Professional Documents
Culture Documents
Clients PO No:
Kindly complete the following information checklist to enable us to proceed with your
Quotation/Order
Design Conditions
Closure design code usually PD 5500 or ASME VIII Div 1 ASME VIII Div 1
Vessel Design Code (PD 5500 / ASME VIII or B31.4 ,
B 31.8 or another)
Design Factor with B31.8 code 0.4, 0.5, 0.6, 0.72, or 0.8
U stamping required No
Other design factor (if not stated above)
MDMT in Fahrenheit For U Stamped Closures only
MAWP in PSI For U Stamped Closures only
1010 psig for Pig Launcher
Design Pressure (Bar G / Psig) 900 psig for Pig Receiver
Hydrostatic test Pressure (Bar G / Psig)
150 oF for Pig Launcher
Design Temperature - Minimum and Maximum in (C or F) 150 oF for Pig Receiver