Professional Documents
Culture Documents
P. Burgos Street,
Tacloban City
adfc.tac.84@gmail.com
Module
in
(ITV 1)
Prepared
by
MR. JUDITO C. ODAL
(Instructor)
1
Descriptive Title: Computer System Servicing
Learning Outcome: At the end of this lesson, you will learn how build, install, and configure
computer systems.
Align the I/O connectors on the back of the motherboard with the openings in the
back of the case.
Align the screw holes of the motherboard with the standoffs or holes stand.
Insert all of the motherboard screws.
Tighten all of the motherboard screws.
Connect the Power Cables
Motherboard Power Connections
Follow these steps for motherboard power cable installation:
Align the 24-pin ATX power connector with the socket on the motherboard.
Gently press down on the connector until the clip clicks into place.
Align the 4-pin AUX power connector with the socket on the motherboard.
Gently press down on the connector until the clip clicks into place.
Power Connectors
Follow these steps for power connector installation:
2
Connect the Data Cables
Follow these steps for data cable installation:
Plug the other end of the SATA cable into the Optical drive.
Plug one end of the SATA cable into the motherboard socket. Outlet
Plug the other end of the SATA cable into the HDD.
Plug one end of the SATA cable into the motherboard socket.
Double check to make sure all cables are securely connected to the devices and to the
motherboard.
Covering Installation
Position the system unit downward, slightly put the cover case until it totally inserted.
Position the system unit upward and secured with the screws.
Connect External Cables to the Computer
Follow these steps for external cable installation: