Professional Documents
Culture Documents
i01655514
SMCS - 5207-510-OC
NOTICE
Clean the area around the drain plug and clean the area around the check/fill plug before removing the plugs.
Illustration 1 g00854970
1 of 2 18-09-2014 7:51 AM
14H Motor Grader ASE00001-UP (MACHINE) POWERED BY 3176C E... https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnur...
Illustration 2 g00108106
1. Remove drain plug (1). Remove the check/fill plug (2). Allow the oil to drain into a suitable container.
3. Fill the circle drive housing with oil. See Operation and Maintenance Manual, "Refill Capacities".
5. Start the engine. Operate the machine for a few minutes. Check the circle drive housing for leaks.
6. Stop the engine. Remove the check/fill plug and check the oil level. Maintain the oil level to the bottom
of the filler opening. If necessary, add oil.
Copyright 1993 - 2014 Caterpillar Inc. Thu Sep 18 2014 07:49:37 GMT+0300 (Arab Standard Time)
All Rights Reserved.
Private Network For SIS Licensees.
2 of 2 18-09-2014 7:51 AM