Professional Documents
Culture Documents
1. Which of the following instrument will have same calibration on A.C. and D.C.?
a) Moving coil instruments
b) Moving iron instruments
c) Induction type instruments
d) Electrodynamometer instruments
3. The air fraction damping is used for the instruments which have
a) Very high magnetic field
b) Very low magnetic field
c) Zero magnetic field
d) (a) or (b)
4. CT is used to
a) Step down the current
b) Step up the current
c) Step up the current but step down the voltage
d) Measure very high currents
5. A Voltmeter should have
a) Infinite resistance
b) Very high resistance
c) Low resistance
d) Zero resistance
7. Two voltmeters each with the range of 0-100 V and resistances 40,000 Ω and
10,000 Ω respectively are connected in series across the power supply source of
50 V. The voltmeters will indicate
a) 40 V, 10 V respectively
b) 30 V, 20 V respectively
c) 50 V, 0 V respectively
d) 20 V, 30 V respectively