Professional Documents
Culture Documents
com
Thermal Resistance coils to mount. sfc. Rth °C/W 0.15 0.12 0.06
Thermal Time Constant* up to 63% max. coiltemp. τ th s 90 90 90
Temperature Cut-off / Sensor PTC 1kΩ / KTY 83-122
Coil Unit Weight ex. cables W kg 4.9 5.9 11.6 Approvals
See page 28 for Analog hall
Coil Unit Length ex. cables L mm 244 290 562
Motor Attraction Force rms @ 0 A Fa N 3400 4150 8300
Mechanical
* These values are only applicable when the mounting surface is at 20°C and the motor is driven at maximum continuous current. If these values differ in your application, please check our simulation tool.
** Actual values depend on bus voltage. Please check the F/v diagram in our simulation tool.
Ver. 1.08
©2016 Tecnotion BV - All rights reserved - The contents of this document are subject to change without prior notice.
TM TL TB TBW 13
65 60.5
Mounting instructions and flatness or parallelism requirements
can be found in the Iron Core installation manual. CAD files, 3D
MAGNET PLATES 41
COIL UNITS
models and the manual can be downloaded from our website.
24
Mounting Height
16.8
45 ±0.1
O 11.9 Power cable
6.5
O 4.3 Thermal sensor cable Optional: Digital Hall Module
M 3 (2x, 3 deep)
130 O2
+0.05
0 (2x, 2.5 deep)
+
-2
+1
14
Coil unit
30
Cable lenght 1.2 m
12.2
8
13
5.1
Slotted Hole O5x0.5 (6 deep)
Magnet plate For Dowelpin DIN7 O5h8
Slotted Hole O5x0.5 (3 deep) 168 14.2 Hole O5 (3 deep) 54 160
For Dowelpin DIN7 O5h8 For Dowelpin DIN7 O5h8 64 64 64
(Optional use) 12 (Optional use) Hole O5 (6 deep) 16
For Dowelpin DIN7 O5h8
TB 192mm
TB12
38
120
130
R4
.6
38
60.5
88
° 244
912 3x48 (=144) 22 eep)
5 DIN 6.5 d
for M 192 M5 (
O6
51 208
264 14.2 80 80 80
12 16
TB 288mm
TB15
290
5x48 (=240) 22
288
192
168 168 14.2 51 480
12 80 80 80 32 80 80 80
16
2x TB 192 mm
TB30
384
Ver. 1.08
©2016 Tecnotion BV - All rights reserved - The contents of this document are subject to change without prior notice.
TM TL TB TBW