Professional Documents
Culture Documents
Foretrex 601/701 Ballistic Edition: Owner's Manual
Foretrex 601/701 Ballistic Edition: Owner's Manual
Owner’s Manual
© 2017 Garmin Ltd. or its subsidiaries
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its
products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates
and supplemental information concerning the use of this product.
Garmin , the Garmin logo, ANT+ , Foretrex , TracBack , and VIRB are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. Garmin Connect™, Garmin
® ® ® ® ®
Express™, QuickFit and tempe™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin.
®
Applied Ballistics and Applied Ballistics Elite are registered trademarks of Applied Ballistics, LLC. Apple and Mac are trademarks of Apple Inc., registered in the U.S. and other countries. The
® ® ® ®
Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Garmin is under license. Windows is a registered trademark of Microsoft Corporation in the
® ®
United States and other countries. Other trademarks and trade names are those of their respective owners.
This product is ANT+ certified. Visit www.thisisant.com/directory for a list of compatible products and apps.
®
Table of Contents Clearing the Drop Scale Factor Table .................................... 5
Editing the Muzzle Velocity and Temperature Table ............. 6
Introduction.....................................................................1 Clearing the Muzzle Velocity and Temperature Table ........... 6
Device Overview ......................................................................... 1 Deleting a Profile .................................................................... 6
Installing the Batteries ................................................................ 1 Menu Page Options .................................................................... 6
Long-Term Storage ................................................................ 1 Device Settings ...................................................................... 6
Attaching the Wrist Strap ............................................................ 1 Jumpmaster ........................................................................... 7
Keys ............................................................................................ 1 Connected Features....................................................... 7
Turning On the Device ........................................................... 1 Pairing a Smartphone with Your Device ..................................... 7
Acquiring Satellite Signals ..................................................... 1 Optional Fitness Accessories....................................... 7
Using the Backlight ................................................................ 1
Pairing Your ANT+ Sensors ....................................................... 7
Main Pages ................................................................................. 1
Tips for Pairing ANT+ Accessories with Your Garmin Device .... 7
Status Icons ........................................................................... 2
tempe .......................................................................................... 7
Map Page ............................................................................... 2
Displaying tempe Data ........................................................... 7
About the Compass ............................................................... 2
Applied Ballistics .................................................................... 2 Device Information......................................................... 8
Using the Countdown Timer ....................................................... 2 Specifications .............................................................................. 8
VIRB® Remote ........................................................................... 2 Viewing Device Information ........................................................ 8
Controlling a VIRB Action Camera ......................................... 2 Viewing Satellites ........................................................................ 8
Device Care ................................................................................ 8
Waypoints, Routes, and Tracks.................................... 2
Cleaning the Device ............................................................... 8
Waypoints ................................................................................... 2
Data Management ...................................................................... 8
Creating a Waypoint .............................................................. 2
Connecting the Device to Your Computer ............................. 8
Navigating to a Waypoint ....................................................... 3
Transferring Files to Your Device .......................................... 8
Measuring the Distance Between Two Waypoints ................ 3
Deleting Files ......................................................................... 8
Editing a Waypoint ................................................................. 3
Disconnecting the USB Cable ................................................ 8
Projecting a Waypoint ............................................................ 3
Receiving Data Wirelessly ..................................................... 8
Deleting a Waypoint ............................................................... 3
Sending a Route Wirelessly ................................................... 9
Deleting All Waypoints ........................................................... 3
Sending a Waypoint Wirelessly ............................................. 9
Viewing Celestial Data and Almanacs ................................... 3
Viewing the Nearest Waypoints ............................................. 3 Troubleshooting............................................................. 9
Routes ........................................................................................ 3 Product Updates ......................................................................... 9
Creating and Navigating a Route ........................................... 3 Setting Up Garmin Express ................................................... 9
Viewing Saved Routes ........................................................... 3 Improving GPS Satellite Reception ............................................ 9
Deleting All Routes ................................................................ 3 Maximizing Battery Life ............................................................... 9
Tracks ......................................................................................... 3 My device is in the wrong language ........................................... 9
Recording a Track .................................................................. 3 Resetting the Device ................................................................... 9
Navigating a Saved Track ...................................................... 3 Restoring All Default Settings ..................................................... 9
Using the Pan and TracBack® Feature ................................. 3 Appendix......................................................................... 9
Viewing Track Details ............................................................ 4 Data Fields .................................................................................. 9
Editing the Name of a Track .................................................. 4 Applied Ballistics Glossary of Terms ........................................ 10
Clearing the Active Track ....................................................... 4
Deleting a Track ..................................................................... 4
Index.............................................................................. 13
Deleting All Tracks ................................................................. 4
Customizing Your Device.............................................. 4
Adjusting the Backlight Timeout ................................................. 4
Map Options ............................................................................... 4
Map Detail Settings ................................................................ 4
Compass Options ....................................................................... 4
Calibrating the Compass ........................................................ 4
Customizing the Data Fields .................................................. 4
Elevation Options ........................................................................ 4
Calibrating the Barometric Altimeter ...................................... 4
Trip Computer Options ............................................................... 4
Resetting the Trip Computer .................................................. 4
Applied Ballistics Options ........................................................... 4
Customizing the Range Card Fields ...................................... 5
Editing the Range Increment ................................................. 5
Setting the Base Range ......................................................... 5
Editing the Target Card .......................................................... 5
Changing the Target .............................................................. 5
Editing the Name of a Target ................................................. 5
Selecting a Different Profile ................................................... 5
Adding a Profile ...................................................................... 5
Editing Bullet Properties ......................................................... 5
Editing Gun Properties ........................................................... 5
Table of Contents i
Introduction Keys
WARNING
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
Device Overview
Hold to turn the device on and off, enter night vision mode,
POWER and enter watch mode.
Select to turn the backlight on and off.
Select to scroll through the main pages in sequence.
PAGE Select to go back to the previous view from a menu or option.
GOTO Hold to navigate to a waypoint.
Battery cover D-ring Select to open the menu for the page.
Micro-USB port (under battery cover) ENTER Hold to mark a waypoint.
MARK
Select to scroll through menus and pages.
Installing the Batteries Select to zoom out or zoom in on the map page.
You can use alkaline, NiMH, or lithium AAA batteries. Use NiMH
or lithium batteries for best results.
1 Loosen the fabric strap that covers the battery door. Turning On the Device
2 Turn the D-ring counter-clockwise, and pull up to open the Hold POWER.
battery door.
The first time you turn on the device, you will select the
3 Insert two AAA batteries, observing polarity. device language.
Acquiring Satellite Signals
Before you can use GPS navigation features, you must acquire
satellite signals.
When you turn on your navigation device, the GPS receiver
must collect satellite data and establish the current location. The
time required to acquire satellite signals varies based on several
factors, including how far you are from the location where you
last used your navigation device, whether you have a clear view
NOTE: You should verify the gasket and battery of the sky, and how long it has been since you last used your
compartment are free of debris. navigation device. The first time you turn on your navigation
4 Close the battery door, and turn the D-ring clockwise. device, it may take several minutes to acquire satellite signals.
1 Turn on the device.
Long-Term Storage
When you do not plan to use the device for several months, 2 Wait while the device locates satellites.
remove the batteries. Stored data is not lost when batteries are It may take 30 to 60 seconds to acquire satellite signals.
removed. indicates GPS is located.
3 If necessary, go to an open area, away from tall buildings and
Attaching the Wrist Strap trees.
1 Insert the strap behind the pin at the top of the device. Using the Backlight
1 Select POWER.
The backlight turns on for 30 seconds.
2 Select POWER to turn off the backlight.
Main Pages
You can select PAGE to scroll through the main pages. You can
select ENTER to open the settings menu for each page. You
can select or to scroll through menus and pages and zoom
in and out.
Map page: The map page shows your position and heading on
the map (Map Page, page 2).
As you travel, the position icon moves and leaves a track log
(trail). Waypoint names and symbols appear on the map. The
device automatically rotates the map as you move so that
waypoints always appear above your position.
2 Pull the strap length through to the end. Compass page: The compass page guides you to your
3 Insert the strap behind the pin at the bottom of the device. destination by displaying a compass and bearing pointer.
4 If necessary, attach the strap extender to the wrist strap.
Introduction 1
When navigating, the compass page displays the name of 1 From the Applied Ballistics page, select ENTER > QUICK
the location, the distance to the final destination, the speed of EDIT.
travel, and a direction arrow in the compass ring. You can TIP: You can select or to edit each value, and select
follow the arrow to navigate. ENTER to move to the next field.
Elevation page: The elevation page shows your elevation. 2 Look directly into the wind to accurately set the DOF and
Trip computer: The trip computer displays your current speed, wind direction.
average speed, maximum speed, trip odometer, and other 3 Set the DOF to your actual direction of fire (either manually or
helpful statistics. by using the compass).
Menu page: The menu contains settings for waypoints, tracks, 4 Set the wind direction to DIR 12:00.
and routes, as well as other setup options.
5 Select PAGE to save your settings.
The menu page also displays the current time and date at the
top of the screen.
Using the Countdown Timer
Applied Ballistics page: This feature offers customized aiming
®
Before you can start the countdown timer, you must enable the
solutions for long-range shooting (Applied Ballistics,
timer page (Device Settings, page 6), and set timer
page 2).
preferences (Timer Settings, page 6).
NOTE: This feature is available only on the Foretrex 701
1 From the timer page, select ENTER to start the countdown
device.
timer.
Status Icons NOTE: You can select or to change the time interval.
Status icons appear on the main pages. A flashing icon means 2 Select ENTER to stop the countdown timer.
the device is searching for a signal. A solid icon means the
NOTE: When the time reaches 00:00, you can select ENTER
signal was found or the sensor is connected.
to use the timer as a stopwatch and start counting up.
GPS status
3 If necessary, select to reset the countdown timer to the
Battery level original time interval.
Heart rate monitor status
Speed and cadence sensor status VIRB Remote
®
Deleting All Waypoints While navigating, you can use the TracBack feature to navigate
back to the beginning of your activity. This can be helpful when
From the menu page, select SETUP > RESET > DELETE
finding your way back to camp or the trail head.
ALL WAYPOINTS > YES.
1 From the menu page, select TRACKS > PAN &
Viewing Celestial Data and Almanacs TRACBACK.
You can view daily almanac information for the sun and moon, 2 To pan the track log, select or .
and hunting and fishing.
3 Select ENTER to view additional options.
1 From the menu page, select WAYPOINTS > LIST ALL.
4 Select an option:
2 Select a waypoint.
• To begin navigating the current track, select GO.
3 Select OPTIONS.
• To mark a waypoint, select MARK.
4 Select an option:
• To zoom in and out, select ZOOM, and select or .
• To view the predicted best dates and times for hunting
• To navigate back to the beginning of your activity, select
and fishing at your current location, select HUNT/FISH.
TRACBACK.
• To view the sunrise, sunset, moonrise, moonset, and
moon phase for a specific date, select SUN/MOON.
2 Select ENTER > QUICK EDIT. velocity prior to the drop scale factor. Calibrating the
3 Select or , and select ENTER to edit a target. muzzle velocity provides a more accurate solution in the
supersonic range for your specific firearm.
4 Select ENTER to edit information about the target.
• To calibrate the drop scale factor, select CALIBRATE
Changing the Target DSF, enter the range and true drop, and select USE.
1 From the Applied Ballistics page, select ENTER > TARGET > NOTE: Calibrating the drop scale factor provides a more
TARGET > CHANGE TARGET. accurate solution at or beyond the transonic range for your
2 Select a target. specific firearm.
The long-range shooting conditions for the selected target 4 Select VIEW DSF TABLE to review the drop scale factor
appear. table based on Mach speeds and calibrated drop scale factor
values.
Editing the Name of a Target 5 Select MV-TEMP TABLE to review muzzle velocity
From the Applied Ballistics page, select ENTER > TARGET > adjustments based on the ambient temperature.
TARGET > EDIT NAME.
Clearing the Drop Scale Factor Table
Selecting a Different Profile The drop scale factor table is populated after you calibrate the
1 From the Applied Ballistics page, select ENTER > PROFILE. drop scale factor. If necessary, you can reset the table values to
2 Select your current profile. zero.
A list of profiles appears.
page 7). From the menu page, select SETUP > SYSTEM.
PHONE: Allows you to pair a smartphone with your device GPS MODE: Sets the satellite system to GPS, GPS +
(Pairing a Smartphone with Your Device, page 7). GLONASS, GPS + GALILEO, ULTRATRAC, or DEMO (GPS
off). The ULTRATRAC option records track points and sensor
GPS: Displays the satellite signal strength or the satellite sky data less frequently.
view (Viewing Satellites, page 8).
WAAS: Enables the system to use Wide Area Augmentation
JUMPMASTER: Allows you to select the jump type System/European Geostationary Navigation Overlay Service
(Jumpmaster, page 7). (WAAS/EGNOS) data.
Device Settings BEEPER: Sets the beeper to sound for key tones and
From the menu page, select SETUP. messages or messages only.
APPLIED BALLISTICS: Allows you to customize the BATTERY: Allows you to change the type of AAA battery you
atmospheric conditions for your environment, shooting are using.
conditions for your target, gun and bullet properties for your LANGUAGE: Sets the text language on the device.
profile, output units of measure for your profile, and input SPANNER: Allows you to use the device USB port with most
units of measure for the Applied Ballistics page (Applied NMEA 0183-compliant mapping programs by creating a
®
Connected Features 7
1 Pair your tempe sensor (Pairing Your ANT+ Sensors, TIP: For more information, go to www.garmin.com/fitandcare.
page 7).
2 Customize data fields to display the temperature data Data Management
(Customizing the Data Fields, page 4). NOTE: The device is not compatible with Windows 95, 98, Me,
®
Do not use a sharp object to clean the device. the Trash folder to completely remove the files.
Avoid chemical cleaners, solvents, and insect repellents that can Disconnecting the USB Cable
damage plastic components and finishes. If your device is connected to your computer as a removable
Always wipe the device dry after cleaning or use, and store it in drive or volume, you must safely disconnect your device from
a cool, dry place. your computer to avoid data loss. If your device is connected to
Do not store the device where prolonged exposure to extreme your Windows computer as a portable device, it is not necessary
temperatures can occur, because it can cause permanent to safely disconnect the device.
damage. 1 Complete an action:
• For Windows computers, select the Safely Remove
Cleaning the Device Hardware icon in the system tray, and select your device.
1 Wipe the device using a cloth dampened with a mild • For Apple computers, select the device, and select File >
detergent solution.
Eject.
2 Wipe it dry.
2 Disconnect the cable from your computer.
After cleaning, allow the device to dry completely.
Receiving Data Wirelessly
1 The device withstands incidental exposure to water of up to 1 m for up to 30 min.
Before you can receive data wirelessly, you must be within 3 m
For more information, go to www.garmin.com/waterrating.
(10 ft.) of a compatible Garmin device.
8 Device Information
Your device can receive waypoints and routes when connected 1 From the menu page, select three times.
with a compatible Garmin device. 2 Select ENTER.
From the menu page, select CONNECT > RECEIVE 3 Select five times.
WIRELESSLY.
4 Select ENTER.
When a compatible Garmin device is found, the status
changes from CONNECTING to RECEIVING DATA. When 5 Select four times.
data is received, the status changes to TRANSFER 6 Select ENTER.
COMPLETE. 7 Select your language.
Sending a Route Wirelessly
Before you can send a route wirelessly, you must be within 3 m Resetting the Device
(10 ft.) of a compatible Garmin device. You can reset the device if it stops responding. This does not
1 From the menu page, select ROUTES > LIST ALL. erase any of your data or settings.
2 Select a route. Hold POWER for 10 seconds.
3 Select SEND.
Restoring All Default Settings
Sending a Waypoint Wirelessly You can reset all settings back to their factory default values.
Before you can send a waypoint wirelessly, you must be within From the menu page, select SETUP > RESET > RESTORE
3 m (10 ft.) of a compatible Garmin device. DEFAULTS > YES.
1 From the menu page, select WAYPOINTS > LIST ALL.
2 Select a waypoint. Appendix
3 Select OPTIONS > SEND.
Data Fields
Troubleshooting AMB PRESS: The uncalibrated ambient pressure.
AVG ASCENT: The average vertical distance of ascent since
Product Updates the last reset.
On your computer, install Garmin Express™ (www.garmin.com AVG DESCNT: The average vertical distance of descent since
/express). On your smartphone, install the Garmin Connect the last reset.
Mobile app. BAROMETER: The calibrated current pressure.
This provides easy access to these services for Garmin devices: BEARING: The direction from your current location to a
• Software updates destination. You must be navigating for this data to appear.
• Data uploads to Garmin Connect CADENCE: Cycling. The number of revolutions of the crank
arm. Your device must be connected to a cadence accessory
• Product registration
for this data to appear.
Setting Up Garmin Express COURSE: The direction from your starting location to a
1 Connect the device to your computer using a USB cable. destination. Course can be viewed as a planned or set route.
2 Go to www.garmin.com/express. You must be navigating for this data to appear.
3 Follow the on-screen instructions. ELEVATION: The altitude of your current location above or
below sea level.
Improving GPS Satellite Reception FINAL DEST: The last point on the route or course.
• Frequently sync the device to your Garmin Connect account: FINAL DIST: The remaining distance to the final destination.
You must be navigating for this data to appear.
◦ Connect your device to a computer using the USB cable
and the Garmin Express application. FINAL ETA: The estimated time of day when you will reach the
final destination (adjusted to the local time of the destination).
◦ Sync your device to the Garmin Connect Mobile app using
You must be navigating for this data to appear.
your Bluetooth enabled smartphone.
FINAL ETE: The estimated time remaining until you reach the
While connected to your Garmin Connect account, the device
final destination. You must be navigating for this data to
downloads several days of satellite data, allowing it to quickly
appear.
locate satellite signals.
GLIDE RATIO: The ratio of horizontal distance traveled to the
• Take your device outside to an open area away from tall
change in vertical distance.
buildings and trees.
GR DEST: The glide ratio required to descend from your current
• Remain stationary for a few minutes.
position to the destination elevation. You must be navigating
for this data to appear.
Maximizing Battery Life
HEADING: The direction you are moving.
You can do several things to extend the life of the batteries.
HEART RATE: Your heart rate in beats per minute (bpm). Your
• Use premium batteries. device must be connected to a compatible heart rate monitor.
• Reduce the backlight timeout (Device Settings, page 6). MAX ASCENT: The maximum rate of ascent in feet per minute
• Turn off the beeper (System Settings, page 6). or meters per minute since the last reset.
• Turn off the compass when not in use (Device Settings, MAX DESCNT: The maximum rate of descent in meters per
page 6). minute or feet per minute since the last reset.
MAX ELEVTN: The highest elevation reached since the last
My device is in the wrong language reset.
You can change the device language selection if you have MAX SPEED: The highest speed reached since the last reset.
accidently selected the wrong language on the device.
Troubleshooting 9
MAX TEMP: The maximum temperature recorded in the last TIP: You can use the compass to set this value by pointing
24 hours from a compatible temperature sensor. the top of the device toward the direction of fire. The current
MIN ELEVTN: The lowest elevation reached since the last reset. compass value appears in the DOF field. You can select
ENTER to use this value. You can manually enter a value by
MIN TEMP: The minimum temperature recorded in the last selecting or .
24 hours from a compatible temperature sensor.
NOTE: The DOF is used only for calculating the Coriolis
MOV'N AVG: The average speed while moving for the current effect. If you are shooting at a target less than 1,000 yards
activity. away, this input field is optional.
MOV'N TIME: The total time moving for the current activity. ELEVATION: The vertical portion of the aiming solution,
NEXT DEST: The next point on the route. You must be displayed in milliradians (mil) or minute of angle (MOA).
navigating for this data to appear. RNG: The distance to the target, displayed in yards or meters.
NEXT DIST: The remaining distance to the next waypoint on the Input field.
route. You must be navigating for this data to appear. W 1/2: The wind speed 1, wind speed 2, and wind direction. For
NEXT ETA: The estimated time of day when you will reach the example, if the wind direction is DIR 9:00, the wind is blowing
next waypoint on the route (adjusted to the local time of the left to right as viewed by the shooter. Input field.
waypoint). You must be navigating for this data to appear. NOTE: The wind speed 2 field is optional. Using both wind
NEXT ETE: The estimated time remaining until you reach the speed 1 and wind speed 2 is not an effective way to account
next waypoint on your route. You must be navigating for this for different wind speeds at different distances between you
data to appear. and the target. Using these fields is a way to bracket (isolate)
ODOMETER: A running tally of the distance traveled for all trips. the wind values and calculate minimum and maximum
This total does not clear when resetting the trip data. windage values for the solution.
OFF COURSE: The distance to the left or right by which you WINDAGE 1: The horizontal portion of the aiming solution
have strayed from the original path of travel. You must be based on the wind speed 1 and wind direction, displayed in
navigating for this data to appear. milliradians (mil) or minute of angle (MOA).
OVER'L SPD: The average speed for the current activity, WINDAGE 2: The horizontal portion of the aiming solution
including both moving and stopped speeds. based on the wind speed 2 and wind direction, displayed in
milliradians (mil) or minute of angle (MOA).
SPEED: The current rate of travel.
Additional Output Fields
STOP TIME: A running tally of the time spent not moving since
the last reset. AERO JUMP: The amount of the elevation solution attributed to
aerodynamic jump. Aerodynamic jump is the vertical
SUNRISE: The time of sunrise based on your GPS position.
deflection of the bullet due to a crosswind. If there is no
SUNSET: The time of sunset based on your GPS position. crosswind component or wind value, this value is zero.
TEMPERATURE: The temperature of the air. Your body COS INCL: The cosine of the inclination angle to the target.
temperature affects the temperature sensor. Your device
DROP: The total drop the bullet experiences along its flight path,
must be connected to a tempe sensor for this data to appear.
displayed in inches.
TIME: The time of day based on your current location and time
H COR EFFECT: The horizontal Coriolis effect. The horizontal
settings (format, time zone, daylight saving time).
Coriolis effect is the amount of the windage solution
TO COURSE: The direction in which you must move to get back attributed to the Coriolis effect. This is always calculated by
on the route. You must be navigating for this data to appear. the device, although the impact may be minimal if you are not
TOTAL TIME: A running tally of the total time spent moving and shooting at extended range.
not moving since the last reset. LEAD: The horizontal correction needed to hit a target moving
TOT ASCENT: The total elevation distance ascended during the left or right at a given speed.
activity or since the last reset. TIP: When you enter the speed of your target, the device
TOT DESCNT: The total elevation distance descended during factors the necessary windage required into the total windage
the activity or since the last reset. value on the Applied Ballistics page.
TRIP ODOM: A running tally of the distance traveled since the MAX ORD: The maximum ordinance. The maximum ordinance
last reset. is the maximum height above the axis of the barrel that a
TURN: The angle of difference (in degrees) between the bearing bullet will reach along its flight path.
to your destination and your current course. L means turn MAX ORD RNG: The range at which the bullet will reach its
left. R means turn right. You must be navigating for this data maximum ordinance.
to appear. REM ENERGY: The remaining energy of the bullet at target
VERT SPEED: The rate of ascent or descent over time. impact, displayed in foot-pounds of force (ft. lbf) or joules (J).
VMG: The speed at which you are approaching a destination SPIN DRIFT: The amount of the windage solution attributed to
along a route. You must be navigating for this data to appear. the spin drift (gyroscopic drift). For example, in the northern
VSPD DEST: The rate of ascent or descent to a predetermined hemisphere, a bullet shot out of a right-hand twist barrel will
altitude. You must be navigating for this data to appear. always deflect slightly to the right as it travels.
TOF: The time of flight, which indicates the time required for a
Applied Ballistics Glossary of Terms bullet to reach its target at a given range.
NOTE: The Applied Ballistics feature is available only on the V COR EFFECT: The vertical Coriolis effect. The vertical
Foretrex 701 device. Coriolis effect is the amount of the elevation solution
attributed to the Coriolis effect. This is always calculated by
Shooting Solution Fields the device, although the impact may be minimal if you are not
DOF: The direction of fire, with north at 0 degrees and east at 90 shooting at extended range.
degrees. Input field. VEL MACH: The estimated velocity of the bullet when it impacts
the target, displayed as a factor of mach speed.
10 Appendix
VELOCITY: The estimated velocity of the bullet when it impacts BULLET LENGTH: The length of the bullet measured in inches.
the target. Input field.
Environment Fields BULLET WEIGHT: The bullet weight measured in grains. Input
AMB/STN PRESSURE: The ambient (station) pressure. field.
Ambient pressure is not adjusted to represent sea level DRAG CURVE: The Applied Ballistics custom drag curve, or the
(barometric) pressure. Ambient pressure is required for the G1 or G7 standard projectile models. Input field.
ballistics shooting solution. Input field. NOTE: Most long range rifle bullets are closer to the G7
TIP: You can manually enter this value, or you can select the standard.
USE CURRENT PRESSURE option to use the pressure Profile Fields, Gun Properties
value from the internal sensor in the device.
HORIZONTAL SIGHT SCALE FACTOR: A linear multiplier that
HUMIDITY: The percentage of moisture in the air. Input field. accounts for horizontal scaling. Not all rifle scopes track
LATITUDE: The horizontal location on the Earth's surface. perfectly, so the ballistics solution requires a correction to
Negative values are below the equator. Positive values are scale according to a particular rifle scope. For example, if a
above the equator. This value is used to calculate the vertical turret is moved 10 mil but the impact is 9 mil, the sight scale
and horizontal Coriolis drift. Input field. is 0.9. Input field.
TIP: You can select the USE CURRENT POSITION option to MUZZLE VELOCITY: The speed of the bullet as it leaves the
use the GPS coordinates from your device. muzzle. Input field.
NOTE: The LATITUDE is used only for calculating the NOTE: This field is required for accurate calculations by the
Coriolis effect. If you are shooting at a target less than 1,000 shooting solution. If you calibrate the muzzle velocity, this
yards away, this input field is optional. field may be updated automatically for a more accurate firing
TEMPERATURE: The temperature at your current location. solution.
Input field. OUTPUT UNITS: The output units of measure. A milliradian (mil)
TIP: You can manually enter the temperature reading from a is 3.438 inches at 100 yards. A minute of angle (MOA) is
connected tempe sensor or other temperature source. This 1.047 inches at 100 yards.
field does not automatically update when connected to a SIGHT HEIGHT: The distance from the center axis of the rifle
tempe sensor. barrel to the center axis of the scope. Input field.
WIND DIRECTION: The direction from which the wind is TIP: You can easily determine this value by measuring from
coming. For example, a DIR 9:00 wind blows from your left to the top of the bolt to the center of the windage turret, and
your right. Input field. adding half of the diameter of the bolt.
WIND SPEED 1: The wind speed used in the shooting solution. TWIST RATE: The distance it takes for the rifling of your barrel
Input field. to make one full rotation. Rifle twist is often provided by the
WIND SPEED 2: An optional, additional wind speed used in the gun or barrel manufacturer. Input field.
shooting solution. Input field. VERTICAL SIGHT SCALE FACTOR: A linear multiplier that
TIP: You can use two wind speeds to calculate a windage accounts for vertical scaling. Not all rifle scopes track
solution that contains a high and low value. The actual perfectly, so the ballistics solution requires a correction to
windage to apply for the shot should fall in this range. scale according to a particular rifle scope. For example, if a
turret is moved 10 mil but the impact is 9 mil, the sight scale
Target Fields is 0.9. Input field.
DIRECTION OF FIRE: The direction of fire, with north at 0 ZERO HEIGHT: An optional modification to impact elevation at
degrees and east at 90 degrees. Input field. zero range. This is often used when adding a suppressor or
NOTE: The DIRECTION OF FIRE is used only for calculating using a subsonic load. For example, if you add a suppressor
the Coriolis effect. If you are shooting at a target less than and your bullet impacts the target 1 inch higher than
1,000 yards away, this input field is optional. expected, your ZERO HEIGHT is 1 inch. You must set this to
INCLINATION: The angle of inclination of the shot. A negative zero when you remove the suppressor. Input field.
value indicates a downhill shot. A positive values indicates an ZERO OFFSET: An optional modification to impact windage at
uphill shot. The shooting solution multiplies the vertical zero range. This is often used when adding a suppressor or
portion of the solution by the cosine of the inclination angle to using a subsonic load. For example, if you add a suppressor
calculate the adjusted solution for an uphill or downhill shot. and your bullet impacts the target 1 inch to the left of the
Input field. expected impact, your ZERO OFFSET is -1 inch. You must
RANGE: The distance to the target, displayed in yards or set this to zero when you remove the suppressor. Input field.
meters. Input field. ZERO RANGE: The range at which the rifle was zeroed. Input
SPEED: The speed of a moving target, displayed in miles per field.
hour (mph) or kilometers per hour (km/h). A negative value Profile Fields, Gun Properties, Calibrate Muzzle Velocity
indicates a target moving left. A positive value indicates a ENTER RANGE: The distance from the muzzle to the target.
target moving right. Input field. Input field.
Profile Fields, Bullet Properties TIP: You should enter a value as close as possible to the
BALLISTIC COEFFICIENT: The manufacturer's ballistic range suggested in the shooting solution. This is the range
coefficient for your bullet. Input field. where the bullet slows to Mach 1.2 and begins to enter the
TIP: When you use one of the Applied Ballistics custom drag transonic range.
curves, the ballistic coefficient will display a value of 1.000. ENTER TRUE DROP: The actual distance the bullet falls while
BULLET DIAMETER: The bullet diameter measured in inches. in flight to the target, displayed in milliradians (mil) or minute
Input field. of angle (MOA). Input field.
NOTE: The diameter of the bullet may vary from the common Profile Fields, Gun Properties, Calibrate Drop Scale Factor
name of the round. For example, a 300 Win Mag is ENTER RANGE: The range from which you are shooting. Input
actually .308 inches in diameter. field.
Appendix 11
TIP: This range should be within 90% of the recommended
range suggested in the shooting solution. Values that are
less than 80% of the recommended range will not provide a
valid adjustment.
ENTER TRUE DROP: The actual distance the bullet falls when
fired at a specific range, displayed in milliradians (mil) or
minute of angle (MOA). Input field.
12 Appendix
Index R
resetting, device 9
resetting the device 9
A routes 3
accessories 7 creating 3
almanac deleting 3
hunting and fishing times 3 navigating 3
sunrise and sunset times 3
altimeter 4 S
ANT+ sensors, pairing 7 satellite page 8
satellite signals 9
B acquiring 1
backlight 1, 4 settings 2, 4–7, 9
ballistics 2 sharing data 8, 9
barometer 4 smartphone
battery 8 applications 7
installing 1 pairing 7
maximizing 4, 9 software
storage 1 license 8
Bluetooth technology 7 updating 9
C version 8
calendar 3 specifications 8
calibrating, altimeter 4 storing data 8
cleaning the device 8 sunrise and sunset times 3
compass 1, 2, 4 T
calibrating 4 tempe 7
computer, connecting 8 temperature 7, 8
countdown timer 2 timer 6
customizing the device 4 countdown 2
D tones 2
TracBack 3
data, transferring 8
tracks 3, 4
data fields 4, 5
deleting 4
deleting, all user data 8
editing 4
E navigating 3
elevation 1, 4 settings 6
training 7
F transferring, files 8, 9
files, transferring 8 trip computer 4
trip information 1, 4
G trip planner. See routes
Garmin Connect 7 troubleshooting 9
Garmin Express 9
updating software 9 U
GPS 1 unit ID 8
satellite page 8 USB
settings 6 connector 1
signal 9 disconnecting 8
user data, deleting 8
H
hunting and fishing times 3 V
VIRB remote 2
I
icons 2 W
WAAS 6
J water resistance 8
jumpmaster 7 water resistence 8
waypoints 2, 3
K deleting 3
keys 1, 8
editing 2, 3
L navigating 3
locations projecting 3
editing 2, 3 saving 2
saving 2 wrist strap 1
M
main menu 1
maps 1, 2
settings 4, 7
measuring distance 3
N
navigation, stopping 3
P
pairing
ANT+ sensors 7
smartphone 7
power key 1
Index 13
support.garmin.com