This document lists SMS commands that can be used to control and configure a device. Some of the commands include setting the APN, turning vibration alarms on/off, setting an admin phone number, adding an SOS number, setting upload and sleep intervals, restarting GPS, restoring factory settings, setting the device IP and port, controlling an over-speed alarm, setting the password, arming and disarming the device, restoring defaults, and controlling power off and fuel cut alarms.
This document lists SMS commands that can be used to control and configure a device. Some of the commands include setting the APN, turning vibration alarms on/off, setting an admin phone number, adding an SOS number, setting upload and sleep intervals, restarting GPS, restoring factory settings, setting the device IP and port, controlling an over-speed alarm, setting the password, arming and disarming the device, restoring defaults, and controlling power off and fuel cut alarms.
This document lists SMS commands that can be used to control and configure a device. Some of the commands include setting the APN, turning vibration alarms on/off, setting an admin phone number, adding an SOS number, setting upload and sleep intervals, restarting GPS, restoring factory settings, setting the device IP and port, controlling an over-speed alarm, setting the password, arming and disarming the device, restoring defaults, and controlling power off and fuel cut alarms.
1. APN Setting: Setting APN command:apn123456+space+apn name Eg:apn123456 cmnet Reply:apn ok
2. Turn on SMS Vibration alarm:125, eg: 125
Reply:vibrator sms alarm set ok 3. Turn off SMS vibration alarm:126, eg:126 Reply:no vibrate sms alarm set ok 4. Turn on vibrate phone alarm:122, eg:122 Reply:vibrate phone alarm set ok 5. Turn off vibrate phone alarm:121, eg:121 Reply:no vibrate phone alarm set ok 6. Setting admin’s phone number: SMS Command:admin+password+space+phone number eg:admin123456 13712345678 Reply:admin ok 7. Delete admin’s phone number: SMS Command:noadmin123456 eg:noadmin123456 Reply:ok 8. Adding SOS phone number: SMS Command:sos+password+space+phone number eg:sos123456 13712345678 Reply:sos number ok 9. Delete SOS phone number: SMS Command:nosos123456 eg:nosos123456 Reply: ok 10. Setting up the upload interval time: SMS Command:freq,123456,20 Reply: ok(20S) 20 is the number of seconds. 11. Setting sleep time: SMS Command:static,123456,120 Reply: ok(120S) 120 is the number of seconds. 12.GPS restart: SMS Command:CQGPS 13.Restore factory settings: SMS Command:FORMAT 14.Device restart: SMS Command:CQ 15.Check the device information: SMS Command:CXZT 16.Setting IP & Port: SMS Command:IP+space+Port Eg:IP 202.104.71.210 3032 Reply:set IP ok 17.Over-speed alarm: Setting limited speed:speed123456 080 set speed limited 80KM/H Turn off over-speed SMS alarm:speed123456 000 Reply:speed ok Turn on over-speed SMS alarm:speed123456 080 Reply:speed ok 18.Set up password: password123456 666888 Eg:password123456 666888, Reply:password ok(666888) 19.Set up arm/disarm by SMS: Arm:SF Reply:SF OK Disarm:CF Reply:CF OK 20.Restore factory default settings: SMS Command:FORMAT Reply:OK
21. Power off alarm:
power off alarm by sms enable: pwrsms123456,1 power off alarm by sms disable: pwrsms123456,0 power off alarm by call enable: pwrcall123456,1 power off alarm by call disable: pwrcall123456,0
22. Fuel cut by SMS (Speed < 20KM/H)(OILSPD,123456,20 )