Professional Documents
Culture Documents
com
In any worst case scenario, the wood can be salvaged again by sanding the dried wood staining dye o with a
heavy grit sandpaper so bare wood is exposed again. Follow up by sanding the wood with 150-180 grit
sandpaper until smooth, and start the wood staining process again.
SEALING INFORMATION
We recommend using a UV protecting wood sealer over the dried stain of Keda wood dye products in order to
o er the best stain color protection. However, when Keda Dye is used as an interior stain, or items that will not
be in direct outdoor sunlight for extended periods of time, a simple lacquer, or other indoor wood sealer will
su ce to assist in protecting the wood coloring. If you choose not to use a UV sealer, the color can still last for
quite a long time, provided you keep the wood nishes out of direct sunlight for repeated daily exposure. When
applying the rst seal coat, we recommend applying a very light, thin coat with minimal rubbing and then let it
dry. A light dusting from a spray version of the wood sealer will lock the dyes into the wood the best without
disturbing the dried wood staining. This will seal the wood dyes and help prevent any possible reactions, which
is somewhat rare if light and gentle on the rst coat.
Apply subsequent coats of wood sealer according to the manufacturer's recommendations. After the sealer
cures, follow up with wet sanding and polishing for mirror like nish if desired.
Contact our company with any questions about these instructions. We’re always happy to help our valued
customers.
FOLLOW US
HOURS
8:00AM – 6:00PM CST M – F
9:00AM – 2:00PM CST Sat
CONTACT US
Phone: 920-717-1954
PO Box 1776
Manitowoc, WI 54221
info@kedadyeinc.com