Professional Documents
Culture Documents
Single RAN, Rel. SRAN 18A, Operating Documentation, Issue 02 (HTML) > Flexi Multiradio 10 BTS > Flexi Multiradio 10
BTS Descriptions > Flexi Multiradio BTS RF Module and Remote Radio Head Description > Descriptions of 3TX RF
Modules
Functional description
Table: FXCB functional specification
Property Value
MIMO No
Interfaces
FXCB interfaces
Place the cursor over the table or module for more information.
localhost:9090/informationbrowser/index.jsp 1/8
31/07/2019 Flexi RF Module 3TX 850 (FXCB)
Remote Electrical RET 1 8-pin circular
Tilt
RET: 24 V
localhost:9090/informationbrowser/index.jsp 2/8
31/07/2019 Flexi RF Module 3TX 850 (FXCB)
Electrical specifications
Table: FXCB electrical specifications
Property Value
-57.0 V DC to -60.0 V DC
Power consumption
Table: FXCB power consumption
Mode Configura Output Estimated power consumption [W] at 48VDC input at 25°C. Non-
tion power committed estimated values depend on the final product HW and SW
per optimization with +/- 10% margin. Average = (6h low hour load, 10h
carrier medium hour load and 8h busy hour load) / 24h
[W]
localhost:9090/informationbrowser/index.jsp 3/8
31/07/2019 Flexi RF Module 3TX 850 (FXCB)
0.8 1.1
localhost:9090/informationbrowser/index.jsp 4/8
31/07/2019 Flexi RF Module 3TX 850 (FXCB)
Property Value
IP rating IP65
Floor/Wall installation
localhost:9090/informationbrowser/index.jsp 5/8
31/07/2019 Flexi RF Module 3TX 850 (FXCB)
Volume 19.3 l
Environmental specifications
Table: FXCB environmental specifications
Property Value
LEDs
Table: FXCB LEDs
localhost:9090/informationbrowser/index.jsp 6/8
31/07/2019 Flexi RF Module 3TX 850 (FXCB)
Stable Red for less than 5 seconds Switched ON, but the next No alarm
and changes to Stable Yellow conditions are not reached yet
Stable Red for less than 5 seconds The module is in the process of No alarm
resetting
Blinking Colors (Red, Yellow, and Module highlighting (Flexi BTS SM No alarm
Green), each color stable for 0.5 functionality that can help identifying
second faulty module)
RF Module fan/TX status LED: Red At least one fan is faulty or degraded -
WARNING!
Note:
localhost:9090/informationbrowser/index.jsp 7/8
31/07/2019 Flexi RF Module 3TX 850 (FXCB)
The minimum startup voltage is 40.5 V DC. If the input voltage is below/beyond extended limits, unit might shut
down.
localhost:9090/informationbrowser/index.jsp 8/8