Corena K Shell Gas Compressor Oil S1 P•• RELIABLE PERFORMANCE HYDROCARBON GAS Gas Compressor Oil APPLICATIONS
Shell Gas Compressor Oil S1 P provides reliable performance for
cylinder lubrication of reciprocating compressors handling hydrocarbon gas at high pressure. They are compounded with polar or fatty oils which enable the lubricant to resist being washed off cylinder walls by the action of wet air or gas. Shell Gas Compressor Oil S1 P also resist the solvent action of hydrocarbon gases such as propane and butane, as well as certain organic chemicals such as ketones and aldehydes. forming deposits on the surfaces of Performance Benefits the crankcase and plugging oil passages. • Extended Maintenance Intervals Resists wash-off by wet air or gas Health and Safety and chemical solvents to ensure continued lubrication and protection Shell Gas Compressor Oil S1 P is to help reduce wear and maintenance unlikely to present any significant downtime and increase operational health or safety hazard when properly availability and efficiency used in the recommended application, and good standards of industrial and personal hygiene are maintained. Applications Avoid contact with skin. Use impervious gloves with used oil. • Reciprocating compressors having After skin contact, wash immediately separate cylinder lubrication with soap and water. systems For further guidance on Product Health & Safety refer to the •Compression of wet air, wet appropriate Shell Product Safety Data hydrocarbon, natural gas or certain Sheet. chemically active gases
• Use for pressures below 1000 psi Seal Compatibility
(Shell Corena K 100, Shell Corena K 150) Shell Gas Compressor Oil S1 P may be used with most common seal and • Pressures above 1000 psi (Shell packing materials. Gas Compressor Oil S1 P 460) Protect the Environment • Bearings and machine parts of Take used oil to an authorized equipment requiring compounded collection point. Do not discharge products into drains, soil or water. These oils should not be used to lubricate the running gear or crankcases of compressors as the fatty Advice oil can separate from the lubricant, Advice on applications not covered in this leaflet may be obtained form your Shell Representative.
Shell Lubricants 23/08/2011
Page 1 of 2 Technical Data Sheet
Typical Physical Characteristics
Shell Gas Compressor Oil S1 P 100 150 460
Kinematic Viscosity ISO 3104 at 40°C 2 mm / s 95 139 413 at 100°C mm 2/ s Viscosity Index ISO 2909 100 102 95 Flash Point COC °C ISO 2592 249 273 309 Pour Point °C ISO 3016 -9 -9 -9 Density at 15°C kg/ m3 ISO 12185 0.887 0.893 0.901 These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in these characteristics may occur.