UDC 621.882.211 October 1989
High-strength hexagon head bolts
with large widths across flats for structural steel bolting
Sechskantschrauben mit groBen Schlsselweiten; Supersedes March 1979
HV-Sehrauben in Stahikonstruktionen edition.
In keeping with current practice in stondards published by the International Organization for Standardization (ISO).
2 comma has been used throughout as the decimal marker.
Dimensions in mm
1 Scope and field of application
High-strength hexagon head bolts are intended for use in GV and SL. structural steel bolting in accordance with
DIN 18800 Part 1, together with DIN 6915 hexagon nuts and DIN 6916, DIN 6917 or DIN 6918 washers.
2. Dimensions
Le
14
= 2P maximum; incomplete thread,
Marking
Aja | gl
Datum line for dy
Continued on pages 2 t0 6
288Page 2 DIN 6914
Table
Thread size [wig [wie ma0| waa [waa wa? | _w30 | 36
Py 1s [2 25 25 3 35. corer]
(auxiliary 2 28 a 2 34 a0 a8
dimension) 3 23 34 3 42 50
€ ‘an oa oa Oa oa oa
06 08 08. 08 [08
Z ima 152 26 28 35 ai
Nominal size [12 22 24 20 36
a 413 1948 _[ 21,16 | 2348 | 2816 | 29,16 | a5
Es 127 2084 | 2204 | 2484 | 27.84 | a0g4 | a7
Za 20 34 39 435 [475 | s7
[en 2391 ‘3503_| 9058 | 4820 | —s0as | s8a7 | —eaaa
8 4 15 17 19 23
k 155 13a 14 164 1795 | 2198
x | 645 149) 159 179_| 2005 | 2405,
ecsraece eaceaaea|sc1828 aa7_|—_917_| 987 | 11.27 | 1256 | 1838
a me 12 15. 15: 2 2 2
soma | 26 a 46 50 60
26 35 0 a a 3aB
Shank lengihs, 7) andl,
blk (see ete ate aie (alu eel elena ela
375|_9
75) 14
113.75] 19 at ia ae
rr675| 22
217527
2675132
isi75| 37
[3675] 42
lan 7s|_47
61.75)
(66.75)
32
37 |
5675) 62
67
72
i02
107 | 16
ale 412 [121 [10
ifs 17 | 126
122 | 131
79 | 127 | 136,
7 132 | 141
189.6 | haz p46
1946 | 142 | 181 [1375] 148 | 128
[199.6 147 | 156 [1426) 199 | 199
204.6 Hise 161 [147 5) 158 [136
‘Commercial sizes of hexagon head bolis are those for which shank lengths have been specified
Tams ~9P.
2M geas = lami vie ~ 8:
1) P= pitch of thread (coarse thread)
2) For lengths above the continuous stepped line
3) For lengths below the continuous stepped line.
4) The maximum value of dy shall not exceed the actual width across flats
2893. Technical delivery conditions
DIN 6914 Page 3
Material
Stee!
General requirements
As specified in DIN 267 Part 1.
Tolerance
6
Thread re -
As specified in DIN 13 Parts 12 and 15.
eee Property class 109
tera As specified in 150 898 Part 1
Limit deviations and Product sais 7
geometrical tolerances ies
ISO 4759 Part 1
‘Surface finish
As processed.
DIN 267Part 10 shall apply with regard to hot dip galvanizing
‘Acceptance inspection
As specified in DIN 267 Part 5.
4 Designation
Designation of an M 20 hexagon head bolt with large width across flats, of nominal length, = 100mm:
Hexagon head bolt DIN 6914 — M20 x 100
The DIN 4000 - 2 - 1 tabular layout of article characteristics shall apply for bolts covered in this standard.
5 Marking
Bolts shall be marked in accordance with ISO 898 Part 1 and shall additionally bear the symbol ‘HV’,
290Page 4 DIN 6914
6 Mass
The values given should be regarded as guideline values.
[Thveadsize a] mt2 M16 M20 M22 M24 mar M30 M36
lee Mass (7 85 kg/d), in kg par 1000 units, ~
0 a
35 536 eu
40 580 105
5 21 113
50 656 721
55 710 129
co | 754 137,
65 739 145
70 B43 153
75 888 160
80 93.2 168
85 976 176
90 02 1384
95. 107 192
199
207
215
723
231
230
247
2917. Grip lengths
DIN 6916 washer
DIN 6914 Page 5
DIN 6915
hexagon serew
[Thread size (a
M26 M27 M30 M36
Nominal
length, 1
Grip length,
55 to 57] S410 66
2| e7 to 91| B4 to 66] 81 to 85
[sz to 53] 48 to 52
54 to 58] 6910 97] «
59 to 63 58 10 60
G4 to 68] 61 to 65
69.1073
74 to
79 to
to 96] 69 to 93
‘86.10 90]
“94 to 98| 91 to 95] 87 to 91
(99 to 103] 96 to 100 6 ° 8
[704 to 108 [10% to 105 9 to 93
[106 to 110 94 1098
Fit to 115 | 107 to 111] 99 to 109
116 to 120 | 112 to 116) 104 to 108
424 to 425 [147 to 121] 109 (0 119
126 to 130] 122 10 126
431 to 195 | 127 to 191] 119 to 123,
136 to 140] 124 t0 128
199.1
134 t
154 40 158 151 to 156][ 147 to 151 | 199 t0 14
156 to 160 | 152 to 156 | 144 to 148
‘The tolerances on length have been taken into consideration when calculating the grip lengths.
292Page 6 DIN 6914
Standards referred to
DIN 13Part 12 ISO metric screw threads; coarse and fine pitch threads from 1 to 300mm diameter; selection of
diameters and pitches
DIN. 13Part 18 ISO metric serew threads; fundamental deviations and tolerances for screw threads of 1 mm diameter
‘and larger
DIN. 78 ‘Thread ends end lengths of projection of bolt ends for ISO metric screw threads in accordance with
DIN 13,
DIN 267 Part 1 Fasteners; technical delivery conditions; general requirements
DIN 267 Part 5 Fasteners; technical delivery conditions; acceptance inspection (modified version of ISO 3269, 1984
edition)
DIN 267 Part 10 Fasteners; technical delivery conditions; hot dip galvanized components
DIN 4000 Part 2. Tabular layout of article characteristics for bolts, screws and nuts
DIN 6915 High-strength hexagon nuts with large widths across flats for structural steel bolting
DIN 6916 Round washers for high-strength structural steel bolting
DIN 6917 ‘Square taper washers for high-strength structural stee! bolting of steel | sections
DIN 6918 Square washers for high-strength structural bolting of steel U sections
DIN 18800 Part 1 Steel structures; dimensions and design
180 898 Part 1 Mechanical properties of fasteners; bolts, screws and studs
180 4759 Part 1 Tolerances for fasteners; bolts, screws and nuts with thread diameters >1,6 and <150 mm and prod:
uct grades A, B and C
Previous editions
DIN 6914: 08.62, 12,70, 03.79.
Amendments
‘The following amendments have been made to the March 1979 edition:
28) A datum line for determining the bearing face diameter, dy ,has been included.
b) Shank diameter d, is now specified
) Limits of size are now specified
4d) Shank lengths and Ug are now specified
) A surface finish as specified in DIN 267 Part 9 is no longer specified.
f} The standard has been editorially revised
International Patent Classification
£048 1/38
F 168 35/00
F 1685/02
F 168 .23/00
293