Professional Documents
Culture Documents
Ficha Tecnica FPPI Val 3 Vias PDF
Ficha Tecnica FPPI Val 3 Vias PDF
Body - Brass
water supply to the sprinkler system. This design also allows
Handwheel - Iron
Authoritys’ Having Jurisdication to test system pressure with an
additional gauge through the second outlet. (The second outlet
Sizes:
is normally plugged during installation with a 1/4" IPS pipe plug.)
1/4” IPS
Working Pressure:
Installation
400 WOG
Installation of the three-way Thread Sealing Tape or a suit-
valve can be accomplished able pipe thread sealant such
with normal field installation as PipeFit® Thread Sealant
tools. Make sure the valve Paste with PTFE when in-
is installed according to the stalling the valve. DO NOT
flow indication arrow that has OVERTIGHTEN THREADS.
been cast into the valve body. OVERTIGHTENING MAY
The most common installation CAUSE VALVE FAILURE.
allows for a 1/4" IPS nipple
*UL/ULC Listed 2R97
between the valve and the
water supply being measured.
This assures there will be ad-
equate spacing for the sprin-
kler system gauge from the
riser. Use either PTFE Pipe
Page Bottom
Rated Pressure
Model Type Size In.
(psig)
© 2013 UL LLC
The appe arance of a com pany's nam e or product in this database doe s not in itse
lf assure that products so ide ntifie d have be e n
m anufacture d unde r UL's Follow-Up Se rvice . O nly those products be aring the
UL Mark should be conside re d to be C e rtifie d and
cove re d unde r UL's Follow-Up Se rvice . Always look for the Mark on the product.