Professional Documents
Culture Documents
Cost-reducing Product
Improvement
Simply put, you just add a highly qualified Parker
systems engineer to your project team, thereby taking
advantage of all the knowledge and experience
that we have built up during decades of providing
total systems solutions to discerning clients world-
wide. Our objectives are to help you utilize Parker
components in a way that offers improved systems
performance – and hence a more competitive product
– at a reduced total cost.
A Focused Organisation
The Mobile Systems Team work together with
our Sales companies and Product Divisions on
developing system proposals and solutions to
match the customers needs – today as well as in the
future. The focused organisation makes Parker the
most competent partner when developing a new
generation of machines.
The Product Divisions are focused on developing
and producing competitive components. Parker’s
broad product range gives the Mobile Systems Team
an unparalleled capability to optimise systems for
our customers. Together with the support from local
sales companies, we are well equipped to provide
a truly Premier Customer Service.
System Proposals
Our long and solid experience is
at your service when engineering
your mobile hydraulics system.
We will be your partner in
matching Parker components
into a superior hydraulic system,
giving your machine optimal
performance at a low total cost.
Training
Parker Mobile Systems Team
gives regular open courses in
basic hydraulics and electronics
for mobile machines. When
supplying total systems, we of
course also offer specific training
related to the system and the
components included.
Documentation Function
Assistance Development
Systems Engineering works
When selecting Parker as your
continuously in close co-
partner in mobile hydraulics
operation with Parker product
systems development, our
divisions in developing the
systems engineers will offer
real life performance of our
documentation on systems and
components even further,
components during the course
to meet and exceed future
of the project, in order to support
demands. At our dedicated
your own development of service
Systems Engineering Centre, all
and spare parts documentation
components are subject
for the total system.
to rigorous, realistic testing to
provide you with well-proven
Commissioning high-performing solutions.
Our Systems Engineers will
support you not only in
engineering your mobile
Products to Match
hydraulics system, but also when the Applications
commissioning the prototype To be able to continue to be your
and developing the system systems partner in machine
performance to match the target development, we are focusing
specifications for your machine. our R&D resources on
developing new and improved
products that will add more
and more value to your future
machines.
Product Solutions
Dedicated products and solutions
for different applications. Our
product offering for reach stacker
applications is shown below, with
similar products available for the
applications opposite.
zb 01
CD file includes system solutions for
applications pictured on page 7.
Manifolds
Cartridge Valves
Fluid Connectors
Pumps
Remote
Controls
Motors
Accumulators
Directional
Control Valves
Filter
Reach Stacker
10
11
Gear
PGP 500, 600
Motors
• Superior performance
• High efficiency
• Low noise operation at high
operating pressures
• International mounts and con-
nections
• Integrated valve capabilities
• Common inlet multiple pump
configurations
Valves
zp 44
Frame size PGP 505 0030 0040 0060 0080 0100 0120
Displacement (cm3/rev) 3 4 6 8 10 12
Max cont pressure (bar) 275 275 275 275 250 220
Actuators
Max operating speed (rpm) 4000 4000 3600 3000 2800 2400
Input power (kW) 2.3 3.0 4.5 6.0 6.9 7.5
Weight (kg) 2.22 2.27 2.38 2.48 2.58 2.68
Frame size PGP 511 0060 0080 0100 0110 0140 0160 0190 0230 0270 0310 0330
Displacement (cm3/rev) 6 8 10 11 14 16 19 23 27 31 33
Max cont pressure (bar) 250 250 250 250 250 250 250 225 190 165 155
Accumulators
Max operating speed (rpm) 3500 3500 3500 3500 3500 3500 3250 2750 2350 2100 2000
Input power (kW) 4.5 6.0 7.5 8.3 10.5 12.0 14.3 14.7 14.9 16.7 17.3
Weight (kg) 3.40 3.47 3.55 3.57 3.71 3.79 3.91 4.06 4.21 4.37 4.45
Frame size PGP 517 0140 0160 0190 0230 0250 0280 0330 0380 0440 0520 0700
Displacement (cm3/rev) 14 16 19 23 25 28 33 38 44 52 70
Max cont pressure (bar) 250 250 250 250 250 250 250 250 220 200 160
Max operating speed (rpm) 3400 3400 3300 3300 3100 3100 3000 3000 2800 2700 2400
Filtration
Input power (kW) 9.6 11.0 13.1 15.8 17.2 19.3 22.7 26.1 27.0 28.6 31.2
Weight (kg) 7.92 8.00 8.12 8.29 8.37 8.50 8.70 8.91 9.16 9.49 10.24
Frame size PGP 620 0160 0190 0210 0230 0260 0290 0330 0360 0410 0440 0460 0500 0520
Displacement (cm3/rev) 16.0 19.0 21.0 23.0 26.0 29.0 33.0 36.0 41.0 44.0 46.0 50.0 52.0
Max cont pressure (bar) 275 275 275 275 275 275 275 250 220 210 210 210 210
Max operating speed [rpm] 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3000 3000
Weight (kg) 12.0 12.1 12.1 12.2 12.3 12.6 12.7 12.8 13.0 13.1 13.2 13.3 13.4
Analysis
Fluid
Frame size PGP 640 0300 0350 0400 0450 0500 0550 0600 0650 0700 0750 0800
Displacement (cm3/rev) 30.0 35.0 40.0 45.0 50.0 55.0 60.0 65.0 70.0 75.0 80.0
Max cont pressure (bar) 310 310 310 310 310 310 290 265 245 225 210
Max operating speed [rpm 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000
Weight (kg) 21.0 21.0 22.0 22.0 23.0 23.0 24.0 24.0 25.0 25.0 25.0
Hydraulics
Compact
Connectors
Fluid
12
Gear
GPA
Motors
• Low noise
• High efficiency
• Bi-rotational
• Compact design
• Low weight / Aluminium body
• Pressure and suction connection in the rear and on the side
Valves
zp 45
Frame Size GPA 008 012 016 019
Displacement (cm3/rev) 8 12 16 19
Max cont pressure (bar) 250 250 250 230
Max operating speed (rpm) 2000 2000 2000 2000
Weight (kg) 4.6 4.8 5.1 5.3
Actuators
GP1
• Low noise
• High efficiency
• Bi-rotational
• Exceptional durability
• Compact design
Accumulators
• Low weight
• Pressure and suction connection in the rear or on the side
zp 47
Frame Size GP1 016 019 023 029 036 041 046
Displacement (cm3/rev) 16 19 23 29 36 41 46
Max cont pressure (bar) 270 260 250 240 230 210 200
Max operating speed (rpm) 2000 2000 2000 2000 2000 2000 2000
Filtration
Weight (kg) 6.0 6.3 6.7 7.1 7.5 7.8 8.1
Analysis
Fluid
Hydraulics
Compact
Connectors
Fluid
13
Single • 275 bar max pressure for T6CM. 240 bar for T6DM & T6EM
• Silent technology even under high pressure
• Wide range of displacements
Motors
Max operating speed1 (rpm) 3500 3500 3400 3400 3300 3300 3200 3200
Input power2 (kW) 3.3 5.8 7.2 9.2 11.5 13.9 15.7 17.5
Weight (kg) 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0
Frame size T6CM B03 B05 B06 B08 B10 B12 B14 B17 B20 B22 B25 B28 B31
Displacement (cm3/rev) 10.8 17.2 21.3 26.4 34.1 37.1 46.0 58.3 63.8 70.3 79.3 88.8 100.0
Max cont pressure (bar) 240 240 240 240 240 240 240 240 240 240 240 160 160
Actuators
Max operating speed1 (rpm) 2800 2800 2800 2800 2800 2800 2800 2800 2800 2800 2500 2500 2500
Input power2 (kW) 5.33) 12.2 14.7 17.7 22.3 24.1 29.5 36.9 40.2 44.1 49.5 48.54) 54.44)
Weight (kg) 15.7 15.7 15.7 15.7 15.7 15.7 15.7 15.7 15.7 15.7 15.7 15.7 15.7
Frame size T6DM B14 B17 B20 B24 B28 B31 B35 B38 B42 B45 B50
Displacement (cm3/rev) 47.6 58.2 66.0 79.5 89.7 98.3 111.0 120.3 136.0 145.7 158.0
Max cont pressure (bar) 210 210 210 210 210 210 210 210 210 210 160
Accumulators
Max operating speed1 (rpm) 2500 2500 2500 2500 2500 2500 2500 2500 2200 2200 2200
Input power2 (kW) 30.6 37.0 41.7 49.8 55.9 61.0 68.7 74.3 83.7 89.5 85.04)
Weight (kg) 24.0 24.0 24.0 24.0 24.0 24.0 24.0 24.0 24.0 24.0 24.0
Frame size T6EM 042 045 050 052 054 057 062 066 072
Displacement (cm3/rev) 132.3 142.4 158.5 164.8 171.0 183.3 196.7 213.3 227.1
Max cont pressure (bar) 210 210 210 210 210 210 210 210 210
Max operating speed1 (rpm) 2200 2200 2200 2200 2200 2200 2200 2200 2200
Filtration
Input power2 (kW) 82.6 88.7 98.3 102.1 105.8 113.2 121.3 131.2 139.5
Weight (kg) 43.3 43.3 43.3 43.3 43.3 43.3 43.3 43.3 43.3
1) Shaft speed for petroleum based fluids. For higher speeds. please contact Parker
2) 1500 rpm at 240 bar (except TB at 175 bar) 3) 140 bar 4) 210 bar max
Triple
• Very low noise
• Single common inlet
• 128 porting orientations available
• 6766 displacement combinations (from 10.8 to 227.1 cm3/rev) with a
max displacement of 552 cm3/rev
• One piece shaft (no internal torque limitation)
• High power to weight ratio
Connectors
14
Motors
• Flexibility in the porting
• Two pilot options = 4 bolts Ø 80.0 or 3 bolts Ø 52.0
• Maximum working pressure 275 bar
• Double pump available (T6GCC)
zvp 01
Frame size T6GC - T6ZC B03 B05 B06 B08 B10 B12 B14 B17 B20 B22 B25 B28 B31
Valves
Displacement (cm3/rev) 10.8 17.2 21.3 26.4 34.1 37.1 46.0 58.3 63.8 70.3 79.3 88.8 100.0
Max cont pressure (bar) 240 240 240 240 240 240 240 240 240 240 240 160 160
Max operating speed1 (rpm) 2800 2800 2800 2800 2800 2800 2800 2800 2800 2800 2500 2500 2500
Max input power2 (kW) - 12.2 14.7 17.7 22.3 24.1 29.5 36.9 40.2 44.1 49.5 48.5 54.4
Weight (kg) T6GC = 18.0 T6ZC = 14.0 T6GCC = 27.2
1) Shaft speed for petroleum based fluids. For higher speeds, please contact Parker Denison
2) 1500 rpm at 240 bar
Actuators
Vane – Cardan Shaft
Double – T6CCZ
Accumulators
• High radial & axial loads capabilities
• 3 different keyed shafts available
• One inlet
• Displacements = on P1 from 10 to 100 cm3/rev & P2 from 10 to
100 cm3/rev
• Pressure: up to 275 bar on P1 & P2
Filtration
Axial Piston & Fixed Vane Combination
Double & Triple
• Variable piston & vane pump combination
• Wide range of displacements:
– Variable piston unit of 42 cm3/rev (SAE B) or 62 cm3/rev (SAE C)
– Vane unit from 6 cm3/rev to 158 cm3/rev
• One inlet, one shaft (no internal torque limitations) Analysis
Fluid
• Pressure controls (standard, ventable & ventable by electronic valve,
load sensing)
• Very compact unit
• Splined & keyed shafts available
• 10 frame size available
Hydraulics
Compact
Connectors
Fluid
15
• Low weight
• Bi-directional
• Volumetric efficiency 98 %
• Also SAE-B available sizes 25 up to 61
zp 16
Frame size F1 25 41 51 61 81 101
Displacement (cm3/rev) 25.6 40.9 51.1 59.5 81.6 102.9
Valves
Max cont pressure (bar) 350 350 350 350 350 350
Max operating speed* (rpm) 2700 2700 2700 2700 2300 2300
Max operating speed** (rpm) 2600 2400 2200 2200 2000 1800
Input torque at 350 bar (Nm) 142 227 284 331 453 572
Max cont input power (kW) 31 46 52 61 76 86
Weight (kg) 8.5 8.5 8.5 8.5 12.5 12.5
* Unloaded pump (BPV) ** In service 350 bar
Actuators
F2
• Twin Flow / Dual displacement
• High power capability
• High shaft speed
• Easy to install
• Smart System Solutions
Accumulators
• Proven reliability
zp 16
Frame size F2 42/42 55/28 53/53 70/35 70/70
Displacement (cm3/rev) 43/41 54/52 55/28 69/36 68/68
Max cont pressure (bar) 350 350 350 350 300
Max operating speed* (rpm) 2550 2550 2550 2550 2550
Max operating speed** (rpm) 1800 1800 1800 1800 1650
Filtration
Input torque at 350 bar (Nm) 467 461 589 583 648
Max cont input power (kW) 88 88 110 110 112
Weight (kg) 19 19 19 19 19
* Unloaded pump (BPV) ** In service 350 bar
T1
• Pressures up to 350 bar
Analysis
Fluid
zp 16
Frame size T1 51 81 121
Hydraulics
Compact
16
Motors
• Good resistance to vibrations and temperature shocks
• Proven reliability
• Easy to service
• CETOP, ISO and SAE versions available
zp 21
Frame size* F11 05 10 12 14 19 150 250
Valves
Displacement (cm3/rev) 4.9 9.8 12.5 14.3 19.0 150.0 242.0
Max cont pressure (bar) 350 350 350 350 350 350 350
Max operating speed ( rpm) 4600 4200 4000 3900 3500 1700 1500
Weight (kg) 5 7.5 8.2 8.3 11 70 77
* Use F12 for medium range displacement
F12
• Pressures up to 480 bar
Actuators
• Very high power capability
• High overall efficiency
• Small envelope size
• ISO, SAE and cartridge versions available
• Proven reliability
• Easy to service
zp 21
Accumulators
Frame size F12 30 40 60 80 90 110 125
Displacement (cm3/rev) 30.0 40.0 59.8 80.4 93.0 110.1 125
Max cont pressure (bar) 420 420 420 420 350 420 420
Max operating speed ( rpm) 3150 2870 2500 2300 2300 2200 2100
Weight (kg) 12 16.5 21 26 26 36 36
Boost Unit
Filtration
BLA The boost unit provides filtration and make-up fluid to replace pump
and motor volumetric losses, while maintaining sufficient pump inlet
pressure to avoid cavitation. The semi-closed system could be built
with a smaller and lighter reservoir at the same time as, the pump
speed is possible to increase.The Boost Units BLA are available in two
different sizes:
BLA 4 for flow 25–160 litres per minute,
Analysis
Fluid
BLA 6 for flow 150–400 litres per minute. Hydraulics
Compact
7. Reservoir
Fluid
17
• Quiet operation
• Reduced flow and pressure ripple
• Easy to install
• Service friendly
zp 18
Frame size P2 060 075 105 145 P3 105 145
Displacement (cm3/rev) 60 75 105 145 105 145
Accumulators
Max cont pressure (bar) 320 320 320 320 320 320
Max operating speed (rpm) 2800 2500 2300 2200 2600 2500
Weight (kg) 37 44 63 78 62 76
Input power (kW) 15.5 19.5 22.5 24.5 31 39 45 61.5 78 89.5 136 175 263
Fluid
P1
• Compact overall package size for easy installation
• Quiet operation
• High flexibility by various thru drive and remote control options
• Easy to service
Hydraulics
Compact
zp 04
Frame size P1 060 075 100 140
Displacement (cm3/rev) 60 75 100 140
Max cont pressure (bar) 280 280 280 280
Max operating speed (rpm) 2400 2300 2100 2000
Connectors
Weight (kg) 30 31 55 67
Fluid
18
Gear
Motors
PGM 500, 600
• Superior performance
• High efficiency
• Low noise operation at high
operating pressures
• International mounts and con-
nections
• Integrated valve capabilities
Valves
• Common inlet multiple pump
configurations
zp 44
Frame size PGM 511 0060 0080 0100 0110 0140 0160 0190 0230 0270 0310 0330
Displacement (cm3/rev) 6 8 10 11 14 16 19 23 27 31 33
Actuators
Max cont pressure (bar) 250 250 250 250 250 250 250 225 190 165 155
Max operating speed (rpm) 3500 3500 3500 3500 3500 3500 3250 2750 2350 2100 2000
Input power (kW) 4.5 6.0 7.5 8.3 10.5 12.0 14.3 14.7 14.9 16.7 17.3
Weight (kg) 3.40 3.47 3.55 3.57 3.71 3.79 3.91 4.06 4.21 4.37 4.45
Frame size PGM 620 0160 0190 0210 0230 0260 0290 0330 0360 0410 0440 0460 0500 0520
Accumulators
Displacement (cm3/rev) 16.0 19.0 21.0 23.0 26.0 29.0 33.0 36.0 41.0 44.0 46.0 50.0 52.0
Max cont pressure (bar) 275 275 275 275 275 275 275 250 220 210 210 210 210
Max operating speed [rpm] 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3000 3000
Weight (kg) 12.0 12.1 12.1 12.2 12.3 12.6 12.7 12.8 13.0 13.1 13.2 13.3 13.4
Frame size PGM 640 0300 0350 0400 0450 0500 0550 0600 0650 0700 0750 0800
Displacement (cm3/rev) 30.0 35.0 40.0 45.0 50.0 55.0 60.0 65.0 70.0 75.0 80.0
Max cont pressure (bar) 310 310 310 310 310 310 290 265 245 225 210
Max operating speed [rpm 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000
Filtration
Weight (kg) 21.0 21.0 22.0 22.0 23.0 23.0 24.0 24.0 25.0 25.0 25.0
Analysis
Fluid
Hydraulics
Compact
Connectors
Fluid
19
zvp 01
Frame size M3B 009 012 018 027 036
Displacement (cm3/rev) 9.2 12.3 18.5 27.8 37.1
Max cont pressure (bar) 175 210 210 210 210
Valves
Frame size M4C 024 027 031 043 055 067 075
Displacement (cm3/rev) 24.4 28.2 34.5 46.5 58.8 71.1 80.1
Actuators
Max cont pressure (bar) 230 230 230 230 210 210 175
Max operating speed1 (rpm) 2500 2500 2500 2500 2500 2500 2500
Output torque2 (Nm) 60.5 70.0 86.8 120.0 149.0 170.0 198.0
Output power2 (kW) 12.7 14.7 18.0 25.1 31.2 35.6 41.5
Weight (kg) 15.4 15.4 15.4 15.4 15.4 15.4 15.4
Frame size M4D 062 074 088 102 113 128 138
Accumulators
Frame size M5B* 012 018 023 028 036 045 050
Analysis
Fluid
2) Output at 2000 rpm, 24 cSt & M5B* at 320 bar, 045 & 050 at 280 bar, M3B & M4* at 175 bar
Double
• 49 possible displacement combinations (see above M4C & M4D data)
• Three different possible speeds for each combination
• Three different possible torques for each combination
• Bi-rotational technology
• Low noise
Connectors
20
Motors
• Low noise
• Bi-rotational technology
• Internal or external drain possible with the uni-rotational option
zvp 01
Frame size M5AF 006 010 012 016 018 025 M5BF 012 018 023 028 036 045 050
Displacement (cm3/rev) 6.3 10.0 12.5 16.0 18.0 25.0 12.0 18.0 23.0 28.0 36.0 45.0 50.0
Valves
Max cont pressure (bar) 300 300 300 300 300 280 290 290 290 290 290 260 260
Max operating speed1 (rpm) 4000 4000 4000 4000 4000 2500 4000 4000 3000 3000 3000 2500 2500
Max output torque2 (Nm) 26.1 43.8 55.7 72.4 82.0 107.5 50.6 81.2 117.1 132.1 172.8 190.0 211.0
Output power2 (kW) 5.5 9.1 11.7 15.1 17.1 22.5 10.6 17.0 24.5 27.7 36.2 39.8 44.0
Weight (kg) 15.0 15.0 15.0 15.0 15.0 15.0 18.5 18.5 18.5 18.5 18.5 18.5 18.5
1) Max shaft speed at max pressure 2) Output at 2000 rpm, 24 cSt & M5B* at 320 bar, 045 & 050 at 280 bar, M5AF at 300 bar
Actuators
Gerotor
• High volumetric efficiency
TE • Long life
• Full flow spline cooling
• High pressure shaft seal
Accumulators
• High flow shaft seal cooling
• High starting torque
• High side load capacity
• Balanced performance in both directions of rotation
zm 03
Frame size TE 0036 0045 0050 0065 0080 0100 0130 0165 0195 0230 0260 0295
Displacement (cm3/rev) 36 41 49 65 82 98 130 163 195 228 260 293
Max cont pressure (bar) 140 140 140 140 140 140 140 140 140 120 110 100
Max operating speed (rpm) 1141 1024 1020 877 695 582 438 348 292 328 287 256
Filtration
Max cont output torque (Nm) 55 71 90 125 160 190 255 310 390 380 400 428
Weight. code L and H (kg) 6.7 6.8 6.9 7.0 7.1 7.2 7.6 7.8 8.1 8.3 8.6 8.8
Frame size TE 0330 0365 0390
Displacement (cm3/rev) 328 370 392
Max cont pressure (bar) 100 95 85
Max operating speed (rpm) 228 203 191
Max cont output torque (Nm) 443 467 445
Weight. code L and H (kg) 9.1 9.4 9.6
Analysis
Fluid
zm 05
Frame size TF 0080 0100 0130 0140 0170 0195 0240 0280 0360 0405 0475
Displacement (cm3/rev) 81 100 128 141 169 197 238 280 364 405 477
Max cont pressure (bar) 207 155 138 138 138 138 138 138 130 128 113
Max operating speed (rpm) 693 749 583 530 444 381 394 334 258 231 195
Max cont output torque (Nm) 220 195 230 255 315 365 425 510 595 655 680
Weight code H and V (kg) 14.0 14.0 14.2 14.3 14.6 14.9 15.3 15.6 16.3 17.0 17.5
Connectors
Fluid
21
Max cont output torque (Nm) 390 475 555 675 795 924 965 940 885 980 985 1045 775
Weight code H and V (kg) 14.6 14.8 15.1 15.5 15.9 16.1 16.3 16.9 17.5 18.3 19.0 20.5 22.2
Max cont output torque (Nm) 390 475 555 675 795 924 965 940 885 980 985 1045 775
Brake holding capacity (Nm) 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000
Weight (kg) 14.6 14.8 15.1 15.5 15.9 16.1 16.3 16.9 17.5 18.3 19.0 20.5 22.2
Weight code B.X.L.A.Y. (kg) 16.9 17.2 17.4 17.8 18.2 18.4 18.6 19.2 19.8 20.6 21.3 22.9 24.5
• Long life
Compact
zm 08
Frame size TK 0250 0315 0400 0500 0630 0800 1000
Displacement (cm3/rev) 250 315 400 500 630 800 1000
Max cont pressure (bar) 241 241 207 207 207 190 172
Max operating speed (rpm) 523 413 373 298 237 276 218
Max cont output torque (Nm) 814 1029 1153 1439 1617 1916 2413
Weight (kg) 30.8 31.4 32.3 33.2 34.5 36.0 37.9
Connectors
Fluid
22
Motors
• Shaft end and mounting flange meet the ISO standard for all sizes
• Very low weight
• High overall efficiency withstand high acceleration
zp 16
Frame size F1 25-M 41-M 51-M 61-M 81-M 101-M 121-M
Displacement (cm3/rev) 25.6 40.9 51.1 59.5 81.6 102.9 118.5
Valves
Max cont pressure (bar) 250 250 250 250 250 250 250
Max operating speed (rpm) 3000 2700 2400 2200 2000 1800 1700
Output torque at 200 bar (Nm) 81 130 162 189 259 327 376
Output power (kW) 20 27 31 34 41 48 51
Weight (kg) 8.5 8.5 8.5 8.5 12.5 12.5 12.5
F11
• Very high operating speeds and fast accelerations
Actuators
• Anti cavitation valve available
• Pressures up to 420 bar
• High overall efficiency (low losses)
• Accept high external shaft loads
• Good resistance to vibrations and temperature shocks
• Proven reliability
• Easy to service
Accumulators
• CETOP, ISO and SAE versions available
zp 21
Frame size* F11 05 10 12 14 19 150 250
Displacement (cm3/rev) 4.9 9.8 12.5 14.3 19.0 150.0 242.0
Max cont pressure (bar) 350 350 350 350 350 350 350
Max operating speed (rpm) 12800 10200 9400 9000 8100 3200 2700
Output torque at 100 bar (Nm) 7.8 15.6 19.8 22.7 30.2 238 384
Weight (kg) 5 7.5 8.2 8.3 11 70 77
* Use F12 for medium range displacement
Filtration
• Very high operating speeds and fast accelerations
F12 • Pressures up to 480 bar
• High starting torque
• Very high power capability
• High overall efficiency
• Small envelope size
• Accessory valves available
• ISO, SAE and cartridge versions available
• Proven reliability Analysis
Fluid
• Easy to service
• Super-shockless swing relief valve
zp 21
Frame size F12 30 40 60 80 90 110 125
Displacement (cm3/rev) 30.0 40.0 59.8 80.4 93.0 110.1 125
Max cont pressure (bar) 420 420 420 420 350 420 420
Max operating speed (rpm) 6700 6100 5300 4800 4600 4400 4200
Hydraulics
Compact
Output torque at 100 bar (Nm) 47.6 63.5 94.9 128 148 175 198
Weight (kg) 12 16,5 21 26 26 36 36
Connectors
Fluid
23
90 % to 95 % of theoretical
• High control at very low speed
• High volumetric efficiency: up to 98 %
• Low noise
• Resistance to thermal shocks
• Reversibility
• Long bearing life
• Speed accessories, brakes….
Valves
zm 30
Frame size MR 33 57 73 93 110 125 160 190 200 250 300 350 450 600 700 1100
Displacement (cm3/rev) 32 56 73 93 109 125 160 192 199 251 304 350 452 608 707 1126
Max cont pressure (bar) 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250
Actuators
Max operating speed (rpm) 1400 1300 1200 1150 1100 900 900 850 800 800 750 640 600 520 500 330
Max power (kW) 10 17 20 25 28 25 30 36 38 48 53 62 75 84 97 119
Frame size MR 1600 1800 2400 2800 3600 4500 6500 7000
Displacement (cm3/rev) 1598 1810 2393 2792 3637 4503 6460 6967
Max cont pressure (bar) 250 250 250 250 250 250 250 250
Max operating speed (rpm) 260 250 220 215 180 170 130 130
Accumulators
Max power (kW) 144 153 183 194 185 210 240 250
Frame size MRE 330 500 800 1400 2100 3100 5400 8200
Displacement (cm3/rev) 332 498 804 1370 2091 3104 5401 8226
Max cont pressure (bar) 210 210 210 210 210 210 210 210
Max operating speed (rpm) 750 600 450 280 250 215 160 120
Max power (kW) 49 70 93 102 148 190 210 250
Filtration
Frame size MRD 300 450 700 1100 1800 2800 4500 7000
Displacement (cm3/rev) 304 452 707 1126 1810 2792 4503 6967
Max cont pressure (bar) 250 250 250 250 250 250 250 250
Max operating speed (rpm) 750 600 500 330 250 215 170 130
Max power (kW) 53 75 97 119 157 194 210 250
Frame size MRDE 330 500 800 1400 2100 3100 5400 8200
Displacement (cm3/rev) 332 498 804 1370 2091 3104 5401 8226
Analysis
Max cont pressure (bar) 210 210 210 210 210 210 210 210
Fluid
Max operating speed (rpm) 750 600 450 280 250 215 160 120
Max power (kW) 49 70 93 102 148 190 210 250
Frame size MRT 7100 9000 14000 17000 19500 MRTE 8500 10800 16500 20000 23000
Displacement (cm3/rev) 7104 9005 14010 16759 19508 8517 10802 16543 19788 23034
Max cont pressure (bar) 250 250 250 250 250 210 210 210 210 210
Hydraulics
Compact
24
Motors
• High starting torque
• Low weight
• High overall efficiency
• Axial or side ports
• Two-position control
• Cartridge version available
• Service-friendly zm 22
Frame size T12 60 80
Valves
Displacement max at 35° (cm3/rev) 60 80
Displacement min at 10° (cm3/rev) 18 24
Max continuous pressure (bar) 420 420
Max operating speed (rpm) 7000 6250
Corner power cont (kW) 235 280
Weight (kg) 26 30.5
Actuators
• Very high operating speeds
• Displacement ratio 5:1
V12
• Pressures up to 480 bar
• Very high power capability
• High starting torque
• Low weight
• High overall efficiency
• Axial or side ports
Accumulators
• Controls available for most needs
• ISO, SAE and cartridge versions
zm 21
Frame size V12 60 80
Displacement max at 35° (cm3/rev) 60 80
Displacement min at 6.5° (cm3/rev) 12 16
Max cont pressure (bar) 420 420
Max operating speed (rpm) 7000 6250
Filtration
Corner power cont (kW) 235 280
Weight (kg) 28 33
Analysis
• Wide displacement range – 5:1 Fluid
• Small envelope size and high power-to-weight ratio
• Low noise levels due to the compact, sturdy design and smooth fluid
passages
• Positive piston locking, strong synchronizing shaft, heavy-duty bearings
and a small number of parts add up to a very robust motor with
long service life and proven reliability
Hydraulics
Compact
zm 20
Frame size V14 110 160
Displacement max at 35° (cm3/rev) 110 160
Displacement min at 6.5° (cm3/rev) 22 32
Max cont pressure (bar) 420 420
Max operating speed (rpm) 5700 5000
Corner power cont (kW) 440 560
Connectors
Weight (kg) 54 68
Fluid
25
Radial Piston
Motors
26
Open Centre Valves Open centre valves tend to be used most in applications requiring
Motors
simple, uncomplicated systems that are undemanding in terms of
Mobile Valves
operating characteristics. However, our considerable experience and
high-quality products mean that we can offer open centre valves
offering much more, especially in terms of operation. Our open
VO40 centre valves are used by several market leaders in the mechanical
engineering industry, which are extremely demanding in terms of
repeatability and precision of operation.
P70CF and F130CF are of modular construction. The H170CF is a
Valves
flangeable monoblock type meaning valve blocks can be flanged
together to form a valve package for either single or multi-pump
operation. The valves are designed for many different applications
and used extensively in machines such as lorry cranes, small wheel
loaders, concrete placing cranes, forestry machines, refuse trucks,
P70CF drill rigs, garbage trucks, container trucks, forklift trucks etc.
These valves can be equipped with a large number of optional
Actuators
components and assembles such as:
• Pump unloading with blocked pump channel for emergency stop
• Main pressure relief valve
• Port relief valves with or without anti cavitation function
• Anti cavitation valves
• Counter pressure valve
• Application adapted spools
Accumulators
F130CF • Pressure compensated spools
• Load hold check valve
• Power beyond feature
• For single or multi-pump operation
• For single or multi-valve operation
Filtration
H170CF
Analysis
Fluid
zv 01
Operation
Valve Pump Flow l/min Pressure bar Manual Pneumatic Hydraulic Electrohydraulic
VO40 40 300 X X X X
Hydraulics
P70CF 70 320 X X X X
Compact
27
Mobile Valves
P70CP Valves for constant pressure systems are mainly used where
operational characteristics are critical and energy consumption is not.
In these systems, simultaneous function operation is possible. Valves
for constant pressure can return an un-loading signal to the variable
pump when they are not in use.
Valves
zv 02
Accumulators
Operation
Valve Pump Flow l/min Pressure bar Manual Pneumatic Hydraulic Electrohydraulic
P70CP 90 320 X X X X
F130CP 150 320 X X X X
Filtration
Analysis
Fluid
Hydraulics
Compact
Connectors
Fluid
28
L90LS Valves for load sensing systems have the same operating
Motors
characteristics as valves for constant pressure systems, except that
the pressure in the motor port is sent as a signal either to a variable
load sensing pump or to a bypass in the inlet. Bypasses are used
with fixed displacement pumps. The load sensing system can be
used to achieve complex system structures, for example including
flow sharing, pressure compensation and pressure limitation in the
motor ports. Correctly used, the load sensing system can significantly
reduce energy consumption (heat generation) and therefore reduce
Valves
operating costs, primarily in systems with wide variations in loads
and operating times.
K170LS These valves can be equipped with a large number of optional
components and assembles such as:
• Options for variable or fixed displacement pumps
• Pump unloading with blocked pump channel for emergency stop
• For single or multi-pump operation
Actuators
• For single or multi-valve operation
• Flanged multi-valves, L90LS, K170LS, K220LS
• Counter pressure valve
• Pressure relief valve
• Port relief valves with or without anti cavitation function
• Anti cavitation valves
K220LS • Port specific feed reducers
• Application adapted spools
Accumulators
• Port specific force feedback
• Load check valve
• Sections with pressure compensators
Filtration
K + L Midinlet VP170 M200LS M400LS
Analysis
Fluid
zv 03
Operation
Valve Pump Flow l/min Pressure bar Manual Pneumatic Hydraulic Electrohydraulic
Hydraulics
Compact
29
D3W
Valves
zv 04
Operation
Accumulators
zv 05
Hydraulics
Compact
Operation
Valve Pump Flow l/min Pressure bar Solenoid Remarks
SMV6 11 210 X 3- and 4-way, 2 and 3 positions
Connectors
Fluid
30
Motors
linear or joystick lever versions of the VP04 are available.
Principal applications include the proportional remote control of
pneumatic spool-actuators and positioning cylinders in mobile
or industrial hydraulic systems. All connections are furnished with
couplings of the plug-in type.
Valves
zr 21
System Type Pneumatic Pilot Pressure
Control pressure range 0–8 bar
Control flow max 7 Nl/s
Control curves with straight characteristics X
Friction brake for retention in any position X
Mechanical end-position detent X
Actuators
Hydraulic
PCL4 The PCL4 is a hydraulic pilot valve for the proportional remote control
of directional control valves, pumps, motors, etc. It is available with
joystick lever-units, as well as linear units for hand or foot control.
The PCL4 is intended primarily for the remote control of hydraulically
Accumulators
operated spool actuators and pump regulators in all kinds of mobile
and industrial applications.
zr 11
System Type Hydraulic Pilot Pressure
Control pressure range 1–75 bar
Filtration
Control flow max 15 l/min
Max supply pressure 100 bar
Individual control characteristics for each direction X
Selectable start and final pressures X
Selectable lever force X
Curves with straight characteristics X
Curves with two-step characteristics X
Curves with forced opening (final step) X
Analysis
Friction brake for retention in any position X Fluid
Mechanical or solenoid end position detent X
Electrohydraulic
PVC6 Series PVC6 is a bankable valve assembly used for remote control of
directional control valves. The proportional pressure reducing valve
creates a pressure proportional to the inlet current. Solenoid Coil
Hydraulics
Compact
zr 02
Connectors
Fluid
31
Mobility:
Hardware designed and tested for mobile hydraulic equipment.
Simplicity:
Implement complex machine functionality without specialized
programming knowledge.
Actuators
Time to Market:
IQAN’s simple programming environment and modular hardware
reduces development time.
Machine Management:
IQAN has the software tools to benefit the entire life cycle of a machine.
This allows you to reduce cost from design through after sales support.
Accumulators
Components
IQANdesign platform
An advanced expandable
modular control system with
software tools, IQAN Creative
Studios, to add modules
and build functionality and
simulation tools.
Filtration
zr 01
System Types IQANdesign platform
CANbus Master IQAN-MDL2, IQAN-MD3, IQAN-MC2
CANbus Modules IQAN-XA2, IQAN-XS2, IQAN-XT2
CANbus Joysticks IQAN-LL, IQAN-LM
Analysis
Fluid
32
Motors
Valves
Actuators
Directional Control Valves zv 40
HY15-3501/USA/EU
Accumulators
Manual valves 240 50
Manual three-way valves 240 25
Manual four-way valves 240 8
Pilot operated valves 240 40
Solenoid, poppet-type, two-way valves 345 265
Solenoid, poppet-type, bi-directional valves 345 20
Solenoid, spool-type, two-way valves 345 75
Solenoid, spool-type, three-way valves 345 65
Filtration
Solenoid, spool-type, four-way valves 345 30
Double solenoid, spool-type, four-way valves 345 25
33
zv 44
Valve Type Max Working Max Flow Flow Capacity
Pressure (bar) Setting (l/min) (l/min)
Needle valves 240 0–190
Rotary adjust needle valves 240 0–60
Flow divider/combiner valves 207 0–45
Pilot control flow control valves 207 0–60
Flow control valves 240 0–45
Analysis
compensated valves
Priority-type, pressure 240 0–40 0–60
compensated valves
Restrictive-type, pressure 240 0–60
compensated flow regulator valves
Priority-type, pressure 240 0–35 0–60
compensated flow regulator valves
Hydraulics
34
Motors
The valves have good pressure characteristics together with very short
reaction times. They are compact, tight, reliable and not sensitive to
contamination.
zv 21
Valve Type Max Working Max Setting Flow Capacity
Valves
Pressure bar Pressure bar l/min
Pressure relief valves 600 25-550 0-350
Auxiliary Valves
Parker’s stackable selector valve is operated by a wet pin solenoid. The
Actuators
valve is capable of switching from one circuit to another at a variety
of flows and pressures. If more than two circuits are to be controlled
then additional units can be stacked together. Alternatively, the valve
can be connected to a pump and used to direct the flow to either one
of two different circuits.
• Stackable
• Reduce pipe work
Accumulators
• Reduce number of fittings
• Reduce number of directional control valves spool sections
The pressure reducing valve is of three-way design.
• Compact
• Easy to adjust
• Factory set and sealed
The sequence valve is designed to open or close a hydraulic pilot
signal when it reaches a predetermined pressure level.
Filtration
• Compact
• Several pressure ranges available
• Can be factory set and sealed
The shuttle valve enables two signal flows in a hydraulic system to
be directed alternately into a common service line. The flow with the
highest pressure takes priority.
• Small dimensions
• Rapid switching
Analysis
• Negative overlapping Fluid
• Reacts on very small flows
• Minimal leakage
zv 21
Valve Type Max Working Flow Capacity
Pressure bar l/min
Hydraulics
35
• Fewer components
• Fewer leakage points
• Less space required
• Simplified assembly and
service instructions
• Complete system solution
with optimized functions
Manifold blocks can be flanged to one or more directional valves as
Valves
short lead times, the Parker ‘Speed Shop’ is the place to go. Parker’s
expert application engineers along with the latest computer-aided
design technology can bring advanced new custom products to
market faster. The solution to your problem is only minutes away
when Parker’s Quick Design proposals and quotes that are created
using 3D CAD. Once the design is finalized, the ‘Speed Shop’ process
is further streamlined by utilizing electronic communications and
approvals. When design specifications meet customer requirements,
Parker’s CAD linked prototype machining produces fully functional
Filtration
zv 23
Connectors
Fluid
36
Motors
Parker offers single- or double-acting single stage and telescopic
mobile cylinders. Custom cylinders can be built in batch sizes from
one piece to hundreds. We work with our customers to develop
specifications in a wide range of sizes, pressures and mounting styles.
Valves
• Seal compounds to suit all standard fluids
• A wide range of materials and coatings
– stainless steel
– electroless nickel
– nitriding
– chrome and double-chrome plating
• Options include
MWA/MWB & HC20 – loadholding valves
– electro-hydraulic transducers
Actuators
Single Stage Cylinder
– position switches
– end of stroke hydraulic damping
– protective rod boots
– flow controls
– flow fuses
Accumulators
Double-sided Steering Cylinder
zc 01, zc 03
Cylinder Cyl. Bore Pressure bar Max Stroke Load Holding Optional Seal Position Customized
Filtration
Ø mm mm Valves Types Switches Variants
MWA 50-200 250 4000 X V X X
MWB 32-200 160 4000 X X X X
HC20 25-200 160 2800 X X X X
zc 02
Connectors
Fluid
37
za 01
za 03
za 07
Analysis
za 01
Connectors
Fluid
38
Motors
In addition to the products highlighted here, a comprehensive
catalogue is available. Many of the Filtration products are designed to
ISO 14001 to meet Parker’s global environmental commitment.
Valves
• Tank mounted and in-tank models
• Integral indicator & breather options
Low Pressure
zf 01
Model Max Flow Max Mounting Style
Actuators
Rate (l/min) Pressure (bar)
Suction Return 250 10 Tank Top
ETF Series 140 6 Tank Top
Tank Topper 650 10 Tank Top
IN-AGB 2400 10 Inside Tank
BGT-S 2400 10 Tank Top
Maxiflow 360 10 Spin-On
Accumulators
TTF 500 10 Tank Top
Medium Pressure
• Various port options
• High capacity/high efficiency Microglass III and ‘e’ series, environmen-
tally friendly media options
• Cartridge style by-pass valve
Filtration
• Visual and electrical indicators with several connector styles
zf 02
Model Max. Flow Max Mounting Style
Rate (l/min) Pressure (bar)
CN Series 660 70 Inline
45 Series 250 40 Inline
130 ‘e’ Series 1000 30 Inline
Analysis
Fluid
zf 03
Model Max Flow Max Mounting Style
Rate (l/min) Pressure (bar)
100 P Series 1000 414 Inline
8 Series 520 414 Inline
70 Series 450 420 Inline
Connectors
39
Filtration
Portable Filtration Systems
zf 04
Reservoir Equipment
• Metallic and non-metallic breathers and filler breathers
Actuators
• Diffusers
• Fluid Level/temperature gauges
• Environmental air filters
• Spin-on breathers
• Suction strainers
Accumulators
zf 05
ParGel
Filtration
• Water removal elements filter free water from mineral-base and syn-
thetic fluids
• Fits many Parker filters and the Guardian filtration system
Analysis
zf 06
Fluid
ParFit
• Extensive range of competitively priced Parker quality replacement filter
elements for any filter brand
Hydraulics
Compact
www.parker.com/hfde
Connectors
Fluid
40
Motors
the field, on the production line or in the laboratory. Others will
recognize the manufacturing quality, its reliability, its potential for
reducing machine downtime, and its effective predictive maintenance
programs. Then there are those who find originality and innovation
irresistible qualities, that when combined, provide a fluid condition
monitor that will out-perform the rest.
Valves
• Instant, accurate results achieved with a 2 - minute test cycle
• Data entry allows individual equipment identification
• Data graphing selectable via the integral printer
• Handset auto-logging test sequence
• Datum data download software available
• Auto 300-test cycle logging via LCD handset input
• RS-232 serial port computer interface
• Worldwide service and technical support. There is an
Actuators
integral 16-column printer for hard copy data
zfa 03
Moisture Sensor Group
• Continuous, online moisture indication for hydraulic and lube systems
Accumulators
• A compact, real time solution to water contamination monitoring.
• MS150 - 10 bar max. reporting of % relative humidity of water content.
• MS200 - Programmable outputs provide user flexibility for this option.
• MS300 - Programmable and ATEX certification for this intrinsically safe
model offers fast, reliable and accurate detection of moisture in fluids
for use in hazardous areas.
zfa 02
Filtration
ASIC ‘Performer’ Transducers & Transmitters
• One-piece body and diaphragm machining ensures long-term product
stability
• All Stainless Steel construction
• 6 transducer pressure ratings, 0–5 V and 1–6 V outputs
• 7 transmitter pressure ratings – 2-wire 4–20 mA output
• Micro plug and M12 connector options
Analysis
Fluid
zfa 04
equipment for oil, water and air applications. Inline flow indicators
and precision monitors, flow transmitters, stainless steel flowmeters
for corrosive or chemical media and flow products designed for
arduous conditions.
zfa 05
Connectors
Fluid
41
zsc 01
Within the Parker Hannifin product range we can offer components for
a hydraulic operated power brake system. The brake system onboard
a vehicle is vital for the safety of the vehicle. It is therefore important
that the design of the vehicle and the design of the brake system are
Accumulators
zs 02
Hydraulics
Compact
42
Motors
• Fixed relief valve
• Locking check valves available on all models
• Variety of hydraulic circuits
• Reservoirs from 0.45 to 5.5 litres
• 241 bar rating zu 01
Series 165
Valves
• 0,75 kW, 12 VDC electric motor
• 3 pump sizes (0.52, 0.82 and 1.06 cm3/rev)
• Variety of circuits
• Many reservoir choices
• Up to 240 bar operating pressure
Actuators
• Soft seat load hold check valves
• Vertical or horizontal mounting
zu 06
Accumulators
Series 550
Filtration
zs 02
Analysis
Fluid
zu 03
Connectors
Fluid
43
Thermoplastic Hoses
Polyflex/Parflex
Motors
zfc 03
Catalogue 4460 and 4467 (PTA/PTB)
Accumulators
Polyflex Presto
Tubing for Pneumatics
zfc 02
Analysis
Catalogue 5210
Fluid
Hydraulics
Compact
Connectors
Fluid
44
Motors
and EO2-Form for soft sealed cold-formed tube connections. Gives
maximum safety even at extreme pressures, 500 hours corrosion
resistance against white rust.
Product range:
EO2-PLUS Series L from 6 to 42 mm tube o.d.
Series S from 6 to 38 mm tube o.d.
Valves
Material: steel.
Sealing material (EO2-Plus/EO2-Form): NBR/FPM.
Nominal pressure Pn: Series L up to 500 bar
Series S up to 800 bar.
Sizes 20S 38S: 420 bar.
EO2-FORM
Actuators
zfc 05
Catalogue 4100-8
Accumulators
Parker O-Lok
O-Ring Face Seal Fittings (ORFS)
Soft seal fittings provide leak-free connections for high pressure
hydraulic systems. Excellent where reliability, versatility and ease of
assembly are important factors. For rigid tubing and hoses.
Filtration
Material: steel and stainless steel, brass on request.
Sizes: tube o.d. 6 to 50 mm (1/4" to 2").
Port threads: BSPP, metric ISO 6149 and DIN 3852, UNF, NPTF.
Nominal pressure Pn: up to 630 bar.
Standards: ISO 8434-3, SAE J1453.
zfc 08
Analysis
Fluid
Triple-Lok Fittings Catalogue 4100-8
zfc 07
Catalogue 4100-8
Connectors
Fluid
45
Pneumatic Fittings
Prestolok 2
Motors
zfc 09
Catalogue 0093
Actuators
Prestomatic 2
Airbrake Fittings
Material: brass.
Accumulators
zfc 10
CD3530-2/UK
Filtration
Metrulok
Medium Pressure Brass Tube Fittings
Metrulok is a one-piece ready to use bite type fitting for use with
either copper or plastic tubing. The cutting ring is retained within the
nut. Metrulok fittings are reusable.
Material: brass.
Analysis
Fluid
zfc 11
Catalogue 0093
Connectors
Fluid
46
Agricultural Hydraulic
Motors
Quick couplings and multicoupler systems with ball locking
mechanism designed to satisfy many applications such as hydraulic
connection between implements and tractors, forestry equipment,
mowers and also road service vehicles. Most of the series meet the
ISO 7241-1-A standard and are widely interchangeable. They are
used by major manufacturers of tractors and agricultural equipment
worldwide.
Valves
Material: steel.
Sizes: from 1/4’’ to 1’’.
Threads: BSPP, NPTF, UNF and metric.
Rated pressure: up to 250 bar.
zfc 12
Catalogue 3800
Actuators
High Pressure
General purpose and screw-to-connect quick couplings for rock
breakers, hydraulic hammers, excavators... They combine the
advantages of high pressure up to 450 bar with well proven designs.
Material: steel.
Accumulators
Sizes: from 3/8’’ to 1.1/2’’.
Threads: BSPP, NPTF, NPSF, UN(F), metric.
Rated pressure: up to 450 bar.
zfc 13
Catalogue 3800
Filtration
Diagnostic
Diagnostic couplings provide easily accessible test points for
performance testing of hydraulic systems in plant or on mobile
vehicles. This early detection contributes to equipment efficiency
and long life. Parker PD & PDP series combine many advantages:
ISO 15171-1 & SAE J1502 conformity for wide interchangeability,
flat-faced poppet for reduced spillage, possibility to connect under
Analysis
pressure. Fluid
Material: steel.
Size: 1/8".
Threads: BSPP, NPTF, UNF and metric.
Rated pressure: up to 630 bar. zfc 14
Catalogue 3800
Hydraulics
Compact
Connectors
Fluid
47
Quick Couplings
Middle Pressure – TEMA Multi Line™
TEMA MULTI-LINE® coupling systems can be used for a wide
variety of applications and open up huge potential in handling and
efficiency. Developed by our Swedish design engineers, they have
Motors
Hydraulic Equipment
For each application, we have a solution: general purpose 60 series
meeting ISO 7241-1-B standard, screw-to-connect 6100 series to
connect under pressure, FF series with flat-faced poppet to protect
work place and environment.
Accumulators
Material: steel.
Sizes: from 3/8’’ to 1.1/2’’.
Threads: BSPP, NPTF, NPSF, UNF.
Rated pressure: up to 280 bar.
zfc 27
Catalogue 3800
Filtration
Parflange® 1050
The Parflange® 1050 is an orbital 37° flaring and 180° flanging
machine. By using the patented Parflange® process, it achieves an
excellent sealing surface and a high-strength tube connection.
The Parflange® 1050 BASIC is ideal workshop use and project work,
the 1050 PRO is ideal for professional mass production.
48
Motors
6 spiral hose types including 4SP/4SH, SAE 100R12, R13 and R15 SAE.
Unique to Parker however, is that the full range of spiral hoses are
No-Skive, so no removal of the outer cover or inner tube is required
before crimping the fittings on to the hose. This unique functionality is
achieved through specially designed fittings that bite through the outer
cover and guarantee a total grip system between the fitting and the
hose.
As a complimentary product to this MS range Parker also has the No-
Valves
Skive Compact hose types:
371LT - (3 wire braid Low Temperature Compact hose with 4SP working
pressures).
372 and 372TC - (3 wire braid Compact hose with 4SP working
pressures).
372RH - (with fire-retardant cover).
This 3 wire braided hose has a higher specification than the typical 4SP
Actuators
hose, whilst also offering greater flexibility.
All of the MS products in the range are also available upon request with
nitrile inner tubes that offer higher chemical resistance to aggressive
fluids and are ideal for use with bio-oils.
Accumulators
Dimensions: size -6 to -32 . zfc 15
Catalogue 4400-UK
Filtration
of multispiral hose assemblies with external/internal skive type
fittings. With the ParLock hose and fittings range, Parker meets this
demanding market requirement. The ParLock system offers: A full
range of skive/interlock multi spiral hoses ISO 3862-1 (4SP to R15).
Hose and fitting combination giving performance that exceeds ISO/
EN requirements. Approved hose and fitting compatibility ”one
manufacturer, one source”. Field-tested, proven reliability suitable for:
– High flex-impulse applications
– High vibration applications Analysis
Fluid
zfc 18
Catalogue 4480-B28.1-UK
Connectors
Fluid
49
Rubber Hoses
Parkrimp Compact Hoses
The design of compact hoses for the future. The medium pressure
hydraulic hose product range contains:
• Elite Compact hoses exceeding EN specifications
Motors
tubes.
Dimensions: size -4 to -20.
Working pressure: up to 42,5 MPa.
Temperature range: -50 °C to +100 °C.
zfc 16
Catalogue 4400-UK
Accumulators
Catalogue 4400-UK
Fluid
Catalogue 4400-UK
50
Motors
For the following good reasons Parker Hannifin is worldwide market
leader with the Push-Lok System. Push-Lok hose and fittings are
worldwide approved and available with a variety of connections in
DIN, BSP, SAE, JIC and ORFS in brass, steel and stainless steel.
The Push-Lok System includes 9 hose types for a multiplicity of
applications. During many years of system development three
different hose constructions were created:
• 6 rubber hose constructions
Valves
• 2 thermoplastic hose constructions
• 1 hybrid hose construction
The hoses are available with 6 different colours, which could be used
to sign different kind of fluids.
Please find below some basic features about the Push-Lok System:
• Easy assembly - no tools and clamps required
• Low assembly costs
Actuators
• High functional safety with a safety factor of 4
• Hose + fitting = One manufacturer
• High-class hose types
Customer oriented hose developments are the basis for high-class hoses.
Accumulators
zfc 16
Catalogue 4400-UK
Filtration
In applications where even higher abrasion resistance than the Parker
Compact hoses already offer is required, the TC (Tough Cover) and
the ST (Super Tough cover) hoses offer extreme abrasion resistance
for extreme applications. Specifying a Parker hose with ST cover offers
an abrasion resistance level 450 times greater than that of a standard
rubber cover according to ISO 6945 metal to hose abrasion test
results. The same test results prove Parker’s TC cover to be 80 times
Analysis
more abrasion resistant than the standard rubber cover. These Fluid
ultra high abrasion resistant hoses give increased service life, lower
maintenance costs and can eliminate the need for costly hose
protectors such as guards or sleeves. As with all Parker No-Skive
hoses the cover does not need to be removed before assembling the
Parkrimp fittings.
Hydraulics
51
FLUID & GAS HANDLING HYDRAULICS PNEUMATICS PROCESS CONTROL SEALING & SHIELDING
Key Markets Key Markets Key Markets Key Markets Key Markets
U Aerospace U Aerospace U Aerospace U Chemical & refining U Aerospace
U Agriculture U Aerial lift U Conveyor & material handling U Food, beverage & dairy U Chemical processing
U Bulk chemical handling U Agriculture U Factory automation U Medical & dental U Consumer
U Construction machinery U Construction machinery U Food & beverage U Microelectronics U Energy, oil & gas
U Food & beverage U Forestry U Life science & medical U Oil & gas U Fluid power
U Fuel & gas delivery U Industrial machinery U Machine tools U Power generation UÊÊ iiÀ>Ê`ÕÃÌÀ>
U Industrial machinery U Mining U Packaging machinery U Information technology
U Mobile U Oil & gas U Transportation & automotive Key Products U Life sciences
U Oil & gas U Power generation & energy U Analytical sample conditioning U Military
U Transportation U Truck hydraulics Key Products products & systems U Semiconductor
U Welding U Air preparation U Fluoropolymer chemical delivery U Telecommunications
Key Products U Compact cylinders fittings, valves & pumps U Transportation
Key Products U Diagnostic equipment U Field bus valve systems U High purity gas delivery fittings,
U Brass fittings & valves U Hydraulic cylinders UÊÊ À««iÀÃ valves & regulators Key Products
U Diagnostic equipment & accumulators UÊÊ Õ`i`ÊVÞ`iÀÃ U Instrumentation fittings, valves U Dynamic seals
U Fluid conveyance systems U Hydraulic motors & pumps U Manifolds & regulators U Elastomeric o-rings
U Industrial hose U Hydraulic systems U Miniature fluidics U Medium pressure fittings & valves U EMI shielding
U PTFE & PFA hose, tubing & U Hydraulic valves & controls U Pneumatic accessories U Process control manifolds U Extruded & precision-cut,
plastic fittings U Power take-offs U Pneumatic actuators & grippers fabricated elastomeric seals
U Rubber & thermoplastic hose U Rubber & thermoplastic hose U Pneumatic valves and controls U Homogeneous & inserted
& couplings & couplings U Rodless cylinders elastomeric shapes
U Tube fittings & adapters U Tube fittings & adapters U Rotary actuators U High temperature metal seals
U Quick disconnects U Quick disconnects U Tie rod cylinders U Metal & plastic retained
U Vacuum generators, cups & sensors composite seals
U Thermal management
52
53
Contact Us!
Phone:
00800 27 27 5374 (European Product Information Centre)* There is a European Product
+44 1442 358 429 (English speaking service)** Information Centre in the
+44 1442 358 428 (German speaking service)** following Sales Companies, AT,
+44 1442 358 427 (French speaking service)** BE, CH, DE, IE, ES, FR, IT, PT,
SE, UK but the 00800 27 27 5374
* If you are calling from Austria, Belgium, Czech Republic, Eire, number is live in all the following
Finland, France, Germany, Italy, Portugal, Spain, Sweden, countries and will be answered
Switzerland, United Kingdom. by a member of staff with good
** If you are calling from other countries. product knowledge, EPIC agents
Web: www.parker.com will be put in place in those
Email: epic@parker.com countries highlighted in red in
the near future. AT, BE, CH, CZ,
DE, DK, ES, FI, FR, IE, IT, NL, NO,
PL, PT, RU, SE, UK, ZA.
54
Offer of Sale
Please contact your Parker representation for a detailed ‘Offer of Sale’.
55
© 2008
YYYYParker
ParkerHanninfi
Hannifinn Corporation.
Corporation. All
All rights
rights reserved.
reserved. Bulletin
Catalogue HY02-8023/UK.
HY00-0000/UK. XM5M 11/2008 PC
MM/YYYY XX
European Product Information Centre
Free phone: 00 800 27 27 5374
(from AT, BE, CH, CZ, DE, EE, ES, FI, FR, IE,
IT, PT, SE, SK, UK)
Fax: +44 1442 458112
US Product Information Centre
Free phone: 1-800-27 27 537
Cat_Mobile_all_2008_5.indd 56 1
Backcovers_HYGE_081111.indd 08-11-28 12.17.48
08-11-11 10.17.34