Professional Documents
Culture Documents
YOU HERE: Steel numbers -> Number 1.45XX OR Steel and cast iron standards -> / EN 10088-3
X1CrNiMoCuN20-18-7 ( 1.4547 )
Grade : X1CrNiMoCuN20-18-7
Number: 1.4547
EN 10088 - 3 : 2005 Stainless steels. Technical delivery conditions for semi-finished products, bars,
Standard:
rods, wire, sections and bright products of corrosion resisting steels for general purposes
max 0.02 max 0.7 max 1 17.5 - 18.5 max 0.03 max 0.01 19.5 - 20.5 6-7 0.18 - 0.25 0.5 - 1
M e c ha nic a l pr ope r t ie s
M e c ha nis c he Eige ns c ha f t e n
Ca r a c t e r is t ique s m e c a nique s
R eH Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite d�elasticite minimale
R m Tensile strength / Zugfestigkeit / Resistance a la traction
A Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal
J Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc
http://www.steelnumber.com/en/steel_composition_eu.php?name_id=275 1/2
3/6/2014 X1CrNiMoCuN20-18-7 / 1.4547 - steel equivalent, mechanical properties, chemical composition
He a t t r e a t m e nt c ondit ions
+A Soft annealed
+AC Annealed to achieve spheroidization of the carbides
+AR As rolled
+AT Solution annealed
+C Cold drawn / hard
+CR Cold rolled
+FP Treated to ferrite-pearlite structure and hardness range
+I Isothermal annealing
+LC Cold drawn / soft
+M Thermo mechanical rolling
+N Normalized
+NT Normalized and tempered
+P Precipitation hardened
+PE Peeled
+QA Air quenched and tempered
+QL Liquid quenched and tempered
+QT Quenched and tempered
+S Treated to improve shearability
+SH As rolled and turned
+SR Cold drawn and stress relieved
+T Tempered
+TH Treated to hardness range
+WW Warm worked
+U Untreated
© 2011- 2014 All rights reserved. The contents from this site may not be reproduced.
The entire risk as to use of these content is assumed by you the user
http://www.steelnumber.com/en/steel_composition_eu.php?name_id=275 2/2