Professional Documents
Culture Documents
TC7S08F, TC7S08FU
Features
• High Speed : tpd = 7ns (typ.) at VCC = 5 V
• Low power dissipation : ICC = 1 μA (max) at Ta = 25°C
• High noise immunity : VNIH = VNIL = 28% VCC (min)
• Output drive capability : 5 LSTTL Loads
• Symmetrical Output Impedance |IOH| = IOL= 2mA (min)
• Balanced propagation delays : tpLH ≒ tpHL (SMV)
TC7S08FU
• Wide operating voltage range : VCC = 2 to 6 V
Marking
Product name
E 2
(USV)
Weight
SSOP5-P-0.95 : 0.016 g (Typ.)
SSOP5-P-0.65A : 0.006 g (Typ.)
Absolute Maximum Ratings (Ta = 25°C)
Characteristics Symbol Rating Unit
Pin Assignment (top view)
Supply voltage VCC −0.5 to 7.0 V
DC input voltage VIN −0.5 to VCC + 0.5 V
DC output voltage VOUT −0.5 to VCC + 0.5 V IN B 1 5 VCC
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if
the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).
1 2009-08-05
TC7S08F/FU
IEC Logic Symbol Truth Table
A B Y
IN A
OUT Y L L L
&
IN B L H L
H L L
H H H
Operating Ranges
2 2009-08-05
TC7S08F/FU
Electrical Characteristics
DC Characteristics
Ta = 25°C Ta = −40 to 85°C
Characteristics Symbol Test Condition Unit
VCC (V) Min Typ. Max Min. Max.
2.0 1.5 ⎯ ⎯ 1.5 ⎯
High-level
VIH ⎯ 4.5 3.15 ⎯ ⎯ 3.15 ⎯
input voltage
6.0 4.2 ⎯ ⎯ 4.2 ⎯
V
2.0 ⎯ ⎯ 0.5 ⎯ 0.5
Low-level
VIL ⎯ 4.5 ⎯ ⎯ 1.35 ⎯ 1.35
input voltage
6.0 ⎯ ⎯ 1.8 ⎯ 1.8
3 2009-08-05
TC7S08F/FU
AC Characteristics (CL= 15pF, VCC = 5V, Input: tr = tf = 6 ns)
Ta = 25°C
Characteristics Symbol Test Condition Unit
Min. Typ. Max.
tTLH
Output Transition Time ⎯ ⎯ 5 10 ns
tTHL
tpLH
Propagation Delay Time ⎯ ⎯ 7 15 ns
tpLH
Note 1: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating
current consumption without load.
Average operating current can be obtained by the equation:
ICC (opr.) = CPD・VCC・fIN + ICC
4 2009-08-05
TC7S08F/FU
Package Dimensions
5 2009-08-05
TC7S08F/FU
Package Dimensions
6 2009-08-05
TC7S08F/FU
7 2009-08-05