,5
Accessories
Core-end sleeves
Technology
Contacts
313
Inlet nozzle Electr. connection
p. 550 f. p. 605
EC centrifugal fan
backward curved, Ø 280
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 605
R3G 280 M3G 084-DF A 1~ 200-277 50/60 2600 455 2.80 -25 to +40 K1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
[in H O]
A
2
A 9 1460 65 0.40 67 —
3
A 10 1460 80 0.50 64 48
400 A 11 1460 88 0.60 58 60
1,5
8
A 12 1460 70 0.50 57 45
7
1,0
2
200 12
11 6
0,5
10
9 5 1
0 250 500 750 1000 1250 1500 [CFM]
314
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Alarm relay
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 61800-5-1, CE
– Approvals: VDE, UL, CSA; CCC, GOST are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
EC centrifugal,
130 ±1 45°
35
forward
47,7 M6
31
Ø150 ±0,25
Ø182,5
4x90°
Ø281
Ø191
Ø102
Ø178
Ø100
Ø280
EC-SYSTEMS
85
0
+2
8 0
60 min. 79,7 Ø164 ±0,35
2
max. 112,5
Accessories
Core-end sleeves
Technology
Contacts
315
Inlet nozzle Electr. connection
p. 550 f. p. 605
EC centrifugal fan
backward curved, 3-D, Ø 310
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 603
R3G 310 M3G 074-CF A 1~ 100-130 50/60 1700 160 2.10 -25 to +60 J1)
subject to alterations (1) Nominal data in operating point with maximum load and 115 VAC
n P1 I LpA tL
Curves (established with long inlet nozzle) [rpm] [W] [A] [dB(A)] [%]
[in H O]
2
A
A 2 1640 133 1.70 62 64
A 3 1600 152 1.90 58 75
A 4 1630 140 1.80 60 55
400
A 5 1530 80 1.10 62 —
1,5
A 6 1480 98 1.30 60 63
4 A 7 1450 110 1.50 55 75
300 A 8 1470 103 1.40 58 58
8
A 9 1270 50 0.70 58 —
1,0
A 10 1240 61 0.80 55 57
3
A 11 1220 68 0.90 52 73
200 A 12 1230 64 0.90 53 54
12 7
A 13 920 22 0.40 49 —
11
A 14 900 26 0.40 46 49
0,5
A 15 890 30 0.50 43 64
100 16 2
A 16 900 28 0.40 45 48
6
15
10
14
13 9 5 1
0 250 500 750 1000 [CFM]
316
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Tach output
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE
– Approvals: UL, CSA, CCC, GOST are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
EC centrifugal,
Inlet nozzle (long) Depth of screw 8-10 mm
152,5±1,5
forward
149,5±1,5
M4
120±1 48
M4
M4
18
EC-SYSTEMS
55,5
35
max. Ø115,3
max. Ø318,5
min. Ø220
Ø133±0,3
Ø208,1
4x90˚
Ø211
Ø300
Ø92
Accessories
8
Ø5
0
0 +2
Ø1 0
60
Ø9
8
25
85 45˚
min. 69,5 2
Core-end sleeves max. 110,5
Technology
Contacts
317
Inlet nozzle Guard grille Electr. connection
p. 550 f. p. 553 p. 603
EC centrifugal fan
backward curved, 3-D, Ø 310
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 603
R3G 310 M3G 074-CF A 1~ 200-277 50/60 1925 173 1.30 -25 to +60 J1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves (established with long inlet nozzle) [rpm] [W] [A] [dB(A)] [%]
[in H O]
A
2
8
A 9 1400 60 0.50 59 —
300 A 10 1360 76 0.60 57 60
3 A 11 1340 85 0.70 54 73
1,0
12 7 A 12 1355 81 0.70 56 54
200 A 13 1030 28 0.30 51 —
11 A 14 1010 35 0.30 49 59
A 15 990 40 0.30 45 72
0,5
16 2
100 6
A 16 1000 38 0.30 47 53
15
10
14
13 9 5 1
0 250 500 750 1000 1250 1500 [CFM]
318
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Tach output
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE
– Approvals: UL, CSA; CCC, GOST are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
EC centrifugal,
Inlet nozzle (long) Depth of screw 8-10 mm
152,5±1,5
forward
149,5±1,5
M4
120±1 48
M4
M4
18
EC-SYSTEMS
55,5
35
max. Ø115,3
max. Ø318,5
min. Ø220
Ø133±0,3
Ø208,1
4x90˚
Ø211
Ø300
Ø92
Accessories
8
Ø5
0
0 +2
Ø1 0
60
Ø9
8
25
85 45˚
min. 69,5 2
Core-end sleeves max. 110,5
Technology
Contacts
319
Inlet nozzle Guard grille Electr. connection
p. 550 f. p. 553 p. 603
EC centrifugal fan
backward curved, 3-D, Ø 310
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 603
R3G 310 M3G 074-CF A 1~ 200-277 50/60 1770 175 1.30 -25 to +60 J1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves (established with long inlet nozzle) [rpm] [W] [A] [dB(A)] [%]
[in H O]
A
2
A 8 1280 84 0.70 56 48
4
A 9 930 29 0.30 48 —
300 A 10 910 37 0.30 45 56
A 11 900 40 0.35 45 67
1,0
3
A 12 910 34 0.30 46 47
8
200
7
0,5
2
12
100
11 6
10
9 5 1
0 250 500 750 1000 1250 1500 [CFM]
320
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Tach output
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE
– Approvals: UL, CSA; CCC, GOST are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
EC centrifugal,
Inlet nozzle (long) Depth of screw 8-10 mm
186,5±1,5
forward
183,5±1,5
M4
154±1 48
M4
M4
18
EC-SYSTEMS
55,5
35
max. Ø115,3
max. Ø318,5
min. Ø220
Ø133±0,3
Ø208,1
4x90˚
Ø211
Ø300
Ø92
Accessories
8
Ø5
0
0 +2
Ø1 0
60
Ø9
8
25
85 45˚
min.100,5 2
Core-end sleeves max. 140
Technology
Contacts
321
Inlet nozzle Guard grille Electr. connection
p. 550 f. p. 553 p. 603
EC centrifugal fans and modules
backward curved, 3-D, Ø 310
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 605
*3G 310 M3G 084-DF A 1~ 100-130 50/60 2300 350 4.20 -25 to +60 K1)
subject to alterations (1) Nominal data in operating point with maximum load and 115 VAC
n P1 I LpA tL
Curves (established with long inlet nozzle) [rpm] [W] [A] [dB(A)] [%]
[in H O]
2
A
A 2 2190 338 4.10 69 64
1000
A 3 2180 350 4.20 71 67
A 4 2260 307 3.70 70 52
3,5
800
3,0
2,5
4
600
2,0
400
1,5
2
1,0
200
0,5
1
0 500 1000 1500 [CFM]
322
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Alarm relay
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 61800-5-1, CE
– Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal
EC centrifugal,
centrifugal fan
backward
Mass of
bracket
plate
Centrifugal fan kg Inlet nozzle Inlet nozzle Centrifugal module kg Centrifugal module kg
(long) (short) w. support bracket with support plate
47,7 M6
18
EC centrifugal,
55,5
35
forward
Ø150 ±0,25
Ø208,1
4x90°
Ø318
Ø220
Ø102
Ø178
Ø100
Ø211
Ø300
85
0
+2
8 0
60
EC-SYSTEMS
min. 69,5 Ø164 ±0,35
2
max. 110,5
Core-end sleeves
Accessories
WA
WA
RN
AT
Technology
RN
AT
ING
TE
ING
TE
NT
!
NT
Dan acito
!
ION
Cap
Dan acito
gero r disc
ION
Cap
!
gero r disc
Tem
Tens de
us harg ereu
! Tem
Tens de
ps
volta
us harg ereu
ions dech
ps
volta
ions dech
ges! time
dang arge
ges! time
dang arge
e
e
ses! cond
5
des
min!
ses! cond
5
des
min!
ensa
ensa
teur
teur
s5
s
minu
5
minu
tes!
tes!
6,4±0,2
6,4±0,2
8 8
85 85
1000±50 420±0,5 1000±50 420±0,5
Contacts
323
Inlet nozzle Guard grille Electr. connection
p. 550 f. p. 553 p. 605
EC centrifugal fans and modules
backward curved, 3-D, Ø 310
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 605
*3G 310 M3G 084-DF A 1~ 200-277 50/60 2590 505 3.10 -25 to +60 K1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves (established with long inlet nozzle) [rpm] [W] [A] [dB(A)] [%]
[in H O]
A
2
7
A 11 1810 198 1.20 64 67
A 12 1810 180 1.10 64 52
400 12
1,5
A 13 1110 42 0.30 55 —
2
11 A 14 1110 54 0.40 52 63
6
1,0
A 15 1110 57 0.40 52 67
200 A 16 1110 54 0.40 52 52
16 10
0,5
15
14
13 9 5 1
0 500 1000 1500 [CFM]
324
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Alarm relay
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 61800-5-1, CE
– Approvals: UL, CSA; VDE, CCC, GOST are applied for
Mass of centrifugal
EC centrifugal,
centrifugal fan
backward
Mass of
bracket
plate
Centrifugal fan kg Inlet nozzle Inlet nozzle Centrifugal module kg Centrifugal module kg
(long) (short) w. support bracket with support plate
47,7 M6
18
EC centrifugal,
55,5
35
forward
Ø150 ±0,25
Ø208,1
4x90°
Ø318
Ø220
Ø102
Ø178
Ø100
Ø211
Ø300
85
0
+2
8 0
60
EC-SYSTEMS
min. 69,5 Ø164 ±0,35
2
max. 110,5
Core-end sleeves
Accessories
WA
WA
RN
AT
Technology
RN
AT
ING
TE
ING
TE
NT
!
NT
Dan acito
!
ION
Cap
Dan acito
gero r disc
ION
Cap
!
gero r disc
Tem
Tens de
us harg ereu
! Tem
Tens de
ps
volta
us harg ereu
ions dech
ps
volta
ions dech
ges! time
dang arge
ges! time
dang arge
e
e
ses! cond
5
des
min!
ses! cond
5
des
min!
ensa
ensa
teur
teur
s5
s
minu
5
minu
tes!
tes!
6,4±0,2
6,4±0,2
8 8
85 85
1000±50 420±0,5 1000±50 420±0,5
Contacts
325
Inlet nozzle Guard grille Electr. connection
p. 550 f. p. 553 p. 605
EC centrifugal fans and modules
backward curved, 3-D, Ø 310
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 605
*3G 310 M3G 084-DF A 1~ 100-130 50/60 2080 350 4.20 -25 to +60 K1)
subject to alterations (1) Nominal data in operating point with maximum load and 115 VAC
n P1 I LpA tL
Curves (established with long inlet nozzle) [rpm] [W] [A] [dB(A)] [%]
[in H O]
A
2
600
4
2,0
500
400
1,5
300
1,0
200
0,5
100
1
0 500 1000 1500 [CFM]
326
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Alarm relay
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 61800-5-1, CE
– Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal
EC centrifugal,
centrifugal fan
backward
Mass of
bracket
plate
Centrifugal fan kg Inlet nozzle Inlet nozzle Centrifugal module kg Centrifugal module kg
(long) (short) w. support bracket with support plate
47,7 M6
18
EC centrifugal,
55,5
35
forward
Ø150 ±0,25
Ø208,1
4x90°
Ø318
Ø220
Ø102
Ø178
Ø100
Ø211
Ø300
85
0
+2
8 0
60
EC-SYSTEMS
min. 100,5 Ø164 ±0,35
2
max. 140,5
Core-end sleeves
Accessories
WA
WA
RN
AT
Technology
RN
AT
ING
TE
ING
TE
NT
!
NT
Dan acito
!
ION
Cap
Dan acito
gero r disc
ION
Cap
!
gero r disc
Tem
Tens de
us harg ereu
! Tem
Tens de
ps
volta
us harg ereu
ions dech
ps
volta
ions dech
ges! time
dang arge
ges! time
dang arge
e
e
ses! cond
5
des
min!
ses! cond
5
des
min!
ensa
ensa
teur
teur
s5
s
minu
5
minu
tes!
tes!
6,4±0,2
6,4±0,2
8 8
85 85
1000±50 420±0,5 1000±50 420±0,5
Contacts
327
Inlet nozzle Guard grille Electr. connection
p. 550 f. p. 553 p. 605
EC centrifugal fans and modules
backward curved, 3-D, Ø 310
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 605
*3G 310 M3G 084-DF A 1~ 200-277 50/60 2300 480 3.10 -25 to +60 K1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves (established with long inlet nozzle) [rpm] [W] [A] [dB(A)] [%]
[in H O]
2
A
A 2 2215 445 2.85 71 62
800 A 3 2170 480 3.10 68 67
A 4 2220 448 2.85 70 56
2,8
200 6
A 15 1200 80 0.50 53 67
16 A 16 1200 70 0.50 53 56
15 10
0,4
100
14
13 9 5 1
0 500 1000 1500 [CFM]
328
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Alarm relay
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 61800-5-1, CE
– Approvals: UL, CSA; VDE, CCC, GOST are applied for
Mass of centrifugal
EC centrifugal,
centrifugal fan
backward
Mass of
bracket
plate
Centrifugal fan kg Inlet nozzle Inlet nozzle Centrifugal module kg Centrifugal module kg
(long) (short) w. support bracket with support plate
47,7 M6
18
EC centrifugal,
55,5
35
forward
Ø150 ±0,25
Ø208,1
4x90°
Ø318
Ø220
Ø102
Ø178
Ø100
Ø211
Ø300
85
0
+2
8 0
60
EC-SYSTEMS
min. 100,5 Ø164 ±0,35
2
max. 140,5
Core-end sleeves
Accessories
WA
WA
RN
AT
Technology
RN
AT
ING
TE
ING
TE
NT
!
NT
Dan acito
!
ION
Cap
Dan acito
gero r disc
ION
Cap
!
gero r disc
Tem
Tens de
us harg ereu
! Tem
Tens de
ps
volta
us harg ereu
ions dech
ps
volta
ions dech
ges! time
dang arge
ges! time
dang arge
e
e
ses! cond
5
des
min!
ses! cond
5
des
min!
ensa
ensa
teur
teur
s5
s
minu
5
minu
tes!
tes!
6,4±0,2
6,4±0,2
8 8
85 85
1000±50 420±0,5 1000±50 420±0,5
Contacts
329
Inlet nozzle Guard grille Electr. connection
p. 550 f. p. 553 p. 605
EC centrifugal fans and modules
backward curved, 3-D, Ø 355
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 605
*3G 355 M3G 084-FA A 1~ 100-130 50/60 1730 355 4.10 -25 to +60 K1)
subject to alterations (1) Nominal data in operating point with maximum load and 115 VAC
n P1 I LpA tL
Curves (established with long inlet nozzle) [rpm] [W] [A] [dB(A)] [%]
[in H O]
A
2
600
2,0
500
4
400
1,5
300
1,0
200 2
0,5
100
1
0 500 1000 1500 2000 [CFM]
330
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Alarm relay
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 61800-5-1, CE
– Approvals: UL, CSA; VDE, CCC, GOST are applied for
Mass of centrifugal
EC centrifugal,
centrifugal fan
backward
Mass of
bracket
plate
Centrifugal fan kg Inlet nozzle Inlet nozzle Centrifugal module kg Centrifugal module kg
(long) (short) w. support bracket with support plate
145 ±1
47,7 22 M6
EC centrifugal,
,5
44
70
forward
Ø150 ±0,25
Ø236,4
4x90°
Ø360
Ø250
Ø102
Ø178
Ø100
Ø240
Ø350
85
0
+2 Ø164 ±0,35
EC-SYSTEMS
8 0
60
min. 95,5 2
max. 148
Core-end sleeves
Accessories
WA
WA
RN
AT
Technology
RN
AT
ING
TE
ING
TE
NT
!
NT
Dan acito
!
ION
Cap
Dan acito
gero r disc
ION
Cap
!
gero r disc
Tem
Tens de
us harg ereu
! Tem
Tens de
ps
volta
us harg ereu
ions dech
ps
volta
ions dech
ges! time
dang arge
ges! time
dang arge
e
e
ses! cond
5
des
min!
ses! cond
5
des
min!
ensa
ensa
teur
teur
s5
s
minu
5
minu
tes!
tes!
6,4±0,2
6,4±0,2
8 8
85 85
1000±50 476±0,5 1000±50 476±0,5
Contacts
331
Inlet nozzle Electr. connection
p. 550 f. p. 605
EC centrifugal fans and modules
backward curved, 3-D, Ø 355
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 605
*3G 355 M3G 084-FA A 1~ 200-277 50/60 1970 500 3.15 -25 to +60 K1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves (established with long inlet nozzle) [rpm] [W] [A] [dB(A)] [%]
[in H O]
A
2
100 15 10
14
13 9 5 1
0 500 1000 1500 2000 [CFM]
332
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Alarm relay
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 61800-5-1, CE
– Approvals: UL, CSA; VDE, CCC, GOST are applied for
Mass of centrifugal
EC centrifugal,
centrifugal fan
backward
Mass of
bracket
plate
Centrifugal fan kg Inlet nozzle Inlet nozzle Centrifugal module kg Centrifugal module kg
(long) (short) w. support bracket with support plate
145 ±1
47,7 22 M6
EC centrifugal,
,5
44
70
forward
Ø150 ±0,25
Ø236,4
4x90°
Ø360
Ø250
Ø102
Ø178
Ø100
Ø240
Ø350
85
0
+2 Ø164 ±0,35
EC-SYSTEMS
8 0
60
min. 95,5 2
max. 148
Core-end sleeves
Accessories
WA
WA
RN
AT
Technology
RN
AT
ING
TE
ING
TE
NT
!
NT
Dan acito
!
ION
Cap
Dan acito
gero r disc
ION
Cap
!
gero r disc
Tem
Tens de
us harg ereu
! Tem
Tens de
ps
volta
us harg ereu
ions dech
ps
volta
ions dech
ges! time
dang arge
ges! time
dang arge
e
e
ses! cond
5
des
min!
ses! cond
5
des
min!
ensa
ensa
teur
teur
s5
s
minu
5
minu
tes!
tes!
6,4±0,2
6,4±0,2
8 8
85 85
1000±50 476±0,5 1000±50 476±0,5
Contacts
333
Inlet nozzle Electr. connection
p. 550 f. p. 605
EC centrifugal fans and modules
backward curved, 3-D, Ø 355
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 605
*3G 355 M3G 084-FA A 1~ 100-130 50/60 1630 350 4.20 -25 to +60 K1)
subject to alterations (1) Nominal data in operating point with maximum load and 115 VAC
n P1 I LpA tL
Curves (established with long inlet nozzle) [rpm] [W] [A] [dB(A)] [%]
[in H O]
A
2
600
2,0
500
4
400
1,5
300 3
1,0
200
2
0,5
100
1
0 500 1000 1500 2000 [CFM]
334
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Alarm relay
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 61800-5-1, CE
– Approvals: UL, CSA, VDE, CCC, GOST are applied for
Mass of centrifugal
EC centrifugal,
centrifugal fan
backward
Mass of
bracket
plate
Centrifugal fan kg Inlet nozzle Inlet nozzle Centrifugal module kg Centrifugal module kg
(long) (short) w. support bracket with support plate
145 ±1
47,7 22 M6
EC centrifugal,
,5
44
70
forward
Ø150 ±0,25
Ø236,4
4x90°
Ø360
Ø250
Ø102
Ø178
Ø100
Ø240
Ø350
85
0
+2 Ø164 ±0,35
EC-SYSTEMS
8 0
60
min. 120 2
max. 172,5
Core-end sleeves
Accessories
WA
WA
RN
AT
Technology
RN
AT
ING
TE
ING
TE
NT
!
NT
Dan acito
!
ION
Cap
Dan acito
gero r disc
ION
Cap
!
gero r disc
Tem
Tens de
us harg ereu
! Tem
Tens de
ps
volta
us harg ereu
ions dech
ps
volta
ions dech
ges! time
dang arge
ges! time
dang arge
e
e
ses! cond
5
des
min!
ses! cond
5
des
min!
ensa
ensa
teur
teur
s5
s
minu
5
minu
tes!
tes!
6,4±0,2
6,4±0,2
8 8
85 85
1000±50 476±0,5 1000±50 476±0,5
Contacts
335
Inlet nozzle Electr. connection
p. 550 f. p. 605
EC centrifugal fans and modules
backward curved, 3-D, Ø 355
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 605
*3G 355 M3G 084-FA A 1~ 200-277 50/60 1770 450 2.90 -25 to +60 K1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves (established with long inlet nozzle) [rpm] [W] [A] [dB(A)] [%]
[in H O]
2
A
A 2 1720 434 2.75 68 58
700 A 3 1710 450 2.90 64 68
A 4 1745 412 2.60 67 57
2,5
500
A 8 1620 335 2.00 65 57
8 A 9 1400 182 1.10 67 —
400 3 A 10 1400 235 1.40 64 58
1,5
7
A 11 1400 247 1.50 59 68
12
300
A 12 1400 218 1.30 62 57
11 A 13 1200 120 0.80 62 —
1,0
16
2 A 14 1200 152 1.00 59 58
200
15 6
A 15 1200 160 1.00 56 68
10 A 16 1200 140 0.90 57 57
0,5
100 14
13 9 5 1
0 500 1000 1500 2000 [CFM]
336
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Alarm relay
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 61800-5-1, CE
– Approvals: UL, CSA; VDE, CCC, GOST are applied for
Mass of centrifugal
EC centrifugal,
centrifugal fan
backward
Mass of
bracket
plate
Centrifugal fan kg Inlet nozzle Inlet nozzle Centrifugal module kg Centrifugal module kg
(long) (short) w. support bracket with support plate
145 ±1
47,7 22 M6
EC centrifugal,
,5
44
70
forward
Ø150 ±0,25
Ø236,4
4x90°
Ø360
Ø250
Ø102
Ø178
Ø100
Ø240
Ø350
85
0
+2 Ø164 ±0,35
EC-SYSTEMS
8 0
60
min. 120 2
max. 172,5
Core-end sleeves
Accessories
WA
WA
RN
AT
Technology
RN
AT
ING
TE
ING
TE
NT
!
NT
Dan acito
!
ION
Cap
Dan acito
gero r disc
ION
Cap
!
gero r disc
Tem
Tens de
us harg ereu
! Tem
Tens de
ps
volta
us harg ereu
ions dech
ps
volta
ions dech
ges! time
dang arge
ges! time
dang arge
e
e
ses! cond
5
des
min!
ses! cond
5
des
min!
ensa
ensa
teur
teur
s5
s
minu
5
minu
tes!
tes!
6,4±0,2
6,4±0,2
8 8
85 85
1000±50 476±0,5 1000±50 476±0,5
Contacts
337
Inlet nozzle Electr. connection
p. 550 f. p. 605
EC centrifugal fans and modules
backward curved, 3-D, Ø 355
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A °C p. 607
*3G 355 M3G 112-EA A 1~ 200-277 50/60 2035 0.74 3.34 -25 to +60 L1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LwA tL
Curves (established with long inlet nozzle) [rpm] [kW] [A] [dB(A)] [%]
[in H O]
A
2
600
4 A 5 1585 0.28 1.30 76 —
A 6 1580 0.32 1.50 73 52
A 7 1580 0.34 1.60 71 71
2,0
500
A 8 1580 0.33 1.50 73 68
3
A 9 1150 0.12 0.60 67 —
400 8 A 10 1145 0.14 0.70 64 54
1,5
200 12
11 6
0,5
100 10
9 5 1
0 500 1000 1500 2000 2500 [CFM]
338
information
General
– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage detection
AC centrifugal,
• PFC (active) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation
backward
• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Electronics / motor overtemperature protection
• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked-rotor protection
• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start
– EMC: Interference emission acc. to EN 61000-6-4 (industrial environment)
Interference immunity acc. to EN 61000-6-2 (industrial environment)
Harmonics acc. to DIN EN 61000-3-2/3
AC centrifugal,
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
forward
– Connection leads: Via terminal strip
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal
EC centrifugal,
centrifugal fan
backward
Mass of
bracket
plate
Centrifugal fan kg Inlet nozzle Inlet nozzle Centrifugal module kg Centrifugal module kg
(long) (short) w. support bracket with support plate
EC centrifugal,
22
86±
,5
Ø1
70
forward
44
Ø168±0,5
Ø200±1
Ø360
Ø138
Ø250
Ø360
Ø243
Ø240
Ø350
EC-SYSTEMS
120,5 3
171 1,5 5xM6
Depth of screw 12-16 mm
Cable gland Accessories
2,5
60
3 x 100
Ø236,4
Ø236,4
Technology
8 x Ø11
8 x Ø11
4 x Ø9
450 15 450
Contacts
339
Inlet nozzle Electr. connection
p. 550 f. p. 607
EC centrifugal fans and modules
backward curved, 3-D, Ø 355
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A °C p. 607
*3G 355 M3G 112-EA A 3~ 200-240 50/60 2215 0.94 3.00 -25 to +60 L2)
subject to alterations (1) Nominal data in operating point with maximum load and 200 VAC
n P1 I LwA tL
Curves (established with long inlet nozzle) [rpm] [kW] [A] [dB(A)] [%]
[in H O]
A
2
3
A 9 1335 0.17 0.70 72 —
8
2,0
6
200 11
10
9 5 1
0 500 1000 1500 2000 2500 [CFM]
340
information
General
– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection
AC centrifugal,
• PFC (passive) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation
backward
• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Electronics / motor overtemperature protection
• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked-rotor protection
• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
AC centrifugal,
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
forward
– Connection leads: Via terminal strip
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal
EC centrifugal,
centrifugal fan
backward
Mass of
bracket
plate
Centrifugal fan kg Inlet nozzle Inlet nozzle Centrifugal module kg Centrifugal module kg
(long) (short) w. support bracket with support plate
EC centrifugal,
22
86±
,5
Ø1
70
forward
44
Ø168±0,5
Ø200±1
Ø360
Ø138
Ø250
Ø360
Ø243
Ø240
Ø350
EC-SYSTEMS
120,5 3
171 1,5 5xM6
Depth of screw 12-16 mm
Cable gland Accessories
2,5
60
3 x 100
Ø236,4
Ø236,4
Technology
8 x Ø11
8 x Ø11
4 x Ø9
450 15 450
Contacts
341
Inlet nozzle Electr. connection
p. 550 f. p. 607
EC centrifugal fans and modules
backward curved, 3-D, Ø 355
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A °C p. 607
*3G 355 M3G 112-EA A 3~ 380-480 50/60 2215 0.94 1.50 -25 to +60 L2)
subject to alterations (1) Nominal data in operating point with maximum load and 400 VAC
n P1 I LwA tL
Curves (established with long inlet nozzle) [rpm] [kW] [A] [dB(A)] [%]
[in H O]
A
2
3
A 9 1335 0.17 0.40 72 —
8
2,0
6
200 11
10
9 5 1
0 500 1000 1500 2000 2500 [CFM]
342
information
General
– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection
AC centrifugal,
• PFC (passive) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation
backward
• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Electronics / motor overtemperature protection
• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked-rotor protection
• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
AC centrifugal,
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
forward
– Connection leads: Via terminal strip
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal
EC centrifugal,
centrifugal fan
backward
Mass of
bracket
plate
Centrifugal fan kg Inlet nozzle Inlet nozzle Centrifugal module kg Centrifugal module kg
(long) (short) w. support bracket with support plate
EC centrifugal,
22
86±
,5
Ø1
70
forward
44
Ø168±0,5
Ø200±1
Ø360
Ø138
Ø250
Ø360
Ø243
Ø240
Ø350
EC-SYSTEMS
120,5 3
171 1,5 5xM6
Depth of screw 12-16 mm
Cable gland Accessories
2,5
60
3 x 100
Ø236,4
Ø236,4
Technology
8 x Ø11
8 x Ø11
4 x Ø9
450 15 450
Contacts
343
Inlet nozzle Electr. connection
p. 550 f. p. 607
EC centrifugal fans and modules
backward curved, 3-D, Ø 400
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 605
*3G 400 M3G 084-FA A 1~ 100-130 50/60 1460 350 4.20 -25 to +60 K1)
subject to alterations (1) Nominal data in operating point with maximum load and 115 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
[in H O]
A
2
700
2,4
600
2,0
500
4
1,6
400
3
1,2
300
0,8
200 2
0,4
100
1
0 500 1000 1500 2000 [CFM]
344
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Alarm relay
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 61800-5-1, CE
– Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal
EC centrifugal,
centrifugal fan
backward
Mass of
bracket
plate
Centrifugal fan kg Inlet nozzle Centrifugal module kg Centrifugal module kg
(long) w. support bracket with support plate
157±1,8 66
Depth of screw 8-10 mm
145 ±1 45°
47,7 22 M6
EC centrifugal,
50
90
forward
Ø150 ±0,25
4x90°
Ø102
Ø178
Ø100
Ø268
Ø404
Ø257
Ø370
85
0
+2
Ø164 ±0,35
EC-SYSTEMS
8 0
60
4
min. 89,4
Core-end sleeves max. 142
Accessories
WA
WA
RN
AT
Technology
RN
AT
ING
TE
ING
TE
NT
!
NT
Dan acito
!
ION
Cap
Dan acito
gero r disc
ION
Cap
!
gero r disc
Tem
Tens de
us harg ereu
! Tem
Tens de
ps
volta
us harg ereu
ions dech
ps
volta
ions dech
ges! time
dang arge
ges! time
dang arge
e
e
ses! cond
5
des
min!
ses! cond
5
des
min!
ensa
ensa
teur
teur
s5
s
minu
5
minu
tes!
tes!
6,4±0,2
6,4±0,2
8 8
85 85
1000±50 520±0,5 1000±50 520±0,5
Contacts
345
Inlet nozzle Guard grille Electr. connection
p. 550 f. p. 553 p. 605
EC centrifugal fans and modules
backward curved, 3-D, Ø 400
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 605
*3G 400 M3G 084-FA A 1~ 200-277 50/60 1460 360 2.20 -25 to +60 K1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
[in H O]
A
2
8
3 A 10 900 90 0.60 56 53
300 A 11 900 90 0.60 52 67
7 A 12 900 77 0.50 44 54
1,0
200
12 2
11 6
0,5
100
10
9 5 1
0 500 1000 1500 2000 [CFM]
346
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Alarm relay
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 61800-5-1, CE
– Approvals: UL, CSA, CCC; VDE, GOST are applied for
Mass of centrifugal
EC centrifugal,
centrifugal fan
backward
Mass of
bracket
plate
Centrifugal fan kg Inlet nozzle Centrifugal module kg Centrifugal module kg
(long) w. support bracket with support plate
157±1,8 66
Depth of screw 8-10 mm
145 ±1 45°
47,7 22 M6
EC centrifugal,
50
90
forward
Ø150 ±0,25
4x90°
Ø102
Ø178
Ø100
Ø268
Ø404
Ø257
Ø370
85
0
+2
Ø164 ±0,35
EC-SYSTEMS
8 0
60
4
min. 89,4
Core-end sleeves max. 142
Accessories
WA
WA
RN
AT
Technology
RN
AT
ING
TE
ING
TE
NT
!
NT
Dan acito
!
ION
Cap
Dan acito
gero r disc
ION
Cap
!
gero r disc
Tem
Tens de
us harg ereu
! Tem
Tens de
ps
volta
us harg ereu
ions dech
ps
volta
ions dech
ges! time
dang arge
ges! time
dang arge
e
e
ses! cond
5
des
min!
ses! cond
5
des
min!
ensa
ensa
teur
teur
s5
s
minu
5
minu
tes!
tes!
6,4±0,2
6,4±0,2
8 8
85 85
1000±50 520±0,5 1000±50 520±0,5
Contacts
347
Inlet nozzle Guard grille Electr. connection
p. 550 f. p. 553 p. 605
EC centrifugal fans and modules
backward curved, 3-D, Ø 400
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 605
*3G 400 M3G 084-FA A 1~ 100-130 50/60 1320 325 3.90 -25 to +60 K1)
subject to alterations (1) Nominal data in operating point with maximum load and 115 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
[in H O]
2
A
A 2 1275 317 3.80 66 60
A 3 1285 325 3.90 63 70
600
A 4 1320 285 3.50 66 57
2,0
500
400
1,5
300
3
1,0
200 2
0,5
100
1
0 500 1000 1500 2000 [CFM]
348
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Alarm relay
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 61800-5-1, CE
– Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal
EC centrifugal,
centrifugal fan
backward
Mass of
bracket
plate
Centrifugal fan kg Inlet nozzle Centrifugal module kg Centrifugal module kg
(long) w. support bracket with support plate
180±1,8 66
Depth of screw 8-10 mm
145 ±1 45°
47,7 22 M6
EC centrifugal,
50
90
forward
Ø150 ±0,25
4x90°
Ø102
Ø178
Ø100
Ø268
Ø404
Ø257
Ø370
85
0
+2
Ø164 ±0,35
EC-SYSTEMS
8 0
60
4
min.112,3
Core-end sleeves max. 165
Accessories
WA
WA
RN
AT
Technology
RN
AT
ING
TE
ING
TE
NT
!
NT
Dan acito
!
ION
Cap
Dan acito
gero r disc
ION
Cap
!
gero r disc
Tem
Tens de
us harg ereu
! Tem
Tens de
ps
volta
us harg ereu
ions dech
ps
volta
ions dech
ges! time
dang arge
ges! time
dang arge
e
e
ses! cond
5
des
min!
ses! cond
5
des
min!
ensa
ensa
teur
teur
s5
s
minu
5
minu
tes!
tes!
6,4±0,2
6,4±0,2
8 8
85 85
1000±50 520±0,5 1000±50 520±0,5
Contacts
349
Inlet nozzle Guard grille Electr. connection
p. 550 f. p. 553 p. 605
EC centrifugal fans and modules
backward curved, 3-D, Ø 400
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 605
*3G 400 M3G 084-FA A 1~ 200-277 50/60 1365 355 2.20 -25 to +60 K1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
[in H O]
2
A
A 2 1335 339 2.05 70 48
A 3 1320 355 2.20 65 64
2,0
8
A 12 790 65 0.40 53 54
200
7
12 2
0,5
100 11 6
10
9 5 1
0 500 1000 1500 2000 [CFM]
350
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Alarm relay
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 61800-5-1, CE
– Approvals: UL, CSA; VDE, CCC, GOST are applied for
Mass of centrifugal
EC centrifugal,
centrifugal fan
backward
Mass of
bracket
plate
Centrifugal fan kg Inlet nozzle Centrifugal module kg Centrifugal module kg
(long) w. support bracket with support plate
180±1,8 66
Depth of screw 8-10 mm
145 ±1 45°
47,7 22 M6
EC centrifugal,
50
90
forward
Ø150 ±0,25
4x90°
Ø102
Ø178
Ø100
Ø268
Ø404
Ø257
Ø370
85
0
+2
Ø164 ±0,35
EC-SYSTEMS
8 0
60
4
min.112,3
Core-end sleeves max. 165
Accessories
WA
WA
RN
AT
Technology
RN
AT
ING
TE
ING
TE
NT
!
NT
Dan acito
!
ION
Cap
Dan acito
gero r disc
ION
Cap
!
gero r disc
Tem
Tens de
us harg ereu
! Tem
Tens de
ps
volta
us harg ereu
ions dech
ps
volta
ions dech
ges! time
dang arge
ges! time
dang arge
e
e
ses! cond
5
des
min!
ses! cond
5
des
min!
ensa
ensa
teur
teur
s5
s
minu
5
minu
tes!
tes!
6,4±0,2
6,4±0,2
8 8
85 85
1000±50 520±0,5 1000±50 520±0,5
Contacts
351
Inlet nozzle Guard grille Electr. connection
p. 550 f. p. 553 p. 605
EC centrifugal fans and modules
backward curved, 3-D, Ø 400
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 605
*3G 400 M3G 084-FA A 1~ 100-130 50/60 1400 380 4.50 -25 to +40 K1)
subject to alterations (1) Nominal data in operating point with maximum load and 115 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
[in H O]
2
A
A 2 1360 381 4.50 68 59
A 3 1365 380 4.50 65 68
600
A 4 1420 317 3.80 69 55
2,0
500
400
1,5
3
300
1,0
2
200
0,5
100
1
0 500 1000 1500 2000 [CFM]
352
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Alarm relay
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 61800-5-1, CE
– Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal
EC centrifugal,
centrifugal fan
backward
Mass of
bracket
plate
Centrifugal fan kg Inlet nozzle Centrifugal module kg Centrifugal module kg
(long) w. support bracket with support plate
180±1,8 66
Depth of screw 8-10 mm
145 ±1 45°
47,7 22 M6
EC centrifugal,
50
90
forward
Ø150 ±0,25
4x90°
Ø102
Ø178
Ø100
Ø268
Ø404
Ø257
Ø370
85
0
+2
Ø164 ±0,35
EC-SYSTEMS
8 0
60
4
min.112,3
Core-end sleeves max. 165
Accessories
WA
WA
RN
AT
Technology
RN
AT
ING
TE
ING
TE
NT
!
NT
Dan acito
!
ION
Cap
Dan acito
gero r disc
ION
Cap
!
gero r disc
Tem
Tens de
us harg ereu
! Tem
Tens de
ps
volta
us harg ereu
ions dech
ps
volta
ions dech
ges! time
dang arge
ges! time
dang arge
e
e
ses! cond
5
des
min!
ses! cond
5
des
min!
ensa
ensa
teur
teur
s5
s
minu
5
minu
tes!
tes!
6,4±0,2
6,4±0,2
8 8
85 85
1000±50 520±0,5 1000±50 520±0,5
Contacts
353
Inlet nozzle Guard grille Electr. connection
p. 550 f. p. 553 p. 605
EC centrifugal fans and modules
backward curved, 3-D, Ø 400
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 605
*3G 400 M3G 084-FA A 1~ 200-277 50/60 1410 410 2.50 -25 to +40 K1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
[in H O]
2
A
A 2 1370 401 2.45 69 51
A 3 1375 410 2.50 66 64
600
A 4 1420 352 2.15 71 54
A 5 1110 161 1.00 68 —
2,0
3 A 10 800 80 0.50 56 51
300 A 11 800 78 0.50 52 64
8 A 12 800 55 0.40 53 54
1,0
7
200 2
12
0,5
6
11
100
10
9 5 1
0 500 1000 1500 2000 [CFM]
354
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Alarm relay
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 61800-5-1, CE
– Approvals: UL, CSA; VDE, CCC, GOST are applied for
Mass of centrifugal
EC centrifugal,
centrifugal fan
backward
Mass of
bracket
plate
Centrifugal fan kg Inlet nozzle Centrifugal module kg Centrifugal module kg
(long) w. support bracket with support plate
180±1,8 66
Depth of screw 8-10 mm
145 ±1 45°
47,7 22 M6
EC centrifugal,
50
90
forward
Ø150 ±0,25
4x90°
Ø102
Ø178
Ø100
Ø268
Ø404
Ø257
Ø370
85
0
+2
Ø164 ±0,35
EC-SYSTEMS
8 0
60
4
min.112,3
Core-end sleeves max. 165
Accessories
WA
WA
RN
AT
Technology
RN
AT
ING
TE
ING
TE
NT
!
NT
Dan acito
!
ION
Cap
Dan acito
gero r disc
ION
Cap
!
gero r disc
Tem
Tens de
us harg ereu
! Tem
Tens de
ps
volta
us harg ereu
ions dech
ps
volta
ions dech
ges! time
dang arge
ges! time
dang arge
e
e
ses! cond
5
des
min!
ses! cond
5
des
min!
ensa
ensa
teur
teur
s5
s
minu
5
minu
tes!
tes!
6,4±0,2
6,4±0,2
8 8
85 85
1000±50 520±0,5 1000±50 520±0,5
Contacts
355
Inlet nozzle Guard grille Electr. connection
p. 550 f. p. 553 p. 605
EC centrifugal fans and modules
backward curved, 3-D, Ø 400
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A °C p. 607
*3G 400 M3G 112-EA A 1~ 200-277 50/60 1720 0.76 3.40 -25 to +60 L1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LwA tL
Curves [rpm] [kW] [A] [dB(A)] [%]
[in H O]
2
A
A 2 1725 0.72 3.20 80 51
700 A 3 1720 0.76 3.40 75 62
A 4 1725 0.68 3.00 79 59
2,5
2
12
200
6
11
0,5
100 10
9 5 1
0 500 1000 1500 2000 2500 [CFM]
356
information
General
– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage detection
AC centrifugal,
• PFC (active) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation
backward
• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Electronics / motor overtemperature protection
• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked-rotor protection
• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start
– EMC: Interference emission acc. to EN 61000-6-4 (industrial environment)
Interference immunity acc. to EN 61000-6-2 (industrial environment)
Harmonics acc. to DIN EN 61000-3-2/3
AC centrifugal,
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
forward
– Connection leads: Via terminal strip
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal
EC centrifugal,
centrifugal fan
backward
Mass of
bracket
plate
Centrifugal fan kg Inlet nozzle Centrifugal module kg Centrifugal module kg
(long) w. support bracket with support plate
56,5±0,6 187,5±2
160,5±1
66
5x7
2˚
EC centrifugal,
0,5
86±
forward
22
Ø1
50
90
Ø168±0,5
Ø200±1
Ø404
Ø138
Ø268
Ø404
Ø260
Ø257
Ø370
EC-SYSTEMS
4
113 1,5 5xM6
164 Depth of screw 12-16 mm
Cable gland Accessories
2,5
60
3 x 100
Technology
Ø257
Ø257
8 x Ø11
8 x Ø11
4 x Ø9
450 15 450
Contacts
357
Inlet nozzle Guard grille Electr. connection
p. 550 f. p. 553 p. 607
EC centrifugal fans and modules
backward curved, 3-D, Ø 400
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A °C p. 607
*3G 400 M3G 112-EA A 3~ 200-240 50/60 1755 0.77 2.60 -25 to +60 L2)
subject to alterations (1) Nominal data in operating point with maximum load and 200 VAC
n P1 I LwA tL
Curves [rpm] [kW] [A] [dB(A)] [%]
[in H O]
2
A
A 2 1760 0.75 2.50 80 51
700 A 3 1760 0.77 2.60 75 62
A 4 1760 0.72 2.40 79 56
2,5
600
4 A 5 1510 0.40 1.60 80 —
A 6 1470 0.42 1.60 74 54
A 7 1465 0.43 1.60 72 69
2,0
200 6
11
0,5
10
100
9 5 1
0 500 1000 1500 2000 2500 [CFM]
358
information
General
– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection
AC centrifugal,
• PFC (passive) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation
backward
• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Electronics / motor overtemperature protection
• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked-rotor protection
• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
AC centrifugal,
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
forward
– Connection leads: Via terminal strip
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal
EC centrifugal,
centrifugal fan
backward
Mass of
bracket
plate
Centrifugal fan kg Inlet nozzle Centrifugal module kg Centrifugal module kg
(long) w. support bracket with support plate
56,5±0,6 187,5±2
160,5±1
66
5x7
2˚
EC centrifugal,
0,5
86±
forward
22
Ø1
50
90
Ø168±0,5
Ø200±1
Ø404
Ø138
Ø268
Ø404
Ø260
Ø257
Ø370
EC-SYSTEMS
4
113 1,5 5xM6
164 Depth of screw 12-16 mm
Cable gland Accessories
2,5
60
3 x 100
Technology
Ø257
Ø257
8 x Ø11
8 x Ø11
4 x Ø9
450 15 450
Contacts
359
Inlet nozzle Guard grille Electr. connection
p. 550 f. p. 553 p. 607
EC centrifugal fans and modules
backward curved, 3-D, Ø 400
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A °C p. 607
*3G 400 M3G 112-EA A 3~ 380-480 50/60 1755 0.77 1.30 -25 to +60 L2)
subject to alterations (1) Nominal data in operating point with maximum load and 400 VAC
n P1 I LwA tL
Curves [rpm] [kW] [A] [dB(A)] [%]
[in H O]
2
A
A 2 1760 0.75 1.30 80 51
700 A 3 1760 0.77 1.30 75 62
A 4 1760 0.72 1.20 79 56
2,5
600
4 A 5 1510 0.40 0.80 80 —
A 6 1470 0.42 0.80 74 54
A 7 1465 0.43 0.80 72 69
2,0
200 6
11
0,5
10
100
9 5 1
0 500 1000 1500 2000 2500 [CFM]
360
information
General
– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection
AC centrifugal,
• PFC (passive) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation
backward
• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Electronics / motor overtemperature protection
• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked-rotor protection
• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
AC centrifugal,
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
forward
– Connection leads: Via terminal strip
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal
EC centrifugal,
centrifugal fan
backward
Mass of
bracket
plate
Centrifugal fan kg Inlet nozzle Centrifugal module kg Centrifugal module kg
(long) w. support bracket with support plate
56,5±0,6 187,5±2
160,5±1
66
5x7
2˚
EC centrifugal,
0,5
86±
forward
22
Ø1
50
90
Ø168±0,5
Ø200±1
Ø404
Ø138
Ø268
Ø404
Ø260
Ø257
Ø370
EC-SYSTEMS
4
113 1,5 5xM6
164 Depth of screw 12-16 mm
Cable gland Accessories
2,5
60
3 x 100
Technology
Ø257
Ø257
8 x Ø11
8 x Ø11
4 x Ø9
450 15 450
Contacts
361
Inlet nozzle Guard grille Electr. connection
p. 550 f. p. 553 p. 607
EC centrifugal fans and modules
backward curved, 3-D, Ø 450
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A °C p. 607
*3G 450 M3G 112-GA A 1~ 200-277 50/60 1365 0.64 2.90 -25 to +60 L1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LwA tL
Curves [rpm] [kW] [A] [dB(A)] [%]
[in H O]
2
A
A 2 1345 0.60 2.70 75 57
A 3 1330 0.64 2.90 71 66
2,0
3
A 8 1060 0.30 1.40 67 61
A 9 760 0.10 0.50 65 —
300 A 10 760 0.12 0.60 59 57
8
A 11 760 0.13 0.60 58 68
1,0
12
0,5
6
11
100
10
9 5 1
0 1000 2000 3000 [CFM]
362
information
General
– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage detection
AC centrifugal,
• PFC (active) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation
backward
• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Electronics / motor overtemperature protection
• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked-rotor protection
• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start
– EMC: Interference emission acc. to EN 61000-6-4 (industrial environment)
Interference immunity acc. to EN 61000-6-2 (industrial environment)
Harmonics acc. to DIN EN 61000-3-2/3
AC centrifugal,
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
forward
– Connection leads: Via terminal strip
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal
EC centrifugal,
centrifugal fan
backward
Mass of
bracket
plate
Centrifugal fan kg Inlet nozzle Centrifugal module kg Centrifugal module kg
(long) w. support bracket with support plate
EC centrifugal,
28
Ø1
forward
87
49
Ø200 ±1
Ø168±0,5
Ø284,5
Ø455
Ø138
Ø300
Ø485
Ø289
Ø450
EC-SYSTEMS
140 4 1,5 5xM6
209 Depth of screw 12-16 mm
2,5
70
3 x 120
Ø284,5
Ø284,5
Technology
8 x Ø11
8 x Ø11
4 x Ø9
580 15 580
Contacts
363
Inlet nozzle Guard grille Electr. connection
p. 550 f. p. 553 p. 607
EC centrifugal fans and modules
backward curved, 3-D, Ø 450
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A °C p. 607
*3G 450 M3G 112-GA A 3~ 200-240 50/60 1560 1.01 3.20 -25 to +60 L2)
subject to alterations (1) Nominal data in operating point with maximum load and 200 VAC
n P1 I LwA tL
Curves [rpm] [kW] [A] [dB(A)] [%]
2,5 [in H O]
2
A
A 2 1555 0.91 2.90 78 58
4
A 3 1555 1.01 3.20 74 67
600
A 4 1560 0.96 3.10 77 60
A 5 1345 0.43 1.60 80 —
2,0
500 3
A 6 1315 0.53 2.00 73 60
A 7 1300 0.58 2.00 70 71
8 A 8 1315 0.54 1.90 72 62
400
A 9 985 0.19 0.80 71 —
1,5
12
200 11 6
0,5
10
100
9 5 1
0 1000 2000 3000 [CFM]
364
information
General
– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection
AC centrifugal,
• PFC (passive) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation
backward
• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Electronics / motor overtemperature protection
• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked-rotor protection
• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
AC centrifugal,
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
forward
– Connection leads: Via terminal strip
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal
EC centrifugal,
centrifugal fan
backward
Mass of
bracket
plate
Centrifugal fan kg Inlet nozzle Centrifugal module kg Centrifugal module kg
(long) w. support bracket with support plate
EC centrifugal,
28
Ø1
forward
87
49
Ø200 ±1
Ø168±0,5
Ø284,5
Ø455
Ø138
Ø300
Ø485
Ø289
Ø450
EC-SYSTEMS
140 4 1,5 5xM6
209 Depth of screw 12-16 mm
2,5
70
3 x 120
Ø284,5
Ø284,5
Technology
8 x Ø11
8 x Ø11
4 x Ø9
580 15 580
Contacts
365
Inlet nozzle Guard grille Electr. connection
p. 550 f. p. 553 p. 607
EC centrifugal fans and modules
backward curved, 3-D, Ø 450
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A °C p. 607
*3G 450 M3G 112-GA A 3~ 380-480 50/60 1560 1.01 1.60 -25 to +60 L2)
subject to alterations (1) Nominal data in operating point with maximum load and 400 VAC
n P1 I LwA tL
Curves [rpm] [kW] [A] [dB(A)] [%]
2,5 [in H O]
2
A
A 2 1555 0.91 1.50 78 58
4
A 3 1555 1.01 1.60 74 67
600
A 4 1560 0.96 1.50 77 60
A 5 1345 0.43 0.80 80 —
2,0
500 3
A 6 1315 0.53 1.00 73 60
A 7 1300 0.58 1.00 70 71
8 A 8 1315 0.54 1.00 72 62
400
A 9 985 0.19 0.40 71 —
1,5
12
200 11 6
0,5
10
100
9 5 1
0 1000 2000 3000 [CFM]
366
information
General
– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection
AC centrifugal,
• PFC (passive) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation
backward
• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Electronics / motor overtemperature protection
• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked-rotor protection
• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
AC centrifugal,
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
forward
– Connection leads: Via terminal strip
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal
EC centrifugal,
centrifugal fan
backward
Mass of
bracket
plate
Centrifugal fan kg Inlet nozzle Centrifugal module kg Centrifugal module kg
(long) w. support bracket with support plate
EC centrifugal,
28
Ø1
forward
87
49
Ø200 ±1
Ø168±0,5
Ø284,5
Ø455
Ø138
Ø300
Ø485
Ø289
Ø450
EC-SYSTEMS
140 4 1,5 5xM6
209 Depth of screw 12-16 mm
2,5
70
3 x 120
Ø284,5
Ø284,5
Technology
8 x Ø11
8 x Ø11
4 x Ø9
580 15 580
Contacts
367
Inlet nozzle Guard grille Electr. connection
p. 550 f. p. 553 p. 607
EC centrifugal fans and modules
backward curved, 3-D, Ø 450
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A °C p. 608
*3G 450 M3G 150-FF A 3~ 200-240 50/60 2165 2.63 9.80 -25 to +50 M)
subject to alterations (1) Nominal data in operating point with maximum load and 200 VAC
n P1 I LpA tL
Curves [rpm] [kW] [A] [dB(A)] [%]
[in H O]
A
2
11
2
400
6
1,0
10
200
9 5 1
0 1000 2000 3000 4000 5000 [CFM]
368
information
General
– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection
AC centrifugal,
• PFC (passive) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation
backward
• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Electronics / motor overtemperature protection
• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked-rotor protection
• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
AC centrifugal,
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
forward
– Connection leads: Via terminal strip
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: UL, CSA, GOST
Mass of centrifugal
EC centrifugal,
centrifugal fan
backward
Mass of
bracket
plate
Centrifugal fan kg Inlet nozzle Centrifugal module kg Centrifugal module kg
(long) w. support bracket with support plate
219,5 ±1 252 ±
EC centrifugal,
0,3
forward
8x45°
Ø 455
Ø 284,5
Ø 292
Ø 485
Ø 300
Ø 450
8xM10
EC-SYSTEMS
Ø 235
140 -2
209
Cable gland
4
Accessories
630 -1 630 -1
392 ±2,5 15 480 -1 392 ±2,5 15 500 -1
3
3
Ø284,5
Ø284,5
Technology
8 x Ø11
8 x Ø11
580 580±0,5
Contacts
369
Inlet nozzle Guard grille Electr. connection
p. 550 f. p. 553 p. 608
EC centrifugal fans and modules
backward curved, 3-D, Ø 450
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A °C p. 608
*3G 450 M3G 150-FF A 3~ 380-480 50/60 2165 2.63 4.90 -25 to +50 M)
subject to alterations (1) Nominal data in operating point with maximum load and 400 VAC
n P1 I LpA tL
Curves [rpm] [kW] [A] [dB(A)] [%]
[in H O]
A
2
11
2
400
6
1,0
10
200
9 5 1
0 1000 2000 3000 4000 5000 [CFM]
370
information
General
– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection
AC centrifugal,
• PFC (passive) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation
backward
• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Electronics / motor overtemperature protection
• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked-rotor protection
• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
AC centrifugal,
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
forward
– Connection leads: Via terminal strip
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE, UL, CSA, GOST
Mass of centrifugal
EC centrifugal,
centrifugal fan
backward
Mass of
bracket
plate
Centrifugal fan kg Inlet nozzle Centrifugal module kg Centrifugal module kg
(long) w. support bracket with support plate
219,5 ±1 252 ±
EC centrifugal,
0,3
forward
8x45°
Ø 455
Ø 284,5
Ø 292
Ø 485
Ø 300
Ø 450
8xM10
EC-SYSTEMS
Ø 235
140 -2
209
Cable gland
4
Accessories
630 -1 630 -1
392 ±2,5 15 480 -1 392 ±2,5 15 500 -1
3
3
Ø284,5
Ø284,5
Technology
8 x Ø11
8 x Ø11
580 580±0,5
Contacts
371
Inlet nozzle Guard grille Electr. connection
p. 550 f. p. 553 p. 608
EC centrifugal fan
backward curved, 3-D, Ø 500
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 605
*3G 500 M3G 084-FA A 1~ 200-277 50/60 810 265 1.60 -25 to +40 K1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LwA tL
Curves [rpm] [W] [A] [dB(A)] [%]
[in H O]
2
A
A 2 765 244 1.50 63 56
A 3 750 265 1.60 59 61
1,00
8
A 12 485 52 0.40 52 49
100 7
2
12
0,25
11 6
50
10
9 5 1
0 1000 2000 3000 [CFM]
372
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Alarm relay
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 61800-5-1, CE
– Approvals: UL, CSA; VDE, CCC, GOST are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
243 ±2
75
Depth of screw 8-10 mm
145 ±1 45˚
47,7 28 M6
EC centrifugal,
49
87
forward
Ø150 ±0,25
Ø102
Ø480
Ø178
Ø100
Ø355
Ø505
Ø342
Ø337
Ø470
4x90˚
85 0
+2
0 0 Ø164 ±0,35
EC-SYSTEMS
8
15
2
min.174,2 4
max. 234,5
Core-end sleeves
Accessories
Technology
Contacts
373
Inlet nozzle Guard grille Electr. connection
p. 550 f. p. 553 p. 605
EC centrifugal fans and modules
backward curved, 3-D, Ø 500
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A °C p. 607
*3G 500 M3G 112-GA A 1~ 200-277 50/60 1125 0.71 3.20 -25 to +60 L1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LwA tL
Curves [rpm] [kW] [A] [dB(A)] [%]
[in H O]
2
A
4
A 2 1110 0.66 3.00 74 59
350 A 3 1100 0.71 3.20 70 69
A 4 1110 0.69 3.10 70 66
1,25
300
A 5 920 0.29 1.30 75 —
A 6 905 0.35 1.60 69 64
3
A 7 900 0.37 1.60 68 75
1,00
250
8 A 8 900 0.36 1.60 68 75
A 9 665 0.12 0.60 66 —
200 A 10 650 0.12 0.70 60 65
0,75
7
A 11 650 0.13 0.70 58 78
2
A 12 655 0.14 0.70 57 82
150
12
0,50
6
100 11
0,25
10
50
9 5 1
0 1000 2000 3000 4000 [CFM]
374
information
General
– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage detection
AC centrifugal,
• PFC (active) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation
backward
• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Electronics / motor overtemperature protection
• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked-rotor protection
• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start
– EMC: Interference emission acc. to EN 61000-6-4 (industrial environment)
Interference immunity acc. to EN 61000-6-2 (industrial environment)
Harmonics acc. to DIN EN 61000-3-2/3
AC centrifugal,
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
forward
– Connection leads: Via terminal strip
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal
EC centrifugal,
centrifugal fan
backward
Mass of
bracket
plate
Centrifugal fan kg Inlet nozzle Centrifugal module kg Centrifugal module kg
(long) w. support bracket with support plate
56,5±0,6 239±2
180,5 ±1 75
5x
72
˚
0,5
28
86 ±
EC centrifugal,
Ø1
87
49
forward
Ø168 ±0,5
Ø200 ±1
Ø480
Ø138
Ø355
Ø505
Ø342
Ø337
Ø470
EC-SYSTEMS
175 2 5xM6
5
233 Depth of screw 12-16 mm
2,5
70
3 x 120
Technology
Ø337
Ø337
8 x Ø11
8 x Ø11
4 x Ø9
580 15 580
Contacts
375
Inlet nozzle Guard grille Electr. connection
p. 550 f. p. 553 p. 607
EC centrifugal fans and modules
backward curved, 3-D, Ø 500
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A °C p. 607
*3G 500 M3G 112-GA A 3~ 200-240 50/60 1160 0.82 2.90 -25 to +60 L2)
subject to alterations (1) Nominal data in operating point with maximum load and 200 VAC
n P1 I LwA tL
Curves [rpm] [kW] [A] [dB(A)] [%]
[in H O]
2
A
A 2 1160 0.74 2.60 75 58
A 3 1160 0.82 2.90 72 69
A 4 1160 0.76 2.70 71 66
400
4 A 5 1005 0.36 1.50 78 —
1,5
12
6
0,5
11
100
10
9 5 1
0 1000 2000 3000 4000 [CFM]
376
information
General
– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection
AC centrifugal,
• PFC (passive) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation
backward
• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Electronics / motor overtemperature protection
• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked-rotor protection
• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
AC centrifugal,
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
forward
– Connection leads: Via terminal strip
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal
EC centrifugal,
centrifugal fan
backward
Mass of
bracket
plate
Centrifugal fan kg Inlet nozzle Centrifugal module kg Centrifugal module kg
(long) w. support bracket with support plate
56,5±0,6 239±2
180,5 ±1 75
5x
72
˚
0,5
28
86 ±
EC centrifugal,
Ø1
87
49
forward
Ø168 ±0,5
Ø200 ±1
Ø480
Ø138
Ø355
Ø505
Ø342
Ø337
Ø470
EC-SYSTEMS
175 2 5xM6
5
233 Depth of screw 12-16 mm
2,5
70
3 x 120
Technology
Ø337
Ø337
8 x Ø11
8 x Ø11
4 x Ø9
580 15 580
Contacts
377
Inlet nozzle Guard grille Electr. connection
p. 550 f. p. 553 p. 607
EC centrifugal fans and modules
backward curved, 3-D, Ø 500
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A °C p. 607
*3G 500 M3G 112-GA A 3~ 380-480 50/60 1160 0.82 1.50 -25 to +60 L2)
subject to alterations (1) Nominal data in operating point with maximum load and 400 VAC
n P1 I LwA tL
Curves [rpm] [kW] [A] [dB(A)] [%]
[in H O]
2
A
A 2 1160 0.74 1.30 75 58
A 3 1160 0.82 1.50 72 69
A 4 1160 0.76 1.40 71 66
400
4 A 5 1005 0.36 0.70 78 —
1,5
12
6
0,5
11
100
10
9 5 1
0 1000 2000 3000 4000 [CFM]
378
information
General
– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection
AC centrifugal,
• PFC (passive) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation
backward
• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Electronics / motor overtemperature protection
• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked-rotor protection
• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
AC centrifugal,
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
forward
– Connection leads: Via terminal strip
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal
EC centrifugal,
centrifugal fan
backward
Mass of
bracket
plate
Centrifugal fan kg Inlet nozzle Centrifugal module kg Centrifugal module kg
(long) w. support bracket with support plate
56,5±0,6 239±2
180,5 ±1 75
5x
72
˚
0,5
28
86 ±
EC centrifugal,
Ø1
87
49
forward
Ø168 ±0,5
Ø200 ±1
Ø480
Ø138
Ø355
Ø505
Ø342
Ø337
Ø470
EC-SYSTEMS
175 2 5xM6
5
233 Depth of screw 12-16 mm
2,5
70
3 x 120
Technology
Ø337
Ø337
8 x Ø11
8 x Ø11
4 x Ø9
580 15 580
Contacts
379
Inlet nozzle Guard grille Electr. connection
p. 550 f. p. 553 p. 607
EC centrifugal fans and modules
backward curved, 3-D, Ø 500
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A °C p. 608
*3G 500 M3G 150-FF A 3~ 200-240 50/60 1700 2.80 8.50 -25 to +50 M)
subject to alterations (1) Nominal data in operating point with maximum load and 200 VAC
n P1 I LpA tL
Curves [rpm] [kW] [A] [dB(A)] [%]
A
A 2 1700 2.50 7.80 79 57
A 3 1700 2.65 8.20 78 65
4,0
2
A 12 1100 0.70 2.60 65 56
400
12 6
11
1,0
200 10
9 5 1
0 1000 2000 3000 4000 5000 6000 [CFM]
380
information
General
– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection
AC centrifugal,
• PFC (passive) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation
backward
• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Electronics / motor overtemperature protection
• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked-rotor protection
• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
AC centrifugal,
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
forward
– Connection leads: Via terminal strip
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: UL, CSA, GOST
Mass of centrifugal
EC centrifugal,
centrifugal fan
backward
Mass of
bracket
plate
Centrifugal fan kg Inlet nozzle Centrifugal module kg Centrifugal module kg
(long) w. support bracket with support plate
219,5 ±1 252 ±
EC centrifugal,
0,3
forward
Ø 337-2
8x45°
Ø 342
Ø 505
Ø 355
Ø 470
8xM10
EC-SYSTEMS
Ø 235
175 -2
233
Cable gland 5
Accessories
630 -1 630 -1
384 ±2,5 15 550 -1 384 ±2,5 15 500 -1
3
3
Ø337-2
Ø 337-2
Technology
8 x Ø11
8 x Ø11
580 580±0,5
Contacts
381
Inlet nozzle Guard grille Electr. connection
p. 550 f. p. 553 p. 608
EC centrifugal fans and modules
backward curved, 3-D, Ø 500
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A °C p. 608
*3G 500 M3G 150-FF A 3~ 380-480 50/60 1700 2.70 4.30 -25 to +60 M)
subject to alterations (1) Nominal data in operating point with maximum load and 400 VAC
n P1 I LpA tL
Curves [rpm] [kW] [A] [dB(A)] [%]
A
A 2 1700 2.50 3.90 79 57
A 3 1700 2.65 4.10 78 65
4,0
2
A 12 1100 0.70 1.30 65 56
400
12 6
11
1,0
200 10
9 5 1
0 1000 2000 3000 4000 5000 6000 [CFM]
382
information
General
– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection
AC centrifugal,
• PFC (passive) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation
backward
• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Electronics / motor overtemperature protection
• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked-rotor protection
• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
AC centrifugal,
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
forward
– Connection leads: Via terminal strip
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE, UL, CSA, GOST
Mass of centrifugal
EC centrifugal,
centrifugal fan
backward
Mass of
bracket
plate
Centrifugal fan kg Inlet nozzle Centrifugal module kg Centrifugal module kg
(long) w. support bracket with support plate
219,5 ±1 252 ±
EC centrifugal,
0,3
forward
Ø 337-2
8x45°
Ø 342
Ø 505
Ø 355
Ø 470
8xM10
EC-SYSTEMS
Ø 235
175 -2
233
Cable gland 5
Accessories
630 -1 630 -1
384 ±2,5 15 550 -1 384 ±2,5 15 500 -1
3
3
Ø337-2
Ø 337-2
Technology
8 x Ø11
8 x Ø11
580 580±0,5
Contacts
383
Inlet nozzle Guard grille Electr. connection
p. 550 f. p. 553 p. 608
EC centrifugal fan
backward curved, 3-D, Ø 560
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A °C p. 607
*3G 560 M3G 112-GA A 1~ 200-277 50/60 945 0.79 3.50 -25 to +60 L1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LwA tL
Curves [rpm] [kW] [A] [dB(A)] [%]
[in H O]
2
A
A 2 945 0.69 3.10 71 70
350 4
A 3 945 0.79 3.50 70 74
A 4 945 0.71 3.20 71 66
1,25
300
A 5 760 0.24 1.20 69 46
A 6 735 0.31 1.40 67 77
3 A 7 725 0.34 1.60 68 81
1,00
100 6
12
11
0,25
50 10
9 5 1
0 1000 2000 3000 4000 [CFM]
384
information
General
– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage detection
AC centrifugal,
• PFC (active) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation
backward
• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Electronics / motor overtemperature protection
• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked-rotor protection
• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start
– EMC: Interference emission acc. to EN 61000-6-4 (industrial environment)
Interference immunity acc. to EN 61000-6-2 (industrial environment)
Harmonics acc. to DIN EN 61000-3-2/3
AC centrifugal,
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
forward
– Connection leads: Via terminal strip
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE, UL, CSA, CCC, GOST are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
56,5±0,6 264±2
180,5 ±1 82
5x
72
˚
0,5
30
86 ±
EC centrifugal,
Ø1
95
60
forward
Ø168 ±0,5
Ø200 ±1
Ø540
Ø138
Ø398
Ø565
Ø385
Ø380
Ø515
EC-SYSTEMS
195 2 5xM6
5
258 Depth of screw 12-16 mm
385
Inlet nozzle Guard grille Electr. connection
p. 550 f. p. 553 p. 607
EC centrifugal fans and modules
backward curved, 3-D, Ø 560
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A °C p. 608
*3G 560 M3G 150-FF A 3~ 200-240 50/60 1350 2.30 7.00 -25 to +55 M)
subject to alterations (1) Nominal data in operating point with maximum load and 200 VAC
n P1 I LpA tL
Curves [rpm] [kW] [A] [dB(A)] [%]
[in H O]
A
2
500 3
A 9 910 0.45 1.80 67 —
A 10 910 0.60 2.20 65 60
400 7 A 11 910 0.70 2.40 64 65
1,5
11 6
200
10
0,5
100
9 5 1
0 2000 4000 6000 [CFM]
386
information
General
– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection
AC centrifugal,
• PFC (passive) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation
backward
• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Electronics / motor overtemperature protection
• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked-rotor protection
• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
AC centrifugal,
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
forward
– Connection leads: Via terminal strip
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: UL, CSA, GOST
Mass of centrifugal
EC centrifugal,
centrifugal fan
backward
Mass of
bracket
plate
Centrifugal fan kg Inlet nozzle Centrifugal module kg Centrifugal module kg
(long) w. support bracket with support plate
219,5 ±1 252 ±
EC centrifugal,
0,3
forward
Ø 380 -2
8x45°
Ø 385
Ø 565
Ø 398
Ø 515
8xM10
EC-SYSTEMS
Ø 235
195 -2
258
Cable gland 5
Accessories
800 -1 800 -1
416 ±2,5 15 550 -1 416 ±2,5 15 560 -1
3
3
Ø380-2
Ø 380-2
Technology
8 x Ø11
8 x Ø11
750 750±0,5
Contacts
387
Inlet nozzle Guard grille Electr. connection
p. 550 f. p. 553 p. 608
EC centrifugal fans and modules
backward curved, 3-D, Ø 560
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A °C p. 608
*3G 560 M3G 150-FF A 3~ 380-480 50/60 1350 2.30 3.60 -25 to +60 M)
subject to alterations (1) Nominal data in operating point with maximum load and 400 VAC
n P1 I LpA tL
Curves [rpm] [kW] [A] [dB(A)] [%]
[in H O]
A
2
500 3
A 9 910 0.45 0.90 67 —
A 10 910 0.60 1.10 65 60
400 7 A 11 910 0.70 1.20 64 65
1,5
11 6
200
10
0,5
100
9 5 1
0 2000 4000 6000 [CFM]
388
information
General
– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection
AC centrifugal,
• PFC (passive) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation
backward
• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Electronics / motor overtemperature protection
• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked-rotor protection
• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
AC centrifugal,
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
forward
– Connection leads: Via terminal strip
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE, UL, CSA, GOST
Mass of centrifugal
EC centrifugal,
centrifugal fan
backward
Mass of
bracket
plate
Centrifugal fan kg Inlet nozzle Centrifugal module kg Centrifugal module kg
(long) w. support bracket with support plate
219,5 ±1 252 ±
EC centrifugal,
0,3
forward
Ø 380 -2
8x45°
Ø 385
Ø 565
Ø 398
Ø 515
8xM10
EC-SYSTEMS
Ø 235
195 -2
258
Cable gland 5
Accessories
800 -1 800 -1
416 ±2,5 15 550 -1 416 ±2,5 15 560 -1
3
3
Ø380-2
Ø 380-2
Technology
8 x Ø11
8 x Ø11
750 750±0,5
Contacts
389
Inlet nozzle Guard grille Electr. connection
p. 550 f. p. 553 p. 608
EC centrifugal fans and modules
backward curved, 3-D, Ø 560
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A °C p. 608
*3G 560 M3G 150-IF A 3~ 200-240 50/60 1510 2.90 9.20 -25 to +45 M)
subject to alterations (1) Nominal data in operating point with maximum load and 200 VAC
n P1 I LpA tL
Curves [rpm] [kW] [A] [dB(A)] [%]
[in H O]
A 1
A
2
4
A 6 1200 1.30 4.20 73 60
800 A 7 1200 1.55 5.00 71 68
3,0
12 2
1,0
11 6
200
0,5
10
9 5 1
0 2000 4000 6000 8000 [CFM]
390
information
General
– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection
AC centrifugal,
• PFC (passive) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation
backward
• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Electronics / motor overtemperature protection
• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked-rotor protection
• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
AC centrifugal,
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
forward
– Connection leads: Via terminal strip
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: UL, CSA, GOST
Mass of centrifugal
EC centrifugal,
centrifugal fan
backward
Mass of
bracket
plate
Centrifugal fan kg Inlet nozzle Centrifugal module kg Centrifugal module kg
(long) w. support bracket with support plate
249,5 ±1 252 ±
EC centrifugal,
0,3
forward
Ø 380 -2
8x45°
Ø 385
Ø 565
Ø 398
Ø 515
8xM10
EC-SYSTEMS
Ø 235
195 -2
258
Cable gland 5
Accessories
800 -1 800 -1
416 ±2,5 15 550 -1 416 ±2,5 15 560 -1
3
3
Ø380-2
Ø 380-2
Technology
8 x Ø11
8 x Ø11
750 750±0,5
Contacts
391
Inlet nozzle Guard grille Electr. connection
p. 550 f. p. 553 p. 608
EC centrifugal fans and modules
backward curved, 3-D, Ø 560
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A °C p. 608
*3G 560 M3G 150-IF A 3~ 380-480 50/60 1510 3.10 4.90 -25 to +60 M)
subject to alterations (1) Nominal data in operating point with maximum load and 400 VAC
n P1 I LpA tL
Curves [rpm] [kW] [A] [dB(A)] [%]
[in H O]
A 1
A
2
4
A 6 1200 1.30 2.10 73 60
800 A 7 1200 1.55 2.50 71 68
3,0
12 2
1,0
11 6
200
0,5
10
9 5 1
0 2000 4000 6000 8000 [CFM]
392
information
General
– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection
AC centrifugal,
• PFC (passive) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation
backward
• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Electronics / motor overtemperature protection
• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked-rotor protection
• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
AC centrifugal,
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
forward
– Connection leads: Via terminal strip
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE, UL, CSA, GOST
Mass of centrifugal
EC centrifugal,
centrifugal fan
backward
Mass of
bracket
plate
Centrifugal fan kg Inlet nozzle Centrifugal module kg Centrifugal module kg
(long) w. support bracket with support plate
249,5 ±1 252 ±
EC centrifugal,
0,3
forward
Ø 380 -2
8x45°
Ø 385
Ø 565
Ø 398
Ø 515
8xM10
EC-SYSTEMS
Ø 235
195 -2
258
Cable gland 5
Accessories
800 -1 800 -1
416 ±2,5 15 550 -1 416 ±2,5 15 560 -1
3
3
Ø380-2
Ø 380-2
Technology
8 x Ø11
8 x Ø11
750 750±0,5
Contacts
393
Inlet nozzle Guard grille Electr. connection
p. 550 f. p. 553 p. 608
EC centrifugal fan
backward curved, 3-D, Ø 630
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A °C p. 607
*3G 630 M3G 112-GA A 3~ 380-480 50/60 685 0.53 1.00 -25 to +60 L2)
subject to alterations (1) Nominal data in operating point with maximum load and 400 VAC
n P1 I LwA tL
Curves [rpm] [kW] [A] [dB(A)] [%]
[in H O]
2
A
A 2 685 0.47 0.90 67 57
A 3 685 0.53 1.00 65 68
1,00
12
0,25
6
50 11
10
9 5 1
0 1000 2000 3000 4000 5000 [CFM]
2000 4000 6000 8000 [m3/h]
394
information
General
– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection
AC centrifugal,
• PFC (passive) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation
backward
• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Electronics / motor overtemperature protection
• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked-rotor protection
• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
AC centrifugal,
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
forward
– Connection leads: Via terminal strip
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE, UL, CSA, CCC, GOST are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
Inlet nozzle
Centrifugal fan kg (long)
56,5±0,6 296
180,5±1
98,5
5x
72
˚
0,5
86 ±
EC centrifugal,
37
Ø1
14
72
forward
Ø168±0,5
Ø427-2
Ø635
Ø200
Ø138
Ø447
Ø635
Ø433
Ø634
EC-SYSTEMS
220 6 2 5xM6
290 Depth of screw 12-16 mm
395
Inlet nozzle Guard grille Electr. connection
p. 550 f. p. 553 p. 607
EC centrifugal fans and modules
backward curved, 3-D, Ø 630
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A °C p. 608
*3G 630 M3G 150-FF A 3~ 200-240 50/60 1000 1.70 5.30 -25 to +60 M)
subject to alterations (1) Nominal data in operating point with maximum load and 200 VAC
n P1 I LpA tL
Curves [rpm] [kW] [A] [dB(A)] [%]
[in H O]
A
2
700
A 6 770 0.65 2.40 64 54
A 7 770 0.73 2.80 64 66
2,5
500
4
400
1,5
300 3
1,0
200
7 2
0,5
100 6
5 1
0 2000 4000 6000 8000 10000 [CFM]
396
information
General
– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection
AC centrifugal,
• PFC (passive) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation
backward
• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Electronics / motor overtemperature protection
• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked-rotor protection
• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
AC centrifugal,
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
forward
– Connection leads: Via terminal strip
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: UL, CSA, GOST
Mass of centrifugal
EC centrifugal,
centrifugal fan
backward
Mass of
bracket
plate
Centrifugal fan kg Inlet nozzle Centrifugal module kg Centrifugal module kg
(long) w. support bracket with support plate
252 ±
EC centrifugal,
219,5 ±1 0,3
forward
Ø 427-2
8x45°
Ø 433
Ø 635
Ø 447
Ø 634
8xM10
EC-SYSTEMS
Ø 235
220 -2
290
Cable gland 6
Accessories
800 -1 800 -1
463,5 ±2,5 15 550 -1 463,5 ±2,5 15 630 -1
3
3
Ø427-2
Ø 427-2
Technology
8 x Ø11
8 x Ø11
397
Inlet nozzle Guard grille Electr. connection
p. 550 f. p. 553 p. 608
EC centrifugal fans and modules
backward curved, 3-D, Ø 630
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A °C p. 608
*3G 630 M3G 150-FF A 3~ 380-480 50/60 1000 1.70 2.80 -25 to +60 M)
subject to alterations (1) Nominal data in operating point with maximum load and 400 VAC
n P1 I LpA tL
Curves [rpm] [kW] [A] [dB(A)] [%]
[in H O]
A
2
700
A 6 770 0.65 1.20 64 54
A 7 770 0.73 1.40 64 66
2,5
500
4
400
1,5
300 3
1,0
200
7 2
0,5
100 6
5 1
0 2000 4000 6000 8000 10000 [CFM]
398
information
General
– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection
AC centrifugal,
• PFC (passive) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation
backward
• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Electronics / motor overtemperature protection
• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked-rotor protection
• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
AC centrifugal,
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
forward
– Connection leads: Via terminal strip
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE, UL, CSA, GOST
Mass of centrifugal
EC centrifugal,
centrifugal fan
backward
Mass of
bracket
plate
Centrifugal fan kg Inlet nozzle Centrifugal module kg Centrifugal module kg
(long) w. support bracket with support plate
252 ±
EC centrifugal,
219,5 ±1 0,3
forward
Ø 427-2
8x45°
Ø 433
Ø 635
Ø 447
Ø 634
8xM10
EC-SYSTEMS
Ø 235
220 -2
290
Cable gland 6
Accessories
800 -1 800 -1
463,5 ±2,5 15 550 -1 463,5 ±2,5 15 630 -1
3
3
Ø427-2
Ø 427-2
Technology
8 x Ø11
8 x Ø11
399
Inlet nozzle Guard grille Electr. connection
p. 550 f. p. 553 p. 608
EC centrifugal fans and modules
backward curved, 3-D, Ø 630
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A °C p. 608
*3G 630 M3G 150-IF A 3~ 200-240 50/60 1200 2.80 8.40 -25 to +45 M)
subject to alterations (1) Nominal data in operating point with maximum load and 200 VAC
n P1 I LwA tL
Curves [rpm] [kW] [A] [dB(A)] [%]
[in H O]
A
2
700
A 6 1050 1.61 4.80 80 52
A 7 1050 1.78 5.40 79 64
2,5
12 7
300
1,0
2
11
200 6
10
0,5
100
9 5 1
0 2000 4000 6000 8000 10000 [CFM]
400
information
General
– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection
AC centrifugal,
• PFC (passive) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation
backward
• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Electronics / motor overtemperature protection
• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked-rotor protection
• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
AC centrifugal,
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
forward
– Connection leads: Via terminal strip
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: UL, CSA, GOST
Mass of centrifugal
EC centrifugal,
centrifugal fan
backward
Mass of
bracket
plate
Centrifugal fan kg Inlet nozzle Centrifugal module kg Centrifugal module kg
(long) w. support bracket with support plate
252 ±
EC centrifugal,
249,5 ±1 0,3
forward
Ø 427-2
8x45°
Ø 433
Ø 635
Ø 447
Ø 634
8xM10
EC-SYSTEMS
Ø 235
220 -2
290
Cable gland 6
Accessories
800 -1 800 -1
463,5 ±2,5 15 550 -1 463,5 ±2,5 15 630 -1
3
3
Ø427-2
Ø 427-2
Technology
8 x Ø11
8 x Ø11
401
Inlet nozzle Guard grille Electr. connection
p. 550 f. p. 553 p. 608
EC centrifugal fans and modules
backward curved, 3-D, Ø 630
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A °C p. 608
*3G 630 M3G 150-IF A 3~ 380-480 50/60 1200 2.80 4.20 -25 to +55 M)
subject to alterations (1) Nominal data in operating point with maximum load and 400 VAC
n P1 I LwA tL
Curves [rpm] [kW] [A] [dB(A)] [%]
[in H O]
A
2
700
A 6 1050 1.61 2.40 80 52
A 7 1050 1.78 2.70 79 64
2,5
12 7
300
1,0
2
11
200 6
10
0,5
100
9 5 1
0 2000 4000 6000 8000 10000 [CFM]
402
information
General
– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection
AC centrifugal,
• PFC (passive) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation
backward
• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Electronics / motor overtemperature protection
• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked-rotor protection
• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
AC centrifugal,
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
forward
– Connection leads: Via terminal strip
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE, UL, CSA, GOST
Mass of centrifugal
EC centrifugal,
centrifugal fan
backward
Mass of
bracket
plate
Centrifugal fan kg Inlet nozzle Centrifugal module kg Centrifugal module kg
(long) w. support bracket with support plate
252 ±
EC centrifugal,
249,5 ±1 0,3
forward
Ø 427-2
8x45°
Ø 433
Ø 635
Ø 447
Ø 634
8xM10
EC-SYSTEMS
Ø 235
220 -2
290
Cable gland 6
Accessories
800 -1 800 -1
463,5 ±2,5 15 550 -1 463,5 ±2,5 15 630 -1
3
3
Ø427-2
Ø 427-2
Technology
8 x Ø11
8 x Ø11
403
Inlet nozzle Guard grille Electr. connection
p. 550 f. p. 553 p. 608
404
EC centrifugal fans with aluminium impeller, line-fed
EC centrifugal fans for clean rooms backward curved
Ø 310 - Ø 450
405
406
Contacts Technology Accessories EC-SYSTEMS EC centrifugal, EC centrifugal, back- EC centrifugal, AC centrifugal, AC centrifugal, General
forward ward for clean rooms backward forward backward information
EC centrifugal fans and modules
backward curved, 3-D, Ø 310, RS485, ebmBUS
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 606
*3G 310 M3G 084-DF A 1~ 200-277 50/60 2340 370 1.70 -25 to +40 K2)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves (established with long inlet nozzle) [rpm] [W] [A] [dB(A)] [%]
[in H O]
A
2
12 A 14 910 42 0.20 47 63
200 11 6
A 15 910 46 0.20 47 66
A 16 910 44 0.20 48 48
0,5
100 16 10
15
14
13 9 5 1
0 250 500 750 1000 1250 [CFM]
406
information
General
– Technical features: • Operation and alarm display: Reversible voltage output 0 V / +15 V (max. 50 mA)
AC centrifugal,
• PFC (active) • Over-temperature protected electronics / motor
backward
• RS485 ebmBUS
– EMC: Interference emission acc. to EN 61000-6-4 (industrial environment)
Interference immunity acc. to EN 61000-6-2 (industrial environment)
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
– Electrical connection: Via connection lead with plug (accessory)
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 61800-5-1, CE
– Approvals: UL, CSA; VDE, CCC, GOST are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
plate
Centrifugal fan kg Inlet nozzle Inlet nozzle Centrifugal module kg
(long) (short) with support plate
45,5 M6
18
EC centrifugal,
55,5
35
forward
Ø150 ±0,25
Ø208,1
4x90°
Ø318
Ø220
Ø102
Ø178
Ø100
Ø211
Ø300
Y X
EC-SYSTEMS
min. 69,5 Ø164±0,35
2
max. 110,5 View Y View X
(1)
in alarm mode = 0 V
(2)
in alarm mode = +15 V
192,4±3
48,5 143,9 2,5 440±2
Technology
350±1
WA
RN
AT
ING
TE
NT
!
Dan acito
ION
Cap
gero r disc
! Tem
Tens de
us harg ereu
ps
volta
ions dech
ges! time
dang arge
e
ses! cond
5
des
min!
ensa
teur
s5
minu
tes!
171
6,4±0,2
Dangerous voltages!
WARNING! Capacitor discharge time 5 min!
Tensions dangereuses!
ATTENTION!Temps de decharge des condensateurs 5 minutes!
81 420±0,5
Contacts
407
Inlet nozzle Guard grille Connection lead Electr. connection
p. 550 f. p. 553 p. 559 p. 606
EC centrifugal fans and modules
backward curved, 3-D, Ø 310, RS485, ebmBUS
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 606
*3G 310 M3G 084-FA A 1~ 200-277 50/60 2200 455 2.00 -25 to +40 K2)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves (established with long inlet nozzle) [rpm] [W] [A] [dB(A)] [%]
[in H O]
2
A
A 2 2150 430 1.90 70 60
700 A 3 2130 455 2.00 68 64
A 4 2170 420 1.80 69 54
2,5
600
A 5 1800 200 0.90 68 —
4 A 6 1800 265 1.20 65 60
A 7 1800 285 1.20 63 64
2,0
12 A 14 1000 44 0.20 48 60
200 6
11 A 15 1000 47 0.20 48 64
A 16 1000 41 0.20 49 54
0,5
16 10
100 15
14
13 9 5 1
0 500 1000 1500 [CFM]
408
information
General
– Technical features: • Operation and alarm display: Reversible voltage output 0 V / +15 V (max. 50 mA)
AC centrifugal,
• PFC (active) • Over-temperature protected electronics / motor
backward
• RS485 ebmBUS
– EMC: Interference emission acc. to EN 61000-6-4 (industrial environment)
Interference immunity acc. to EN 61000-6-2 (industrial environment)
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
– Electrical connection: Via connection lead with plug (accessory)
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 61800-5-1, CE
– Approvals: UL, CSA; VDE, CCC, GOST are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
plate
Centrifugal fan kg Inlet nozzle Inlet nozzle Centrifugal module kg
(long) (short) with support plate
45,5 M6
18
EC centrifugal,
55,5
35
forward
Ø150 ±0,25
Ø208,1
4x90°
Ø318
Ø220
Ø102
Ø178
Ø100
Ø211
Ø300
Y X
EC-SYSTEMS
min. 100,5 Ø164±0,35
2
max. 140,5 View Y View X
(1)
in alarm mode = 0 V
(2)
in alarm mode = +15 V
223,5±3
48,5 175 2,5 440±2
Technology
350±1
WA
RN
AT
ING
TE
NT
!
Dan acito
ION
Cap
gero r disc
! Tem
Tens de
us harg ereu
ps
volta
ions dech
ges! time
dang arge
e
ses! cond
5
des
min!
ensa
teur
s5
minu
tes!
171
6,4±0,2
Dangerous voltages!
WARNING! Capacitor discharge time 5 min!
Tensions dangereuses!
ATTENTION!Temps de decharge des condensateurs 5 minutes!
81 420±0,5
Contacts
409
Inlet nozzle Guard grille Connection lead Electr. connection
p. 550 f. p. 553 p. 559 p. 606
EC centrifugal fans and modules
backward curved, 3-D, Ø 355, RS485, ebmBUS
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 606
*3G 355 M3G 084-FA A 1~ 200-277 50/60 1840 430 1.90 -25 to +40 K2)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves (established with long inlet nozzle) [rpm] [W] [A] [dB(A)] [%]
[in H O]
A
2
500
A 8 1540 235 1.00 63 58
A 9 1260 115 0.50 64 —
3
8
400 A 10 1260 150 0.70 60 56
1,5
11 2 A 14 890 67 0.30 52 56
200
6
A 15 890 70 0.30 49 70
16 A 16 890 59 0.30 49 58
0,5
10
100 15
14
13 9 5 1
0 500 1000 1500 [CFM]
410
information
General
– Technical features: • Operation and alarm display: Reversible voltage output 0 V / +15 V (max. 50 mA)
AC centrifugal,
• PFC (active) • Over-temperature protected electronics / motor
backward
• RS485 ebmBUS
– EMC: Interference emission acc. to EN 61000-6-4 (industrial environment)
Interference immunity acc. to EN 61000-6-2 (industrial environment)
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
– Electrical connection: Via connection lead with plug (accessory)
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 61800-5-1, CE
– Approvals: VDE, UL, CSA; CCC, GOST are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
plate
Centrifugal fan kg Inlet nozzle Inlet nozzle Centrifugal module kg
(long) (short) with support plate
143±1
22 M6
EC centrifugal,
45,5 ,5
forward
44
70
Ø150±0,25
Ø236,4
4x90°
Ø360
Ø250
Ø102
Ø178
Ø100
Ø240
Ø350
Y X
Ø164 ±0,35
EC-SYSTEMS
min. 95,5
2 View Y View X
max. 148 (1)
in alarm mode = 0 V
(2)
in alarm mode = +15 V
233,5±3
48,5 185 2,5 496±2
Technology
380±1
WA
RN
AT
ING
TE
NT
!
Dan acito
ION
Cap
gero r disc
! Tem
Tens de
us harg ereu
ps
volta
ions dech
ges! time
dang arge
e
ses! cond
5
des
min!
ensa
teur
s5
minu
tes!
188
6,4±0,2
Dangerous voltages!
WARNING! Capacitor discharge time 5 min!
Tensions dangereuses!
ATTENTION!Temps de decharge des condensateurs 5 minutes!
94 476±0,5
Contacts
411
Inlet nozzle Connection lead Electr. connection
p. 550 f. p. 559 p. 606
EC centrifugal fans and modules
backward curved, 3-D, Ø 355, RS485, ebmBUS
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 606
*3G 355 M3G 084-FA A 1~ 200-277 50/60 1710 395 1.80 -25 to +40 K2)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves (established with long inlet nozzle) [rpm] [W] [A] [dB(A)] [%]
[in H O]
2
A
A 2 1660 375 1.60 67 58
A 3 1650 395 1.80 64 68
600
A 4 1670 365 1.60 66 57
A 5 1400 166 0.70 65 —
2,0
7
12 A 13 1000 60 0.30 55 —
2
200 A 14 1000 82 0.40 53 58
11
16
6
A 15 1000 90 0.40 51 68
0,5
15
10
A 16 1000 80 0.40 53 57
100
14
13 9 5 1
0 500 1000 1500 2000 [CFM]
412
information
General
– Technical features: • Operation and alarm display: Reversible voltage output 0 V / +15 V (max. 50 mA)
AC centrifugal,
• PFC (active) • Over-temperature protected electronics / motor
backward
• RS485 ebmBUS
– EMC: Interference emission acc. to EN 61000-6-4 (industrial environment)
Interference immunity acc. to EN 61000-6-2 (industrial environment)
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
– Electrical connection: Via connection lead with plug (accessory)
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 61800-5-1, CE
– Approvals: VDE, UL, CSA; CCC, GOST are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
plate
Centrifugal fan kg Inlet nozzle Inlet nozzle Centrifugal module kg
(long) (short) with support plate
143±1
22 M6
EC centrifugal,
45,5 ,5
forward
44
70
Ø150±0,25
Ø236,4
4x90°
Ø360
Ø250
Ø102
Ø178
Ø100
Ø240
Ø350
Y X
Ø164 ±0,35
EC-SYSTEMS
min. 120
2 View Y View X
max. 172,5 (1)
in alarm mode = 0 V
(2)
in alarm mode = +15 V
257,5±3
48,5 209 2,5 496±2
Technology
380±1
WA
RN
AT
ING
TE
NT
!
Dan acito
ION
Cap
gero r disc
! Tem
Tens de
us harg ereu
ps
volta
ions dech
ges! time
dang arge
e
ses! cond
5
des
min!
ensa
teur
s5
minu
tes!
188
6,4±0,2
Dangerous voltages!
WARNING! Capacitor discharge time 5 min!
Tensions dangereuses!
ATTENTION!Temps de decharge des condensateurs 5 minutes!
94 476±0,5
Contacts
413
Inlet nozzle Connection lead Electr. connection
p. 550 f. p. 559 p. 606
EC centrifugal fans and modules
backward curved, 3-D, Ø 400, RS485 ebmBUS
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 606
*3G 400 M3G 084-FA A 1~ 200-277 50/60 1470 370 1.65 -25 to +40 K2)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
[in H O]
2
A
A 2 1430 362 1.60 69 53
A 3 1420 370 1.65 64 68
600
A 4 1470 319 1.40 66 52
A 5 1300 210 0.90 71 —
2,0
8
A 10 910 100 0.40 57 53
3
300
A 11 910 108 0.50 53 68
A 12 910 92 0.40 51 52
1,0
200
12
2
0,5
11 6
100
10
9 5 1
0 500 1000 1500 2000 [CFM]
414
information
General
– Technical features: • Operation and alarm display: Reversible voltage output 0 V / +15 V (max. 50 mA)
AC centrifugal,
• PFC (active) • Over-temperature protected electronics / motor
backward
• RS485 ebmBUS
– EMC: Interference emission acc. to EN 61000-6-4 (industrial environment)
Interference immunity acc. to EN 61000-6-2 (industrial environment)
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
– Electrical connection: Via connection lead with plug (accessory)
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 61800-5-1, CE
– Approvals: UL, CSA; VDE, CCC, GOST are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
plate
157 ±1,8
66 Depth of screw 8-10 mm
143 ±1 45°
45,5 22 M6
EC centrifugal,
50
90
forward
Ø150±0,25
4x90°
Ø102
Ø178
Ø100
Ø268
Ø404
Ø257
Ø370
Y X
EC-SYSTEMS
Ø164 ±0,35
246,4±3
48,5 197,9 2,5 560±2
Technology
409±1
WA
RN
AT
ING
TE
NT
!
Dan acito
ION
Cap
gero r disc
! Tem
Tens de
us harg ereu
ps
volta
ions dech
ges! time
dang arge
e
ses! cond
5
des
min!
ensa
teur
s5
minu
tes!
210
6,4±0,2
Dangerous voltages!
WARNING! Capacitor discharge time 5 min!
Tensions dangereuses!
ATTENTION!Temps de decharge des condensateurs 5 minutes!
94 520±0,5
Contacts
415
Inlet nozzle Guard grille Connection lead Electr. connection
p. 550 f. p. 553 p. 559 p. 606
EC centrifugal fans and modules
backward curved, 3-D, Ø 400, RS485 ebmBUS
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A °C p. 606
*3G 400 M3G 084-FA A 1~ 200-277 50/60 1420 380 1.70 -25 to +40 K2)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
[in H O]
2
A
A 2 1395 355 1.55 71 40
A 3 1370 380 1.70 66 64
600
A 4 1415 333 1.45 69 54
A 5 1120 187 0.80 68 —
2,0
A 9
A 10 800 92 0.40 58 40
3
300 A 11 800 97 0.40 53 64
8
A 12 800 85 0.40 54 54
1,0
7
200
12
0,5
11 2
100
6
10
9 5 1
0 500 1000 1500 2000 [CFM]
416
information
General
– Technical features: • Operation and alarm display: Reversible voltage output 0 V / +15 V (max. 50 mA)
AC centrifugal,
• PFC (active) • Over-temperature protected electronics / motor
backward
• RS485 ebmBUS
– EMC: Interference emission acc. to EN 61000-6-4 (industrial environment)
Interference immunity acc. to EN 61000-6-2 (industrial environment)
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
– Electrical connection: Via connection lead with plug (accessory)
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 61800-5-1, CE
– Approvals: UL, CSA; VDE, CCC, GOST are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
plate
180 ±1,8
66 Depth of screw 8-10 mm
143 ±1 45°
45,5 22 M6
EC centrifugal,
50
90
forward
Ø150±0,25
4x90°
Ø102
Ø178
Ø100
Ø268
Ø404
Ø257
Ø370
Y X
EC-SYSTEMS
Ø164 ±0,35
269,4±3
48,5 220,9 2,5 560±2
Technology
409±1
WA
RN
AT
ING
TE
NT
!
Dan acito
ION
Cap
gero r disc
! Tem
Tens de
us harg ereu
ps
volta
ions dech
ges! time
dang arge
e
ses! cond
5
des
min!
ensa
teur
s5
minu
tes!
210
6,4±0,2
Dangerous voltages!
WARNING! Capacitor discharge time 5 min!
Tensions dangereuses!
ATTENTION!Temps de decharge des condensateurs 5 minutes!
94 520±0,5
Contacts
417
Inlet nozzle Guard grille Connection lead Electr. connection
p. 550 f. p. 553 p. 559 p. 606
EC centrifugal fans and modules
backward curved, 3-D, Ø 450, RS485, ebmBUS
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A °C p. 606
*3G 450 M3G 112-EA A 1~ 200-277 50/60 1225 0.50 2.20 -25 to +40 K2)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves [rpm] [kW] [A] [dB(A)] [%]
[in H O]
A
2
6
12
0,4
100 11
10
9 5 1
0 1000 2000 3000 [CFM]
418
information
General
– Technical features: • Operation and alarm display: Reversible voltage output 0 V / +15 V (max. 50 mA)
AC centrifugal,
• PFC (active) • Over-temperature protected electronics / motor
backward
• RS485 ebmBUS
– EMC: Interference emission acc. to EN 61000-6-4 (industrial environment)
Interference immunity acc. to EN 61000-6-2 (industrial environment)
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
– Electrical connection: Via connection lead with plug (accessory)
AC centrifugal,
– Protection class: I (acc. to EN 61800-5-1)
forward
– Product conforming to standard: CE
– Approvals: UL, CSA, VDE, CCC, GOST are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
plate
44,5±0,6 227,5±2
75
148,5±1
5x
72
˚
,5
±0
86
EC centrifugal,
Ø1
forward
28
87
49
Ø168±0,5
Ø200±1
Ø455
Ø138
Ø300
Ø485
Ø291
Ø289
Ø450
5xM6
EC-SYSTEMS
Depth of screw
Y X 12-16 mm
Technology
Ø284,5
360
120
8xØ11
4xØ9
15
580±0,5
Contacts
419
Inlet nozzle Guard grille Connection lead Electr. connection
p. 550 f. p. 553 p. 559 p. 606
420
information
General
EC centrifugal fans and blowers forward curved
AC centrifugal,
backward
EC centrifugal fans and blowers, single inlet, 24 / 48 VDC Ø 085 - Ø 160 422
EC centrifugal fans and blowers, single inlet, line-fed Ø 108 - Ø 450 438
AC centrifugal,
forward
EC centrifugal blowers, dual inlet, line-fed Ø 146 - Ø 180 510
EC centrifugal,
backward
ward for clean rooms
EC centrifugal, back-
EC centrifugal,
forward
EC-SYSTEMS
Accessories
Technology
Contacts
421
EC centrifugal fans and blowers
single inlet, Ø 085
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Nominal data
Type Motor VDC VDC m3/h rpm W A dB(A) Pa °C p. 600
n P1 LpA tL
Curves [rpm] [W] [dB(A)] [%]
A 1’ 3180 19 59 —
[Pa]
[in H O]
A
2
A 2’ 3300 16 57 28
A 3’ 3500 15 57 32
240
A 4’ 3800 12 57 37
A 1 2850 14 57 —
4' UR
0,8
200 A 2 3000 12 55 28
A 3 3180 11 55 32
4 A 4 3400 9 54 37
160
A 5 1890 5 46 —
0,6
A 6 1970 4 44 25
UN
120 3' A 7 2070 4 44 30
A 8 2170 3 42 33
3
0,4
80
8
2'
0,2
2
7
40
5 1 1'
0 10 20 30 40 50 [CFM]
20 40 60 80 [m3/h]
422
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Reverse polarity and locked-rotor protection
backward
– Cable exit: Axial
– Protection class: I
– Product conforming to standard: EN 60950-1
– Approvals: A (48 VDC) CCC
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Centrifugal blower
Centrifugal fan kg with flange kg
68 ±1 Depth of screw
45,4 ±1 max. 4 mm
EC centrifugal,
forward
M4
Ø67
Ø59
Ø85
6
Ø34
EC-SYSTEMS
60
300±20 42 47±0,15
56 3
4,5
20˚
34,5
42
58
3x1
68
39
Ø65 -1
127,5
Technology
84
M4
71,5
6
60
80 300
Contacts
423
Inlet nozzle Guard grille Electr. connection
p. 552 p. 554 p. 600
EC centrifugal fans and blowers
single inlet, Ø 097
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Nominal data
Type Motor VDC VDC m3/h rpm W A dB(A) Pa °C p. 600
n P1 LpA tL
Curves [rpm] [W] [dB(A)] [%]
A 1’ 2920 22 62 —
[Pa]
[in H O]
A
2
A 2’ 3030 21 61 41
4' A 3’ 3300 17 59 48
280 A 4’ 3700 13 58 48
UR
A 1 2650 16 59 —
1,0
240 4 A 2 2730 15 58 41
A 3 2960 13 56 48
A 4 3290 10 55 48
0,8
200
3' A 5 1615 4 45 —
UN A 6 1650 4 45 38
160
0,6
3 A 7 1745 4 43 46
A 8 1880 3 42 47
120
0,4
80 8
2'
0,2
7 2
40
5 1 1'
0 10 20 30 40 50 60 [CFM]
20 40 60 80 100 [m3/h]
424
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Reverse polarity and locked-rotor protection
backward
– Cable exit: Axial
– Protection class: I
– Product conforming to standard: EN 60950-1
– Approvals: A (48 VDC) CCC
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Centrifugal blower
Centrifugal fan kg without flange kg
33 ±1 Depth of screw
49,4 ±1 max. 4 mm
EC centrifugal,
forward
M4
Ø77,5
Ø59
Ø97
6
Ø34
EC-SYSTEMS
60
300±20 25 47±0,15
75
18
40 3
24
56
,5˚
46
3
75
Technology
6
137
Ø80
Ø96
60
20˚
3x1
300
Contacts
425
Inlet nozzle Guard grille Electr. connection
p. 552 p. 554 p. 600
EC centrifugal fans and blowers
single inlet, Ø 108
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Nominal data
Type Motor VDC VDC m3/h rpm W A dB(A) Pa °C p. 600
*1G 108 M1G 055-BD A 24 16-28 200 3000 42 2.00 65 0 -25 to +60 G)
*1G 108 M1G 055-BD A 48 36-57 200 3000 42 1.00 65 0 -25 to +60 G)
subject to alterations
n P1 LpA tL
Curves [rpm] [W] [dB(A)] [%]
A 1’ 3230 55 67 —
[Pa]
[in H O]
A
2
A 2’ 3410 52 66 33
A 3’ 3800 43 65 41
2,0
500 A 4’ 4100 35 64 33
A 1 3000 42 65 —
4'
UR A 2 3140 40 64 33
400 A 3 3420 32 63 41
1,5
A 4 3690 26 63 33
4
A 5 2300 20 61 —
300 3'
A 6 2380 17 58 33
UN A 7 2550 14 55 41
1,0
3
A 8 2720 11 55 33
200
8
7
0,5
2'
100 2
5 1 1'
0 20 40 60 80 100 120 [CFM]
426
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Reverse polarity and locked-rotor protection
backward
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
– Cable exit: Axial
– Protection class: I
– Product conforming to standard: EN 60950-1
– Approvals: A (24 VDC) UL, CSA, A (48 VDC) CCC
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Centrifugal blower
Centrifugal fan kg with flange kg
63 ±1 Depth of screw
55 ±1 max. 6 mm
EC centrifugal,
forward
M4
Ø108
Ø84
Ø72
6
Ø58
EC-SYSTEMS
85
450±20 52 58 ±0,15
76
83
66
50
183
118
Ø87-1
Technology
6 M4
85
71
450±20
82
Contacts
427
Inlet nozzle Guard grille Air filter Electr. connection
p. 552 p. 554 p. 563 p. 600
EC centrifugal fans and blowers
single inlet, Ø 120
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Nominal data
Type Motor VDC VDC m3/h rpm W A dB(A) Pa °C p. 600
*1G 120 M1G 055-BD A 24 16-28 255 2200 40 1.90 62 0 -25 to +60 G)
*1G 120 M1G 055-BD A 48 36-57 255 2200 40 0.95 62 0 -25 to +60 G)
subject to alterations
n P1 LpA tL
Curves [rpm] [W] [dB(A)] [%]
A 1’ 2410 50 63 —
[Pa]
[in H O]
A
2
A 2’ 2620 47 62 58
A 3’ 2870 44 61 60
2,0
500 A 4’ 3200 36 62 55
A 1 2200 40 62 —
UR A 2 2410 36 60 59
400 A 3 2600 32 58 62
4'
1,5
A 4 2880 25 58 55
A 5 1870 24 55 —
300 4 A 6 1990 21 54 58
UN
A 7 2100 18 53 61
1,0
3'
A 8 2310 14 54 54
200 3
8
7
0,5
2'
100 2
5 1 1'
0 50 100 150 [CFM]
428
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Reverse polarity and locked-rotor protection
backward
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
– Cable exit: Axial
– Protection class: I
– Product conforming to standard: EN 60950-1
– Approvals: A (24 VDC) UL, CSA, A (48 VDC) CCC
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Centrifugal blower
Centrifugal fan kg with flange kg
83 ±1 Depth of screw
55±1 max. 6 mm
EC centrifugal,
forward
M4
Ø120
Ø97
Ø72
6
Ø58
EC-SYSTEMS
85
450±20 62 58 ±0,15
100
7
76
83
68
50
98
190
132
Ø100 -1
Technology
M4
82
86
6
85
98 450 ±20
Contacts
429
Inlet nozzle Guard grille Air filter Electr. connection
p. 552 p. 554 p. 563 p. 600
EC centrifugal fans and blowers
single inlet, Ø 133
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Nominal data
Type Motor VDC VDC m3/h rpm W A dB(A) Pa °C p. 600
*1G 133 M1G 055-BD A 24 16-28 225 2000 40 2.20 64 0 -25 to +60 G)
*1G 133 M1G 055-BD A 48 36-57 225 2000 45 1.10 64 0 -25 to +60 G)
subject to alterations
n P1 LpA tL
Curves [rpm] [W] [dB(A)] [%]
A 1’ 2170 57 66 —
[Pa]
[in H O]
A
2
A 2’ 2410 51 66 47
A 3’ 2750 44 64 49
3200 36 66 32
2,0
500 A 4’
4' A 1 2000 45 64 —
A 2 2230 40 64 49
400 A 3 2540 35 62 51
1,5
4 UR A 4 2920 27 63 33
UN 3' A 5 1750 28 60 —
300 A 6 1910 24 59 50
3
A 7 2120 20 58 53
1,0
8 A 8 2370 15 59 35
200
7
2'
2
0,5
6
100
5 1 1'
0 40 80 120 [CFM]
430
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Reverse polarity and locked-rotor protection
backward
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
– Cable exit: Lateral
– Protection class: I
– Product conforming to standard: EN 60950-1
– Approvals: A (24 VDC) UL, CSA, A (48 VDC) CCC
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Centrifugal blower
Centrifugal fan kg without flange kg
66 ±1 Depth of screw
55±1 max. 6 mm
EC centrifugal,
forward
M4
Ø108
Ø133
Ø72
6
Ø58
EC-SYSTEMS
85
450±20 46 58 ±0,15
4x90˚
71
45˚
3
101
180
Ø112
Technology
140
450±20
85
81
6
Contacts
431
Inlet nozzle Electr. connection
p. 552 p. 600
EC centrifugal fans and blowers
single inlet, Ø 140
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Nominal data
Type Motor VDC VDC m3/h rpm W A dB(A) Pa °C p. 600
*1G 140 M1G 055-CF A 24 16-28 400 1750 54 2.50 63 0 -25 to +60 G)
*1G 140 M1G 055-CF A 48 36-57 410 1750 54 1.30 63 0 -25 to +60 G)
subject to alterations
n P1 LpA tL
Curves [rpm] [W] [dB(A)] [%]
A 1’ 1850 65 64 —
[Pa]
[in H O]
A
2
A 2’ 2020 61 61 50
A 3’ 2200 57 59 54
A 4’ 2550 43 60 40
400
A 1 1750 54 63 —
1,5
4'
A 2 1900 50 59 51
A 3 2030 45 58 54
300 A 4 2310 32 58 40
4
UN
3'
UR A 5 1500 34 60 —
1,0
A 6 1580 29 56 50
3 A 7 1670 25 54 53
200 A 8 1880 19 53 41
8
7 2'
0,5
100
6
5 1 1'
0 50 100 150 200 250 [CFM]
432
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Reverse polarity and locked-rotor protection
backward
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
– Cable exit: Axial
– Protection class: I
– Product conforming to standard: EN 60950-1
– Approvals: A (48 VDC) CCC
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Centrifugal blower
Centrifugal fan kg with flange kg
72 ±1 Depth of screw
68,2 ±1 max. 6 mm
EC centrifugal,
forward
M4
Ø121
Ø140
Ø72
6
Ø58
EC-SYSTEMS
85
450±20 59 58 ±0,15
94
120
105
92
max. 262,6
450±20 158
Ø118-1
Technology
M4
107
6
85
100 ±1
Contacts
433
Inlet nozzle Guard grille Air filter Electr. connection
p. 552 p. 554 p. 563 p. 600
EC centrifugal fans and blowers
single inlet, Ø 146
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Nominal data
Type Motor VDC VDC m3/h rpm W A dB(A) Pa °C p. 600
*1G 146 M1G 074-BF A 24 16-28 470 2200 100 5.00 68 0 -25 to +60 G)
*1G 146 M1G 074-BF A 48 36-57 465 2150 100 2.60 67 0 -25 to +60 G)
subject to alterations
n P1 LpA tL
Curves (established at 24 VDC) [rpm] [W] [dB(A)] [%]
A 1’ 2400 140 70 —
[Pa]
[in H O]
A
2
A 2’ 2650 130 67 45
3000 110 66 49
3,0
A 3’
4'
600 A 2 2445 90 65 46
A 3 2750 84 64 49
4 UR A 4 3025 77 65 45
2,0
500 3'
A 5 1890 68 63 —
UN 3
A 6 2075 57 60 46
400
A 7 2250 48 61 49
1,5
8
A 8 2335 41 61 45
2'
300
7
A 9 1520 37 59 —
2
1,0
A 10 1670 32 55 46
12
200 A 11 1815 27 55 49
11 6
A 12 1920 23 55 45
0,5
10
100
9 5 1 1'
0 50 100 150 200 250 300 [CFM]
434
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Reverse polarity and locked-rotor protection
backward
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
– Cable exit: Axial
– Protection class: I
– Product conforming to standard: EN 60950-1
– Approvals: UL, CSA, CCC (centrifugal blower only)
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Centrifugal blower
Centrifugal fan kg with flange kg
Depth of screw
72 ±1 max. 6 mm
EC centrifugal,
65 ±1
M4
forward
15
0,
±
58
max. Ø146,5
min. Ø119,5
Ø92
6
32,7
EC-SYSTEMS
85
450 +20 max. 62,5
94
120
105
92
max. 262,6
Ø125,5-1
M4
108
6
85
100 ±1
Contacts
435
Inlet nozzle Guard grille Air filter Electr. connection
p. 552 p. 554 p. 563 p. 600
EC centrifugal fans and blowers
single inlet, Ø 160
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Nominal data
Type Motor VDC VDC m3/h rpm W A dB(A) Pa °C p. 600
*1G 160 M1G 074-BF A 24 16-28 505 1750 105 5.80 67 0 -25 to +60 G)
*1G 160 M1G 074-BF A 48 36-57 505 1750 105 2.90 67 0 -25 to +60 G)
subject to alterations
n P1 LpA tL
Curves [rpm] [W] [dB(A)] [%]
A 1’ 1890 134 68 —
[Pa]
[in H O]
A
2
A 2’ 2200 118 67 52
900
A 3’ 2500 110 67 57
A 4’ 2900 102 69 52
800
A 1 1750 105 67 —
3,0
700 A 2 2030 95 66 52
4' UR A 3 2270 90 65 57
600 A 4 2550 81 67 44
4 A 5 1580 72 62 —
2,0
500 A 6 1810 66 62 52
3'
UN A 7 2000 58 62 57
400 8 3 A 8 2200 48 63 54
300 7
2'
1,0
2
200 6
100
5 1 1'
0 100 200 300 [CFM]
436
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Reverse polarity and locked-rotor protection
backward
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
– Cable exit: Axial
– Protection class: I
– Product conforming to standard: EN 60950-1
– Approvals: UL, CSA
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Centrifugal blower
Centrifugal fan kg with flange kg
Depth of screw
72 ±1 max. 6 mm
EC centrifugal,
65 ±1
M4
forward
15
0,
±
58
max. Ø160,5
min. Ø136
Ø92
6
32,7
EC-SYSTEMS
85
450 +20 max. 62
94
120
105
92
max. 262,6
Technology
M4
108
6
85
100 ±1
Contacts
437
Inlet nozzle Guard grille Air filter Electr. connection
p. 552 p. 554 p. 563 p. 600
EC centrifugal fan and blowers
single inlet, Ø 108
Electr. connection
Nominal voltage
Max. current
Max. power
Speed/rpm
Frequency
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A Pa °C p. 601
*3G 108 M3G 055-BD A 1~ 115 50/60 2960 60 0.90 0 -25 to +60 H1)
subject to alterations (1) Nominal data in operating point with maximum load and 115 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
A 1 2960 60 0.90 64 —
[Pa]
[in H O]
A
2
A 2 3100 53 0.80 62 42
A 3 3370 42 0.60 60 44
A 4 3560 34 0.50 59 32
400
A 5 2570 38 0.55 61 —
1,5
A 6 2660 34 0.50 60 42
4
A 7 2820 25 0.40 57 44
300
A 8 2920 19 0.30 55 32
3 A 9 2150 23 0.35 56 —
1,0
A 10 2200 20 0.30 55 42
8
A 11 2320 16 0.25 52 44
200 A 12 2390 12 0.20 50 32
7
A 13 1400 9 0.20 46 —
12
A 14 1425 8 0.20 44 42
0,5
11
2
A 15 1490 7 0.20 40 44
100
6
A 16 1530 6 0.20 40 32
16
15 10
14
13 9 5 1
0 25 50 75 100 125 150 [CFM]
438
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Locked-rotor protection
backward
• Output 10 VDC max. 1.1 mA
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, CE
– Approvals: GOST; VDE, UL, CSA, CCC are applied for
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Centrifugal blower
Centrifugal fan kg with flange kg
EC centrifugal,
forward
max. Ø95
Ø58 ±0,15
Ø115
Ø108
Ø72
Ø84
450+20
EC-SYSTEMS
85
52
105±0,2
6
115 159
97 79
8
Accessories
76
83
66
50
183
168,5
Ø118
Ø87-1
Technology
M4
71
450+20
85
82
110,5
6
Contacts
439
Inlet nozzle Guard grille Air filter Electr. connection
p. 552 p. 554 p. 563 p. 601
EC centrifugal fan and blowers
single inlet, Ø 108
Electr. connection
Nominal voltage
Max. current
Max. power
Speed/rpm
Frequency
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A Pa °C p. 601
*3G 108 M3G 055-BD A 1~ 230 50/60 2800 50 0.38 0 -25 to +60 H1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
A 1 2800 50 0.38 64 —
[Pa]
[in H O]
A
2
A 2 2950 44 0.35 62 42
A 3 3120 33 0.25 60 44
A 4 3260 25 0.20 59 32
A 8 2920 19 0.15 55 32
3
8
A 9 2150 23 0.20 56 —
200 A 10 2200 20 0.15 55 42
7
A 11 2320 16 0.15 52 44
12
A 12 2390 12 0.10 50 32
11
A 13 1400 9 0.10 46 —
0,5
A 14 1425 8 0.10 44 42
100 2
A 15 1490 7 0.10 40 44
6
A 16 1530 6 0.10 40 32
16
15 10
14
13 9 5 1
0 25 50 75 100 125 150 [CFM]
440
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Locked-rotor protection
backward
• Output 10 VDC max. 1.1 mA
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, CE
– Approvals: GOST; VDE, UL, CSA, CCC are applied for
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Centrifugal blower
Centrifugal fan kg with flange kg
EC centrifugal,
forward
max. Ø95
Ø58 ±0,15
Ø115
Ø108
Ø72
Ø84
450+20
EC-SYSTEMS
85
52
105±0,2
6
115 159
97 79
8
Accessories
76
83
66
50
183
168,5
Ø118
Ø87-1
Technology
M4
71
450+20
85
82
110,5
6
Contacts
441
Inlet nozzle Guard grille Air filter Electr. connection
p. 552 p. 554 p. 563 p. 601
EC centrifugal fan and blowers
single inlet, Ø 120
Electr. connection
Nominal voltage
Max. current
Max. power
Speed/rpm
Frequency
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A Pa °C p. 601
*3G 120 M3G 055-BD A 1~ 115 50/60 2320 46 0.70 0 -25 to +60 H1)
subject to alterations (1) Nominal data in operating point with maximum load and 115 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
A 1 2320 46 0.70 61 —
[Pa]
[in H O]
A
2
A 2 2490 40 0.60 59 52
A 3 2640 33 0.50 58 58
A 4 2880 24 0.40 57 51
A 8 2445 18 0.30 54 52
8 3 A 9 1830 24 0.40 54 —
200 A 10 1920 20 0.30 52 50
A 11 2010 17 0.30 51 54
12 7
A 12 2115 13 0.20 51 52
A 13 1430 13 0.20 48 —
0,5
11
2
A 14 1500 12 0.20 45 50
100 16
A 15 1580 10 0.20 44 54
6
15
10
A 16 1640 8 0.20 44 52
14
13 9 5 1
0 25 50 75 100 125 150 [CFM]
442
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Locked-rotor protection
backward
• Output 10 VDC max. 1.1 mA
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, CE
– Approvals: GOST; VDE, UL, CSA, CCC are applied for
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Centrifugal blower
Centrifugal fan kg with flange kg
EC centrifugal,
forward
max. Ø95
Ø58±0,15
Ø115
Ø120
Ø72
Ø97
450 +20
EC-SYSTEMS
85
62
105±0,2
6
115 178
100 82
7
Accessories
76
83
68
50
98
190
Ø100-1
Ø132
Technology
M4
82
86
450 +20
85
82
6
110
Contacts
443
Inlet nozzle Guard grille Air filter Electr. connection
p. 552 p. 554 p. 563 p. 601
EC centrifugal fan and blowers
single inlet, Ø 120
Electr. connection
Nominal voltage
Max. current
Max. power
Speed/rpm
Frequency
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A Pa °C p. 601
*3G 120 M3G 055-BD A 1~ 230 50/60 2200 41 0.30 0 -25 to +60 H1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
A 1 2200 41 0.30 62 —
[Pa]
[in H O]
A
2
A 2 2320 34 0.25 59 51
A 3 2440 28 0.20 57 55
A 4 2600 20 0.15 57 49
4
A 8 2445 18 0.15 54 52
8 A 9 1830 24 0.20 54 —
200 A 10 1920 20 0.15 52 50
3
A 11 2010 17 0.15 51 54
12 7
A 12 2115 13 0.10 51 52
A 13 1430 13 0.10 48 —
0,5
11
A 14 1500 12 0.10 45 50
100 16 2 A 15 1580 10 0.10 44 54
6
15
10
A 16 1640 8 0.10 44 52
14
13 9 5 1
0 25 50 75 100 125 150 [CFM]
444
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Locked-rotor protection
backward
• Output 10 VDC max. 1.1 mA
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, CE
– Approvals: GOST; VDE, UL, CSA, CCC are applied for
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Centrifugal blower
Centrifugal fan kg with flange kg
EC centrifugal,
forward
max. Ø95
Ø58±0,15
Ø115
Ø120
Ø72
Ø97
450 +20
EC-SYSTEMS
85
62
105±0,2
6
115 178
100 82
7
Accessories
76
83
68
50
98
190
Ø100-1
Ø132
Technology
M4
82
86
450 +20
85
82
6
110
Contacts
445
Inlet nozzle Guard grille Air filter Electr. connection
p. 552 p. 554 p. 563 p. 601
EC centrifugal fan and blowers
single inlet, Ø 133
Electr. connection
Nominal voltage
Max. current
Max. power
Speed/rpm
Frequency
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A Pa °C p. 601
*3G 133 M3G 055-BD A 1~ 115 50/60 2000 42 0.60 0 -25 to +60 H1)
subject to alterations (1) Nominal data in operating point with maximum load and 115 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
A 1 2000 42 0.60 64 —
[Pa]
[in H O]
A
2
A 2 2140 37 0.55 62 42
A 3 2310 30 0.45 60 52
A 4 2460 23 0.35 58 51
A 8 2120 17 0.25 56 51
A 9 1495 18 0.30 55 —
200 3
8 A 10 1570 16 0.25 54 45
A 11 1640 13 0.20 51 53
7 A 12 1730 10 0.20 50 51
12 A 13 1100 9 0.20 49 —
0,5
11 2
A 14 1140 8 0.20 47 45
100
A 15 1200 7 0.20 44 53
6
16 A 16 1250 6 0.20 41 51
15 10
14
13 9 5 1
0 25 50 75 100 125 150 [CFM]
446
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Locked-rotor protection
backward
• Output 10 VDC max. 1.1 mA
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, CE
– Approvals: GOST; VDE, UL, CSA, CCC are applied for
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Centrifugal blower
Centrifugal fan kg without flange kg
EC centrifugal,
forward
max. Ø95
Ø58 ±0,15
Ø115
Ø72
108
133
450+20
EC-SYSTEMS
85
46 105±0,2
6
171
59 87
Accessories
4x90°
45°
71
Ø112-1
180
Ø14
0
Technology
79
450 +20
85
Ø3
6
92,5
Contacts
447
Inlet nozzle Electr. connection
p. 552 p. 601
EC centrifugal fan and blowers
single inlet, Ø 133
Electr. connection
Nominal voltage
Max. current
Max. power
Speed/rpm
Frequency
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A Pa °C p. 601
*3G 133 M3G 055-BD A 1~ 230 50/60 1925 38 0.30 0 -25 to +60 H1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
A 1 1925 38 0.30 63 —
[Pa]
[in H O]
A
2
A 2 2070 34 0.25 62 45
A 3 2210 27 0.20 60 53
A 4 2330 21 0.15 59 51
4
A 8 2120 17 0.15 56 51
A 9 1495 18 0.15 55 —
200 8 A 10 1570 16 0.15 54 45
3
A 11 1640 13 0.10 51 53
7 A 12 1730 10 0.10 50 51
12 A 13 1100 9 0.10 49 —
0,5
11
A 14 1140 8 0.10 47 45
100 2
A 15 1200 7 0.10 44 53
6
16 A 16 1250 6 0.10 41 51
15 10
14
13 9 5 1
0 25 50 75 100 125 150 [CFM]
448
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Locked-rotor protection
backward
• Output 10 VDC max. 1.1 mA
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, CE
– Approvals: GOST; VDE, UL, CSA, CCC are applied for
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Centrifugal blower
Centrifugal fan kg without flange kg
EC centrifugal,
forward
max. Ø95
Ø58 ±0,15
Ø115
Ø72
108
133
450+20
EC-SYSTEMS
85
46 105±0,2
6
171
59 87
Accessories
4x90°
45°
71
Ø112-1
180
Ø14
0
Technology
79
450 +20
85
Ø3
6
92,5
Contacts
449
Inlet nozzle Electr. connection
p. 552 p. 601
EC centrifugal fan and blowers
single inlet, Ø 140
Electr. connection
Nominal voltage
Max. current
Max. power
Speed/rpm
Frequency
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A Pa °C p. 601
*3G 140 M3G 055-CF A 1~ 115 50/60 1790 70 1.00 0 -25 to +60 H1)
subject to alterations (1) Nominal data in operating point with maximum load and 115 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
A 1 1790 70 1.00 63 —
[Pa]
[in H O]
A
2
A 2 1900 63 1.00 61 46
A 3 2040 53 0.80 60 61
A 4 2250 36 0.50 58 55
1,25
300
A 5 1410 33 0.60 58 —
4
A 6 1500 30 0.55 56 46
A 7 1600 25 0.45 54 56
1,00
A 8 1790 18 0.30 53 48
3 A 9 1060 14 0.35 51 —
200 A 10 1105 13 0.30 50 46
0,75
A 11 1210 11 0.25 47 56
8
A 12 1355 8 0.20 47 48
A 13 705 4 0.20 40 —
0,50
7
2 A 14 750 4 0.20 39 46
100
12 A 15 800 3 0.20 38 56
11 A 16 895 3 0.20 37 48
0,25
16
15 10
14
13 9 5 1
0 100 200 300 [CFM]
450
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Locked-rotor protection
backward
• Output 10 VDC max. 1.1 mA
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, CE
– Approvals: GOST; VDE, UL, CSA, CCC are applied for
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Centrifugal blower
Centrifugal fan kg with flange kg
EC centrifugal,
forward
max. Ø95
Ø58 ±0,15
Ø115
Ø121
Ø140
Ø72
450 +20
EC-SYSTEMS
85
59 105±0,2
6
115 103
Accessories
105
120
94
92
max. 262,6
Ø118-1
247
Technology
Ø158
M4
450 +20
107
85
6
100±1 16
Contacts
451
Inlet nozzle Guard grille Air filter Electr. connection
p. 552 p. 554 p. 563 p. 601
EC centrifugal fan and blowers
single inlet, Ø 140
Electr. connection
Nominal voltage
Max. current
Max. power
Speed/rpm
Frequency
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A Pa °C p. 601
*3G 140 M3G 055-CF A 1~ 230 50/60 1800 66 0.50 0 -25 to +60 H1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
A 1 1800 66 0.50 63 —
[Pa]
[in H O]
A
2
A 2 1860 58 0.40 62 46
A 3 1970 49 0.35 60 56
A 4 2170 33 0.25 58 48
1,25
300
A 5 1410 33 0.30 58 —
A 6 1500 30 0.25 56 46
4 A 7 1600 25 0.25 54 56
1,00
A 8 1790 18 0.15 53 48
A 9 1060 14 0.15 51 —
200 3 A 10 1105 13 0.15 50 46
0,75
A 11 1210 11 0.15 47 56
8
A 12 1355 8 0.10 47 48
A 13 705 4 0.10 40 —
0,50
7
A 14 750 4 0.10 39 46
100 2
12 A 15 800 3 0.10 38 56
11 A 16 895 3 0.10 37 48
0,25
16
15 10
14
13 9 5 1
0 100 200 300 [CFM]
452
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Locked-rotor protection
backward
• Output 10 VDC max. 1.1 mA
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, CE
– Approvals: GOST; VDE, UL, CSA, CCC are applied for
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Centrifugal blower
Centrifugal fan kg with flange kg
EC centrifugal,
forward
max. Ø95
Ø58 ±0,15
Ø115
Ø121
Ø140
Ø72
450 +20
EC-SYSTEMS
85
59 105±0,2
6
115 103
Accessories
105
120
94
92
max. 262,6
Ø118-1
247
Technology
Ø158
M4
450 +20
107
85
6
100±1 16
Contacts
453
Inlet nozzle Guard grille Air filter Electr. connection
p. 552 p. 554 p. 563 p. 601
EC centrifugal fan and blowers
single inlet, constant air flow, Ø 140
Electr. connection
Nominal voltage
Max. current
Max. power
Speed/rpm
Frequency
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A Pa °C p. 602
*3G 140 M3G 055-CF A 1~ 115 50/60 1340 70 1.00 0 -25 to +60 H2)
subject to alterations (1) Nominal data in operating point with maximum load and 115 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
A 1 2390 29 0.40 59 37
[Pa]
A
A 2 2450 55 0.80 60 50
A 3 2460 67 1.00 60 57
400
A 4 1920 17 0.30 54 38
A 5 1960 30 0.70 55 54
1,5
A 6 2130 55 0.80 60 55
A 7 1300 9 0.20 46 36
300 1 2 3 A 8 1550 22 0.30 51 48
A 9 1760 40 0.60 58 48
1,0
A 10 440 3 0.10 33 —
A 11 880 9 0.15 45 —
200 4 5 6
A 12 1340 25 0.40 55 —
0,5
100 7 8 9
10 11 12
0 50 100 150 200 250 [CFM]
454
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• Input for set value Lin 0-10 VDC / PWM • Tach output
backward
(1.7 V 50 m3/h, 10 V 300 m3/h) • Locked-rotor protection
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, CE
– Approvals: GOST; VDE, UL, CSA, CCC are applied for
– Air intake: Constant air flow curves can only be attained with unobstructed air intake (s. p. 586)
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Centrifugal blower
Centrifugal fan kg with flange kg
EC centrifugal,
forward
max. Ø95
Ø58 ±0,15
Ø115
Ø117
Ø142
Ø72
450 +20
EC-SYSTEMS
85
59 105 ±0,2
6
115 103
Accessories
105
120
94
92
max. 262,6
Ø118-1
247
Technology
Ø158
M4
450 +20
107
85
6
100±1 16
Contacts
455
Inlet nozzle Guard grille Air filter Electr. connection
p. 552 p. 554 p. 563 p. 602
EC centrifugal fan and blowers
single inlet, constant air flow, Ø 140
Electr. connection
Nominal voltage
Max. current
Max. power
Speed/rpm
Frequency
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A Pa °C p. 602
*3G 140 M3G 055-CF A 1~ 230 50/60 1380 70 0.60 0 -25 to +60 H2)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
A 1 2380 33 0.25 59 37
[Pa]
A
A 2 2495 51 0.45 60 50
A 3 2400 67 0.55 60 57
400
A 4 2030 22 0.20 54 38
A 5 2000 34 0.30 55 54
1,5
A 6 2110 61 0.50 60 55
A 7 1325 12 0.10 46 36
300 1 2 3 A 8 1460 21 0.20 51 48
A 9 1755 43 0.35 58 48
1,0
A 10 480 3 0.05 33 —
A 11 890 11 0.10 45 —
200 4 5 6
A 12 1380 31 0.25 55 —
0,5
100 7 8 9
10 11 12
0 50 100 150 200 250 [CFM]
456
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• Input for set value Lin 0-10 VDC / PWM • Tach output
backward
(1.7 V 50 m3/h, 10 V 300 m3/h) • Locked-rotor protection
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, CE
– Approvals: GOST; VDE, UL, CSA, CCC are applied for
– Air intake: Constant air flow curves can only be attained with unobstructed air intake (s. p. 586)
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Centrifugal blower
Centrifugal fan kg with flange kg
EC centrifugal,
forward
max. Ø95
Ø58 ±0,15
Ø115
Ø117
Ø142
Ø72
450 +20
EC-SYSTEMS
85
59 105 ±0,2
6
115 103
Accessories
105
120
94
92
max. 262,6
Ø118-1
247
Technology
Ø158
M4
450 +20
107
85
6
100±1 16
Contacts
457
Inlet nozzle Guard grille Air filter Electr. connection
p. 552 p. 554 p. 563 p. 602
EC centrifugal fan and blowers
single inlet, Ø 146
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A Pa °C p. 603
*3G 146 M3G 074-CF A 1~ 100-130 50/60 2430 170 2.20 0 -25 to +60 J1)
subject to alterations (1) Nominal data in operating point with maximum load and 115 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
[in H O]
A
2
7
A 10 1980 66 0.90 62 39
A 11 2230 65 0.90 60 53
300 12
A 12 2330 48 0.70 59 44
11
1,0
A 13 1250 26 0.40 54 —
200 2
A 14 1390 26 0.40 52 32
6 A 15 1520 24 0.40 51 43
0,5
16 A 16 1560 19 0.30 50 32
15
10
100
14
13 9 5 1
0 100 200 300 [CFM]
458
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Tach output
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE
– Approvals: UL, CSA; CCC, GOST are applied for
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Centrifugal blower
Centrifugal fan kg with flange kg
Depth of screw max. 8 mm (core removing hole prepared for self-tapping screw)
Depth of screw max. 6 mm (core removing hole prepared for self-tapping screw)
117±1,5 M4 Depth of screw 8-10 mm
114±1,5 M4
EC centrifugal,
84,5±1 M4
forward
max. Ø115,3
max. Ø146,5
min. Ø119,5
Ø133±0,3
4x90˚
Ø92
Ø9 8
EC-SYSTEMS
Ø5
Ø1 0
0
+2
0
45
8
85
115 103
Accessories
94
105
120
92
max. 262,6
58
Ø1
Ø125,5 -1
Technology
M4
108
45 85
0 +2
100±1 0
8
132,5±1,5
Contacts
459
Inlet nozzle Guard grille Air filter Electr. connection
p. 552 p. 554 p. 563 p. 603
EC centrifugal fan and blowers
single inlet, Ø 146
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A Pa °C p. 603
*3G 146 M3G 074-CF A 1~ 200-277 50/60 2520 175 1.30 0 -25 to +60 J1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
[in H O]
A
2
7
A 10 2160 84 0.70 64 41
A 11 2240 70 0.60 66 52
300 12
A 12 2310 50 0.40 59 51
11
1,0
A 13 1540 48 0.40 59 —
2
200 A 14 1580 39 0.30 56 34
6
16
A 15 1610 29 0.25 52 41
15
0,5
10 A 16 1640 22 0.20 51 40
100
14
13 9 5 1
0 100 200 300 [CFM]
460
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Tach output
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE
– Approvals: UL, CSA; CCC, GOST are applied for
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Centrifugal blower
Centrifugal fan kg with flange kg
Depth of screw max. 8 mm (core removing hole prepared for self-tapping screw)
Depth of screw max. 6 mm (core removing hole prepared for self-tapping screw)
117±1,5 M4 Depth of screw 8-10 mm
114±1,5 M4
EC centrifugal,
84,5±1 M4
forward
max. Ø115,3
max. Ø146,5
min. Ø119,5
Ø133±0,3
4x90˚
Ø92
Ø9 8
EC-SYSTEMS
Ø5
Ø1 0
0
+2
0
45
8
85
115 103
Accessories
94
105
120
92
max. 262,6
58
Ø1
Ø125,5 -1
Technology
M4
108
45 85
0 +2
100±1 0
8
132,5±1,5
Contacts
461
Inlet nozzle Guard grille Air filter Electr. connection
p. 552 p. 554 p. 563 p. 603
EC centrifugal fan and blowers
single inlet, Ø 160
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A Pa °C p. 603
*3G 160 M3G 074-CF A 1~ 100-130 50/60 2100 170 2.20 0 -25 to +60 J1)
subject to alterations (1) Nominal data in operating point with maximum load and 115 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
[in H O]
A
2
8
A 10 1600 64 0.90 60 36
A 11 1780 61 0.90 60 49
300
7
A 12 1830 41 0.60 58 39
1,0
12
A 13 1020 25 0.40 51 —
200 11 A 14 1080 24 0.40 50 29
A 15 1150 22 0.30 50 37
0,5
2 A 16 1170 16 0.30 47 25
100 16
6
15
10
14
13 9 5 1
0 100 200 300 [CFM]
462
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Tach output
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE
– Approvals: UL, CSA; CCC, GOST are applied for
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Centrifugal blower
Centrifugal fan kg with flange kg
Depth of screw max. 8 mm (core removing hole prepared for self-tapping screw)
Depth of screw max. 6 mm (core removing hole prepared for self-tapping screw)
114±1,5
M4 Depth of screw 8-10 mm
111±1,5
M4
81,5±1
EC centrifugal,
M4
forward
max. Ø115,3
max. Ø160,5
min. Ø136
Ø133±0,3
4x90˚
Ø92
Ø9 8
EC-SYSTEMS
Ø5
Ø1 0
45˚
25
max. 61,7
0
+2
0
45
8
85
115 103
Accessories
94
105
120
92
max. 262,6
75
Ø1
Ø130-1
Technology
M4
108
45 85
0 +2
100±1 0
8
132,5±1,5
Contacts
463
Inlet nozzle Guard grille Air filter Electr. connection
p. 552 p. 554 p. 563 p. 603
EC centrifugal fan and blowers
single inlet, Ø 160
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A Pa °C p. 603
*3G 160 M3G 074-CF A 1~ 200-277 50/60 2150 175 1.30 0 -25 to +60 J1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
[in H O]
A
2
3 A 10 1730 80 0.60 62 37
A 11 1760 60 0.50 59 49
300
7 A 12 1795 41 0.30 58 37
1,0
12
A 13 1190 37 0.30 54 —
200 A 14 1200 33 0.30 53 29
11
A 15 1220 27 0.25 51 35
0,5
16 2 A 16 1240 20 0.20 48 27
100 6
15
10
14
13 9 5 1
0 100 200 300 [CFM]
464
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Tach output
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE
– Approvals: UL, CSA; CCC, GOST are applied for
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Centrifugal blower
Centrifugal fan kg with flange kg
Depth of screw max. 8 mm (core removing hole prepared for self-tapping screw)
Depth of screw max. 6 mm (core removing hole prepared for self-tapping screw)
114±1,5
M4 Depth of screw 8-10 mm
111±1,5
M4
81,5±1
EC centrifugal,
M4
forward
max. Ø115,3
max. Ø160,5
min. Ø136
Ø133±0,3
4x90˚
Ø92
Ø9 8
EC-SYSTEMS
Ø5
Ø1 0
45˚
25
max. 61,7
0
+2
0
45
8
85
115 103
Accessories
94
105
120
92
max. 262,6
75
Ø1
Ø130-1
Technology
M4
108
45 85
0 +2
100±1 0
8
132,5±1,5
Contacts
465
Inlet nozzle Guard grille Air filter Electr. connection
p. 552 p. 554 p. 563 p. 603
EC centrifugal fan and blowers
single inlet, constant air flow, Ø 160
Electr. connection
Nominal voltage
Max. current
Max. power
Speed/rpm
Frequency
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A Pa °C p. 604
*3G 160 M3G 074-BF A 1~ 230 50/60 1340 175 1.30 0 -25 to +60 J2)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
A
A 2 2930 142 1.10 69 52
A 3 2780 175 1.30 71 63
800
A 4 2380 68 0.60 63 47
A 5 2360 88 0.70 65 58
3,0
A 10 610 9 0.10 40 —
A 11 950 22 0.25 51 —
400 4 5 6
A 12 1340 51 0.40 58 —
1,0
200 7 8 9
10 11 12
0 50 100 150 200 250 [CFM]
466
information
General
– Technical features: • PFC (passive) • Over-temperature protected electronics / motor
AC centrifugal,
• Input for set value Lin 0-10 VDC / PWM • Output 10 VDC max. 1.1 mA
backward
(1.7 V 50 m3/h, 10 V 300 m3/h) • Tach output
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE
– Approvals: UL, CSA; CCC, GOST are applied for
– Air intake: Constant air flow curves can only be attained with unobstructed air intake (s. p. 586)
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Centrifugal blower
Centrifugal fan kg with flange kg
Depth of screw max. 8 mm (core removing hole prepared for self-tapping screw)
Depth of screw max. 6 mm (core removing hole prepared for self-tapping screw)
114±1,5
M4 Depth of screw 8-10 mm
111±1,5
M4
81,5±1
EC centrifugal,
M4
forward
max. Ø115,3
max. Ø160,5
min. Ø136
Ø133±0,3
4x90˚
Ø92
Ø9 8
EC-SYSTEMS
Ø5
Ø1 0
45˚
25
max. 61,7
0
+2
0
45
8
85
115 103
Accessories
94
105
120
92
max. 262,6
75
Ø1
Ø130-1
Technology
M4
108
45 85
0 +2
100±1 0
8
132,5±1,5
Contacts
467
Inlet nozzle Guard grille Air filter Electr. connection
p. 552 p. 554 p. 563 p. 604
EC centrifugal fan and blowers
single inlet, Ø 180
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A Pa °C p. 603
*3G 180 M3G 074-CF A 1~ 100-130 50/60 1320 175 2.20 0 -25 to +60 J1)
subject to alterations (1) Nominal data in operating point with maximum load and 115 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
[in H O]
2
A
A 2 1370 151 1.90 65 57
A 3 1460 115 1.50 61 69
A 4 1570 69 0.90 59 59
1,25
300
A 5 990 69 0.90 59 —
A 6 1030 65 0.90 57 54
4
A 7 1080 48 0.70 54 64
1,00
A 8 1130 29 0.40 51 57
A 9 770 35 0.50 52 —
200 A 10 790 30 0.40 50 49
3
0,75
A 11 810 23 0.30 46 55
A 12 840 15 0.20 42 40
8 A 13 560 16 0.20 44 —
0,50
A 14 560 13 0.20 40 38
100 7
A 15 580 11 0.20 36 41
12 A 16 590 8 0.10 33 24
0,25
2
11
16 6
15
10
14
13 9 5 1
0 100 200 300 400 500 600 [CFM]
468
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Tach output
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE
– Approvals: UL, CSA; CCC, GOST are applied for
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Centrifugal blower
Centrifugal fan kg without flange kg
Depth of screw max. 8 mm (core removing hole prepared for self-tapping screw)
Depth of screw max. 6 mm (core removing hole prepared for self-tapping screw)
149,5±1,5
M4 Depth of screw 8-10 mm
146,5±1,5
M4
117±1
EC centrifugal,
M4
forward
max. Ø115,3
max. Ø180,5
min. Ø150
Ø133±0,3
4x90°
Ø92
EC-SYSTEMS
Ø9 8
Ø5
Ø1 0
45°
25
0 max. 92
+2
0
45
8
85
179,5 285
Core-end sleeves 129 123
Accessories
5°
Ø3,2
134
0°
6x6
332
2
Ø19
Ø149-1
Technology
136
45 85
0 +2
0
8
Contacts
469
Inlet nozzle Guard grille Electr. connection
p. 552 p. 554 p. 603
EC centrifugal fan and blowers
single inlet, Ø 180
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A Pa °C p. 603
*3G 180 M3G 074-CF A 1~ 200-277 50/60 1320 162 1.20 150 -25 to +60 J1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
A 1 — — — — —
[Pa]
[in H O]
A
2
3 A 9 745 31 0.50 52 —
A 10 755 28 0.45 49 47
150 2
A 11 775 21 0.35 45 49
A 12 805 15 0.25 42 34
0,5
8 A 13 515 33 0.25 41 —
100 A 14 520 12 0.20 39 33
7
6 A 15 535 10 0.20 35 34
0,25
12
A 16 560 8 0.15 32 20
50 11
10
16
15
14
13 9 5
0 200 400 600 [CFM]
470
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Tach output
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE
– Approvals: UL, CSA; CCC, GOST are applied for
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Centrifugal blower
Centrifugal fan kg without flange kg
Depth of screw max. 8 mm (core removing hole prepared for self-tapping screw)
Depth of screw max. 6 mm (core removing hole prepared for self-tapping screw)
149,5±1,5
M4 Depth of screw 8-10 mm
146,5±1,5
M4
117±1
EC centrifugal,
M4
forward
max. Ø115,3
max. Ø180,5
min. Ø150
Ø133±0,3
4x90°
Ø92
EC-SYSTEMS
Ø9 8
Ø5
Ø1 0
45°
25
0 max. 92
+2
0
45
8
85
179,5 285
Core-end sleeves 129 123
Accessories
5°
Ø3,2
134
0°
6x6
332
2
Ø19
Ø149-1
Technology
136
45 85
0 +2
0
8
Contacts
471
Inlet nozzle Guard grille Electr. connection
p. 552 p. 554 p. 603
EC centrifugal fan and blowers
single inlet, Ø 180
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A Pa °C p. 605
*3G 180 M3G 084-DF A 1~ 100-130 50/60 1970 335 3.90 200 -25 to +60 K1)
subject to alterations (1) Nominal data in operating point with maximum load and 115 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
A 1 — — — — —
[Pa]
2,5 [in H O]
2
A
A 2 1970 335 3.90 76 52
A 3 2100 265 3.15 72 62
600
A 4 2205 195 2.35 70 56
A 5 — — — — —
4
2,0
12
11 2
200
6
0,5
10
100
472
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Alarm relay
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 61800-5-1, CE
– Approvals: UL, CSA; CCC, GOST are applied for
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Centrifugal blower
Centrifugal fan kg without flange kg
130±1 45°
47,7 117±1 M6
EC centrifugal,
forward
Ø150 ±0,25
4x90°
Ø178
Ø100
Ø102
Ø149
Ø180
EC-SYSTEMS
85
+2
0 92
0 Ø164 ±0,35
8 60
5°
0°
6x6
332
Ø149 -1
Technology
2
Ø19
60
0
+2
0
136
85
8
Contacts
473
Inlet nozzle Guard grille Electr. connection
p. 552 p. 554 p. 605
EC centrifugal fan and blowers
single inlet, Ø 180
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A Pa °C p. 605
*3G 180 M3G 084-FA A 1~ 200-277 50/60 2450 510 3.15 300 -25 to +60 K1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
A 1 — — — — —
[Pa]
[in H O]
A
2
4
A 7 2000 185 1.20 68 58
A 8 2000 100 0.60 64 45
2,5
A 11 1400 65 0.40 59 58
A 12 1400 35 0.20 55 45
400 8
1,5
2
1,0
200 6
12 11
0,5
10
9 5
0 250 500 750 [CFM]
474
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Alarm relay
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 61800-5-1, CE
– Approvals: UL, CSA; CCC, GOST are applied for
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Centrifugal blower
Centrifugal fan kg without flange kg
145±1 45°
47,7 117±1 M6
EC centrifugal,
forward
Ø150 ±0,25
4x90°
Ø178
Ø100
Ø102
Ø149
Ø180
EC-SYSTEMS
85
+2
0 92
0 Ø164 ±0,35
8 60
5°
0°
6x6
332
Ø149 -1
Technology
2
Ø19
60
0
+2
0
136
85
8
Contacts
475
Inlet nozzle Guard grille Electr. connection
p. 552 p. 554 p. 605
EC centrifugal fan and blowers
single inlet, Ø 200
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A Pa °C p. 605
*3G 200 M3G 084-FA A 1~ 100-130 50/60 1720 350 4.20 150 -25 to +60 K1)
subject to alterations (1) Nominal data in operating point with maximum load and 115 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
A 1 — — — — —
[Pa]
[in H O]
A
2
600
A 4 1945 152 2.10 69 50
2,0
500
4
1,6
400
3
1,2
300
0,8
200
2
0,4
100
476
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Alarm relay
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 61800-5-1, CE
– Approvals: UL, CSA, CCC, GOST are applied for
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Centrifugal blower
Centrifugal fan kg without flange kg
145±1 45°
47,7 134±1 M6
EC centrifugal,
forward
Ø150 ±0,25
4x90°
Ø178
Ø100
Ø102
Ø176
Ø202
EC-SYSTEMS
85
+2
0 102
Ø164 ±0,35
8 600
5°
°
60
6x
371
Technology
Ø175 -1
3
Ø21
60
0
+2
0
152
85
8
Contacts
477
Inlet nozzle Electr. connection
p. 552 p. 605
EC centrifugal fan and blowers
single inlet, Ø 200
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A Pa °C p. 605
*3G 200 M3G 084-FA A 1~ 200-277 50/60 1890 510 3.10 150 -25 to +60 K1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
A 1 — — — — —
[Pa]
[in H O]
A
2
600
A 4 2050 322 2.00 73 58
A 5 1800 510 3.10 77 —
4
2,0
400
8 A 9 1400 240 1.50 71 —
3
A 10 1400 200 1.20 68 46
7 A 11 1400 145 0.90 65 57
1,2
300
A 12 1400 103 0.70 63 58
12 A 13 1000 87 0.60 63 —
0,8
200
11 A 14 1000 72 0.50 60 46
2 A 15 1000 55 0.40 57 57
6
16 A 16 1000 38 0.30 53 58
0,4
100 15
10
14
13 9 5
0 250 500 750 [CFM]
478
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Alarm relay
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 61800-5-1, CE
– Approvals: UL, CSA; CCC, GOST are applied for
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Centrifugal blower
Centrifugal fan kg without flange kg
145±1 45°
47,7 134±1 M6
EC centrifugal,
forward
Ø150 ±0,25
4x90°
Ø178
Ø100
Ø102
Ø176
Ø202
EC-SYSTEMS
85
+2
0 102
Ø164 ±0,35
8 600
5°
°
60
6x
371
Technology
Ø175 -1
3
Ø21
60
0
+2
0
152
85
8
Contacts
479
Inlet nozzle Electr. connection
p. 552 p. 605
EC centrifugal fan and blowers
single inlet, Ø 225
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A Pa °C p. 605
*3G 225 M3G 084-FA A 1~ 100-130 50/60 1500 350 4.30 150 -25 to +60 K1)
subject to alterations (1) Nominal data in operating point with maximum load and 115 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
A 1 — — — — —
[Pa]
[in H O]
A
2
600
A 4 1775 205 2.70 68 56
2,0
500
4
1,6
400
3
1,2
300
0,8
200
2
0,4
100
480
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Alarm relay
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 61800-5-1, CE
– Approvals: UL, CSA, CCC, GOST are applied for
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Centrifugal blower
Centrifugal fan kg without flange kg
145 ±1 45°
47,7 134 ±1 M6
EC centrifugal,
forward
Ø150±0,25
4x90°
Ø178
Ø100
Ø102
Ø195
Ø225
EC-SYSTEMS
85
0
+2 102 Ø164 ±0,35
8 600
318
Core-end sleeves 208 148
142,5 136
Accessories
Ø3,2
146
5°
0°
6x6
371
Technology
Ø194 -1
2
Ø24
60
0
+2
0
152
85
8
Contacts
481
Inlet nozzle Electr. connection
p. 552 p. 605
EC centrifugal fan and blowers
single inlet, Ø 225
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A Pa °C p. 605
*3G 225 M3G 084-FA A 1~ 200-277 50/60 1815 545 3.50 300 -25 to +60 K1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
A 1 — — — — —
[Pa]
[in H O]
A
2
600
A 4 1995 363 2.35 73 59
A 5 1610 592 3.85 76 —
2,0
400 8
A 9 1300 312 2.05 72 —
7
A 10 1300 200 1.30 66 53
2 A 11 1300 146 0.95 63 60
1,2
300
12
A 12 1300 101 0.65 61 59
6
11 A 13 1000 142 0.95 65 —
0,8
100 14
13 9 5
0 250 500 750 1000 [CFM]
482
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Alarm relay
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 61800-5-1, CE
– Approvals: UL, CSA, CCC, GOST are applied for
centrifugal blower
EC centrifugal,
centrifugal fan
backward
Mass of
Mass of
Centrifugal blower
Centrifugal fan kg without flange kg
145 ±1 45°
47,7 134 ±1 M6
EC centrifugal,
forward
Ø150±0,25
4x90°
Ø178
Ø100
Ø102
Ø195
Ø225
EC-SYSTEMS
85
0
+2 102 Ø164 ±0,35
8 600
318
Core-end sleeves 208 148
142,5 136
Accessories
Ø3,2
146
5°
0°
6x6
371
Technology
Ø194 -1
2
Ø24
60
0
+2
0
152
85
8
Contacts
483
Inlet nozzle Electr. connection
p. 552 p. 605
EC centrifugal fan
single inlet, Ø 250
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A Pa °C p. 605
R3G 250 M3G 084-FA A 1~ 200-277 50/60 1230 450 2.90 180 -25 to +45 K1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
— — — — —
[Pa]
[in H O]
A 1
A
2
350 A 5 — — — — —
3
8 A 6 1160 357 2.30 71 50
1,2
250 A 9 — — — — —
A 10 900 166 1.10 64 50
0,8
150 A 13 — — — — —
A 14 600 54 0.40 53 50
630 37 0.30 48 60
0,4
100 10
A 15
16
A 16 640 31 0.20 46 56
15
0,2
50
14
484
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Alarm relay
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 61800-5-1, CE
– Approvals: UL, CSA, GOST; CCC is applied for
EC centrifugal,
centrifugal fan
backward
Mass of
EC centrifugal,
M6
7
6,5
forward
Ø150±0,25
4x90˚
Ø178
Ø100
Ø240
Ø193
Ø300
EC-SYSTEMS
Z
600+20
4
18 163±1 Ø275
85
1
6x60˚
5±
Accessories
8
View Z Ø2 Depth of screw 8-10 mm
Ø7 Core-end sleeves
Scroll housing used:
150
287
203
267
Technology
247 30˚ 65
˚
˚
30
18
138
30˚
25˚
230 147
30˚
30˚
213 158
˚
30
30
30˚ 30˚
˚
198
184
170
Contacts
485
Inlet nozzle Electr. connection
p. 552 p. 605
EC centrifugal fan
single inlet, Ø 250
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A Pa °C p. 607
R3G 250 M3G 112-EA A 1~ 200-277 50/60 1320 0.76 3.30 0 -25 to +60 L1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves [rpm] [kW] [A] [dB(A)] [%]
[in H O]
A 1
A
2
350
A 4 1450 0.39 1.70 73 53
A 5 1190 0.55 2.40 78 —
1,2
300
A 6 1220 0.43 1.90 75 46
8
3
A 7 1250 0.36 1.60 73 50
1,0
150 12
100
A 15 620 0.06 0.30 53 50
10 A 16 630 0.05 0.30 49 53
16
0,2
50 15
14
13 9 5 1
0 250 500 750 1000 1250 [CFM]
486
information
General
– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage detection
AC centrifugal,
• PFC (active) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation
backward
• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Electronics / motor overtemperature protection
• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked-rotor protection
• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start
– EMC: Interference emission acc. to EN 61000-6-4 (industrial environment)
Interference immunity acc. to EN 61000-6-2 (industrial environment)
Harmonics acc. to DIN EN 61000-3-2/3
AC centrifugal,
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
forward
– Connection leads: Via terminal strip
– Protection class: I (acc. to EN 610800-5-1)
– Product conforming to standard: CE
– Approvals: UL, CSA, GOST, CCC are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
EC centrifugal,
M6 5x
72
forward
˚
˚
60
6x
Ø240
Ø193
Ø300
EC-SYSTEMS
Z
4 Ø168±0,5
22±1 163±1 Ø186±0,5 Ø285±1
Housing width Ø300
Cable gland
±1
85
Accessories
Ø2
6x60˚
203
267
Technology
247 30˚ 65
˚
˚
30
18
138
30˚
25˚
230 147
30˚
30˚
213 158
˚
30
30
30˚ 30˚
˚
198
184
170
Contacts
487
Inlet nozzle Electr. connection
p. 552 p. 607
EC centrifugal fan
single inlet, Ø 280
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A Pa °C p. 607
R3G 280 M3G 112-GA A 1~ 200-277 50/60 1130 0.75 3.30 0 -25 to +50 L1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves [rpm] [kW] [A] [dB(A)] [%]
[in H O]
A 1
A
2
100 A 16
16 10
15
14
13 9 5 1
0 500 1000 1500 [CFM]
488
information
General
– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage detection
AC centrifugal,
• PFC (active) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation
backward
• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Electronics / motor overtemperature protection
• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked-rotor protection
• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start
– EMC: Interference emission acc. to EN 61000-6-4 (industrial environment)
Interference immunity acc. to EN 61000-6-2 (industrial environment)
Harmonics acc. to DIN EN 61000-3-2/3
AC centrifugal,
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
forward
– Connection leads: Via terminal strip
– Protection class: I (acc. to EN 610800-5-1)
– Product conforming to standard: CE
– Approvals: VDE, UL, CSA, GOST, CCC are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
EC centrifugal,
M6 5x
72
forward
˚
˚
60
6x
Ø280
Ø296
Ø228
Ø336
EC-SYSTEMS
Z
5 Ø168±0,5
22±1 183±1 Ø186±0,5 Ø315±1
Housing width Ø336
Cable gland
1
5±
1
Accessories
Ø3
6x60˚
205
254
Technology
236 30˚ 65
˚
˚
30
13
162
30˚
25˚
218 152
30˚
30˚
200 148
˚
30
30
30˚ 30˚
˚
183
172
161
Contacts
489
Inlet nozzle Electr. connection
p. 552 p. 607
EC centrifugal fan
single inlet, Ø 280
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A Pa °C p. 607
R3G 280 M3G 112-GA A 3~ 380-480 50/60 1300 1.10 2.00 0 -25 to +50 L2)
subject to alterations (1) Nominal data in operating point with maximum load and 400 VAC
n P1 I LpA tL
Curves [rpm] [kW] [A] [dB(A)] [%]
[in H O]
A 1
A
2
700
A 5 1200 0.87 1.60 79 —
4 A 6 1260 0.73 1.40 76 55
2,4
200 11
6 A 15 680 0.11 0.30 58 59
A 16 710 0.08 0.20 53 57
16 10
0,4
100 15
14
13 9 5 1
0 500 1000 1500 [CFM]
490
information
General
– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection
AC centrifugal,
• PFC (passive) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation
backward
• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Electronics / motor overtemperature protection
• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked-rotor protection
• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
AC centrifugal,
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
forward
– Connection leads: Via terminal strip
– Protection class: I (acc. to EN 610800-5-1)
– Product conforming to standard: CE
– Approvals: VDE, UL, CSA, GOST, CCC are applied for
EC centrifugal,
centrifugal fan
backward
Mass of
EC centrifugal,
M6 5x
72
forward
˚
˚
60
6x
Ø280
Ø296
Ø228
Ø336
EC-SYSTEMS
Z
5 Ø168±0,5
22±1 183±1 Ø186±0,5 Ø315±1
Housing width Ø336
Cable gland
1
5±
1
Accessories
Ø3
6x60˚
205
254
Technology
236 30˚ 65
˚
˚
30
13
162
30˚
25˚
218 152
30˚
30˚
200 148
˚
30
30
30˚ 30˚
˚
183
172
161
Contacts
491
Inlet nozzle Electr. connection
p. 552 p. 607
EC centrifugal fan
single inlet, Ø 310
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A Pa °C p. 608
R3G 310 M3G 150-FF A 3~ 380-480 50/60 1500 2.97 4.60 200 -25 to +45 M)
subject to alterations (1) Nominal data in operating point with maximum load and 400 VAC
n P1 I LpA tL
Curves [rpm] [kW] [A] [dB(A)] [%]
— — — — —
[Pa]
[in H O]
A 1
A
2
800
A 5 — — — — —
8
A 6 1350 2.19 3.30 85 47
2,8
700
A 7 1440 1.71 2.60 82 57
A 8 1540 0.96 1.60 79 56
2,4
600 3
A 9 — — — — —
2,0
300 11
A 14 730 0.37 0.90 69 47
A 15 750 0.27 0.70 65 57
200
0,8
2
16
6
A 16 780 0.16 0.50 60 56
15
0,4
100 10
14
492
information
General
– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection
AC centrifugal,
• PFC (passive) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation
backward
• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Electronics / motor overtemperature protection
• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked-rotor protection
• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
AC centrifugal,
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
forward
– Connection leads: Via terminal strip
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE, UL, CSA, GOST
EC centrifugal,
centrifugal fan
backward
Mass of
EC centrifugal,
8x
forward
˚
60
45
6x
˚
Ø315
Ø327
Ø257
Ø374
EC-SYSTEMS
Z
4 Ø235-2
Ø252±0,3 Ø350±1
42±1 203±1
Housing width
Ø374
Cable gland
±1
50
Accessories
Ø3
6x60˚
249
325
Technology
303 30˚ 65
˚
˚
30
18
176
30˚
25˚
283 186
30˚
30˚
264 200
˚
30
30
30˚ 30˚
˚
246
229
214
Contacts
493
Inlet nozzle Electr. connection
p. 552 p. 608
EC centrifugal fan
single inlet, Ø 355
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A Pa °C p. 608
R3G 355 M3G 150-FF A 3~ 380-480 50/60 1180 2.60 4.00 300 -25 to +35 M)
subject to alterations (1) Nominal data in operating point with maximum load and 400 VAC
n P1 I LpA tL
Curves [rpm] [kW] [A] [dB(A)] [%]
— — — — —
[Pa]
[in H O]
A 1
A
2
800 4
A 5 — — — — —
700 A 6 1050 1.91 2.90 82 54
2,8
600
A 9 — — — — —
7
2,0
300 11 2
A 14 580 0.31 0.70 65 54
6
A 15 600 0.22 0.60 59 64
0,8
200
A 16 610 0.17 0.50 56 64
16 10
15
0,4
100
14
494
information
General
– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection
AC centrifugal,
• PFC (passive) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation
backward
• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Electronics / motor overtemperature protection
• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked-rotor protection
• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
AC centrifugal,
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
forward
– Connection leads: Via terminal strip
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE, UL, CSA, GOST
EC centrifugal,
centrifugal fan
backward
Mass of
EC centrifugal,
8x
forward
˚
60
45
6x
˚
Ø355
Ø372
Ø289
Ø413
EC-SYSTEMS
Z
5 Ø235-2
Ø252±0,3 Ø390±1
42±1 228±1
Housing width
Ø413
Cable gland
±1
90
Accessories
Ø3
6x60˚
280
362
Technology
338 30˚ 65
˚
˚
30
18
196
30˚
25˚
315 207
30˚
30˚
294 222
˚
30
30
30˚ 30˚
˚
274
256
238
Contacts
495
Inlet nozzle Electr. connection
p. 552 p. 608
EC centrifugal fan
single inlet, Ø 400
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A Pa °C p. 608
R3G 400 M3G 150-IF A 3~ 380-480 50/60 930 2.13 3.30 200 -25 to +45 M)
subject to alterations (1) Nominal data in operating point with maximum load and 400 VAC
n P1 I LpA tL
Curves [rpm] [kW] [A] [dB(A)] [%]
— — — — —
[Pa]
[in H O]
A 1
A
2
600
4 A 4 1040 0.93 1.60 74 61
A 5 — — — — —
2,0
400 3
A 9 — — — — —
8
A 10 700 0.91 1.40 76 54
A 11 700 0.62 1.00 71 63
1,2
300 7
12
A 12 700 0.28 0.50 63 61
A 13 — — — — —
11
0,8
100
14
496
information
General
– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection
AC centrifugal,
• PFC (passive) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation
backward
• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Electronics / motor overtemperature protection
• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked-rotor protection
• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
AC centrifugal,
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
forward
– Connection leads: Via terminal strip
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE, UL, CSA, GOST
EC centrifugal,
centrifugal fan
backward
Mass of
EC centrifugal,
Ø9
8x
forward
45
˚
Ø400
Ø414
Ø325
Ø456
EC-SYSTEMS
Z
4 Ø235-2
Ø252±0,3 Ø430±1
42±1 255±1
Housing width
Ø456
Cable gland
±1
30
Accessories
Ø4
6x60˚
316
408
Technology
380 30˚ 65
˚
˚
30
20
220
30˚
25˚
355 233
30˚
30˚
331 250
˚
30
30
30˚ 30˚
˚
308
288
268
Contacts
497
Inlet nozzle Electr. connection
p. 552 p. 608
EC centrifugal fan
single inlet, Ø 400
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A Pa °C p. 608
R3G 400 M3G 150-NA A 3~ 380-480 50/60 1120 3.080 4.60 300 -25 to +55 M)
subject to alterations (1) Nominal data in operating point with maximum load and 400 VAC
n P1 I LpA tL
Curves [rpm] [kW] [A] [dB(A)] [%]
— — — — —
[Pa]
[in H O]
A 1
A
2
700
A 5 — — — — —
A 6 1000 2.16 3.20 84 49
2,4
500 A 9 — — — — —
A 10 780 1.05 1.70 78 49
7
1,6
300 2 A 13 — — — — —
11 6
A 14 520 0.35 0.80 67 49
530 0.31 0.70 64 57
0,8
200 A 15
16 10
A 16 550 0.19 0.50 57 58
15
0,4
100
14
498
information
General
– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection
AC centrifugal,
• PFC (passive) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation
backward
• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Electronics / motor overtemperature protection
• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked-rotor protection
• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
AC centrifugal,
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
forward
– Connection leads: Via terminal strip
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE, UL, CSA, GOST
EC centrifugal,
centrifugal fan
backward
Mass of
EC centrifugal,
Ø9
8x
forward
45
˚
Ø400
Ø414
Ø325
Ø456
EC-SYSTEMS
Z
4 Ø235-2
Ø252±0,3 Ø430±1
42±1 255±1
Housing width
Ø456
Cable gland
±1
30
Accessories
Ø4
6x60˚
316
408
Technology
380 30˚ 65
˚
˚
30
20
220
30˚
25˚
355 233
30˚
30˚
331 250
˚
30
30
30˚ 30˚
˚
308
288
268
Contacts
499
Inlet nozzle Electr. connection
p. 552 p. 608
EC centrifugal fan
single inlet, Ø 450
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm kW A Pa °C p. 608
R3G 450 M3G 150-NA A 3~ 380-480 50/60 890 2.65 4.50 300 -25 to +50 M)
subject to alterations (1) Nominal data in operating point with maximum load and 400 VAC
n P1 I LpA tL
Curves [rpm] [kW] [A] [dB(A)] [%]
— — — — —
[Pa]
[in H O]
A 1
A
2
700 A 5 — — — — —
A 6 790 1.82 3.20 79 60
4
2,4
500 A 9 — — — — —
8
3
A 10 610 0.83 1.60 71 60
1,6
300 2 A 13 — — — — —
12
6
A 14 410 0.27 0.70 60 60
11 420 0.23 0.60 57 66
0,8
200 A 15
10
A 16 420 0.18 0.50 54 70
16
0,4
100 15
14
500
information
General
– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection
AC centrifugal,
• PFC (passive) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation
backward
• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Electronics / motor overtemperature protection
• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked-rotor protection
• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to DIN EN 61000-3-2/3
AC centrifugal,
– Leakage current: < 3.5 mA acc. to EN 61800-5-1
forward
– Connection leads: Via terminal strip
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE, UL, CSA, GOST
EC centrifugal,
centrifugal fan
backward
Mass of
EC centrifugal,
8x
forward
45
˚
Ø450
Ø459
Ø365
Ø530
EC-SYSTEMS
Z
5 Ø235-2
Ø252±0,3 Ø510±1
42±1 288±1
Housing width
Ø530
Cable gland
±1
10
Accessories
Ø5
6x60˚
355
458
Technology
427 30˚ 65
˚
˚
30
22
247
30˚
25˚
398 262
30˚
30˚
371 281
˚
30
30
30˚ 30˚
˚
346
323
301
Contacts
501
Inlet nozzle Electr. connection
p. 552 p. 608
EC centrifugal blowers
dual inlet, Ø 133
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Nominal data
Type Motor VDC VDC m3/h rpm W A dB(A) Pa °C p. 600
D1G 133 M1G 074-BF A 24 16-28 700 1780 105 5.60 62 50 -25 to +60 G)
D1G 133 M1G 074-BF A 48 36-57 700 1780 105 2.80 62 50 -25 to +60 G)
subject to alterations
n P1 LpA tL
Curves [rpm] [W] [dB(A)] [%]
A 1’ — — — —
[Pa]
[in H O]
A
2
4' A 5 1500 73 59 —
UN UR A 6 1720 67 57 49
300 4
A 7 2020 58 56 41
2230 49 56 37
1,0
A 8
3'
8
200 3
7
0,5
2'
100 2
6
5 1
0 100 200 300 400 [CFM]
502
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Reverse polarity and locked-rotor protection
backward
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
– Cable exit: Variable
– Protection class: I
– Product conforming to standard: EN 60950-1
– Approvals: UL, CSA; A (48 VDC) with CCC
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
backward
Mass of
Centrifugal blower kg
without flange
170,5
EC centrifugal,
215 87
forward
71
65,5
180
Ø112
EC-SYSTEMS
85
6
79
5
14
503
Guard grille Electr. connection
p. 555 p. 600
EC centrifugal blowers
dual inlet, Ø 133
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Nominal data
Type Motor VDC VDC m3/h rpm W A dB(A) Pa °C p. 600
D1G 133 M1G 074-CF A 24 16-28 1020 1580 118 6.00 64 0 -25 to +60 G)
D1G 133 M1G 074-CF A 48 36-57 1020 1580 118 3.00 64 0 -25 to +60 G)
subject to alterations
n P1 LpA tL
Curves [rpm] [W] [dB(A)] [%]
A 1’ 1700 145 65 —
[Pa]
[in H O]
A
2
A 2’ 1930 133 62 38
A 3’ 2290 122 59 41
2,0
500 A 4’ 2700 99 61 32
A 1 1580 118 64 —
A 2 1790 107 61 38
400 A 3 2100 95 57 41
4' UR
1,5
UN
A 4 2410 73 58 32
A 5 1400 78 60 —
300 4 A 6 1580 70 56 38
A 7 1760 56 53 41
1,0
3'
A 8 2000 44 53 32
8 3
200
7
0,5
2'
100 2
6
5 1 1'
0 200 400 600 [CFM]
504
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Reverse polarity and locked-rotor protection
backward
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
– Cable exit: Variable
– Protection class: I
– Product conforming to standard: EN 60950-1
– Approvals: UL, CSA
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
backward
Mass of
Centrifugal blower kg
without flange
max. 204
EC centrifugal,
232 96
forward
104
67,5
max. 214
Ø112
EC-SYSTEMS
85
93,5
6
5
14
505
Guard grille Electr. connection
p. 555 p. 600
EC centrifugal blowers
dual inlet, Ø 146
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Nominal data
Type Motor VDC VDC m3/h rpm W A dB(A) Pa °C p. 600
D1G 146 M1G 074-CF A 24 16-28 1000 1350 105 5.10 61 0 -25 to +60 G)
D1G 146 M1G 074-CF A 48 36-57 1000 1350 105 2.60 61 0 -25 to +60 G)
subject to alterations
n P1 LpA tL
Curves [rpm] [W] [dB(A)] [%]
A 1’ 1460 129 63 —
[Pa]
[in H O]
A
2
A 2’ 1680 119 60 53
A 3’ 1890 111 58 61
A 4’ 2240 95 59 55
400
A 1 1350 105 61 —
1,5
A 2 1570 95 58 53
UR
A 3 1750 88 56 61
4'
300 A 4 2010 70 57 55
A 5 1210 70 56 —
1,0
4
A 6 1360 60 54 53
UN A 7 1460 53 52 61
200 3'
A 8 1670 42 51 55
3
8
0,5
7 2'
100 2
5 1 1'
0 200 400 600 [CFM]
506
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Reverse polarity and locked-rotor protection
backward
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
– Cable exit: Variable
– Protection class: I
– Product conforming to standard: EN 60950-1
– Approvals: UL, CSA
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
backward
Mass of
Centrifugal blower kg
without flange
max. 206
EC centrifugal,
232 96
forward
max. 104,5
69
Ø117-0,5
219
EC-SYSTEMS
85
6
98
5
14
507
Guard grille Electr. connection
p. 555 p. 600
EC centrifugal blowers
dual inlet, Ø 160
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Nominal data
Type Motor VDC VDC m3/h rpm W A dB(A) Pa °C p. 600
D1G 160 M1G 074-CF A 24 16-28 980 1250 112 5.60 60 0 -25 to +60 G)
D1G 160 M1G 074-CF A 48 36-57 980 1250 112 2.90 60 0 -25 to +60 G)
subject to alterations
n P1 LpA tL
Curves [rpm] [W] [dB(A)] [%]
A 1’ 1330 142 63 —
[Pa]
[in H O]
A
2
A 2’ 1520 128 61 64
A 3’ 1790 115 59 66
2,0
4' A 4 1900 80 58 60
UN UR A 5 1100 75 58 —
300 4 A 6 1250 69 56 64
A 7 1420 58 54 66
1,0
3' A 8 1580 47 53 60
200 8 3
7
0,5
2'
100 6
2
5 1 1'
0 200 400 600 [CFM]
508
information
General
– Technical features: • Tach output
AC centrifugal,
• Control input 0-10 VDC / PWM • Reverse polarity and locked-rotor protection
backward
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
– Cable exit: Variable
– Protection class: I
– Product conforming to standard: EN 60950-1
– Approvals: UL, CSA
AC centrifugal,
forward
centrifugal blower
EC centrifugal,
backward
Mass of
Centrifugal blower kg
without flange
max. 226
EC centrifugal,
max. 176,5 102
forward
max. 107
87
max. 242
EC-SYSTEMS
85
5
17
Ø
6
100,5
400 +20
Accessories
Technology
Contacts
509
Guard grille Electr. connection
p. 555 p. 600
EC centrifugal blowers
dual inlet, Ø 146
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A Pa °C p. 603
D3G 146 M3G 074-CF A 1~ 200-277 50/60 1740 171 1.30 0 -25 to +60 J1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
[in H O]
2
A
A 2 1960 169 1.20 65 49
A 3 2150 165 1.20 65 56
A 4 2410 166 1.20 66 55
400
A 5 1460 103 0.70 62 —
1,5
3 A 10 1220 46 0.40 56 41
8
A 11 1330 46 0.40 52 47
200 A 12 1480 46 0.40 53 44
7
2
0,5
12
100 6
11
10
9 5 1
0 100 200 300 400 500 600 [CFM]
510
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Tach output
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE
– Approvals: UL, CSA; CCC, GOST are applied for
centrifugal blower
EC centrifugal,
backward
Mass of
Centrifugal blower kg
without flange
max. 206
96 232
EC centrifugal,
27
forward
max. 104,5
50
Ø5
5
219
350+20
Ø117-0,5
EC-SYSTEMS
98
511
Guard grille Electr. connection
p. 555 p. 603
EC centrifugal blowers
dual inlet, Ø 160
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A Pa °C p. 603
D3G 160 M3G 074-CF A 1~ 200-277 50/60 1390 154 1.20 0 -25 to +60 J1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
[in H O]
2
A
A 2 1440 129 1.00 61 53
A 3 1540 93 0.70 57 60
1,0
A 4 1590 63 0.50 56 47
240
A 5 1180 96 0.70 59 —
4
A 6 1220 79 0.60 56 52
200 A 7 1270 54 0.40 52 57
0,75
A 8 1310 37 0.30 51 44
3
160
A 9 860 40 0.30 51 —
8
A 10 890 34 0.30 47 45
A 11 910 24 0.20 43 45
0,5
80 2
12
0,25
11
6
40
10
9 5 1
0 100 200 300 400 500 600 [CFM]
512
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Tach output
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE
– Approvals: UL, CSA; CCC, GOST are applied for
centrifugal blower
EC centrifugal,
backward
Mass of
Centrifugal blower kg
without flange
max. 226
102 232
EC centrifugal,
forward
max. 107
241
450+20
Ø130±0,5
EC-SYSTEMS
100,5
513
Guard grille Electr. connection
p. 555 p. 603
EC centrifugal blowers
dual inlet, Ø 180
Electr. connection
voltage range
Max. current
Max. power
Speed/rpm
Frequency
Nominal
draw (1)
input (1)
Curve
Nominal data
Type Motor VAC Hz rpm W A Pa °C p. 603
D3G 180 M3G 074-CF A 1~ 200-277 50/60 1090 165 1.22 0 -25 to +60 J1)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n P1 I LpA tL
Curves [rpm] [W] [A] [dB(A)] [%]
[in H O]
2
A
A 2 1200 155 1.15 62 54
A 3 1310 113 0.85 59 62
1,00
A 8 1145 45 0.35 51 48
3
A 9 690 43 0.35 52 —
150 A 10 760 42 0.30 50 47
8
A 11 805 31 0.25 46 51
0,50
A 12 840 21 0.20 43 39
7
100 A 13 455 15 0.15 40 —
A 14 500 15 0.15 38 36
12
2 A 15 525 12 0.10 34 35
0,25
11
50 6
A 16 545 9 0.10 32 23
16
15 10
14
13 9 5 1
0 250 500 750 [CFM]
400 800 1200 1600 [m3/h]
514
information
General
– Technical features: • Output 10 VDC max. 1.1 mA
AC centrifugal,
• PFC (passive) • Tach output
backward
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-1
Harmonics acc. to DIN EN 61000-3-2/3
– Leakage current: < 3.5 mA acc. to EN 60950-1
– Cable exit: Variable
AC centrifugal,
– Protection class: I
forward
– Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE
– Approvals: UL, CSA; CCC, GOST are applied for
centrifugal blower
EC centrifugal,
backward
Mass of
Centrifugal blower kg
without flange
309
296 255
133 180
EC centrifugal,
7
forward
289
5˚
188
168
6x 134
90
60
˚
EC-SYSTEMS
333
3,2
Ø 149
1 92
136
600
Accessories
Core-end sleeves
255
Technology
Contacts
515
Guard grille Electr. connection
p. 555 p. 603
516
information
General
EC-SYSTEMS
Options 518
AC centrifugal,
backward
Switch power supplies 522
Accessories: Temperature sensor / control module, pressure control, selection module, interface converter, ... 528
AC centrifugal,
forward
HMS controller 546
EC centrifugal,
backward
ward for clean rooms
EC centrifugal, back-
EC centrifugal,
forward
EC-SYSTEMS
Accessories
Technology
Contacts
517
EC-SYSTEMS
Options
EC fan
EC fans 24 / 48 VDC
PWM and Lin 0-10 VDC
with integrated commutation electronics
PC with interface
converter (RS485) RS485 / ebmBUS
PC with interface
converter (RS485)
Tach output
Alarm
518
information
General
EC fan with integrated electronics
EC fans (motor size 055)
AC centrifugal,
with integrated commutation electronics
backward
1~ 115 VAC or 230 VAC
50/60 Hz mains operation
AC centrifugal,
50/60 Hz mains operation
forward
PC with interface
converter (RS485)
EC centrifugal,
backward
Supply for potentiometer 10 V
Tach output
Slave output
EC centrifugal,
Mains operation, 50 / 60 Hz
forward
PC with interface
converter (RS485)
EC-SYSTEMS
Control input 0-10 VDC / PWM
Actual value input 0-10 VDC
Alarm
Accessories
Slave output
Technology
Contacts
519
EC-SYSTEMS
Options
Mains operation, 50 / 60 Hz
PC with interface
converter (RS485)
Mains operation, 50 / 60 Hz
PC with interface
converter (RS485)
Alarm
Slave output
520
information
General
Customer PC with LISA Interface converter Electronics EC fan
EC-SYSTEMS:
AC centrifugal,
5.1 control software and repeater Networked EC fans with interface
backward
converter and repeater
Control software
part no.
25711-2-0199
integrated electronics
Interface converter
part no. 21487-1-0174
AC centrifugal,
forward
max. 31
Features of control addresses
software LISA 5.1
Power supply 150 W
– Individual control
and monitoring of Repeater
max. 7,905 fans part no.
EC centrifugal,
25708-1-0174
backward
– Group-oriented
arrangement of the fans
– Level 1: Overview
display for 10 floors
max. 31
– Level 2: Overview addresses
display for 255 groups
integrated electronics
EC centrifugal,
integrated electronics
forward
Repeater
max. 31
addresses
EC-SYSTEMS
Accessories
Technology
Contacts
521
Switch power supply with PFC, basic version
48 VDC, 150 W / 300 W
– General remarks: Switch power supply with an output power of 150 W / 300 W to supply
48 VDC EC motors from the 115 / 230 VAC mains. It is also possible to run several motors
up to an overall power of 150 W / 300 W. Data on the 60 W switching power supply is
available on request.
– Function: Supply of an electrically insulated direct voltage of 48 VDC at the output when
connected to the 115 / 230 V mains. The power supply is sustainably short-circuit proof,
open-circuit proof and protected against overheating. An integrated EMC filter guarantees
RFI suppression of the unit according to EN 61000-3-2.
– Material: Housing made of stainless steel
– Protection class: I
– Type of protection: IP 20 (acc. to EN 60529)
Output voltage
Frequency
P1 max.
Output
Mass
Nominal data Dimensions
Type VAC Hz VDC W A kg a b c d e f
CNW015-AB06 -01 1~ 115 50/60 48 150 3.10 0.7 187 176 167 50 110 1
CNW015-AB02 -01 1~ 230 50/60 48 150 3.10 0.7 187 176 167 50 110 1
CNW030-AC06 -01 1~ 100-120 50/60 48 300 6.25 1.3 272 260 251 66 112 2
CNW030-AC02 -01 1~ 200-277 50/60 48 300 6.25 1.3 272 260 251 66 112 2
subject to alterations
5
a
c
b
80
10
108
522
Line side
V L
N
PE
red
Motor side
blue
V
red
+48 GND +48 GND
blue
Blower 1
exhaust air
Blower 2
exhaust air
523
Contacts Technology Accessories EC-SYSTEMS EC centrifugal, EC centrifugal, back- EC centrifugal, AC centrifugal, AC centrifugal, General
forward ward for clean rooms backward forward backward information
Switch power supply with PFC, RS485 and ebmBUS
48 VDC, 150 W / 300 W
– General remarks: Switch power supply with an output power of 150 W / 300 W to supply
48 VDC EC motors from the 115 / 230 VAC mains. It is also possible to run several motors
up to an overall power of 150 W / 300 W. Data on the 60 W switching power supply is
available on request.
– Function: Supply of an electrically insulated direct voltage of 48 VDC at the output when
connected to the 115 / 230 V mains. The power supply is sustainably short-circuit proof,
open-circuit proof and protected against overheating. An integrated EMC filter guarantees
RFI suppression of the unit according to EN 61000-3-2.
– Material: Housing made of stainless steel
– Protection class: I
– Type of protection: IP 20 (acc. to EN 60529)
Output voltage
Frequency
P1 max.
Output
Mass
Nominal data Dimensions
Type VAC Hz VDC W A kg a b c d e f
CNW015-AB06 -05 1~ 115 50/60 48 150 3.10 0.7 187 176 167 50 110 1
CNW015-AB02 -05 1~ 230 50/60 48 150 3.10 0.7 187 176 167 50 110 1
CNW030-AC06 -05 1~ 100-120 50/60 48 300 6.25 1.3 272 260 251 66 112 2
CNW030-AC02 -05 1~ 200-277 50/60 48 300 6.25 1.3 272 260 251 66 112 2
subject to alterations
80
10
108
524
Line side
V L
N
PE
red
Motor side
blue
V
+48 GND +48 GND
power supply
To next switch
~
RS232
RS485
Interface converter
white
Tach PWM
yellow
RS485
2 x RJ45:
PIN 6 - RS A
PIN 5 - RS B
RS485
Blower
525
Contacts Technology Accessories EC-SYSTEMS EC centrifugal, EC centrifugal, back- EC centrifugal, AC centrifugal, AC centrifugal, General
forward ward for clean rooms backward forward backward information
External commutation electronics
for rail technology, 110 VDC, 650 W
– General remarks: For EC motors / fans with three cores and without integrated
commutation electronics
– Function: Commutation unit for three-core ebm EC motors up to a power input of 650 W.
Various basic functions are integrated: open loop speed control, closed loop speed control,
even an RS485 interface. In combination with sensors, all control tasks as required in air
technology can be executed.
– Protection class: I
– Type of protection: IP 20 (acc. to DIN EN 60529)
– NB: Connected fans have to be designed for rated voltage of 127 VDC!
Current draw
Power input
P1 max.
Mass
Nominal data
Type VDC W A °C kg
phase to earth
• 0-10 V input (Ri: 100 k)
190 • 0-10 V input (Ri: 100 k) for connection of external actual value input
• RS485 interface (ebmBUS)
• Floating alarm contact 250 VAC / 5A, during alarm, relay is released (low-active)
• Wide voltage input for external controller enabling via RESET function
• Tach output
1,5
179,5
• LED for operation and alarm mode
green: unit on
red: alarm
63
KL1 2-pole connector; centreline 7.5; Co. Wago part no.: 231-202/026-000
KL2A 6-pole connector; centreline 5; Co. Wago part no.: 231-106/026-000
KL2B 6-pole connector; centreline 5; Co. Wago part no.: 231-106/026-000
1,5
40
526
information
General
AC centrifugal,
backward
AC centrifugal,
forward
KL2B KL3B KL5B
PE1 PE2
+18 Sensor
GND
+10 0-10
GND NC COM H+ TW
H+ PTC H- H-
V 1 V V
RS RS RS RS An EN EN
EC centrifugal,
+ - A B A B
GND NO COM
+ - H1 H2 H3 U V W
backward
Tacho
EC centrifugal,
KL1 + 110 VDC KL3B NC Relay contact for alarm, break for failure
- 110 VDC COM Relay contact for alarm
forward
KL2A RS A Interface connection RS A KL4 EN + Enable input via RESET function
RS B Interface connection RS B EN - Enable input via RESET function
RS A Interface connection RS A KL5A H1 Hall-sensor 1
RS B Interface connection RS B H2 Hall-sensor 2
An, Tacho Tach output, open collector H3 Hall-sensor 3
GND Reference KL2 (for KL2 only) Shielding connection
EC-SYSTEMS
KL2B +18 V +18 V (non-stabilised, +20 %, 20 mA) to supply Shielding connection
external sensors KL5B H+ Power supply for hall-sensors (+)
Sensor 1 Input for external sensor, Ri = 100 k H+ Power supply for hall-sensors (+)
GND Reference KL2 (for KL2 only) TW / PTC Thermal switch or PTC connection
+10 V +10 V (stabilised +/- 3 %, 25 mA) H- Power supply for hall-sensors (-)
0-10 V Input for set value 0 - 10 V, Ri = 100 k H- Power supply for hall-sensors (-)
GND Reference KL2 (for KL2 only) KL6 U Motor winding U
V Motor winding V
Accessories
W Motor winding W
Technology
Contacts
527
Temperature sensor
Output impedance
measuring range
Nominal voltage
Output voltage
Output current
Current draw
Temperature
Mass
Nominal data
Part no. VDC mA VDC mA k °C kg
3 +0,2
Ø7 +0,5
– Electr. connection:
1±0,1
Ø3,5
2,5
Ø4,9
3,3
red
8
15-30 VDC
84,7 yellow
0-10 VDC
45
output
37,5
6,5
13
5
6,9
38,5
450 +20
Temperature sensor
0
-20 80 Temp. °C
Tolerance ±3 K
528
information
General
Temperature control module
AC centrifugal,
backward
AC centrifugal,
forward
Output impedance
EC centrifugal,
Nominal voltage
Output voltage
Output current
backward
control range
Current draw
Temperature
Mass
Nominal data
Part no. VDC mA VDC mA k °C kg
3 +0,2
Ø7 +0,5
– Electr. connection:
1±0,1
Ø3,5
2,5
Ø4,9
3,3
red red
8
EC centrifugal,
18-60 VDC Maximum ripple
± 3.5 %
forward
84,7 yellow yellow
2-10 VDC Control input 47 K
45
or 0-10 VDC 0 - 10 VDC
37,5 output Counter
Isink max.
47 K
6,5 10 mA
Controller
white
Tach output, 680
13
5
EC-SYSTEMS
450 +20
47 V
Output (yellow) Core-end sleeve
+ (red) blue blue
– (blue) GND
6
85
2
1
0 30 55 Temp. °C 0 6 10 45 Temp. °C
50002-1-0174 50003-1-0174
Tolerance ±3 K
Contacts
529
Pressure control with integrated pressure sensor
Pressure control
voltage range
alternative
Frequency
Nominal
range
Nominal data
Type VAC Hz VDC Pa °C
167
89,5
35,5
162
1,5
10,5
195
180±0,4
95±0,2
125
115
Ø 5,5
7,5
530
information
General
AC centrifugal,
Fan
backward
Set value
potentiometer Selector switch
Day Linear
Night
Mains Alarm
AC centrifugal,
forward
20 V IN
0-10 V
+10 V
Night
PWM
COM
COM
Tach
GND
GND
GND
GND
GND
OUT
Day
NC
NC
PE
PE
N
N
L
EC centrifugal,
ST1 ST2 ST7 ST8 ST3 ST4
backward
Control terminals Line terminals
EC centrifugal,
N Mains 50/60 Hz, neutral GND GND
ST2 PE Protective earth ST4 Tach Tach output from fan
forward
L Mains 50/60 Hz, phase OUT Control voltage for fan, 0-10 V
N Mains 50/60 Hz, neutral GND GND
ST7 NC Relay contact for alarm, break for failure +10 V Set value potentiometer,
COM Relay contact for alarm supply 10 V (-10 %), 10 mA
ST8 NC Relay contact for alarm, break for failure 0-10 V PWM Set value potentiometer
COM Relay contact for alarm GND Set value potentiometer
EC-SYSTEMS
Day Selector switch terminal
GND Selector switch terminal
Night Selector switch terminal
GND Selector switch terminal
Accessories
Technology
Contacts
531
Selection module for 3 speeds
– General remarks: Using an external selector switch, one of three preset speeds
can be chosen. Presetting is done via one integrated potentiometer each.
– Material: Plastics
– Type of protection: IP 20
Type
50
24
90
532
– Electr.
connection:
Selector switch
Day
Party
Night
+10 V
fan
red
blue
Connection
Connection
yellow
selector switch
GND
+10 V
0-10 V output
Fan
533
Contacts Technology Accessories EC-SYSTEMS EC centrifugal, EC centrifugal, back- EC centrifugal, AC centrifugal, AC centrifugal, General
forward ward for clean rooms backward forward backward information
Interface converter RS232 - RS485
no-load operation
Nominal voltage
Current draw at
Supply voltage
Nominal data
Part no. VAC VAC / VDC mA kg
RS232 RS485 – Mode of operation: RS485 2-wire mode with echo and automatic control
– Galvanic insulation: Min. 1kV insulation voltage between RS232 and RS485 interfaces and
22
75
534
information
General
Interface converter RS232 - RS485
AC centrifugal,
RS232 devices (laptop / PDA) with ebmBUS devices (electronic commutation units with
backward
RS485 interface) Power supplied by RS232 of the laptop / PDA.
– Material: Plastic housing
– Status display: Via LEDs
PWR: Power supply
TXD: Data transfer (send)
RXD: Data transfer (receive)
AC centrifugal,
forward
EC centrifugal,
backward
Mass
Nominal data
Part no. kg
– Mode of operation: RS485 2-wire mode with echo and automatic control
TX+ TX- GND RX+ RX-
19
EC centrifugal,
forward
RS422
RS485
74
RXD
TXD
PWR
EC-SYSTEMS
37
Accessories
Technology
Contacts
535
RS485 repeater
– General remarks: The physical RS485 repeater is used for the connection of two segments
on an RS485 basis. It can split a segment with network bus wires that are too long, or with
too many nodes into two smaller, standardised units. A maximum of 31 nodes can be
connected to the repeater.
– Installation: The repeater housing is mounted on the wall or in the cable duct with two
screws (Ø 4 mm) or with cable ties.
– Material: Housing made of galvanised sheet steel
– Type of protection: IP 20 according to DIN EN 60529
Power input
Frequency
Mass
Nominal data
Part no. VAC Hz VA °C °C kg
Bus2
Bus2
Bus1
8765432 1 8765432 1
GST 18/3
12 3 4 5 6 7 8 12 3 4 5 6 7 8
200
190
LED
3
30
Ø4
.3
Supply connection
536
information
General
RS485 terminal box with lead connections
for centrifugal fans with EC motor size 084 (ebmBUS, RS485)
AC centrifugal,
• 2x RJ45 socket for ebmBUS
backward
• ebmBUS lead with Molex Mini-Fit female connector to connect to motor
• 3-pole 4-pin unit connector with AMP Mate-N-Lock female connector to
connect to motor
• Mode of operation display (LED2 green) and alarm display (LED1 red)
– Delivery scope:
• Terminal box
AC centrifugal,
• Supply line (800 mm)
forward
• ebmBUS line (800 mm)
– Material: ABS (fire rating V0 according to UL)
EC centrifugal,
backward
Part no.
green/yellow PE
EC centrifugal,
black 2 N
57
black 1 L
forward
61.6 73
45.4 61 – Pin configuration of ebmBUS lead:
Colour Assignment / function
yellow RS A
white RS B
111
87
99
EC-SYSTEMS
red Operation: +15 V Alarm: 0V
blue Operation: 0 V Alarm: +15 V
99
Technology
4
61
Contacts
537
Hand-held control terminal
– General remarks: Terminal to control networked fans and to set their parameters;
RS485 (ebmBUS)
– Type of protection: IP 20 (acc. to DIN EN 60529)
– Protection class: III
– Display: Plain text LCD, 2x8 characters
– Accumulator and charging electronics: 2 x round cell R6 DIN 40863 NiMH 1,500 mAh,
operating time approx. 40 hrs, standby time approx. 100 days, charging time max. 4 hrs.
– Parts included in delivery: Hand-held control terminal, power supply and accumulator
unit, BUS cable, 2 x round cell R6 NiMH 1,500 mAh
Supply voltage
Frequency
Mass
Nominal data
Type VAC Hz VDC °C °C kg
68 44
95
538
539
Contacts Technology Accessories EC-SYSTEMS EC centrifugal, EC centrifugal, back- EC centrifugal, AC centrifugal, AC centrifugal, General
forward ward for clean rooms backward forward backward information
Speed setting
with housing
Resistance
Mass
Nominal data
Type VDC mA k °C kg
• A single controller can be used to control multiple fans with the same speed setting.
• The connection to the controller is made using four screw connections or one Molex
connection (adaptor lead available).
• If the tach cable is required, this device can only be connected to a fan. Note that in rare
operating cases, it is possible that permanent connection of the tach cable can cause a
26
50
25
50
+ meter connection
– meter connection
540
– Electr.
connection:
red
Fan 2 yellow
blue
white
red
yellow
Fan 1
blue
white
yellow
red
white
blue
GND
Tacho
+10 V
Control
Tacho
GND
Control
+10 V
541
Contacts Technology Accessories EC-SYSTEMS EC centrifugal, EC centrifugal, back- EC centrifugal, AC centrifugal, AC centrifugal, General
forward ward for clean rooms backward forward backward information
Speed setting
without housing
– Design: The speed setting can be operated with the entire range of ebm-papst EC fans.
It is supplied with current via the fan's DC output and supplies a 0-10 V signal that allows
infinitely variable open loop speed control. The control also permits fan speed measurement
using a multimeter equipped with a frequency meter (for which a tach output is given from
the fan).
– Mounting hole: 10 mm
Resistance
Mass
Nominal data
Type VDC mA k °C kg
• A single controller can be used to control multiple fans with the same speed setting.
• The connection to the controller is made using four screw connections or one Molex
connection (adaptor lead available).
• If the tach cable is required, this device can only be connected to a fan. Note that in rare
operating cases, it is possible that permanent connection of the tach cable can cause a
50
12
+ meter connection
– meter connection
542
– Electr.
connection:
red
Fan 2 yellow
blue
white
red
yellow
Fan 1
blue
white
yellow
red
white
blue
GND
Tacho
+10 V
Control
Tacho
GND
Control
+10 V
543
Contacts Technology Accessories EC-SYSTEMS EC centrifugal, EC centrifugal, back- EC centrifugal, AC centrifugal, AC centrifugal, General
forward ward for clean rooms backward forward backward information
LISA
Control software for EC-SYSTEMS
Part no.
25711-2-0199
subject to alterations
544
information
General
Fan Control
Control software & accessories for Pocket PCs / PDAs
AC centrifugal,
– Features:
backward
• Managing up to 31 fans
• Setting pre-set values and indicating actual values
• Setting parameters for PID control
• Setting fan address
• Setting mode of operation (heating/cooling)
• Alarm diagnosis
AC centrifugal,
• Language selection for user interface
forward
EC centrifugal,
backward
Part no.
EC centrifugal,
and serial communication cable.
forward
– Compatible Pocket PCs / PDAs: (as of 2006-09-14)
• Hewlett-Packard rx1950
• Hewlett-Packard hx2190
• Fujitsu-Siemens Pocket Loox C550
Set and actual values Mode of operation • Dell Axim x51v (624 MHz)
Refer to our website at www.ebmpapst.com/downloads for a continuously updated list of
EC-SYSTEMS
approved Pocket PCs / PDAs along with the suitable serial communication cables.
Accessories
545
HMS controller
Power input(1),
Mass
max.
max.
max.
Nominal data
Type VDC W W A °C kg
100 – Features:
7.25
– Requirements:
• Supply voltage of HMS controller: 16-57 VDC
• Fans with standard interface
– 24 / 48 VDC fan voltage
– PWM / linear control input (0-10 V)
– Open collector tach output
• NTC with R25 = 33 k (EPCOS type M 891/33k/J)
• System requirements: Windows 2000 / XP
– Safety: According to EN 50178
– EMC / EMI: Interference immunity EN 61000, interference emission EN 50081-1
546
information
General
AC centrifugal,
16 - 57 VDC - +
backward
L1
K1
Heater 1 F1 3,15 A * / 250 V
H1
Fan 1
H2 + PWM Hall
-
F6 10 A * / 250 V
F2 3,15 A * / 250 V
K2 Fan 2
N Heater 2
+ PWM Hall
-
AC centrifugal,
N
F3 3,15 A * / 250 V
* / 250 V
forward
F7 10 A
Fan 3
N
+ PWM Hall
-
Alarm 1 Alarm 3 Alarm 5
F4 3,15 A * / 250 V
Alarm 2 Alarm 4 Fan 4
K3 K4 K5 K6 K7 + PWM Hall
-
Alarm
Status contact NTC 1 NTC 2 F5 3,15 A * / 250 V
1 2 3 4 1 2 3 4 1 1
EC centrifugal,
DTR GND RS-232
RD TD RTS
backward
1 1 1 electrically insulated
0-57 V / 10 mA
547
548
Accessories
Inlet nozzles
Guard grilles
549
564
562
558
553
550
Contacts Technology Accessories EC-SYSTEMS EC centrifugal, EC centrifugal, back- EC centrifugal, AC centrifugal, AC centrifugal, General
forward ward for clean rooms backward forward backward information
Inlet nozzles
45˚
r1 118
r2
Øm
r3
Øn
4,
3
5
24
4x90˚
Øu
Øs
2,8
242
R14
5
q t 6x6 5,5 7 0˚
0˚ 6x6
96120-2-4013 120 (P) 1 146.0 94.4 — 18.0 0.80 16.0 — — 134.0 4x4.5 126.0
09566-2-4013 133 (P) 1 129.0 87.0 — 13.0 1.00 8.0 — — 118.0 4x4.5 103.0
09576-2-4013 175 / 190 (P) 1 170.0 125.5 — 14.0 1.25 10.0 — — 158.0 4x4.5 146.0
09609-2-4013 220 (P) 2 252.0 155.0 — 21.0 0.80 22.0 — — — — 199.0
96358-2-4013 225 (P) 1 223.0 146.0 — 28.0 1.50 25.0 — — 210.0 4x4.5 196.0
96359-2-4013 250 (P/S) 1 255.0 164.5 — 31.0 1.50 28.0 — — 240.0 4x4.5 221.0
96360-2-4013 270 / 280 (S) 1 280.0 182.5 — 35.0 1.50 31.0 — — 260.0 4x4.5 245.0
97512-2-4013 310 (P) 3 300.0 192.0 — 53.0 1.00 30.0 60.0 — — — 257.0
31050-2-4013 310 (A) 1 300.0 211.0 208.1 48.0 1.25 18.0 55.5 35.0 280.0 4x4.5 256.0
(2)
31051-2-4013 310 (A) 1 300.0 211.0 209.2 27.5 1.25 10.0 32.0 20.0 280.0 4x4.5 236.0
51357-2-4013 330 / 355 (P) 1 350.0 224.0 — 60.0 1.50 54.0 28.0 — 325.0 4x4.5 284.0
35560-2-4013 355 (A) 1 350.0 240.0 236.4 60.0 1.50 22.5 70.0 44.0 325.0 4x4.5 296.0
35561-2-4013 355 (2) (A) 1 350.0 240.0 238.0 30.0 1.50 11.0 35.0 22.0 325.0 4x4.5 267.0
54476-2-4013 400 (A) 1 370.0 257.0 — 66.0 1.50 22.0 50.0 90.0 345.0 4x4.5 322.0
54478-2-4013 450 (A) 1 413.0 287.0 — 71.0 1.50 25.0 55.0 100.0 390.0 6x9 362.0
63045-2-4013 450 (A) 1 450.0 289.0 284.5 75.0 1.50 28.0 87.0 49.0 425.0 6x9 360.0
54480-2-4013 500 (A) 1 520.0 323.0 — 79.0 1.50 28.0 65.0 115.0 430.0 6x9 408.0
63072-2-4013 500 (A) 1 470.0 342.0 337.0 75.0 2.00 28.0 87.0 55.0 445.0 6x9 412.0
63071-2-4013 560 (A) 1 515.0 385.0 380.0 82.0 2.00 30.0 95.0 60.0 490.0 6x9 461.0
63070-2-4013 630 (A) 1 634.0 433.0 427.0 98.5 2.00 37.0 14.0 72.0 600.0 6x10.5 525.0
subject to alterations (1) size with key for impeller material: (P) = plastic, (S) = sheet steel, (A) = aluminium (2) short inlet nozzle
550
information
General
Inlet nozzles with pressure-measuring point for air flow measurement
AC centrifugal,
The differential pressure approach compares the static pressure before the
backward
inlet nozzle with the static pressure inside the inlet nozzle.
0,5xD Air flow can be calculated on the basis of the differential pressure (difference
in pressure of the static pressures) in keeping with the following equation:
D
AC centrifugal,
k takes into account the specific nozzle characteristics.
forward
1 or 4 pressure measuring points are spaced along the circumference of
the inlet nozzle. Connection on the customer side is accomplished via a
premounted T tube connector. This tube connector is suited for pneumatic
hoses with an internal diameter of 4 mm.
Inlet nozzles with measuring device to determine air flow for backward curved centrifugal fans
EC centrifugal,
backward
Part no. with 1 nozzle Part no. with 4 nozzles (Piezometer ring) Size k-value For additional information, refer to p. 550
EC centrifugal,
35600-2-4013 35580-2-4013 355 155 35560-2-4013
forward
35610-2-4013 35590-2-4013 355 138 35561-2-4013
54515-2-4013 54500-2-4013 400 183 54476-2-4013
54514-2-4013 54510-2-4013 450 217 54478-2-4013
64015-2-4013 64005-2-4013 450 214 63045-2-4013
54518-2-4013 54516-2-4013 500 265 54480-2-4013
EC-SYSTEMS
64025-2-4013 64002-2-4013 500 283 63072-2-4013
64030-2-4013 64001-2-4013 560 350 63071-2-4013
64040-2-4013 64000-2-4013 630 480 63070-2-4013
subject to alterations
Accessories
Technology
Contacts
551
Inlet nozzles
4,
5
c
4
c
19
Øa
4x90˚
Øb
Øu
87
(2
)
192
d e e 6x6 5,5
0˚
09560-2-4013 076 / 085 (1) 1 92.0 63.4 84.0 6.0 3x4.2 0.80 6.8 —
09563-2-4013 097 (1) 1 116.0 80.0 108.0 10.0 3x4.5 0.80 10.0 —
09566-2-4013 108 1 129.0 87.0 118.0 13.0 4x4.5 1.00 8.0 —
09569-2-4013 120 1 142.0 100.0 132.0 9.0 4x4.5 1.00 8.0 —
09572-2-4013 133 1 150.0 112.0 142.0 12.0 4x4.5 1.00 10.0 —
09576-2-4013 140 / 146 1 170.0 125.5 158.0 14.0 4x4.5 1.25 10.0 —
(2)
09588-2-4013 160 1 185.0 130.0 175.0 17.0 4x4.5 0.75 12.0 —
09597-2-4013 180 3 210.0 149.0 — 28.0 — 1.25 25.0 —
09605-2-4013 200 / 225 2 230.0 175.0 213.0 24.0 6x5.5 1.25 20.0 203.0
25010-2-4013 250 (3) 1 300.0 193.0 285.0 51.5 6x7 1.50 27.3 —
28010-2-4013 280 (3) 1 336.0 228.0 315.0 58.5 6x7 1.50 36.5 296.0
31010-2-4013 310 (3) 1 374.0 257.0 350.0 62.5 6x9 1.50 39.5 327.0
(3)
35510-2-4013 355 1 413.0 289.0 390.0 71.5 6x9 1.50 43.5 372.0
40010-2-4013 400 (3) 1 456.0 325.0 430.0 79.5 6x9 1.50 45.5 414.0
45010-2-4013 450 (3) 1 530.0 365.0 510.0 91.5 6x9 1.50 49.5 459.0
subject to alterations (1) 3 drilled holes staggered by 120° (2) only for 09588-2-1013 (3) 6 drilled holes staggered by 60°
552
information
General
Guard grille
AC centrifugal,
silver-metallic gloss
backward
˚
90
4x
a
a
AC centrifugal,
Ød
20˚
Ød
forward
3x1
e b e b
EC centrifugal,
backward
Part no. Size Vers. a b d e
EC centrifugal,
forward
EC-SYSTEMS
Accessories
Technology
Contacts
553
Guard grille
Ø100
c
4,5
(4)
Size 160
d b
09603-2-4039 076 / 085 101.0 6.0 79.0 4.3 8.0 plastic coated, silver-metallic gloss
98214-2-4039 108 120.0 3.5 88.0 4.3 8.0 plastic coated, silver-metallic gloss
25028-2-4039 140 / 146 162.0 8.5 139.0 4.3 8.0 galvanised, chromatised in blue
17729-2-4039 160 175.0 3.5 139.0 4.6 7.0 galvanised, chromatised in blue
09526-2-4039 180 (6) 194.0 39.5 164.0 4.3 8.0 phosphated, plastic coated in RAL no. 9005
subject to alterations (6) only suitable for G2E180-EH03-01
554
information
General
Guard grille
AC centrifugal,
a
backward
max. 8
20˚
3x1
AC centrifugal,
forward
2
4,3
c
EC centrifugal,
backward
Part no. Size a b c Coating
83319-2-4039 097 (1) 96.0 3.5 71.0 phosphated, plastic coated in RAL no. 9005
09485-2-4039 097 (2) 114.0 3.5 88.0 phosphated, plastic coated in RAL no. 9005
09500-2-4039 133 / 146 145.0 4.0 122.0 phosphated, plastic coated in RAL no. 9005
31003-2-4039 180 192.0 9.5 174.0 phosphated, plastic coated in RAL no. 9005
EC centrifugal,
forward
0˚
2
3x1
EC-SYSTEMS
d
e
c
Guard grilles for centrifugal blowers with dual inlet (versions with EW motor)
Part no. Size a b c d e
Accessories
subject to alterations
Contacts
555
Guard grille
31
Guard grilles for blowers with dual inlet with plastic housing (cable exit side of blower)
Part no.
34265-2-2929
subject to alterations
31
Guard grilles for blowers with dual inlet with plastic housing (side of blower opposite cable exit)
Part no.
38182-2-2929
subject to alterations
556
information
General
Guard grille
AC centrifugal,
6x6 plastic coated in RAL no. 9005, black
backward
a
max. 8
AC centrifugal,
forward
c
EC centrifugal,
backward
Part no. Size a b c
EC centrifugal, back-
EC centrifugal,
forward
EC-SYSTEMS
Accessories
Technology
Contacts
557
Connection leads
AMP Universal Mate-N-Lok, suitable for: Jacketed cable, internal leads – Suitable for:
Connector shell AMP 926 682-3 H03VV-F6G0.5 black
D2E140-HR; D2E146-KA; D2E146-KB;
Plug pin AMP 926 886-1
D2E146-HR; D2E146-HS; D2E146-HT;
D2E160-FI; D2E160-FK
Brass lead tips – Plug assignment:
1 = Step 1 (white)
2 = Step 2 (red)
3 = Step 3 (grey)
4 = Step 4 (black)
6 5= N (blue)
85 6 = PE (green/yellow)
a
21956-4-1040 300.0
21957-4-1040 450.0
21958-4-1040 650.0
21959-4-1040 1000.0
subject to alterations
AMP Universal Mate-N-Lok suitable for: Jacketed cable, internal leads – Suitable for:
Connector shell AMP 927 231-3 H03VV-F6G0.5 black
D4E146-LV; K4E146-AB
Plug pin AMP 926 886-1
– Plug assignment:
1 = Step 1 (white)
Brass lead tips 2 = Step 2 (red)
3 = Step 3 (grey)
4 = Step 4 (orange)
5 = Step 5 (black)
6 8 = N (blue)
85 9 = PE (green/ yellow)
a
21810-4-1012 450.0
21811-4-1012 1050.0
21812-4-1012 1300.0
21813-4-1012 1600.0
21814-4-1012 2300.0
subject to alterations
558
information
General
Connection leads
AC centrifugal,
1 = N (black 2)
backward
2 = L (black 1)
3 = PE (green / yellow)
Core-end sleeves
AC centrifugal,
8
forward
85
800
EC centrifugal,
backward
Part no.
22243-4-1029
subject to alterations
EC centrifugal,
8
forward
85
800
EC-SYSTEMS
Control line for EC centrifugal fans (clean room technology)
Part no.
22242-4-1029
subject to alterations
Accessories
Technology
Contacts
559
Capacitors
560
information
General
Capacitors
AC centrifugal,
10 b – Designation: FPU or P2 according to
backward
IEC 252 (non-flammable, non-explosive,
circuit-breaking)
Ø a + 3,5
– Approval: VDE according to DIN EN 60252
Øa
M8
(VDE 0560/8)
– Calculated life time:
420 V; -25 to +85°C; 30,000 hrs; class A
AC centrifugal,
470 V; -25 to +85°C; 10,000 hrs; class B
7 ±1 35 +5
forward
500 V; -25 to +85°C; 3,000 hrs; class C
235 +10
-5
EC centrifugal,
backward
Part no. Capacity a b (max.) c (max.)
EC centrifugal,
02167-4-7320 12.0 µF 35.0 96.0 110.0
forward
90026-4-7320 14.0 µF 40.0 130.0 139.0
02168-4-7320 16.0 µF 40.0 96.0 130.0
02169-4-7320 20.0 µF 40.0 116.0 130.0
02170-4-7320 25.0 µF 40-45 116.0 130.0
subject to alterations
EC-SYSTEMS
– Pull-off protector: The housing expands by
max. 9 mm. The protector responds to over-
load by the generated excess pressure snap-
max. 9 mm
561
Terminal box
= = – Material: ABS
91,5 b 56 3 – Description: Two-piece terminal box for AC
motors of size 068 or 074, terminal strip
c
with 4- or 7-pole. Suitable for installation of
Øa
12
capacitor with 10 µF max.
– Type of protection: IP 54
58
94
29
18 27,5
Terminal box
Part no. AC motor a b c
562
information
General
Air filter
AC centrifugal,
plastic coated in RAL no. 9005, black
backward
– Filter: Viledon filter type R: PSB / 29 OS
(according to DIN 24185)
Separation capacity: < 86 %
c
b
Efficiency: < 20 %
Dust binding capacity: 650 g/m2
d
AC centrifugal,
a
forward
Air filters for centrifugal blowers (with die-cast aluminium housing)
EC centrifugal,
backward
Part no. Size a b c d e Spare filter
EC centrifugal, back-
EC centrifugal,
forward
EC-SYSTEMS
Accessories
Technology
Contacts
563
Speed setting, 3-phase (with 5 steps)
for wall assembly
Nominal voltage
Current draw
Frequency
Mass
Nominal data
Type VAC Hz A kg
266
185
4xØ5,5
189
166
309
224
189
304
564
information
General
Speed setting, single-phase (with 5 steps)
for wall assembly
AC centrifugal,
– Voltage steps: 1~ 230 / 160 / 145 / 130 / 105 VAC
backward
– Type of protection: IP 40
AC centrifugal,
forward
EC centrifugal,
Nominal voltage
backward
Current draw
Frequency
Mass
Nominal data
Type VAC Hz A kg
144
EC centrifugal,
forward
4xØ7
86
EC-SYSTEMS
167
147
Accessories
204
154
Technology
200
Contacts
565
Motor protection switch, 3-phase
for assembly inside a cabinet
Nominal voltage
Current draw
Frequency
Mass
Nominal data
Type VAC Hz A kg Auxiliary contactor
TPD 250-AB01 -01 3~ 400 50/60 25.0 0.3 without auxiliary contactor
TPD 250-AB01 -02 3~ 400 50/60 25.0 0.3 with break contact
TPD 250-AB01 -03 3~ 400 50/60 25.0 0.3 with make contact
subject to alterations
– Electr. connection:
68
7 54,5
66,5
566
information
General
Motor protection switch, single-phase
for assembly inside a cabinet
AC centrifugal,
backward
AC centrifugal,
forward
EC centrifugal,
Nominal voltage
backward
Current draw
Frequency
Mass
Nominal data
Type VAC Hz A kg Auxiliary contactor
EC centrifugal,
forward
46
103
45
EC-SYSTEMS
70
78
Accessories
Technology
Contacts
567
Motor-protection switch, single phase and three-phase
for wall assembly
Nominal voltage
Current draw
Frequency
Mass
Nominal data
Type VAC Hz A kg Auxiliary contactor
TPD 250-AA01 -01 3~ 400 50/60 25.0 0.6 without auxiliary contactor
TPD 250-AA01 -02 3~ 400 50/60 25.0 0.6 with break contact
TPD 250-AA01 -03 3~ 400 50/60 25.0 0.6 with make contact
TPE 100-AA01 -01 1~ 230 50/60 10.0 0.6 without auxiliary contactor
TPE 100-AA01 -02 1~ 230 50/60 10.0 0.6 with break contact
TPE 100-AA01 -03 1~ 230 50/60 10.0 0.6 with make contact
subject to alterations
38 20
568
information
General
Star-delta switch / repair switch
Third-party accessories from Möller Electric GmbH
AC centrifugal,
backward
AC centrifugal,
forward
for wall installation
EC centrifugal,
backward
Designation Installation
EC centrifugal,
forward
for wall installation
EC-SYSTEMS
Repair switch, lockable (available from Möller Electric GmbH)
Designation Installation
569
570
Technology
Motors
Impellers
Control technology
Technical parameters & scope
571
594
590
576
572
Contacts Technology Accessories EC-SYSTEMS EC centrifugal, EC centrifugal, back- EC centrifugal, AC centrifugal, AC centrifugal, General
forward ward for clean rooms backward forward backward information
Technical parameters & scope
572
information
General
AC centrifugal,
backward
AC centrifugal,
Left: Endurance test room
forward
Middle: Shock test
Right: Chamber test rig
EC centrifugal,
All ebm-papst products are subjected to comprehensive tests complying The products described in this catalogue are designed, developed and
backward
with the normative specifications. In addition to this, the tests also reflect produced in keeping with the standards in place for the relevant product
the vast experience and expertise of ebm-papst. and, if known, the conditions governing the relevant fields of application.
EC centrifugal,
properties.
forward
Balancing quality
Testing the balancing quality is carried out in compliance with Leakage current
– Residual imbalance according to DIN ISO 1940 Information on the leakage current is provided in the product-specific
– Standard balancing quality level G 6.3 data sheets.
Should you require a higher balancing quality level for your specific The measurement takes place according to Fig. D.1 according to
EC-SYSTEMS
application, please let us know and specify this when ordering your IEC 60990, Fig. 4.
product.
Approvals
Chemo-physical strain / performance parameters In case you require a specific approval for your ebm-papst product
Should you have questions about chemo-physical strain, please direct (VDE, UL, GOST, CCC, CSA, etc.) please let us know.
them to your ebm-papst contact. Most of our products can be supplied with the relevant approval.
Accessories
Our products are not designed for use in the aviation and aerospace intake and discharge (installation type A according to DIN 24163 Part 1)
industry! and are operated at nominal voltage (for AC, also at nominal frequency)
without additional attachments such as the guard grille.
As required by the standard, the air performance curves correspond to
an air density of 1.2 kg/m3.
Contacts
573
Room for precision noise measuring
Noise measurements
All noise measurements are carried out in low-reflective test rooms with
reverberant floor. Thus the ebm-papst acoustic test chambers meet the
requirements of precision class 1 according to DIN EN ISO 3745. For noise
measurement, the fans being tested are placed in a reverberant wall and
operated at nominal voltage (for AC, also at nominal frequency) without
additional attachments such as the guard grille.
2d
574
information
General
AC centrifugal,
backward
AC centrifugal,
forward
Curves
EC centrifugal,
backward
Adding multiple noise sources with the same level
15
[dB]
Adding 2 noise sources with the same volume results in a level increase
of approx. 3 dB. The noise characteristics of multiple identical fans can
Increase in sound pressure / sound power level
The level increase measured from the diagram is 9 dB. Thus the overall
sound level of the installation can be expected to be 84 dB(A).
0
1 2 5 8 10 15 20 25
EC centrifugal,
Number of sources of sound with identical level
forward
Adding two noise sources with different levels
3
[dB]
diagram opposite.
2
EC-SYSTEMS
75 dB(A) at the operating point and an axial fan A3G710 with 71 dB(A) in
a ventilation unit. The level difference is 4 dB. The level increase can now
1
be read in the diagram as approx. 1.5 dB. This means that the overall
sound level of the unit can be expected to be 76.5 dB(A).
0
0 4 8 12 16 20 24
The sound level is independent of the distance from the noise source.
Conversely, the sound pressure level decreases as distance from the
-10
noise source increases. The diagram to the right shows the level decrease
expressed in terms of an output measurement at a distance of 1 m from
Decrease in sound pressure level
-20
the operating point. Now, you want to measure the noise characteristics at
-30
1 2 5 10 20 50 100
Distance [m]
Contacts
575
Impellers
axial fans
centrifugal fans, backward curved
1200 centrifugal blowers, single inlet
centrifugal blowers, dual inlet
1000 diagonal fans
800
600
400
200
576
information
General
AC centrifugal,
backward
AC centrifugal,
forward
Axial fans
Operating range
Noise / efficiency curve
EC centrifugal,
To the right of the "saddle" (right part of the air performance curve):
backward
– Maximum efficiency
[%]
[dB(A)]
[Pa]
– Minimal noise
To the left of the "saddle" (left part of the air performance curve):
– Stall area
EC centrifugal,
0
forward
[m³/h]
EC-SYSTEMS
Direction of air flow "V" Direction of air flow "A"
Accessories
"V" "A"
Technology
Contacts
577
Effects when mounted in wall ring or in the aperture
Curve
Mounting the fan in a wall ring can significantly increase the air
performance in the operating range.
[%]
[Pa]
1
2 1
0
[m³/h]
2
1 Projecting on 2 Flush on inlet side 3 Immersed on
inlet side inlet side
x/D=7% x/D=0% x / D = -7 %
1 3
x x x
1
D
3 2
0
[m³/h]
578
information
General
AC centrifugal,
backward
AC centrifugal,
forward
Effects with guard grilles
Curve
EC centrifugal,
Mounting a guard grille reduces the air performance of the axial fan.
backward
[%]
[Pa]
1 Without guard grille 1
EC centrifugal,
0
forward
[m³/h]
The pressure drop in Pa can be roughly calculated according to the Diameter D Correction factor GG
following equation: 130 10000
∆pGG = GG . 10-8 . V2 V in [m3/h] 143 6600
EC-SYSTEMS
180 2550
200 1650
For the guard grilles used at ebm-papst, the correction factor GG can be 250 650
used depending on the impeller diameter D from the table to the right. 300 300
315 240
350 150
400 90
Accessories
450 55
500 35
560 20
630 11
710 6
800 3
910 1.5
990 0.9
Technology
Contacts
579
Effects of obstructions on the suction or exhaust side
Curve
Disturbances or obstructions on the suction or pressure side reduce
the air performance of the axial fan.
[Pa] 1
5
0
[m³/h]
1 x/D=
2 x / D = 35 %
3 x / D = 18 %
4 x/D= 9%
X
5 x/D= 5%
D
5 4 3 1
0
[m³/h]
580
information
General
AC centrifugal,
backward
AC centrifugal,
forward
Centrifugal fans with backward curved blades
Operating range
Noise / efficiency curve
EC centrifugal,
Middle part of air performance curve:
backward
– Maximum efficiency
[%]
[dB(A)]
[Pa]
– Minimal noise
To the right and the left of the middle part of the air performance curve:
– Reduced efficiency
EC centrifugal,
0
forward
[m³/h]
EC-SYSTEMS
influences the air performance and efficiency of the centrifugal fan.
[%]
[Pa]
1 s / D = 0.4 %
2 s / D = 1.0 %
3 s / D = 1.4 %
S
Accessories
3 2 1
D
3 2 1
0
[m³/h]
Technology
Contacts
581
Effects of overlapping dimension
Curve
The axial overlap between the inlet nozzle and impeller cover plate
influences the air performance and efficiency of a centrifugal fan.
[%]
[Pa]
1
2
3
1 x / D = 0.6 %
2 x/D= 0 %
X
3 x / D = -0.8 %
1
3 2
D
[m³/h]
B
0,98
0,97
0,96
0,95
Correction factor for air flow
0,5xD
H
0,94
D
0,93
0,92
582
information
General
AC centrifugal,
backward
AC centrifugal,
forward
Air flow measurement for inlet nozzles with
EC centrifugal,
pressure-measuring point
backward
The differential pressure approach compares the static pressure before
the inlet nozzle with the static pressure inside the inlet nozzle.
EC centrifugal,
forward
Air flow can be calculated on the basis of the differential pressure
(difference in pressure of the static pressures) in keeping with the
following equation:
V = k . ∆p W V in [m3/h] and ∆pW in [Pa]
EC-SYSTEMS
If constant air flow control is used, then the nozzle pressure has to be
kept constant: ∆pW = V2 : k2
k takes into account the specific nozzle characteristics.
583
Single and dual inlet centrifugal blowers
with forward curved blades
Operating range
Noise / efficiency curve
Middle part of air performance curve:
– Maximum efficiency
[%]
[dB(A)]
[Pa]
– Minimal noise
– higher performance density than with the backward curved
centrifugal fan
To the right and the left of the middle part of the air performance curve:
– Reduced efficiency
– Increasing noise
The optimum operating range of the fan is shaded in green in the
curve given here.
[m³/h]
D = 0.853 · D
B
E = 0.784 · D
45˚ R
H F = 0.715 · D
45˚
C
26˚
G G = 0.646 · D
45˚
45˚
H = 0.612 · D
45˚ 45˚
D
J = 0.720 · D
F
E
K = 0.689 · D
R = 0.073 · D
Adjusting the dimensions to diminished mounting spaces is possible.
584
information
General
AC centrifugal,
backward
AC centrifugal,
forward
Effects of step diffusers
Curve
EC centrifugal,
A diffuser mounted on the exhaust side with connected exhaust tunnel
backward
increases air performance and efficiency of the centrifugal blower.
[%]
[Pa]
1 without step diffuser 2 with step diffuser
1 2
2
0
EC centrifugal,
0
forward
[m³/h]
EC-SYSTEMS
[Pa]
1 x/D=
2 x / D = 30 %
3 x / D = 23 %
4 x / D = 15 %
x / D = 7.5 %
Accessories
5
D
X X
5 4 3 2 1
0
[m³/h]
Technology
Contacts
585
Effects caused by obstructions on the inlet side for constant air flow
EC centrifugal blowers
Constant air flow is attained with unimpaired inflow only.
An obstructed (e. g. asymmetrical or partially blocked) air flow can have a
significant effect on the curve behaviour and cause large deviations from
a constant air flow curve.
586
information
General
AC centrifugal,
backward
AC centrifugal,
forward
Diagonal fans (axial design)
Operating range
Noise / efficiency curve
EC centrifugal,
Directly to the right of the "saddle" (right part of the air
backward
performance curve):
[%]
[dB(A)]
[Pa]
– Maximum efficiency
– Minimal noise
To the left of the "saddle" (left part of the air performance curve):
The saddle of the diagonal / mixed flow fan is slightly higher than that
of the axial fan. This means that the technical ratings in the optimal
stall area optimum operating range
operating range are better than those of the axial fan.
0
EC centrifugal,
0
The optimum operating range of the fan is shaded in green in the
forward
[m³/h]
curve given here.
Mounting information
The conical housing (part of delivery) makes sure the necessary gap
EC-SYSTEMS
dimension is kept.
Effects
The effects of the diagonal / mixed flow fan are similar to those listed
for the axial fan (p. 577-580). Accessories
Technology
Contacts
587
Dimensioning / change in speed
Curve
Influence of speed n
160
[%]
140
A change in speed influences:
1.4n
– Air flow V 120 1.3n
V~n 1.2n
100
1.1n
– Static pressure increase pfa
n
80
∆pfa ~ n2 0.9n
– Requirement of energy P1
60
0.8n
P1 ~ n3 0.7n
40
0.6n
20
0
[%]
Curve
determined using the diagram to the right and the following formula:
Lw - Lw = 50 dB . log (n : n )
2 1 2 1
10
modification in sound pressure level
n2 = Starting speed
-20
588
information
General
AC centrifugal,
backward
AC centrifugal,
forward
Curve
EC centrifugal,
backward
Influence of impeller diameter D
160
[%]
1.3D
140
A change in impeller diameter influences:
– Air flow V 120
1.2D
V~ D3 1.1D
100
∆pfa ~ D2 0.9D
– Requirement of energy P1
60
0.8D
P1 ~ D5 0.7D
40
0.6D
20
0
EC centrifugal,
[%]
forward
Curve
EC-SYSTEMS
Influence of width of air discharge b (only for centrifugal impellers)
160
[%]
140
V~b
100
∆pfa = const
60
– Requirement of energy P1
Accessories
[%]
Technology
Contacts
589
Motors
3~ AC voltage
No No Yes No Yes
connector
Electronics Electronics
(see p. 598) (see p. 598)
Design of circuit
diagram - Stator -
Steinmetz circuit
Rotor principle Squirrel cage Squirrel cage Squirrel cage Magnetic rotor Magnetic rotor
Continuous speed
No No No Yes Yes
setting integrated
590
information
General
AC centrifugal,
backward
AC centrifugal,
forward
AC motors
AC motors (induction motors) are based in their function on the principle Shaded-pole motor
EC centrifugal,
of the asynchronous rotation of the stator rotating field and rotor. Each pole of the motor is divided electro-magnetically into a main
backward
and auxiliary pole (split) via a cage winding in order to generate a
Torque curves of the motor types starting torque.
At ebm-papst, shaded-pole motors are available as 2 or 4-pole
[Ncm]
MK
4
M Sa
EC centrifugal,
5
M St
forward
Advantages:
– Extremely robust motor design due to cast squirrel cage rotor and
stable bearing system
Key: – Cost-efficient motor
1 – EC motor 5 – System characteristic – Extremely easy to connect
2 – 3-phase motor MSt – Starting torque
EC-SYSTEMS
– Long service life
3 – Single-phase motor MSa – Saddle torque
4 – Shaded-pole motor MK – Breakdown torque
Start-up current
The start-up current of our AC motors is maximally 4x higher
Accessories
591
Single-phase capacitor motor 3-phase motor
Two cores (main winding MW and auxiliary winding AW) generate the The three motor cores are offset by 120° and generate a circular rotating
rotating field of the single-phase capacitor motor via a capacitor field when connected to the 3-phase mains.
connected in series to form an auxiliary winding.
c ≈ 70 µF/kW
(230 VAC ∆)
Advantages:
Advantages: – Extremely robust motor design due to cast squirrel cage rotor and
– Extremely robust motor design due to cast squirrel cage rotor and stable bearing system
stable bearing system – Very good vibration and noise behaviour
– Diverse options for setting speed – Efficiency between 40 % and 80 % (depending on the motor size)
– Efficiency between 30 % and 75 % (depending on motor size) – Long service life
– Long service life
– Good vibration and noise behaviour
Torque curves of 3-phase motors
[Ncm]
Key:
1 – Delta 3 – Steinmetz circuit
2 – Star
592
information
General
AC centrifugal,
backward
AC centrifugal,
forward
EC motors
EC motors are based in their function on the principle of the Single-core motor
EC centrifugal,
synchronous rotation of stator rotating field and rotor.
backward
Torque curves of the motor types Electronics
[Ncm]
Advantages:
MK – Integrated speed setting
– Efficiency between 50 % and 80 % (depending on the motor size)
4
– Long service life
M Sa
EC centrifugal,
5
M St
forward
3-core motor
Key:
1 – EC motor 5 – System characteristic
2 – 3-phase motor MSt – Starting torque Electronics
EC-SYSTEMS
3 – Single-phase motor MSa – Saddle torque
4 – Shaded-pole motor MK – Breakdown torque
Accessories
Advantages:
– Integrated speed setting
– Good efficiency between 60 % and 90 %
(depending on the motor size)
– Long service life
– Very good vibration and noise behaviour even in controlled operation
– Can be used as drive motor
Technology
Contacts
593
Control technology
Phase-angle control
Frequency inverter
Frequency inverter
Series resistance
Speed stepping
integrated with
with sine filter
switch power
Transformer
integrated
external
supply
Installation + – + – – – – ++ – –
Noise behaviour + ++ – –– – – + ++ + +
Power input –– – – – – + + ++ + +
Service life + + – – + – + + + +
+ = positive + + = very positive – = negative – – = very negative
[W]
70
1500
60
50 1000
40
500
30
0 1000 2000 3000 4000 5000 6000 [CFM] 0 1000 2000 3000 4000 5000 6000 [CFM]
2000 4000 6000 8000 10000 [m³/h] 2000 4000 6000 8000 10000 [m³/h]
Key: Key:
ebm-papst EC controls ebm-papst EC controls
Frequency inverter with sine filter Frequency inverter with sine filter
Phase-angle control without sine filter Phase-angle control without sine filter
Phase-angle control with sine filter Phase-angle control with sine filter
Transformer Transformer
594
information
General
AC centrifugal,
backward
AC centrifugal,
forward
Speed setting with AC motors
Speed setting helps to optimise power input When selecting a voltage controller, note that the nominal current in the
EC centrifugal,
and the flow noise as requested. partial load range can be up to 20 % (depending on the controller) above
backward
the specified maximum current.
Series resistance
C – Fixed speed steps
Transformer
EC centrifugal,
L1
C – Fixed speed steps
forward
4
Tr 3
AW ASM – Speed setting via change in motor voltage
2 1~
1
MW
PE
EC-SYSTEMS
Phase-angle control
C – Continuous speed setting
AW ASM – Speed setting via change in motor voltage
1~
– Cost-efficient
MW
L1
Tr – Acoustic performance and warming has to be reviewed
N in the application
Accessories
PE
L1
– Speed setting via change in frequency of rotating field
U
+ U
L2
V V W
– High efficiency
Technology
L3
W
Note: An all-pole sine filter (phase-phase and phase-earth)
T2 T4 T6
has to be used.
PE
Contacts
595
Electrical connections AC
Fans (1~ 230 VAC power line) Fans, 1 speed (3~ 230 VAC power line)
A1) Single-phase capacitor motor B) Shaded pole motor C1) Delta connection (3~ 230 VAC power system)
with TOP wired internally with TOP wired internally without TOP
A2a) Single-phase capacitor motor D1) Delta connection (3~ 230 VAC power line)
with connection for external TOP with TOP
U1 = black
L PE N U1 = blue PE L1 L2 L3 TOP
C TOP U2 = green
U2 = black
U1 V1 W1 V1 = blue
Z = brown
U1 U2 Z
= green/ V2 = white
yellow W1 = brown
U2 V2 W2
W2 = yellow
= green/
yellow
U1 = blue
C U2 = black
Z = brown
U1 Z U2 TOP TOP
= green/
L N PE yellow
Fans
with terminal box
596
information
General
AC centrifugal,
backward
AC centrifugal,
forward
Fans, 1 speed (3~ 400 VAC power line) Fans, 2 speeds via ∆/Y-switch (3~ 400 VAC power line)
EC centrifugal,
backward
C2) Star connection (3~ 400 VAC power system) E1) Delta connection (high speed) E2) Star connection (low speed)
without TOP without TOP without TOP
D2) Star connection (3~ 400 VAC power line) F1a) Delta connection (high speed) F2a) Star connection (low speed)
EC centrifugal,
with TOP with TOP with TOP
forward
PE L1 L2 L3 TOP
U1 = black PE L1 L2 L3 TOP
U1 = black PE L1 L2 L3 TOP
U1 = black
U2 = green U2 = green U2 = green
U1 V1 W1
V1 = blue U1 V1 W1 V1 = blue U1 V1 W1
V1 = blue
V2 = white V2 = white V2 = white
W1 = brown W1 = brown W1 = brown
U2 V2 W2 U2 V2 W2 U2 V2 W2
EC-SYSTEMS
W2 = yellow W2 = yellow W2 = yellow
= green/ = green/ = green/
yellow yellow yellow
Direction of rotation is reversed by swapping F1b) Delta connection (high speed) F2b) Star connection (low speed)
two line phases. with TOP with TOP
U1 = black U1 = black
Accessories
U2 = green U2 = green
V1 = blue V1 = blue
U1 V1 W1 W2 U2 V2 TOP TOP U1 V1 W1 W2 U2 V2 TOP TOP
V2 = white V2 = white
L1 L2 L3 PE W1 = brown L1 L2 L3 PE W1 = brown
W2 = yellow W2 = yellow
Fans = green/ Fans = green/
with terminal box yellow with terminal box yellow
Technology
597
Speed setting with EC motors
Interface Control unit Power unit Interface Control unit Power unit
EMC filter
0-10 VDC 0-10 VDC
PWM DC/DC transformer PWM
EMC filter
Commutations unit
Rectifier
Commutations unit
Feedback Feedback
Link electrolytic capacitor
Inverter stage
CAN CAN
LON LON
Drive
Inverter stage
Drive
RS485 RS485
598
information
General
AC centrifugal,
backward
AC centrifugal,
forward
Types of alarms and reactions with EC motors
Typical features of the ebm-papst commutation electronics:
EC centrifugal,
With DC-fed EC motors, certain faults in modes of operation are
backward
– Input for analogue and digital signals
recognised by the electronics, and the motor is automatically restarted.
– Open and closed loop control as well as monitoring of the motor
With AC-fed EC motors, certain faults in modes of operation are
– Integrated EMC filter
recognised by the electronics, and the motor is switched off.
– High efficiency throughout the entire speed range
The motor restarts automatically after the following failures have
– Speed setting via linear set value (0-10 VDC) or PWM signal
EC centrifugal,
Here, hardware or software reset is required:
forward
– Motor temperature too high
– Temperature of cooling element or ambient temperature of
electronics too high
– Hall failure
EC-SYSTEMS
Hardware reset
Switching off the fan and restarting it after one minute results in
hardware reset.
Software reset
Software reset is via ebmBUS and LISA software, hand-held control
Accessories
599
Electrical connections EC
33 K 4.7 K
Lin/PWM control input
0-10 VDC / PWM
yellow
Counter
12 V 12 V Speed display
47 V
GND
Temperature Speed setting Speed setting Full speed Speed setting blue
control module with
PWM 1 - 10 kHz potentiometer 1 V - 10 V
50002-1-0174
50003-1-0174
100% PWM -> n=max 10 V -> n=max
approx. 10% PWM -> n=min approx. 1 V -> n=min
< 10% PWM -> n=0 < 1 V -> n=0
Line 1
0-10 V
PWM
Tach
GND
+
Line Connection Colour Assignment / function Line Connection Colour Assignment / function
1 + red Maximum ripple ± 3.5 % 1 Tach white Tach output:
GND blue GND 2 pulses / revolution (M1G045 / M1G055)
3 pulses / revolution (M1G074/M3G084)
0-10 V / PWM yellow Control input (Impedance 100 k)
600
information
General
AC centrifugal,
backward
AC centrifugal,
forward
H1) EC motors (size 055, line-fed)
EC centrifugal,
backward
Notes on various control possibilities and their applications
Umin = 15 V
Imax = L
10 mA Mains brown +
50/60 Hz N
blue -
+
PWM U Voltage output
+10 V max. 1.1 mA
10 K -
red
12 V
Lin/PWM control input
0-10 VDC / PWM
yellow
EC centrifugal,
forward
1 F
GND
blue
Speed setting Speed setting Full speed Speed setting Counter
Tach output
with variable 1 pulse per revolution Isink max. 10 mA
PWM 1 - 10 kHz resistance 1 V - 10 V
Controller white 680
47 V
100% PWM -> n=max 10 V -> n=max
approx. 10% PWM -> n=min approx. 1 V -> n=min Alarm
< 10% PWM -> n=0 < 1 V -> n=0
EC-SYSTEMS
start up at > 1.4 V start up at > 1.4 V Speed display
Line 1 Line 2
0-10 V
+10 V
PWM
Tach
GND
PE
N
L
Accessories
Line Connection Colour Assignment / function Line Connection Colour Assignment / function
1 L brown Mains 50/60 Hz, phase 2 +10 V red Voltage output +10 V max. 1.1 mA
N blue Mains 50/60 Hz, neutral 0-10 V / PWM yellow Control input (Impedance 100 k)
PE green/yel Protective earth GND blue GND
Tach white Tach output: 1 pulse per revolution
Technology
Contacts
601
H2) EC motors (size 055, line-fed and constant air flow)
Notes on various control possibilities and their applications
Umin = 15 V
Imax = L
10 mA Mains brown +
50/60 Hz N
blue -
PE
green/yellow
+
PWM U Voltage output
+10 V max. 1.1 mA
10 K -
red
12 V Lin/PWM input for
set value
0-10 VDC / PWM
yellow
1 F
GND
blue
Air flow setting Air flow setting Max. Air flow setting Counter
Tach output
with variable air flow 1 pulse per revolution Isink max. 10 mA
PWM 1 - 10 kHz resistance 1 V - 10 V
Controller white 680
47 V
100% PWM -> Vmax 10 V -> Vmax
17% PWM -> Vmin 1.7 V -> Vmin Alarm
< 15% PWM -> V= 0m3/h < 1.5 V -> V= 0m3/h
Line 1 Line 2
0-10 V
+10 V
PWM
Tach
GND
PE
N
L
Line Connection Colour Assignment / function Line Connection Colour Assignment / function
1 L brown Mains 50/60 Hz, phase 2 +10 V red Voltage output +10 V max. 1.1 mA
N blue Mains 50/60 Hz, neutral 0-10 V / PWM yellow Input for set value (impedance 100 k)
PE green/yel Protective earth GND blue GND
Tach white Tach output: 1 pulse per revolution
602
information
General
AC centrifugal,
backward
AC centrifugal,
forward
J1) EC motors (size 074, line-fed)
EC centrifugal,
backward
Notes on various control possibilities and their applications
Umin = 15 V
Imax = L
10 mA Mains black +
50/60 Hz N
blue -
+
PWM U Voltage output
+10 V max. 1.1 mA
10 K -
red
12 V
Lin/PWM control input
0-10 VDC / PWM
yellow
EC centrifugal,
forward
1 F
GND
blue
Speed setting Speed setting Full speed Speed setting Counter
Tach output
with variable 1 pulse per revolution Isink max. 10 mA
PWM 1 - 10 kHz resistance 1 V - 10 V
Controller white 680
47 V
100% PWM -> n=max 10 V -> n=max
approx. 10% PWM -> n=min approx. 1 V -> n=min Alarm
< 10% PWM -> n=0 < 1 V -> n=0
EC-SYSTEMS
start up at > 1.4 V start up at > 1.4 V Speed display
Line 1 Line 2
0-10 V
+10 V
PWM
Tach
GND
PE
N
L
Accessories
Line Connection Colour Assignment / function Line Connection Colour Assignment / function
1 L black Mains 50/60 Hz, phase 2 +10 V red Voltage output +10 V max. 1.1 mA
N blue Mains 50/60 Hz, neutral 0-10 V / PWM yellow Control input (Impedance 100 k)
PE green/yel Protective earth GND blue GND
Tach white Tach output: 1 pulse per revolution
Technology
Contacts
603
J2) EC motors (size 074, line-fed and constant air flow)
Notes on various control possibilities and their applications
L
Mains black +
50/60 Hz N
10 K blue -
PE
green/yellow
+
PWM U Voltage output
+10 V max. 1.1 mA
10 K -
red
12 V Lin/PWM input
for set value
0-10 VDC / PWM
yellow
1 F
GND
blue
Speed setting Air flow setting Max. Air flow setting Counter
Tach output
with variable air flow 1 pulse per revolution Isink max. 10 mA
PWM 1 - 10 kHz resistance 1 V - 10 V
Controller white 680
47 V
100% PWM -> V=max 10 V -> V=max
approx. 17% PWM -> V=min approx. 1.7 V -> V=min Alarm
< 15% PWM -> V=0 < 1.5 V -> V=0
Line 1 Line 2
0-10 V
+10 V
PWM
Tach
GND
PE
N
L
Line Connection Colour Assignment / function Line Connection Colour Assignment / function
1 L black Mains 50/60 Hz, phase 2 +10 V red Voltage output +10 V max. 1.1 mA
N blue Mains 50/60 Hz, neutral 0-10 V / PWM yellow Input for set value (impedance 100 k)
PE green/yel Protective earth GND blue GND
Tach white Tach output: 1 pulse per revolution
604
information
General
AC centrifugal,
backward
AC centrifugal,
forward
K1) EC motors (size 084, line-fed)
EC centrifugal,
backward
Notes on various control possibilities and their applications
Umin = 15 V
Imax = L
10 mA Mains black +
50/60 Hz N
blue -
PE
NC
Alarm relay:
white1
Break for failure
+ COM
(2 A, 250 VAC, AC1)
PWM U white2
- Voltage output
10 K
red +10 V
max. 1.1 mA
12 V
EC centrifugal,
PWM
forward
1 F
GND
blue
Speed setting Speed setting Full speed Speed setting
with variable
PWM 1 - 10 kHz resistance 1 V - 10 V
EC-SYSTEMS
start up at > 1.4 V start up at > 1.4 V
Line 1 Line 2
0-10 V
+10 V
PWM
COM
GND
NC
PE
N
L
Accessories
Line Connection Colour Assignment / function Line Connection Colour Assignment / function
1 L black Mains 50/60 Hz, phase 2 +10 V red Voltage output +10 V max. 1.1 mA
N blue Mains 50/60 Hz, neutral 0-10 V / PWM yellow Control input (Impedance 100 k)
PE green/yel Protective earth GND blue GND
NC white1 Alarm relay, break for failure
COM white2 Alarm relay, COMMON
Technology
Contacts
605
K2) EC motors (size 084/112 with ebmBUS, mains-powered)
KL1 KL2
+15 V
RS B
RS A
0V
PE
606
information
General
AC centrifugal,
backward
AC centrifugal,
forward
L1) EC motors (size 112, single-phase mains-powered)
EC centrifugal,
backward
KL3 KL2 KL1
4-20 mA
0-10 V
0-10 V
+20 V
+10 V
PWM
PWM
RS B
RS B
COM
RS A
RS A
GND
GND
OUT
NO
NC
PE
N
L
Connector Connection Assignment / function Connector Connection Assignment / function
EC centrifugal,
GND GND
forward
RSB RS485 interface for ebmBUS; RS B
RSA RS485 interface for ebmBUS; RS A
RSB RS485 interface for ebmBUS; RS B
RSA RS485 interface for ebmBUS; RS A
EC-SYSTEMS
KL3 KL2 KL1
4-20 mA
0-10 V
0-10 V
+20 V
+10 V
PWM
PWM
RS B
RS B
COM
RS A
RS A
GND
GND
OUT
NO
NC
PE
L1
L2
L3
GND GND
RSB RS485 interface for ebmBUS; RS B
RSA RS485 interface for ebmBUS; RS A
RSB RS485 interface for ebmBUS; RS B
RSA RS485 interface for ebmBUS; RS A
Contacts
607
M) EC motors (size 150, three-phase mains-powered)
KL3 KL2 KL1
4-20 mA
0-10 V
0-10 V
+20 V
+10 V
PWM
PWM
RS B
RS B
COM
RS A
RS A
GND
GND
OUT
NO
NC
PE
L1
L2
L3
Connector Connection Assignment / function Connector Connection Assignment / function
PE PE Protective earth KL3 OUT Master output 0-10 V max. 3 mA
KL1 L3 Mains; L3 GND GND
L2 Mains; L2 0-10 V / PWM Control / Actual value input (Impedance 100 k)
L1 Mains; L1 +10 V Supply for external potentiometer,
KL2 NC Alarm relay, break for failure 10 VDC (+10 %) @ 10 mA
COM Alarm relay, COMMON (2A, 250 VAC, AC1) +20 V Supply for external sensor,
NO Alarm relay, make for failure 20 VDC (±20 %) @ 50 mA
4-20 mA Control / Actual value input
0-10 V / PWM Control / Actual value input
GND GND
RSB RS485 interface for ebmBUS; RS B
RSA RS485 interface for ebmBUS; RS A
RSB RS485 interface for ebmBUS; RS B
RSA RS485 interface for ebmBUS; RS A
608
RS A RS A RS A
RS B RS B RS B
PC with interface
converter (RS485)
RS A RS A RS A
RS B RS B RS B
sensor
Pressure
+20 V +20 V +20 V
NO NO NO
Connection diagram: Condensing pressure control with master-slave fans
NC NC NC
L1 L1 L1
L2 L2 L2
L3 L3 L3
PE PE PE
Slave
Slave
Master
Mains
Mains
Mains
50/60 Hz
50/60 Hz
50/60 Hz
609
Contacts Technology Accessories EC-SYSTEMS EC centrifugal, EC centrifugal, back- EC centrifugal, AC centrifugal, AC centrifugal, General
forward ward for clean rooms backward forward backward information
fan agent
motor agent
Germany
ebm-papst ebm-papst ebm-papst
Mulfingen GmbH & Co. KG St. Georgen GmbH & Co. KG Landshut GmbH
610
information
General
AC centrifugal,
backward
AC centrifugal,
forward
Europe Czech Republic / Slovakia Hungary
EC centrifugal,
ebm-papst CZ s.r.o. ebm-papst Industries Kft.
Austria
backward
Krátká 379 Mátyás u. 1/A
ebm-papst Motoren & Ventilatoren GmbH
CZ-66461 Rajhradice u Brna H-2220 Vecsés
Westbahnstraße 5
Phone +420 / 5 / 47 23 26 16 Phone +36 / 29 / 55 01 90
A-4490 St. Florian
Fax +420 / 5 / 47 23 26 22 Fax +36 / 29 / 55 01 94
Phone +43 / 72 24 / 66 01 10
info@ebmpapst.cz office@hu.ebmpapst.com
Fax +43 / 72 24 / 66 01 120
www.ebmpapst.cz www.ebmpapst.hu
info@at.ebmpapst.com
EC centrifugal,
ebm-papst Oy ebm-papst Limited
VIBO Benelux B. V.
forward
Eesti Filiaal Portlaoise Business & Technology Park
Sales office Belgium-Luxembourg
Kadaka tee 3 Mountrath Road
Romeinsestraat 6/0101
EST-10621 Tallinn IRL-Portlaoise, Co. Laois
Research Park Haasrode
Phone +372 / 655 / 6978 Phone +353 / 57 86 / 643 43
B-3001 Heverlee-Leuven
Fax +372 / 655 / 6979 Fax +353 / 57 86 / 643 46
Phone +32 / 16 / 39 62 00
sales@ie.ebmpapst.com
Fax +32 / 16 / 39 62 20 Finland
www.ebmpapst.ie
info@vibobenelux.com ebm-papst Oy
Puistotie 1 Italy
EC-SYSTEMS
www.vibobenelux.com
FIN-02760 Espoo ebm-papst Srl
Bulgaria
Phone +358 / 9 / 88 70 22 0 Via Cornaggia 108
ebm-papst Romania S.R.L.
Fax +358 / 9 / 88 70 22 13 I-22076 Mozzate (Co)
Str. Tirnavei Nr. 20
mailbox@ebmpapst.fi Phone +39 / 03 31 / 83 62 01
RO-500327 Brasov
www.ebmpapst.fi Fax +39 / 03 31 / 82 15 10
Phone +40 / 268 / 312 805
info@it.ebmpapst.com
Fax +40 / 268 / 312 805 France
www.ebmpapst.it
dudasludovic@xnet.ro ebm-papst SARL
ZI Nord - rue A. Mohler Macedonia
Accessories
Croatia
BP 62 ebm-papst Industries Kft.
ebm-papst Industries Kft.
F-67212 Obernai-Cedex Mátyás u. 1/A
Mátyás u. 1/A
Phone +33 / 820 326 266 H-2220 Vecsés
H-2220 Vecsés
Fax +33 / 3 / 88 67 38 83 Phone +36 / 29 / 55 01 90
Phone +36 / 29 / 55 01 90
info@ebmpapst.fr Fax +36 / 29 / 55 01 94
Fax +36 / 29 / 55 01 94
www.ebmpapst.fr office@hu.ebmpapst.com
office@hu.ebmpapst.com
www.ebmpapst.hu
www.ebmpapst.hu Greece
Helcoma Netherlands
Technology
Cyprus
Th. Rotas & Co OE VIBO Benelux B. V.
MATERO LTD
Davaki 65 Engelseweg 127
37, St. Kyriakides Avenue
GR-17672 Kallithea-Attiki Postbus 230
P.O. Box 51744
Phone +30 / 210 / 951 37 05 NL-5705 AC Helmond
CY-3080 Limassol
Fax +30 / 210 / 951 34 90 Phone +31 / 4 92 / 50 29 00
Phone +357 / 25 / 87 00 30
contact@helcoma.gr Fax +31 / 4 92 / 50 29 50
Fax +357 / 25 / 38 13 66
www.helcoma.gr verkoop@vibobenelux.com
matero@cytanet.com.cy
www.vibobenelux.com
www.matero.com.cy
Contacts
611
fan agent
motor agent
612
information
General
AC centrifugal,
backward
AC centrifugal,
forward
America USA Africa
EC centrifugal,
ebm-papst Inc.
Argentinia South Africa
backward
P.O. Box 4009
ebm-papst de Argentina S.A. ebm-papst South Africa (Pty) Ltd.
100 Hyde Road
Hernandarias 148 Lomas del Mirador P.O. Box 3124
USA-Farmington, CT 06034
Pcia. de Buenos Aires (1752) 1119 Yacht Avenue
Phone +1 / 860 / 674 15 15
Phone +54 / 11 46 57 61 35 ZA-2040 Honeydew
Fax +1 / 860 / 674 85 36
Fax +54 / 11 46 57 20 92 Phone +27 / 11 / 794 34 34
sales@us.ebmpapst.com
ventas@ar.ebmpapst.com Fax +27 / 11 / 794 50 20
EC centrifugal, back-
info@za.ebmpapst.com
Brasil
ebm-papst Automotive & Drives, Inc. www.ebmpapst.co.za
ebm-papst Motores Ventiladores Ltda.
3200 Greenfield, Suite 255
Rua Francisco D´Amico, 155
USA-Dearborn, MI 48120
Bairro Pirajussara
Phone +1 / 313 / 406 80 80
BR-06785-290 Taboão da Serra-SP
Fax +1 / 313 / 406 80 81
Phone +55 /11 / 41 38 50 90
automotive@us.ebmpapst.com
Fax +55 /11 / 41 38 50 86
www.ebmpapst-automotive.us
vendas@br.ebmpapst.com
www.ebmpapst.com.br
EC centrifugal,
Canada
forward
ebm-papst Canada Inc.
1800 Ironstone Manor, Unit 2
CDN-Pickering, Ontario, L1W3J9
Phone +1 / 905 / 420 / 35 33
Fax +1 / 905 / 420 / 37 72
sales@ca.ebmpapst.com
www.ebmpapst.ca
EC-SYSTEMS
Mexico
ebm Industrial S.de R.L. de C.V.
Paseo de Tamarindos 400-A-5to Piso
Col. Bosques de las Lomas
MEX-Mexico 05120, D.F.
Phone +52 / 55 / 50 91 44 44
Fax +52 / 55 / 50 91 44 43
sales@mx.ebmpapst.com
www.ebmpapst.com.mx
Accessories
Technology
Contacts
613
fan agent
motor agent
614 615
fan agent
motor agent
614 615
37777-7-8811 • KO-08/07-12’
Printed in Germany
version 07
Centrifugal fans and blowers
version 07
Centrifugal fans and blowers
ebm-papst ebm-papst ebm-papst
Mulfingen GmbH & Co. KG St.Georgen GmbH & Co. KG Landshut GmbH
www.ebmpapst.com