Professional Documents
Culture Documents
What It Is
How It Works
• Sealant is applied as a continuous ring around
entire joint.
• The excess sealant is then cut to length to
create a butt joint.
Where To Use • Ends of butt joint are kneaded together.
• Protective release paper is removed from the
• Sanitary Manhole Joints sealant ring.
• Stormwater Manhole Joints
• Irrigation and Drainage Systems
• Box Culverts
Why It’s Better
• Elliptical/Arch Pipe
• Architectural Foundations • A variety of shapes and sizes to fit almost
• Underground Utility Vaults any application.
• Stormwater Treatment & Inlet Structures • Allow for joint movement and differential
• On-Site Treatment Tanks settlement in low temperature in
• Grease Interceptors accordance to ASTM C 765 - Standard
• Wet Wells Test Method for Low-Temperature
Flexibility of Preformed Tape Sealants
• Tested to higher standards than bitumen
(mastic) and blended materials besides
ASTM C990, Section 6.2 Butyl Rubber
Sealants.
• Compression Recovery – ASTM C 972-00
(2011): Butyl sealants provide rebound for
joint settlement and movment.
108
Press-Seal believes all information is accurate as of its publication date. Information, specifications, and prices
are all subject to change without notice. Press-Seal is not responsible for any inadvertent errors. Copyright 2019.
Product Performance
EZ-STIK BUTYL JOINT SEALANT meets or exceeds all requirements of the following Standards,
Specifications and/or Test Methods:
• ASTM C 990 - Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box
Sections Using Preformed Flexible Joint Sealants; Section 6.2 Butyl Rubber Sealants
• AASHTO M 198 - Joints for Circular Concrete Sewer and Culvert Pipe Using Flexible Watertight
Gaskets
• ASTM C 972 - 00(2011) - Standard Test Method for Compression-Recovery of Tape Sealant
• ASTM C 765 - 97(2015) - Standard Test Method for Low-Temperature Flexibility of Preformed
Tape Sealants
Press-Seal believes all information is accurate as of its publication date. Information, specifications, and prices
are all subject to change without notice. Press-Seal is not responsible for any inadvertent errors. Copyright 2019.
109
Phone: 800-348-7325 PRESS-SEAL CORPORATION Email: sales @press-seal.com
Fax: (260) 436-1908 Protecting Our Planet’s Clean Water Supply Web: www.press-seal.com
ISO 9001: Registered • Version 09.09.19.815
EZ-STIK
SELECTION GUIDE
BUTYL SEALANT, LUBRICANTS & WRAP
1/2” 1 1/2”
.45 x .45 1.187 x 1.5
11 x 11 mm
3/8” (9.5 mm) 1 1/4” 30 x 38 mm
Round 1.0 x 1.255
25 x 31 mm
3/4”
.675 x .675
17 x 17 mm
7/8” x 1 3/4”
.88 x 1.75
1/2” x 1” x 5/8” 22 x 44 mm 2”
(13 x 25 x 16 mm) 1.875 x 1.675
1” 48 x 43 mm
.89 x .89
23 x 23 mm
All sizes sold 40 cartons per pallet. All pallets are shrink wrapped for outside storage.
Quantity discounts available - contact our Customer Service Department.
110
Press-Seal believes all information is accurate as of its publication date. Information, specifications, and prices
are all subject to change without notice. Press-Seal is not responsible for any inadvertent errors. Copyright 2019.
Typical Properties
The following values represent typical test results and are
manufacturing specifications
Specific Gravity @ 77ºF (25 C) (AASHTO T229) ASTM D71 1.15 - 1.50 1.25 - 1.35
Meets
Ductility @ 77ºF (25 C), cm (AASHTO T51) ASTM D113 5.0 min.
requirement
Flash Point C.O.C. ASTM D92 350º (177 C) min. 375ºF (191 C)
Fire Point C.O.C. ASTM D92 375º min. (191 C) 385ºF (196 C)
Compression@ 77F 79
Application Properties
Press-Seal believes all information is accurate as of its publication date. Information, specifications, and prices
are all subject to change without notice. Press-Seal is not responsible for any inadvertent errors. Copyright 2019.
111
Phone: 800-348-7325 PRESS-SEAL CORPORATION Email: sales @press-seal.com
Fax: (260) 436-1908 Protecting Our Planet’s Clean Water Supply Web: www.press-seal.com
ISO 9001: Registered • Version 09.09.19.815