SAFT
COMPONENT MAINTENANCE MANUAL,
2520
2. Storage
A, Preparation of the battery before storage
~ Adjust the electrolyte levels (Refer to "CHECK". paragraph 2.4 (1).
Then discharge et a constant current of 25 amps down to a terminal
voltage of 20 vaits.
+ Lightly lubricate these components with neutral petrolatum or Tight.
oil; the nuts, the links. the connector contacts and all the
companents that can be damaged by atmospheric corrosion
+ Put the battery in its usual vertical position.
B. Storage room:
Keep the SAFT 2520 natteries in a dry and clean room.
C. Temperature conditions:
Keep the batteries at a temperature of -60°C to +60°C (-76°F to
+140°F). But the best temperature range is between 0 and +30°C (+32°F
and +86°F).
D. Packing
The SAFT 2520 batteries are usually put in cardboard boxes. For long
storage or sea transportation, we recommend that you put the
batteries in a welded plastic container. In this type of container.
‘the batteries can be kept for 10 years in the best storage
conditions.
E. Transportation
It is important that you move the nickel-cadmium SAFT 2520 batteries
in the verticat position. Thus. the containers must be identified
with "TOP" and "BOTTOM" marks that can be read easily.
F. Servicing after storage
Storage
time Servicing procedure
Less then 3 Charge the battery (Do one of
months ‘the procedures given in
“DESCRIPTION AND OPERATION",
Paragraph 2. (2)) for a
fully discharged battery)
3 montis to Do the Periodical check
1 year (Refer to "CHECK" 2.4).
Nore than Do the Regular check
1 year (Refer to "CHECK" 2.B).
24-31-11 aetiae