Professional Documents
Culture Documents
Materials:
Worsted weight yarn: White, off-white, light brown, dark brown, black, gold, red,
pink, green (I used Caron Simply soft for the white and light brown, and TLC Essentials for the
rest)
Size G/6/4mm crochet hook
Size H/8/5mm crochet hook FOR THE RUG ONLY!
Polyfill stuffing
Tapestry needle
6 mm doll eyes (for Santa, penguin, and snowman)
Small black beads (for bear and mouse eyes)
Embroidery thread
Felt- white, brown, gold/yellow, pink, red, green, orange
Medium sized bells
Small buttons for snowman
Abbreviations:
ch = Chain
sc = Single Crochet
2sctog = single crochet 2 stitches together (decrease)
2scinc = single crochet twice in the same single crochet stitch (increase)
hdc= half double crochet
dc= double crochet
About this pattern: This pattern is worked in a spiral, so please mark the last stitch of each round to keep
place, with a stitch marker or safety pin. When starting a piece, the pattern calls for a “ring” use what ever
ring you would like: a slip knot, double ring, an adjustable loop, etc… The tail from the ring should be
tightened, sewn into the piece, and cut.
©Copyright 2006: text and design Amy Gaines
1
Amigurumi Christmas Table
Decoration
Santa:
2
Rnd 4: *2scinc, 2 sc * repeat around (16)
Rnd 5: *2scinc, 3 sc * repeat around (20)
Rnd 6: *2scinc, 4 sc * repeat around (24)
Rnd 7: sc around (24)
Rnd 8: sc around (24)
Rnd 9: sc around (24) Change to white yarn
Rnd10: sc around (24)
Rnd11: sc around (24) End- slip stitch to next stitch and cut yarn. With white yarn, make a loop
on the top of the hat, stuff hat lightly, and place hat onto head above beard, sew brim onto head,
weave in all tails.
Little Bear:
3
Little Box:
4
Tree: with green yarn
Rnd 1: make a ring, sc 6 times in ring (6)
(remember to mark the last stitch at
the end of each round.)
Rnd 2: (in 1st sc on the ring) *2scinc, 1 sc*
repeat around (9)
Rnd 3: sc around (9)
Rnd 4: *2scinc, 2 sc* repeat around (12)
Rnd 5: sc around (12)
Rnd 6: *2scinc, 3 sc* repeat around (15)
Rnd 7: sc around (15) Rnd22: *2scinc, 11 sc* repeat around (39)
Rnd 8: *2scinc, 4 sc* repeat around (18) Rnd23: sc around (39)
Rnd 9: sc around (18) Rnd24: *2scinc, 12 sc* repeat around (42)
Rnd10: *2scinc, 5 sc* repeat around (21) Rnd25: sc around (42)
Rnd11: sc around (21) Rnd26: *2scinc, 13 sc* repeat around (45)
Rnd12: *2scinc, 6 sc* repeat around (24) Rnd27: sc around (45)
Rnd13: sc around (24) Rnd28: *2scinc, 14 sc* repeat around (48)
Rnd14: *2scinc, 7 sc* repeat around (27) Rnd29: sc around (48)
Rnd15: sc around (27) Rnd30: *2scinc, 15 sc* repeat around (51)
Rnd16: *2scinc, 8 sc* repeat around (30) Rnd31: sc around (51)
Rnd17: sc around (30) Rnd32: *2scinc, 16 sc* repeat around (54)
Rnd18: *2scinc, 9 sc* repeat around (33) Rnd33: sc around (54) End- slip stitch to
Rnd19: sc around (33) next stitch and cut yarn, leaving a 12 inch
Rnd20: *2scinc, 10 sc* repeat around (36) tail.
Rnd21: sc around (36)
Stuff the tree very firmly. Cut out 16 felt circles of pink and red felt. Sew them on to the tree
randomly. Set tree aside.
5
Arrangement:
Amigurumi Penguin
Ornament
6
Rnds 4 thru Rnd 9: sc around (8) End- slip stitch to next stitch and cut yarn. Do not stuff, sew
each wing onto penguin and head/body seam, weave in all tails.
7
Cup: With off-white yarn
Rnd 1: make a ring, sc 6 times in ring (6) (remember to mark
the last stitch at the end of each round.)
Rnd 2: (in 1st sc on the ring) *2scinc* repeat around (12)
Rnd 3: *2scinc, 1 sc * repeat around (18)
Rnd 4: *2scinc, 2 sc * repeat around (24)
Rnd 5: sc around Thru the back Loop (24)
Rnd 6: Sc around (24)
Rnds 7 thru Rnd 11: Sc around (24) Do not cut yarn, stuff the
cup firmly and place brown hot chocolate circle inside of the
cup and sc around thru both the brown circle and the cup (see
photo).
8
stuffing as you go. End- fasten off, weave in all tails. Cut out brown felt chocolate chips and sew
them on to the cookie.
Oreo: Make 2 with dark brown yarn, and one of white yarn
Rnd 1: make a ring, sc 6 times in ring (6) (remember to mark the last stitch at the end of each
round ).
Rnd 2: (in 1st sc on the ring) *2scinc* in each sc (12) End- slip stitch to next stitch, cut yarn, and
fasten off.
When you have made all three circles, arrange them so that you have the white circle in the
middle and the wrong sides of the brown circles are on the inside against the white circle.
Sew the three together with a couple of stitches in the center only.
Arrange as in photo: and with the sides on the top of the photo, roll up both
layers. Using the tail from the chocolate layer, sew the roll closed, as in second
photo.
9
Whipped Cream: Same as for hot chocolate. Let the piece roll-up and arrange it onto the top of
the Swiss roll and secure on, weave in all tails.
10
Rnd 6: sc around (18)
Rnd 7: 2scinc, 16 sc, 2scinc (20)
Rnd 8: 2scinc, 18 sc, 2scinc (22)
Rnd 9: 2sctog, 18 sc, 2sctog (20)
Rnd10: 2sctog, 16 sc, 2sctog (18)
Rnd11: 2sctog, 14 sc, 2sctog (16)
Rnd12: 7 sc, 2scinc, 2scinc, 7 sc (18)
Rnd13: sc around (18)
Rnd14: sc around (18)
Rnd15: sc around (18) Change to green yarn
Rnd16: sc around (18)
Rnd17: sc around (18) End- slip stitch to next stitch and cut yarn, weave in tail. Stuff the bottom
of the stocking lightly, and fit mouse inside the stocking, just enough to “peak out”- it should be a
tight fit. Sew a red loop on the right side of the stocking- the opposite side of the toe.
Amigurumi Snowman
Ornament
Head: with white yarn
Rnd 1: make a ring, sc 6 times in ring (6)
(remember to mark the last stitch at the end of each
round.)
Rnd 2: (in 1st sc on the ring) 2scinc in each sc (12)
Rnd 3: *2scinc, 1 sc* repeat around (18)
Rnd 4: *2scinc, 2 sc* repeat around (24)
Rnd 5: sc around (24)
Rnds 6 thru Rnd 10: sc around (24)
Rnd11: *2sctog, 2 sc* repeat around (18)
Rnd12: *2sctog, 1 sc* repeat around (12) End- slip stitch to next stitch and cut yarn. Put on 4.00
mm doll eyes onto the face as in photo and stuff. Cut out orange triangle of felt for
snowman’s nose, and glue or sew onto face. Set head aside.
11
Rnd16: *2sctog, 2sc* repeat around (18)
Rnd17: *2sctog, 1sc* repeat around (12) End- slip stitch to next stitch, cut yarn and pull thru.
Sew on 2 buttons onto body first, and then stuff the body very firmly. Attach head to
body and weave in all tails.
Christmas Lights
With Black Yarn
Rnd 1: make a ring, sc 5 times in ring (5)
(remember to mark the last stitch at the end of
each round.)
Rnd 2: (in 1st sc on the ring) *2scinc* repeat
around (10)
Rnd 3: Sc around Thru the BACK Loop (10)
Change to desired color
Rnd 4: *2scinc, 1 sc * repeat around Thru the Back Loop (15)
Rnd 5: *2scinc, 2 sc * repeat around (20)
Rnd 6: sc around (20)
Rnds 7 thru Rnd 11: sc around (20)
Rnd12: *2sctog, 3sc* repeat around (16)
Rnd13: *2sctog, 2sc* repeat around (12)
Rnd14: *2sctog, 1sc* repeat around (8) Start stuffing very firmly.
Rnd15: *2sctog* repeat around (4)End- Before closing up the hole, make sure the light is stuffed
enough, then close hole and weave in tail. With black yarn, make a loop on the black
base of the light.
12
13