Professional Documents
Culture Documents
Commitment: Trakker, A Professional at Work
Commitment: Trakker, A Professional at Work
Via Puglia, 35
10156 Torino - Italy
www.iveco.com
COMMITME
CONTENTS
COMMITMENT p. 2
PERFORMANCE p. 4
COMFORT p. 6
The cab
At your command p. 8
The longer the job,
the greater the comfort p. 10
PERSONALITY p. 12
Exterior design
Personality, image and functionality
at work p. 14
RELIABILITY p. 16
Engines
Cursor engines, power at work p. 18
VGT and CEB p. 19
Cursor 8 p. 20
Cursor 13 p. 21
Gearboxes
Mechanical gearbox p. 24
Eurotronic automated gearbox p. 25
Suspension
Stability where you need it p. 29
Line up p. 30
Financial services
Tailor-made solutions with Iveco Capital p. 34
Controls
The controls of the
radio and onboard
computer are located
on the steering wheel.
Below them, the right
hand stalk groups
together the vehicle
speed controls: gear
change (Eurotronic)
engine brake, optional
hydraulic retarder
and cruise control
AT YOUR COMMAND
One feature is very obvious and highly on the door-side armrest, together with
appreciated by people who choose the Trakker: the optional electrical door mirror adjustment
the drive quality. In every cab, drivers will find controls. The electronic digital tachograph
an ideal driving position thanks to the adjustable is positioned above the driver, next to the
steering wheel and the pneumatically-sprung radio/CD; the radio/CD controls are duplicated
seat, which adapts to the driver’s weight, slides on the steering wheel, with the radio stations
forwards and backwards, and is adjustable for displayed on the instrument cluster, thereby
height and rake. All of the functions are displayed keeping possible distractions to a minimum.
on the instrument cluster and all the controls The floor is covered in a new, more
are easy to see and to reach, ensuring that wear-resistant material that is easier to wash;
the driver controls the vehicle in total safety. the facia is made of soft-touch, scratch resistant
The EuroTronic gear change, engine brake, material. The living space in the cab is both
optional hydraulic intarder, cruise control practical and ergonomic; the upper storage area
and radio and are all positioned ergonomically, incorporates two open storage compartments
where they can be activated without the driver and there are also two under seat storage areas
needing to take his hands off the wheel. and door pockets with space for a 2 litre drinks
The electrical window controls are located bottle. There is space for everything.
8 9
AT Sleeping area
On the Trakker
Active Time
Standard
or High Roof,
one or two bunks
provide more
comfort
Ergonomics
The steering wheel
has a pneumatic
adjustment system,
operated via
a pushbutton
on the floor,
ensuring that
all drivers will find
their optimal
driving position
where height
and rake are
concerned
Storage
compartment
The bunk is made
THE LONGER THE JOB, up of three sections
THE GREATER THE COMFORT that lift up.
The quality of life on board the Trakker is comparable The centre section
to that of an on-road vehicle: roomy and comfortable, is 82 cm wide,
even when outdoor conditions are not welcoming. which converts
For missions that require the driver to sleep on board, into a comfortable
the Trakker offers the Active Time cab, whose sleeping bunk that conceals
area guarantees relaxation and rest. The Active Time a bottle holder,
is 1.82 m high, with one or two bunks and offers plenty document pocket
of storage compartments, and different solutions and as an option
that focus on ergonomics, providing plenty of space either an isothermal
and quality for life on board. or refrigerated
compartment.
10 11
PERSONALITY Design, power and functionality
make the Trakker the ideal
working companion.
AD Access to the cab
The lower step
anchorage system
has been reinforced
and access has been
simplified
Radiator
protection
Constructed of steel External storage
and recommended boxes
for off-road The AT version
applications, features two
it protects the external storage
radiator from compartments
accidental damage, which can only
in severe off road be opened from
conditions. inside the cab,
for greater security
Bumpers
Robust and made
of steel, the bumper
has been PERSONALITY, IMAGE AND
constructed in three FUNCTIONALITY AT WORK
sections to reduce
For Iveco, respecting the driver means offering him not only an ideal hyper-resistant steel radiator protection is particularly useful
the cost
vehicle to work in, but one with a robust, functional design. for extreme off road applications.The generous space on the front
of replacement
The Trakker is clear proof of this: it has evolved styling, an unmistakable between the “Iveco” and “Trakker” logos allows the customer to insert
if it is damaged
line, and a modern look but retains its functionality and practicality their own company name. The lower part of the bumper is rounded
at all times. The redesigned grille provides for improved engine cooling. and incorporates a step that the driver can use to clean the windscreen.
Headlights
The lines of the cab make it easier to keep the vehicle clean. Access to the cab is simplified by the large grab handles and steps
The halogen
The headlights are incorporated into the three piece steel bumper, have a non-slip surface.
headlights are
and are protected by removable grilles. There are two new large practical The rear-view mirrors and the new passenger side front view mirror,
protected by their
external storage boxes, which are internally illuminated. The optional provide enhanced visibility and thus greater safety.
recessed position
and removeable
grilles
RELIABILITY
of the engines, components and assemblies, ensure
that the Trakker is always operational, and able
to tackle the most difficult situations.
The more difficult and demanding the working
conditions, the more essential it is for the customer
to know he can count on the productivity
of a reliable vehicle that continues working
relentlessly.
CURSOR 8 CURSOR 13
The Cursor 8 is available with a choice of three power outputs This is ideal for more demanding applications, in difficult environments
(310 Hp with a conventional turbo, 330 and 360 Hp with a variable and harsh conditions. There are three power levels: 410
geometry turbo); it has a total capacity of 7,790 cc and 6 cylinders in line (with a turbocharging system and a “waste-gate” valve), 450 and 500 Hp
and meets Euro 5 requirements. The 330 Hp version is ideal for (both with a variable geometry turbo, which deliver a high torque at low
6x4 construction industry work, and concrete mixers. The 360 Hp version engine speeds). With a capacity of 12,880 cc with 6 cylinders in line,
is recommended for 8x4 construction industry work, and concrete mixers. the Cursor 13 also meets Euro 5 requirements regarding exhaust emissions.
to 500 Hp. The configuration with 6 cylinders to a minimum, while the four valves per cylinder 300 3000 300 3000 300 3000 300 3000 300 3000 300 3000
in line, overhead camshaft and rear timing gear guarantee very efficient air flow and combustion 250 2500 250 2500 250 2500 250 2500 250 2500 250 2500
makes for a compact size, fewer components gas elimination. The Cursor engines are suitable 200 2000 200 2000 200 2000 200 2000 200 2000 200 2000
and, above all, outstanding structural rigidity, for all types of driving, and they deliver 150 150 150 150 150 150
1500 1500 1500 1500 1500 1500
thanks to the monoblock cylinder head maximum torque below 1,000 rev/min,
100 1000 100 1000 100 1000 100 1000 100 1000 100 1000
and below it the two section engine block, and maintain it throughout the engine rpm range.
50 500 50 500 50 500 50 500 50 500 50 500
which combines six wet type cylinder liners This condition simplifies hill starts with full loads,
and seven crankshaft bearings in a single reduces clutch wear and guarantees flexible 1800
1800
1800
1800
1800
1800
600
800
1000
1200
1400
1600
2000
2200
2400
600
800
1000
1200
1400
1600
2000
2200
2400
600
800
1000
1200
1400
1600
2000
2200
2400
600
800
1000
1200
1400
1600
2000
2200
2400
600
800
1000
1200
1400
1600
2000
2200
2400
600
800
1000
1200
1400
1600
2000
2200
2400
component. The result: is less vibration, less and quiet operation, fewer gear changes, [rpm] [rpm] [rpm] [rpm] [rpm] [rpm]
noise and safe, fluid operation in all situations. and lower fuel consumption.
18 20 21
ENGINES
vgt
The Cursor engines on the Trakker Active Time and Active Day (except for the 310 Hp Cursor 8
and 410 Hp Cursor) are fitted with variable geometry turbochargers (VGT), the only engines
in the heavy duty sector to do so. This turbocharging system makes a decisive contribution to the high
performance of the engines, enhancing their performance and acceleration. The VGT is fitted with
an electronic device that adapts the characteristics of the turbocharger to the engine revs: thanks
to the coaxial movement of the impeller, the turbocharger adapts to the volume of incoming
exhaust gas, allowing permanent monitoring of the speed, and thus increasing the pressure, a value
that is closely linked to power and torque. The VGT also improves the performance of the engine
(decompression) brake known as the ITB (Iveco Turbo Brake).
CEB
The Combined Engine Brake (fitted on the 410 Hp Cursor 13) is a more powerful engine brake
that combines two effects: exhaust vacuum and decompression engine braking. A throttle valve
on the exhaust manifold creates a counter-pressure in the exhaust gases that helps to slow down
the engine rotation and increase the braking effort.
POWER TORQUE
MORE RESPECT FOR THE ENVIRONMENT
Engine Capacity Turbo Hp (kw) rpm Nm rpm
Thanks to the energy and resources dedicated to studies and the by an electronic dosing unit. SCR technology, which is designed to work Lower emissions,
CURSOR 8 7790 cc FG 310 (228) 2400 1300 1200 ÷ 1675 lower consumption
application of new technologies, Iveco is able to present innovative throughout the entire life-time of the vehicle, makes a particulate trap
solutions that respect Euro 5 environmental protection standards unnecessary, and guarantees low emissions, requires minimal maintenance, The SCR system
VGT 330 (243) 2400 1400 1080 ÷ 1655
and improve the performance and productivity of its vehicles. and helps to increase the productivity of the vehicle: lower emissions, intervenes directly
VGT 360 (265) 2400 1500 1125 ÷ 1685 The Trakker adopts SCR technology (Selective Catalytic Reduction) lower consumption. This system offers more power and more torque to control the
for the post-treatment of exhaust gases. Selective Catalytic Reduction uses with the same cylinder capacity, lower weight, lower consumption thanks nitrogen, and this,
CURSOR 13 12880 cc WG 410 (302) 1900 1900 1000 ÷ 1515 together with the
highly efficient engines, a catalytic convertor instead of the usual silencer to the increased injection pressure, less energy absorbed to eliminate
VGT 450 (332) 1900 2200 1000 ÷ 1435 and a specific tank for the AdBlue that is injected upstream of the catalyst heat, fewer oil changes and therefore longer maintenance intervals. optimised combustion
process, makes
VGT 500 (368) 1900 2300 1000 ÷ 1525 it possible to reduce
fuel consumption
FG Fixed geometry VGT Variable geometry turbocharger WG Waste Gate and particulate
emissions
EuroTronic
To improve
ergonomics
and increase safety,
the gear lever
is mounted on the
steering column.
The Drive (D),
Reverse (R) and
Neutral (N) switches
are positioned
in a module on the
dash board
Brakes
Discs on the front
and rear axles for
single reduction axles,
with duo-duplex
drums on the rear
axles for hub reduction
axles. For models
with all-wheel drive,
duo-duplex drum
brakes on all wheels
SEMIELLIPTICAL
Chassis
Made of high yield
steel, available
in two thicknesses:
7.7 mm for normal
duty and 10 mm
for more demanding
applications
PARABOLIC
AIR ECAS
The Electronically
Controlled Air STABILITY WHERE YOU NEED IT
Suspension system
The reliability and robustness of the chassis have always been important
controls
strengths of Iveco vehicles, and are even more evident on the Trakker.
and maintains
They are made of double-bottle-neck U-section steel side members
the chassis height
(Fe E 490), which come in two thicknesses, and are ideal for tackling
all types of terrain and load types whatever the operating conditions.
Maximum strength is provided by a choice of suspensions: mechanical
with parabolic springs or mechanical with semielliptical springs:
for greater comfort and optimal driving stability, three and four-axle
models are available, with four bag air suspension combining
an ECAS (Electronically Controlled Air Suspension) system.
28 29
CUSTOMER-SERVICE, PARTS AND OPTIONS
SERVICES
Original Parts. Iveco original parts guarantee that Specialist technicians. No one knows your Trakker better
the performance and value of your Trakker are maintained than the people who built it. Which is why Iveco constantly
over time. organises training and refresher courses for its technical staff,
Choosing Iveco original parts means trusting the quality to guarantee maximum efficiency and capability in solving
of the manufacturer and the professional skills of expert problems, backed up by cutting-edge diagnostic systems and top
technicians who have an in-depth knowledge of the product quality service. All in order to get the vehicle back on the road
thereby ensuring a reliable vehicle. as soon as possible, because the customers’ needs always come
With Service Points throughout Europe you are never first.
on your own and thanks to a prompt, efficient distribution
network, any available replacement parts will be delivered Iveco Shop. Design, technological innovation and performance
within 24 hours in 99% of cases. are the essential values of these products. This vast range
A further demonstration of the seriousness and reliability of accessories offers new solutions designed to satisfy practical
of a leading commercial vehicle manufacturer, which has and aesthetic, stylistic and aerodynamic demands at one and
succeeded in making quality and service its trump cards over the same time.
the years. A range of accessories worthy of the vehicle’s performance
in every way: products designed to customise your vehicle’s cab
with style, making it a welcoming environment and enhancing
the exterior, while guaranteeing driving safety and comfort
in traffic.
A catalogue that illustrates the vast range of Iveco shop
accessories is available from the Iveco network.
34 35
This catalogue does not end here, but continues online.
All the information and details that you need regarding
the new Trakker are available from the Iveco Internet
site. At the click of the mouse.
www.iveco.co.uk
www.iveco.com
The All Blacks logo, the Silver Fern Device and ALL BLACKS® The information and pictures contained in this catalogue
are registered trademarks of the NZRU. are purely indicative. Iveco reserves the right to make any changes
it deems necessary for manufacturing or commercial reasons,
at any time and without notice.
36
Iveco S.p.A.
Via Puglia, 35
10156 Torino - Italy
www.iveco.com
COMMITME