Professional Documents
Culture Documents
i01827858
Hot oil and hot components can cause personal injury. Do not allow hot
oil or hot components to contact skin.
NOTICE
Park the machine on a level surface with front wheels straight ahead. Lower all attachments to the ground.
Apply a slight downward pressure to the attachments. Center the articulation of the machine and install the
frame lock pin. The frame lock pin must move freely in the frame. Move the front wheels to vertical and
install the wheel lean bolt. Engage the parking brake. Stop the engine.
Clean the area around the filler cap before you remove the filler cap. Clean the area around the filter cover
before you remove the filter cover.
1 of 2 18-09-2014 7:37 AM
14H Motor Grader ASE00001-UP (MACHINE) POWERED BY 3176C E... https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnur...
1. Slowly remove hydraulic oil filler cap (1) in order to relieve the tank pressure.
2. Remove filter cover (2) from the hydraulic system oil tank.
3. Inspect the seal for the cover. If necessary, replace the seal.
7. Maintain the hydraulic oil level above the "MIN" mark on sight gauge (3) .
8. Inspect the filler cap gasket. If the filler cap gasket is damaged, replace the filler cap gasket. Install the
oil filler cap.
Copyright 1993 - 2014 Caterpillar Inc. Thu Sep 18 2014 07:35:36 GMT+0300 (Arab Standard Time)
All Rights Reserved.
Private Network For SIS Licensees.
2 of 2 18-09-2014 7:37 AM