Professional Documents
Culture Documents
WP 3000
SERIES
Specifications
Pedestrian Pallet Truck
C WP 3000 Series Pedestrian Pallet Truck
WP 3010
brake brake
override
drive
brake
Q
1.6
4.9 1.8
125
86
159 1.9
4.22a
4.35
4.22
4.21 4.25
4.20 4.22
100 4.19 100
4.33 / 4.34
C WP 3000 Series Pedestrian Pallet Truck
brake brake
override
drive
brake
Q
1.6
4.9
1.8
130
83
190 1.9
4.22a
4.35
4.22
4.21 4.25
4.20 4.22
100 4.19 100
4.33 / 4.34
WP 3000 Series Specifications
Table 1 WP 3010-1.6
1.6 Load Centre c mm 400 500 600 600 600 700
1.8 Load Distance 1 raised x mm 556 756 906 956 1056 1156
1.9 Wheel Base 1 raised y mm 897 1097 1247 1297 1397 1497
2.1 Weight less battery kg 279 283 288 290 293 295
front kg 579 695 728 779 869 840
2.2 Axle Load w. load
rear kg 1456 1344 1316 1267 1180 1211
front kg 301 322 335 339 347 353
2.3 Axle Load w.o. load
rear kg 134 117 109 106 103 99
4.19 Overall Length l1 mm 1300 1500 1650 1700 1800 1900
4.22 Fork Length l mm 800 1000 1150 1200 1300 1400
4.35 Turning Radius 1 raised Wa mm 1080 1280 1430 1480 1580 1680
Standard Equipment 5. Battery roll out function to Electrical System and The lift limit switch avoids
1. X10® control handle places both sides (250 Ah and e-GEN® Braking unnecessary energy
all truck functions at the 375 Ah compartment only, A heavy-duty 24-volt fused consumption, reduces noise
operator’s fingertips increases headlength by electrical system provides emissions and prevents the lift
2. 24-Volt fused electrical 32 mm; not with load optimum travel and lift speeds. linkage from undue stress.
system backrest) The transistor control is sealed
3. e-GEN® Braking System 6. Rubber drive wheel from dirt, dust and moisture Operator Controls
offers regenerative and 7. Sipped rubber drive wheel for trouble-free operation. An The WP’s robust X10® control
frictionless electric braking (WP 3015, WP 3020) on-board diagnostic system handle is designed to allow for
4. Electric parking brake 8. SuperTrac® drive wheel reduces troubleshooting times an optimum turning radius with
9. Vulkollan® tandem load to a minimum. An optional low steer effort. All control
5. Maintenance free 3-phase
wheels handset allows various buttons can be operated with
(AC) traction motor
performance levels to be either hand and can be
6. 150 Ah battery compart- 10. On-board charger 35 Amp
tailored to the requirements of accessed with minimum hand
ment (WP 3010, WP 3015); (WP 3010)
the customer and application. and wrist movement. The horn
250 Ah battery compart- 11. Sealed on-board charger
The e-GEN® braking system buttons are integrated in the
ment (WP 3020) 30 Amp (WP 3015, WP
utilises the power of the high- hand grips. An ergonomic
7. Rabbit/turtle switch 3020, 150 Ah and 250 Ah
torque AC traction motor to forward/reverse thumb wheel
incorporates two levels of compartments only)
stop the truck and keep it allows for precise speed
programmable travel 12. Keypad static until a travel input is control.
performance 13. InfoLink® Ready (WP 3010 requested, even when A rabbit/turtle switch allows
8. Brake override zone, travel requires load backrest) operating on a gradient. operators to select a travel
possible in upper brake 14. Load backrest speed range to match
zone at creep speed (WP 3015, WP 3020, Drive unit operating conditions.
9. Key switch lift out only, increases
The heavy duty gearbox is
10. Horn button in each headlength by 50 mm)
designed for minimum noise. Brake Override Function
handgrip (WP 3010 increases overall
A rugged helical gear set For easy operation in tight
11. Battery connector width by 12 mm)
delivers trouble free operation areas a brake override function
SBE 160 red 15. Special paint and long life. The transistor is incorporated, which allows
12. Emergency disconnect 16. Welded fork marks control module works in the WP to be driven safely and
13. Vulkollan drive tyre and 17. Pallet entry rollers (only conjunction with the AC drive precisely at creep speed with
single load wheels with single load wheels) motor to provide responsive the handle in a near vertical
14. Spring-loaded 18. Work Assist™ Accessories acceleration and precise position.
polyurethane castor wheels control.
15. Safety reverse switch Frame & Chassis Safety Regulations
16. Battery discharge indicator The optimised steel structure Battery and Charger Conforms to European safety
with lift lockout and for the chassis and fork The battery is safely located in standards.
integrated hourmeter and assembly features a 5 year a fully enclosed battery Dimensions and performance
fault code readout warranty. Removable steel compartment. The battery and data given may vary due to
17. Ramp hold covers ensure internal connector are easily manufacturing tolerances.
18. Steel covers components are protected accessible. The battery lid can Performance is based on an
against impacts yet easily be easily hinged open or average size vehicle and is
19. Fork tip indicators
accessible for service. removed. Optional on-board affected by weight, condition
chargers are available. of truck, how it is equipped
Optional Equipment
Wheels and Tyres and the conditions of the
1. 250 Ah battery compart-
The adjustable polymer Hydraulic Lift System operating area. Crown
ment (WP 3015);
dampers of the castors give The heavy-duty hydraulic products and specifications
375 Ah battery compart-
the drive wheel excellent grip motor with integral pump and are subject to change without
ment (WP 3020)
and provide the truck with reservoir provide efficiency and notice.
2. Battery connector optimum stability. The durability. The flow control
DIN 160 A Vulkollan load wheels valve allows for smooth
3. Freezer conditioning -30°C incorporate a debris cover lowering even when the truck
operating temperature to protect the bearing. is fully loaded. A relief valve
(WP 3015, WP 3020) protects the components and
4. Fork length and spread chassis from overloading.
options
European Manufacturing: