Professional Documents
Culture Documents
WWW.FEMYERS.COM
SOLIDS HANDLING WASTEWATER PUMPS
Product Capabilities
Capacities To 2100 gpm 8000 lpm
Heads To 275 ft. 84 m
Solids Handling 3 in. 76 mm
Liquids Handling raw unscreened sewage,
drain water, effluent
Intermittent Liquid Temp. up to 140°F up to 60°C
Winding Insulation Temp. (Class H) 356°F 180°C Construction Materials
Available Motors 1750 RPM Motor Housing, Seal Housing, cast iron, Class 30,
75, 100, 125 HP Cord Cap and Volute Case ASTM A48
460 & 575 volts
3 phase, 60 Hz Impeller ductile iron, Class 65, ASTM A536
Std. Third Party Approvals CSA Power and Control Cord SOOW, W
Optional Approvals FM Class 1, Groups C & D Double Tandem
(4VLX only) Standard – carbon & ceramic
Mechanical Seals
Optional – lower tungsten carbide
Acceptable pH Range 6–9
Specific Gravity .9 – 1.1 Pump, Motor Shaft 416 SST
Viscosity 28 – 35 SSU Fasteners 300 series SST
Discharge, Horizontal 4 in. 101.6 mm Case Wear Ring bronze
Note: Consult factory for applications outside these recommendations.
2
SOLIDS HANDLING WASTEWATER PUMPS
K. Pump-out Vanes
A. Cable Entry System Help keep trash from seal,
Cable jackets sealed with clamped, rubber reduce pressure at seal faces.
grommet. Individual wires sealed with epoxy to
prevent wicking in case of cable damage.
L. Bronze Wear Ring
Reduces bypass leakage and wear.
B. Terminal Board Replaceable to restore original running
Provides easy connections from power and clearances and pump efficiencies.
control cables to stator. Allows voltage change in
field on dual winding motors.
WWW.FEMYERS.COM 3
Performance Data and Dimensions
1750 RPM [Dimensions in mm]
11 1
4
1
15 2
[287] [394]
11 43
[299]
9 [229]
10 3
4 4" STD
[274] Flange
44 7 [1139]
8
5 1 [130]
8
3 3 [95]
4
STAND
OPTIONAL
111 [285] 211 [538]
4 4
5
12 8 [320]