Professional Documents
Culture Documents
i01829992
Illustration 1 g00934106
The front wheel bearings are located on the inner side of each front wheel. The check/fill plugs (1) are located
on the housings of each front wheel bearing.
Clean the surface around each check/fill plug before you change the oil.
NOTICE
1 of 2 18-09-2014 7:56 AM
14H Motor Grader ASE00001-UP (MACHINE) POWERED BY 3176C E... https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnur...
2. Use a 1U-7683 Suction Gun in order to remove the oil from the housing for the wheel bearing.
3. Add oil to the housing for the wheel bearing until the oil level is at the bottom of the opening for
check/fill plug (1) .
Copyright 1993 - 2014 Caterpillar Inc. Thu Sep 18 2014 07:56:08 GMT+0300 (Arab Standard Time)
All Rights Reserved.
Private Network For SIS Licensees.
2 of 2 18-09-2014 7:56 AM