LUMA Series Cobra-head Style LED Streetlight Maintenance Manual
LED light module replacement
Step 1: Remove 6pcs screws which fix the led light module to the light body; Step 2: Release using fingers the WAGO branded quick connectors out of the wire leads, then replace the LED light module with a new one.
LED driver replacement
Step 1: Press the terminal block using a screw driver at the same time remove the wires at the input side of the LED driver out of the terminal block. Step 2: Release using fingers the WAGO branded quick connectors at the output side of the LED driver so as to disconnect the LED light module with the LED driver. Step 3: Unscrew the LED driver off the LED driver compartment bottom, remove the driver out of the compartment, finally replace it with a new LED driver.