Professional Documents
Culture Documents
HEAD
A pig
Row 1.-Slip ring (6mp)
Row 2.-6 increases (12mp)
Row 3 .- * 1mp, 1aum * repeat (18mp)
Row 4 .- * 2mp, 1aum * repeat (24mp)
Row 5 .- * 3mp, 1aum * repeat (30mp)
Row 6 .- * 4mp, 1aum * repeat (36mp)
Row 7 to 12.-The (36mp) are woven
Row 13.-17mp, 2aum, 17mp (38mp)
Row 14.-The (38mp) are woven
Row 15.-18mp, 2aum, 18mp (40mp)
Row 16.-19mp, 2aum, 19mp (42mp)
Row 17 to 24.-The (42mp) are knitted Row 25 .- * 5mp, 1dism * repeat (36mp)
Row 26 .- * 4mp, 1dism * repeat (30mp)
Row 27 .- * 3mp, 1dism * repeat (24mp)
Row 28 .- * 2mp, 1dism * repeat (18mp)
Row 29 .- * 1mp, 1dism * repeat (12mp)
Row 30.-6 decreases
Ears (x2)
A pig
Row 1.-Slip ring (6mp)
Row 2 and 3.-The (6mp) are woven
Row 4 .- * 1mp, 1aum * repeat (9)
Row 5 .- * 2mp, 1 inc * repeat (12)
Row 6.-The (12) are woven
Row 7 .- * 3mp, 1aum * repeat (15)
Row 8 .- * 4mp, 1 inc * repeat (18)
Row 9 to 13.-The (18) are knitted Row 14 .- * 4mp, 1dism * repeat (15)
Row15 .- ** 7mp, 1dism * repeat (12)
Fleco
In black
Row 1.-6mp slip ring
Row 2.-6 increases in loop stitch (12mp).
Row3 .- * 3mp, 1 inc * in roll stitch
(15mp).
In black
Make a chain of 50 and make the first row of loop stitch to be the hair.
Cut several strands of black for the tail.
BODY
A pig
Row 1.-Slip ring (6mp)
Row 2.-6 increases (12mp)
Row 3 .- * 1mp, 1aum * repeat (18mp)
Row 4 .- * 2mp, 1aum * repeat (24mp)
Row 5 .- * 3mp, 1aum * repeat (30mp)
Row 6 .- * 4mp, 1aum * repeat (36mp)
Row 7 .- * 5mp, 1aum * repeat (42mp)
Row 8 .- * 6mp, 1aum * repeat (48mp)
Row 9 to 30.-The (48mp) are woven
Row 31 .- * 6mp, 1dism * repeat (42mp)
Row 32 .- * 5mp, 1dism * repeat (36mp)
Row 33 .- * 4mp, 1dism * repeat (30mp)
Row 34 .- * 3mp, 1dism * repeat (24mp)
Row 35 .- * 2mp, 1dism * repeat (18mp)
Row 36 .- * 1mp, 1dism * repeat (12mp)
Row 37.- 6 decreases
LEGS (X4)
In black
Row 1.-Slip ring (6mp)
Row 2.-6 increases (12mp)
Row 3 .- * 1mp, 1aum * repeat (18mp)
Row 4 to 5.-They are woven (18mp)
A pig
Row 6 to 15.-The (18mp) are woven
Row 16 .- * 2mp, 1aum * repeat (24mp)
Row 17 .- * 3mp, 1aum * repeat (30mp)
Row 18 and 20.-The (30mp) are woven
Row 21 .- * 3mp, 1dism * repeat (24mp)
Row 22.-The (24mp) are woven
Row 23 .- * 2mp, 1dism * repeat (18mp)
Row 24.-The (18mp) are woven
Row 25 .- * 1mp, 1dism * repeat (12mp)
Row 26.- 6 decreases.
Neck
A pig
Make 32 chains and close in a circle
Row 1 to 5.-The (32mp) are woven
Details
Make 41 chains to wrap around the muzzle
Make 51 chains for the one that goes around the head.
1 6SC into magic ring 6
2 İNC * 6 12
3 (İNC, 1SC) * 6 18
4 (İNC, 2SC) * 6 24
5 (İNC, 3SC) * 6 30
7 (İNC, 5SC) * 6 42
9 (İNC, 7SC) * 6 54
11-20 60SC 60
22 (DEC, 7SC) * 6 48
24 (DEC, 5SC) * 6 36
26 (DEC, 3SC) * 6 24
27 (DEC, 2SC) * 6 18
28 18SC 18
We insert safe eyes between rows 16 and 17 at a distance of 7 columns from each other.
11 (8SC, DEC) * 6 54
12-16 54SC 54
17 (7SC, DEC) * 6 48
18-22 48SC 48
23 (6SC, DEC) * 6 42
24-26 42SC 42
27 (5SC, DEC) * 6 36
28-30 36SC 36
31 (4SC, DEC) * 6 30
32-34 30SC 30
35 (3SC, DEC) * 6 24
36-38 24SC 24
39 (2SC, DEC) * 6 18
40-42 18SC 18
43 (1SC, DEC) * 6 12
44-46 12SC 12
47 DEC * 6 6
2 İNC * 6 12
3 (1SC, İNC) * 6 18
4-5 18SC 18
6 (1SC, DEC) * 6 12
7 DEC * 6 6
Tighten the hole, insert to the chain. Fold in half a lapel of a hat and inc
2pcs legs
We start knitting with boots (cherry color), we fill the boots tightly, legs more
free. We collect a chain of 10CH, start knitting with 2 loops from the hook:
6 Change the color to brown and knit the rear loops 44SC 44
7-9 44SC 44
17 21SC 21
18 (5SC, DEC) * 3 18
27-29 Knit in cherry color for the front wall 18SC (close) 18
28-29 18SC 18
31-44 16 SC 16
This is if you knit a boy. If you knit a girl, then do not change the color, but inc
knit on 18 SC, changing through 2 rows white and cherry color. Do not cut the thread at the second leg,
and inc continue by typing 4CH – inc connect 2 legs. Knit in the main color.
4SC (chain)
40
2 (5SC, İNC) * 6 46
3-5 46SC 46
16 (5SC, DEC) * 6 42
17-21 42SC 42
22 (4SC, DEC) * 6 36
23-25 36SC 36
26 (3SC, DEC) * 6 30
27-29 30SC 30
30 (2SC, DEC) * 6 24
31-33 24SC 24
34 (1SC, DEC) * 6 18
2 İNC * 6 12
3 (1SC, İNC) * 6 18
4-6 18SC 18
7 16SC, DEC 17
9 14SC, DEC 15
10 DEC, 13SC 14
12 11SC, DEC 12
13 12SC 12
16-28 16SC 16
29 (6SC, DEC) * 2 14
30 (5SC, DEC) * 2 12
31 (4SC, DEC) * 2 10
32 DEC * 5, close
1 (2SC, İNC) * 5 20
İncish to the body and fix the head. So that she does not swing, we knit a scarf of 2 neck sizes
10-15 50SC 50
17-19 48SC 48
20 (6SC, DEC) * 6 42
21-22 42SC 42
23 42SC, close. 42
Stitch – incam on the doll, the seam should be on the back in the center.
We knit 2 straps: 31CH, from the second loop from the hook 30SC. İncish to the belt.
If you have a girl, you can fix her hair from inc.
The hat is inscribed to the head. We embroider cilia. We draw powder cheeks.
Friendly reminder: Hatsune uses more blue lines. This
doll
The lace outside the child is a kind of blue and the material is Xiaomi
sugar
Look carefully
Hatsune
Crochet symbols:
SC-single crochet,
İNC-increase,
dc-double crochet,
CH-braid needle,
S-lead,
K-empty needle,
note.
* The illustration is for personal use only, please do not make it public or private
Thank you*
Hand Stitch Method, Spiral Hook, (Thread: Moe Doll) Number of Needles Color
note! !! !! You do n’t need to change the color of your hands. Just hook it like this
R3 6SC 6
Left hand
R4 Skin color ( SC, İNC, SC) for blue ( SC, İNC, SC) 8
note
Color change
R5 Change skin color (4 pin double crochet date pin) change blue 7 SC 8
R6 blue 8 SC 8
Right hand
R4 Skin color ( SC, İNC, SC) for blue ( SC, İNC, SC) 8
note
Color change
R5 Blue 3 SC Change skin color (4-pin double crochet date pin) Change blue 4 SC 8
R6 blue 8 SC 8
R8 4 SC 4
color
R9 SC, İNC, 2 SC 5
R10-16 5 SC 5
R17 dec, 3 SC 4
R18 4 SC 4
R20-23 5 SC 5
Leg + Body Needle Method (Thread: Moe Doll) Number of Needles Color
note! !! !! Spiral hooks on both legs, the body should be shaped, and the heel and knees should
be properly stuffed to support the shape
color
R3-5 8 SC 8
R6 5 SC ,, İNC, 2 SC 9
Needle), SC (pick a needle in the heel and instep), SC (upper heel), hdc dec (2hdc
Merge), SC (on the heel), if you don’t understand, please see the group file picture
10
color
R13-17 6 SC 6
R18 SC, İNC, 4 SC 7
R21 9 SC 9
R23-25 10 SC 10
R35 11 SC 11
R37 12 SC 12
R39 13 SC 13
R42 14 SC 14
R44 15 SC 15
R45 15 SC 15
R1—45 are legs, two hooks, the first one is broken, the second one is continuous and then
hooked
color
R48 36 SC 36
R49 16 SC, dec, SC, dec, 15 SC Note that these two pins are reduced between the legs 34
R56 20 SC 20
R57 20 SC 20
color
R59 18 SC 18
R63 16 SC 16
R65 18 SC 18
R67 20 SC 20
Let ’s start hooking the chest, because everyone ’s hands may be a little different.
Then you can use the two additional needles on the waist side of R68 as fixed points to adjust
and use flexibly ~ R68 7 SC, İNC (waist side), 2 SC, 2 İNC, 2 SC, 2 İNC, 2 SC, İNC (waist
side), SC 26
color
R72 36 SC 36
R73 36 SC 36
R74
Leave 12 SC on each of the shoulders without hook, only hook the middle part, hook R74 well
After the line is broken, leave a long line to sew both shoulders, please see the group file
Video “Hatsune Elemental Shoulder Suture Thread” and picture explanation 12 SC
12
R76 6 SC 6
R77 6 SC 6
R78 6 İNC 12
R85-95 48 SC 48
R102 6 dec 6
white
R1—R2 Hook two, the first one is broken, the second one is continuously hooked, and then
the two legs are connected.
R3 28 SC + 28 SC 56
R4-5 56 SC 56
R7 42 SC 42
R8 6 * (5 SC, dec) 36
Next hook the safety pants lace, the same thread hook the two pants legs, 3CH, the next stitch
pull, the cycle ends
Underwear skirt stitching, pull hook, (thread: cute doll) stitch number
color
Pay attention to the clothes we are going to hook on the doll body! Otherwise, you can’t wear
it after hooking!
blue
R13 36 SC 36
R14 36 SC 36
R17-22 48 SC 48
R24-27 54 SC 54
R30 inner half needle (thread: small honey) 57dc İNC, disconnected 114 freshwater blue
Let ’s start hooking up the lingerie skirt ①. For more details, please see the group video
“Explanation of Hatsune Lingerie Skirt ①”
R3 4CH, the next stitch is pulled out, the cycle is over, the thread break ends … Now start to
hook the underwear skirt lace ②.
R1 (with thread: small honey) hook 3dc inside one stitch, loop, end of disconnection … pink
Chest decoration Needle method (thread: small honey) Number of stitches Color
The chest is decorated with a piece hook! Remember to stand up after each flip
R6 SC, İNC, SC 4
R7 4 SC 4
Turkish blue
R8 4 SC 4
R10-13 6 SC 6
R15 2 SC, S, 2 SC 5
The tail decorated with yellow honey on the chest is hooked with a short W-shape at the
edges
Turkish blue
R2 26dc 26
R6 37dc 37
Start to divide into two sides, each with 18 stitches, hook two pieces
Turkish blue
R4 3 * (dc, dc dec) 6
R5 2 * (dc, dc dec) 4
R6 2dc dec 2
R7 dc dec, disconnection 1
Next, start the upper part of the hook coat skirt. For details, please see the group file video:
R3 3dc, 2hdc, 4 SC, 2hdc, 3dc, continuous line and hook shoulder strap 14
Next hook the shoulder strap, the piece hook! Remember to have 1 standing pin in each row,
with two shoulder straps on each side of the top half of the outer skirt
R1-7 SC 1
R9 2 İNC 4
The second shoulder strap needs to be lifted again, and the outer skirt is complete after
hooking! See the group file video for stitching:
Sleeve * 2 stitching, pull hook, (thread: cute doll) stitch number color
The sleeves can be worn after being hooked alone, which is more laborious. If you are
worried that you cannot wear them, you can hook them on your hands.
blue
R2 10 SC 10
R4 12 SC 12
R5 12 SC 12
R6 3 * (3 SC, İNC) 15
R7 15 SC 15
R9 18 SC 18
R11 21 SC 21
R13 24 SC 24
R15 27 SC 27
R16 27 SC 27
R20 33 SC 33
Next start hooking the lace on the side of the sleeve, hook two
R1 (Line: Xiaomi) 10CH, hook 10E at end and end, 10 Turkish blue
Fold the sleeves over the sleeves, and align the short pins with pink honey on top
Hair cover Needle method, pull hook, (thread: cute doll) Number of stitches Color
blue
Like a dress
(Blue)
R2 6 İNC 12
R3 6 * ( SC, İNC) 18
R5 6 * (3 SC, İNC) 30
blue
R7 6 * (5 SC, İNC) 42
R9 6 * (7 SC, İNC) 54
R10-17 54 SC 54
R18 16 SC, 2S, (inner half needle 20 SC), 2S, 14 SC, disconnected 54
Next hook the bangs, and start the hook on the 20 SC of the inner half stitch of the R18 row
hook, there are two layers! The order is first out
Row 20 short stitches are hooked, and then the remaining half stitches are hooked
blue
R3 13CH, inverted 2,2S, 6 SC, 4hdc, pull out every other needle 12
R4 9CH, inverted 2, 2S, 3 SC, 3hdc, pull out every other needle 8
R5 9CH, inverted 2, 2S, 3 SC, 3hdc, pull out every other needle 8
R6 10CH, inverted 2,2S, 2 SC, 3hdc, 2dc, pull out every other needle (the middle hair) 9
R7 9CH, inverted 2,2S, 3 SC, 3hdc, pull out every other needle 8
R8 8CH, inverted 2, 2S, 4 SC, 1hdc, pull out every other needle 7
R9 13CH, inverted 2, 2S, 6 SC, 4hdc, pull out with two needles 12
R11 9CH, inverted 2, 3S, 5 SC, next pin pull out, disconnected 8
blue
R2 14CH, inverted 2,5S, 4 SC, 2hdc, 2dc, pull out with two needles 13
R6 12CH, inverted 2, 3S, 5 SC, 1hdc, 2dc, pull out with two needles 11
R7 15CH, inverted 2,2S, 12 SC, next pin pull 14
R8 14CH, inverted 2, 2S, 11 SC, the next stitch is pulled out, the thread is broken, the
remaining empty stitches are not hooked 13
There are many mainsprings. Everyone pays attention to the position of the mainspring.
For location reference, please see the group file video: “Interpretation of Hatsune bangs”
blue
color)
R2 15 SC, disconnected 15
Then change the little honey hook lace of fresh water blue, and make a circle of lace on the
upper and lower feet.
Wrap the thread a few times in the middle to make a bow shape and stick it to the head of the
braid
Shoes * 2 stitch method, pull hook, (thread: small honey) Number of stitches Color
R2 hdc, hdc İNC, 11hdc, 2 * (hdc, hdc İNC), 11hdc, hdc, hdc İNC 34 yellow
R4 10 SC, hdc, 2dc, dc dec, (4dc combined one stitch), dc dec, 2dc, hdc, 10 SC 29 Turkish blue
In the end, a section of wire is left around the ankle, depending on the group file picture
explanation
Chest pendant
①Look at the group document picture “Hatsune Anime Model” and draw a shape similar to
the body on the paper according to the decoration on the chest, and the body
② Get a piece of aluminum (I use a can bottle) and cut it out according to the shape of the
paper.
③ If you have clay, you can wrap it with a layer of yellow clay. If you do n’t have it, it ’s mainly
sharp.
The soil will have a layer of protection, and then the clay dries and is coated with a layer of
golden acrylic. You can stick to Hatsune ’s chest when it ’s dry ~ Friendly tip: Decoration is
not the only way, there are other ready-made accessories can also be combined ~ flexible use
~ the above
If you don’t understand the method, you can understand it with the video of the group file
“Explaining the practice of chest pendants”
Stage 1 – Engine
Foundation: (make 2)
11. 1ch and crochet sc only on 3 sides, and on the corners make (1sc,1ch,1sc).
Join the two details with the cardboard between them and with a different color yarn (blue in
the example) make a slst all around.
Count 11 points and work slip stitches transversely to form a square (see photo).
Driver’s cab:
While crocheting, straighten the walls of the cabin, giving it the shape of a square.
1: Attach the thread where you worked slip stitches and crochet 11sc for each side of the
square = 44sc, 1slst
Between the 8th and 9th row, crochet 1 row with slst in the desired color (pink in the
example).
18: On the front and rear walls of the cabin make: 1sc, 2hdc, 2dc, 2tr in the same stitch, 2dc,
2hdc, 1sc, then along the other two side walls make: 11 sc each , 1slst = 46.
Between the 17th and 18th row, crochet 1 row with slst in the desired color (pink in the
example).
Cut four rectangles from thick cardboard to the dimensions of the walls of the cabin, insert
the cardboard inside, stuff the cabin!
1: 6sc in MR
2: 6inc=12
3: (1sc, inc)*6=18
4: (2sc, inc)*6=24
5: (Зsc, inc)*6=30
According to the size of the resulting part, cut a circle out of thick cardboard.
7: 3ch, 36 BPDC, 1slst
8: 36sc
9-10: 36sc
Between the 8th and 9th row, crochet 1 row with slst in the desired color (pink in the
example).
Start to stuff!
Roof:
Cut the thread, leaving a tail for sewing. Sew the roof on three sides of the cab by grabbing
only the back loops of the last row. Stuff! The roof should be semi-circular.
Roof decoration:
With white yarn, start in the left corner of the back side:
1: In the remaining loops, in FLO: sc around (all 4 sides), but in each corner make 2sc =50
2: 1ch, 2sc in the corner,(1ch, 1slst) on the left side, 2sc in the corner, only single crochet (in
front of the cabin), 2sc in the corner, (1ch, 1slst) on the right side , 2sc in the corner, only
single crochet (in back of the cabin).
The front and back of the roof will have an even edge, and the sidewalls will have a “small
tooth” edge.
Between the roof and the first row make slst with another color yarn (blue in example).
Between the 1st and 2nd row make slst with white furry yarn. Cut and hide the threads!
Chimney
Detail *1.
1: Dial a chain of 16 ch, close them in a ring, and then crochet 16sc. First you crochet the
chain, leave a long tail for sewing the chimney.
2: 16sc
3: 16sc
Between 2nd and 3rd row make slst with pink color yarn.
6: 24 FPDC, 1slst.
Between the 6th and 7th row, crochet 1 row with slst in the desired color (pink in the
example).
Detail *2.
1: 8sc in MR
2: 8inc=16
3: (1sc, inc)*8=24
Sew part * 2 from above to part * 1, gripping the back half loops. On the remaining front
half-loops, along the edge of the chimney, make slst with white furry yarn. Cut and hide the
threads! Also notice that it is pressed part # 2 into the pipe a bit. Focus on the photo!
1: 6sc in MR
2: 6inc=12
3: (1sc, inc)*6=18
4: (inc, 2sc)*6=24
3: (1sc-white, inc-blue)*6=18
Sew the 2 parts (rear part and front part) capturing only the back half-loops of both parts.
Insert toothpicks between the parts of the locomotive base. Try on the wheels, if everything
is even and symmetrical, apply glue to the side, then to the toothpick. Stick on the wheel.
Trim the protruding ends of the toothpick and glue a half-bead in the center of the wheel.
This will prevent coming out the toothpicks. Attach the rest of the wheels in the same way.
The wheels can be simply glued or sewn on without toothpicks, but they will wrap and the
locomotive will stand crooked. Toothpicks are here for stiffening.
Tow bar:
Cut off a piece of wire, mine is 5cm. Insert the wire at the back of the locomotive, between
the base parts, in the center. Apply glue in the place where the wire exits, glue the thread
and wrap the wire around it. Bend the wire up, the bent end is about 1 cm, cut off the
excess. Glue the end of the thread and cut it too.
Decorate the train! You can glue snowflakes and half-beads on the sides of the cabin.
Optional color (brown in the example). Each row begins with 1ch.
1: 18ch and from the second ch from hook: 17sc, turn
Crocheting sc on three sides and in the corners make: 1sc, 1ch, 1sc. The number of sc must
be the same on both parts!
Connect the two parts : Fold the wrong side inside, the cardboard base between them, sew
together, with optional color (pink color yarn in the example).
Wagon – walls:
1: BLO 56sc
11: make slst with white furry yarn. Cut and hide the threads!
Between the 6th and 7th row, crochet 1 row with slst in the desired color (pink in the
example).
To do this, dilute PVA glue with warm water, in a 1: 1 ratio. Apply with a brush to the inside of
the carriage. Straighten the walls, giving the carriage a rectangular shape. Apply two coats,
letting each dry well. Don’t apply on the furry yarn!
Crochet four wheels, just like for a steam locomotive. In the example are used white and
pink yarn colors. Attach the wheels to the wagon. On one side of the car, make a hitch, just
like for a steam locomotive. Dial 15ch and attached them to the bottom of the car in the
form of a loop (photo). Decorate as desired.
Crocheting sc on three sides and in the corners make: 1sc, 1ch, 1sc. The number of sc must
be the same on both parts!
Crochet another one.
Connect the two parts : Fold the wrong side inside, the cardboard base between them, sew
together, with optional color (pink color yarn in the example).
Platform – walls:
1: BLO 62sc
4: make slst with white furry yarn. Cut and hide the threads!
Starch the walls to keep their shape, just like the carriage.
Crochet four wheels. In the example are used white and light purple yarn colors. Attach the
wheels to the platform. On one side of the platform, make a hitch. Dial 15ch and attached
them to the bottom in the form of a loop (photo). Decorate as desired.
Christmas tree
1: 6sc in MR
2: 6inc=12
3: BLO 12sc
4-6: 12sc
Change color to green.
7: 12inc=24
8: (Зsc, inc)*6=30
9: (4sc, inc)*6=36
According to the size of the resulting circle, cut out the base from thick cardboard.
13-14: 48sc
Stuff and put the cardboard base on the bottom. Next, stuff the tree while as you work!
17-18: 42sc
21-22: 36sc
25-26: 30sc
29-30: 24sc
33-34: 18sc
37-38: 12sc
Crochet in the remaining front loops (FLO) in the rows: 15, 19, 23, 27, 31, 35 and 39: (1slst +
3ch + 2dc) – in the same stitch, skip 2 stitches, repeat to the end of the row, finish with slst in
the first loop of the row.
Lay the Christmas tree on the platform and tie it crosswise with a string, securing it at the
corners.
Due to the fact that the pattern is placed on 12 loops, and we crochet on 11, the stripes are
displaced and twisted in a spiral. Change the colors as wheels.
Dial 11ch close in a ring with 1slst and crochet 3sc white, 3sc red, 3sc white, 3sc red. Make
22 rows. At the end crochet 5 decreases with white yarn.
Cut a piece of wire to the length of the candy, insert it and stuff a little. Sew the hole . Bend
the tip.
Crochet the desired number of candies using any colors you like.
Take a white thread and crochet in the same ring: 1sc, 1hdc, 2dc. Tighten the ring.
Continue work with white thread, in back of the loops green, 2dc in each loop. Having
crocheted all the loops, put off the white thread and crochet in green along the white loops,
also 2dc in each loop. Thus, alternate crocheting with one or another color, until get a spiral
of the desired diameter. In the example are : green 8 times of 2dc in each loop, white 22
times 2dc in each loop.
Having crocheted the required number of stitches in green, finish the row like this: 2hdc, 2sc,
2slst.
Having crocheted the required number of stitches in white, finish the row like this: 2hdc, 2sc,
pick up the left green thread on the hook and crochet 1slst. Tighten the green loop well and
crochet another 1slst.
Crochet the second part. Cut out two cardboard circles to size.
Wrap the white thread on a stick of about 5 cm and fix it with glue.
Crochet one part in dark green with sc in the back loop only. Cut the thread, leaving a tail for
sewing. Sew the parts together, grabbing the front loop for the first part, and the back loop
for the second part. Place the cardboard bases inside, adding a little filler between them.
After sewing 4-5 loops, glue the stick. Cover the end with glue and insert between the
cardboards at the beginning of stitching.
Press well, sew the parts to the end. Crochet the desired number of candies using any colors
you like!