Professional Documents
Culture Documents
Essential tools:
Tuner
Electric guitar lead
Metal engineering ruler
0.4mm / 0.5mm Allen key
Flat / cross screwdrivers (a range of different sizes)
Non-essential tools:
Capo
String winder
Steps:
Check height at fret 12 – generally 0.5mm from bottom of string to top of fret.
NB: Light pickers and jazz musicians can play a very straight neck. When the
instrument allows for it, set to 0.4mm.
Hard strummers, extra light gauge strings and fingerboards with a smaller radius, set
to 0.8mm to 1.2mm.
Remember starting point – loosen a bit first. Single rod - righty tighty to reduce
gap – check tuning – if not changed, then not turning yet.
NB: If tightened too much, the string will buzz when playing in middle of neck.
1